PoE-MIB Table View

A table that is used to configure PoE system information based on Unit ID.
The Unit ID is used for stacking.

swPoESystemStackingCtrlEntry row .1.3.6.1.4.1.171.12.24.1.11.1

A list of PoE system information based on Unit ID.

Indexes

swPoESystemStackingCtrlUnitId

Column	Syntax	OID
swPoESystemStackingCtrlUnitId This object indicates the device's Unit ID. A unit ID of zero denotes a stand-alone device.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.24.1.11.1.1
swPoESystemStackingCtrlPowerLimit The power budget (in watts) of the PoE sytem.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.1.11.1.2
swPoESystemStackingCtrlPowerDisconnectMethod The power management disconnection method. When the total consumed power exceeds the power budget, the PoE controller initiates port disconnection to prevent overloading the power supply. The controller uses one of the …	Enumerationr/w Enumerated Values: 1 denyNextPort 2 denyLowPriorityPort	.1.3.6.1.4.1.171.12.24.1.11.1.3
swPoESystemStackingCtrlManagementMode This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The system will automatically determine the …	Enumerationr/w Enumerated Values: 1 power-limit 2 auto	.1.3.6.1.4.1.171.12.24.1.11.1.4
swPoESystemStackingCtrlLedMode Specifies the system mode to be POE or NORMAL.	Enumerationr/w Enumerated Values: 1 normal 2 poe	.1.3.6.1.4.1.171.12.24.1.11.1.5
swPoESystemStackingCtrlLegacyPD The legacy PD detection state. Enables or disables legacy PD detection on PoE unit.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.24.1.11.1.6

A table that contains PoE system information based on Unit ID.
The Unit ID is used for stacking.

swPoESystemInfoEntry row .1.3.6.1.4.1.171.12.24.2.1.1

A list of PoE system information based on Unit ID.

Indexes

swPoESystemInfoUnitId

Column	Syntax	OID
swPoESystemInfoUnitId This object indicates the device's Unit ID. A unit ID of zero denotes a stand-alone device.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.24.2.1.1.1
swPoESystemInfoPowerConsumption The actual momentary power consumption (in watts) in the PoE system.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.2.1.1.2
swPoESystemInfoPowerRemained The actual momentary remaining power (in watts) in the PoE system.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.2.1.1.3
swPoESystemInfoPowerLimit The power budget (in watts) of the PoE sytem.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.2.1.1.4
swPoESystemInfoPowerDisconnectMethod The power management disconnection method. When the total consumed power exceeds the power budget, the PoE controller initiates port disconnection to prevent overloading the power supply. The controller uses one of the …	Enumeration Enumerated Values: 1 denyNextPort 2 denyLowPriorityPort	.1.3.6.1.4.1.171.12.24.2.1.1.5
swPoESystemInfoManagementMode This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The system will automatically determine the…	Enumeration Enumerated Values: 1 power-limit 2 auto	.1.3.6.1.4.1.171.12.24.2.1.1.6
swPoESystemInfoLegacyPD The current status of legacy PD detection.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.24.2.1.1.7

A table that contains PoE configuration about every port in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device;
N+1 -- 2N describe the port number of BoxId 2 device;
2N+1 -- 3N describe the port number of BoxId 2 device;
......

swPoEPortCtrlEntry row .1.3.6.1.4.1.171.12.24.3.1.1

A list of PoE configurations for each port of the device in this stack.

Indexes

swPoEPortCtrlPortIndex

Column	Syntax	OID
swPoEPortCtrlPortIndex This object indicates the devices' port number in this stack. If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device; N+1 -- 2N describe the port number of BoxId 2 device; 2N+1 -- 3N d…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.24.3.1.1.1
swPoEPortCtrlState The PoE port state. Enables or disables the PoE function on the specific port. The default setting is enable.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.171.12.24.3.1.1.2
swPoEPortCtrlPriority The PoE port priority. Port priority affects power-up order (after a rest, the ports are powered up according to their priority) and shutdown order (when exceeding the power budget, the ports are shut down according to …	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.171.12.24.3.1.1.3
swPoEPortCtrlPowerLimit There are 4 pre-defined values for users' convenience to set the upper power limit for class 0, class 1, class 2, and class 3. class_0: 15400mW (The maximum power provided by PSE (switch) is 12.95 W + power loss on cabl…	Enumerationr/w Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 user-defined	.1.3.6.1.4.1.171.12.24.3.1.1.4
swPoEPortCtrlUserDefined User defined per-port power limit (in milliwatts). If a port exceeds 10% of its power limit, the PoE system will shut down that port. The default setting is 15400 mW. Note: This object is valid only while the swPoEPortC…	Integer32r/w Constraints: range: 1000-35000	.1.3.6.1.4.1.171.12.24.3.1.1.5
swPoEPortCtrlTimeRangeName Specifies the time_range that applies to the port of the POE.If time range is configured, power can only be supplied during the period specified by the time range.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.12.24.3.1.1.6

A table that contains PoE information about every port in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxID 1 device;
N+1 -- 2N describe the port number of BoxID 2 device;
2N+1 -- 3N describe the port number of BoxID 2 device;
......

swPoEPortInfoEntry row .1.3.6.1.4.1.171.12.24.4.1.1

A list of PoE information for each port of the device in this stack.

Indexes

swPoEPortInfoPortIndex

Column	Syntax	OID
swPoEPortInfoPortIndex This object indicates the devices' port number in this stack. If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device; N+1 -- 2N describe the port number of BoxID 2 device; 2N+1 -- 3N d…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.12.24.4.1.1.1
swPoEPortInfoClass The power class of the PD according to 802.3af definitions: class 0: PD power consumption is within 0.44-12.95 watts, class 1: PD power consumption is within 0.44-3.84 watts, class 2: PD power consumption is within 3.84…	Integer32 Constraints: range: 0-4	.1.3.6.1.4.1.171.12.24.4.1.1.2
swPoEPortInfoPower The port power consumption (in milliwatts).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.4.1.1.3
swPoEPortInfoVoltage The port input line voltage (in decivolts).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.4.1.1.4
swPoEPortInfoCurrent The port current (calculated in milliamps).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.24.4.1.1.5
swPoEPortInfoStatus The string describes the PoE port current status.	OctetString Constraints: range: 0-76	.1.3.6.1.4.1.171.12.24.4.1.1.6
swpoEPortInfoLedStatus The LED display for PoE port status. on (1): power is provided to the port on which a 802.3af-compliant or legacy PD is connected, off(2): no power is provided to the port where there aren't any errors, error(…	Enumeration Enumerated Values: 1 on 2 off 3 error	.1.3.6.1.4.1.171.12.24.4.1.1.7