PWE3MGR Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
104

zxr10MplsL2vpnPWMgrTable

table
.1.3.6.1.4.1.3902.3.104.8.1.1 · 1 row entry · 62 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxr10MplsL2vpnPWMgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PWE3MGR' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PWE3MGR::zxr10MplsL2vpnPWMgrTable' 
Mpls L2vpn PW manage table
zxr10MplsL2vpnPWMgrEntry row .1.3.6.1.4.1.3902.3.104.8.1.1.1
Manage information of Mpls L2vpn PW configured on a PE
Indexes
Column Syntax OID
zxr10MplsL2vpnPWMgrPwName
Name specified for each configured MPLS L2VPN PW.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.1
zxr10MplsL2vpnPWMgrServName
Name specified for each configured MPLS L2VPN service instance.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.2
zxr10MplsL2vpnPWMgrServType
MPLS L2VPN service instance type,including: VLL, VPLS and MSPW.
MplsL2vpnType
Type Values:
0l2vpn-UNKNOWN
1l2vpn-VPLS
2l2vpn-VLL
3l2vpn-MSPW
4l2vpn-vls
5l2vpn-VLANVLL
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.3
zxr10MplsL2vpnPWMgrPwMode
MPLS L2vpn PW mode,including: static, dynamic-Martini, dynamic-PWE3.
MplsL2vpnPWModer/w
Type Values:
0unknown
1static
2dynamic-PWE3
3dynamic-Martini
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.4
zxr10MplsL2vpnPWMgrPwType
MPLS L2VPN local PW type,including: FR-DLCI,ATM-AAL5,
ATM-TRANSCELL,ETH-VLAN,ETH,etc..
MplsL2vpnPWType
Type Values:
0pwType-unknown
1pwType-FR-DLCI-Martini
2pwType-ATM-AAL5-SDU
3pwType-ATM-TRANSCELL
4pwType-ETH-VLAN
5pwType-ETH
6pwType-HDLC
7pwType-PPP
8pwType-CEP-MPLS
9pwType-ATM-NToOne-VCC
10pwType-ATM-NToOne-VPC
11pwType-IP-Layer2-Trans
12pwType-ATM-OneToOne-VCC
13pwType-ATM-OneToOne-VPC
14pwType-ATM-AAL5-PDU
15pwType-FR-Port
16pwType-CEP-Packet
17pwType-E1
18pwType-T1
19pwType-E3
20pwType-T3
21pwType-CESoPSN-Basic
22pwType-TDMoIP-AAL1
23pwType-CESoPSN-TDM
24pwType-TDMoIP-AAL2
25pwType-FR-DLCI
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.5
zxr10MplsL2vpnPWMgrPeerAddr
Router ID of remote PE.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.6
zxr10MplsL2vpnPWMgrVcId
Mpls L2vpn VCID value on a PE.
Unsigned32r/w
Constraints:
range: 1-4294967294
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.7
zxr10MplsL2vpnPWMgrLocalLabel
Static PW internal label locally configured.If the label is not
yet known, the object should return a value of 0xFFFFFFFF.
Unsigned32r/w
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.8
zxr10MplsL2vpnPWMgrRemoteLabel
Static PW internal label configured for remote peer.If the label
is not yet known, the object should return a value of 0xFFFFFFFF.
Unsigned32r/w
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.9
zxr10MplsL2vpnPWMgrTunnelId
This value represents Id of TE tunnel
for this PW to be carried on. It will be zero otherwise.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.10
zxr10MplsL2vpnPWMgrPwClassName
Name specified for each configured MPLS L2VPN PW Class.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.11
zxr10L2vpnPWMacLimit
MPLS L2VPN PW MAC limit value on a PE.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.12
zxr10L2vpnPWMacLearnEnable
MPLS L2VPN PW MAC learn enable or disable.
MplsL2vpnMacLearnEnableTyper/w
Type Values:
0unknown
1disable
2enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.13
zxr10L2vpnPWMacLearnRateLimit
MPLS L2VPN PW MAC learn rate limit value
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.14
zxr10L2vpnPWMacLearnRateLimitPolicy
MPLS L2VPN PW MAC learn rate limit policy
L2vpnMacLearnRateLimitPolicyr/w
Type Values:
0learn-policy-default
1learning-disable
2learn-policy-unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.15
zxr10L2vpnPWMacLearnRateLimitResumeTime
MPLS L2VPN PW MAC learn rate limit resume time
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.16
zxr10L2vpnPWMacLearnStatus
MPLS L2VPN PW MAC learn status
L2vpnPwMacLearnStatus
Type Values:
0pw-mac-not-learn
1pw-mac-learn
2pw-mac-learn-unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.17
zxr10L2vpnPWMacMoveRateLimit
MPLS L2VPN PW MAC move rate limit value
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.18
zxr10L2vpnPWMacMoveRateLimitPolicy
MPLS L2VPN PW MAC move rate limit policy
L2vpnMacMoveRateLimitPolicyr/w
Type Values:
0move-policy-default
1moving-disable
2move-policy-unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.19
zxr10L2vpnPWMacMoveRateLimitResumeTime
MPLS L2VPN PW MAC move rate limit resume time
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.20
zxr10L2vpnPWMacMoveStatus
MPLS L2VPN PW MAC move status
L2vpnPwMacMoveStatus
Type Values:
0pw-mac-not-move
1pw-mac-move
2pw-mac-move-unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.21
zxr10L2vpnPWLearnMacCount
MPLS L2VPN PW learn MAC count
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.22
zxr10L2vpnPWStaticMacCount
MPLS L2VPN PW static MAC count
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.23
zxr10MplsL2vpnPWMgrCell
MPLS L2VPN PW cell,<1-32>,default 1
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.24
zxr10MplsL2vpnPWMgrMapping
MPLS L2VPN PW mapping,1:1vpc/1:1vcc/n:1
MplsL2vpnPwMapping
Type Values:
0n-one
1one-one-vpc
2one-one-vcc
3unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.25
zxr10MplsL2vpnPWMgrSimulationMode
MPLS L2VPN PW simulation mode,aal1/pwe3
MplsL2vpnPwSimulationModer/w
Type Values:
0pwe3
1aal1
2unknown
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.26
zxr10MplsL2vpnPWMgrEncapsulatedDelay
MPLS L2VPN PW encapsulated delay,<1-40>,default 8
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.27
zxr10MplsL2vpnPWMgrVariationDelay
MPLS L2VPN PW variation delay,<0-400>,default 80
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.28
zxr10MplsL2vpnPWMgrSequence
MPLS L2VPN PW sequence,enable/disable
MplsL2vpnGenFlagr/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.29
zxr10MplsL2vpnPWMgrVpidVcid
MPLS L2VPN PW vpidvcid
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.30
zxr10MplsL2vpnPWMgrForwardType
MPLS L2VPN PW forward type,including: hub, spoke.
MplsL2vpnPWForwardType
Type Values:
0pw-UNKNOWN
1pw-SPOKE
2pw-HUB
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.31
zxr10MplsL2vpnPWMgrBfdBind
MPLS L2VPN PW whether bind bfd,including: disable,enable
MplsL2vpnPWBFD
Type Values:
0no
1yes
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.32
zxr10MplsL2vpnPWMgrMinTxInterval
Control packet min send time interval
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.33
zxr10MplsL2vpnPWMgrMinRxInterval
Control packet min receive time interval
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.34
zxr10MplsL2vpnPWMgrMult
send or receive control packet detect times
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.35
zxr10MplsL2vpnPWStatusNotify
l2vpn pw status notification
MplsL2vpnPWStatusNotifyr/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.36
zxr10MplsL2vpnPWBindToRgr
whether pw binded to pw group
MplsL2vpnGenYesNo
Type Values:
0no
1yes
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.37
zxr10MplsL2vpnPWFlowStatis
l2vpn pw flow statis enable or disable
MplsL2vpnGenFlagr/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.38
zxr10MplsL2vpnPWSd
l2vpn pw sd enable or disable
MplsL2vpnGenFlag
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.39
zxr10MplsL2vpnPWTtl
l2vpn pw TTL,<1-255>,default 64
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.40
zxr10MplsL2vpnPWIpv6Addr
l2vpn pw IPV6 address
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.41
zxr10MplsL2vpnPWExplicitPath
Bind PW with a pw-explicit-path
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.42
zxr10MplsL2vpnPWFec129Agi
AGI element group-id value
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.43
zxr10MplsL2vpnPWFec129SaiiGid
SAII element global-id value
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.44
zxr10MplsL2vpnPWFec129SaiiPrefix
SAII element prefix value
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.45
zxr10MplsL2vpnPWFec129SaiiACId
SAII element AC-id value
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.46
zxr10MplsL2vpnPWFec129TaiiGid
TAII element global-id value
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.47
zxr10MplsL2vpnPWFec129TaiiPrefix
TAII element prefix value
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.48
zxr10MplsL2vpnPWFec129TaiiACId
TAII element AC-id value
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.49
zxr10MplsL2vpnPWETreeRole
This configures PW ETree role, root by default.
Enumerationr/w
Enumerated Values:
1root
2leaf
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.50
zxr10MplsL2vpnPWAclIn
Bind ACL number for PW in-direction
Unsigned32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.51
zxr10MplsL2vpnPWAclOut
Bind ACL number for PW out-direction
Unsigned32r/w
Constraints:
range: 1-99
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.52
zxr10MplsL2vpnPWQosTcToCos
Bind tc to cos template
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.53
zxr10MplsL2vpnPWQosCosToTc
Bind cos to tc template
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.54
zxr10MplsL2vpnPWFlowLabelMacAlgorithm
Local flow label algorithm
MplsL2vpnAlgorithmFlagr/w
Type Values:
0unknown
1source
2destination
3sourceAndDest
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.55
zxr10MplsL2vpnPWFlowLabelIpAlgorithm
Local flow label algorithm
MplsL2vpnAlgorithmFlagr/w
Type Values:
0unknown
1source
2destination
3sourceAndDest
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.56
zxr10MplsL2vpnPWFlowLabelPortAlgorithm
Local flow label algorithm
MplsL2vpnAlgorithmFlagr/w
Type Values:
0unknown
1source
2destination
3sourceAndDest
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.57
zxr10MplsL2vpnPWFlowLabelSndEnable
Local flow label send enable
MplsL2vpnGenFlagr/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.58
zxr10MplsL2vpnPWFlowLabelRcvEnable
Local flow label receive enable
MplsL2vpnGenFlagr/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.59
zxr10MplsL2vpnPWFecType
This configures PW Fec type.
Enumerationr/w
Enumerated Values:
0unknown
1fec128
2fec129
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.60
zxr10MplsL2vpnPWOperStatus
Mpls L2vpn PW operation status
MplsL2vpnPWOperStatus
Type Values:
0notPresent
1notFinishedSignaling
2established
3establishedStandby
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.61
zxr10MplsL2vpnPWRowStatus
Row Status of the Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.104.8.1.1.1.99

zxr10MplsL2vpnPWSigTable

table
.1.3.6.1.4.1.3902.3.104.8.2.1 · 1 row entry · 24 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxr10MplsL2vpnPWSigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PWE3MGR' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PWE3MGR::zxr10MplsL2vpnPWSigTable' 
Mpls L2VPN PW signaling table
zxr10MplsL2vpnPWSigEntry row .1.3.6.1.4.1.3902.3.104.8.2.1.1
Signaling information of MPLS L2vpn PW configured on a PE
Indexes
Column Syntax OID
zxr10MplsL2vpnPWSigRemoteRouterId
Router ID of remote PE
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.1
zxr10MplsL2vpnPWSigVcId
Mpls L2vpn VCID value on a PE
Unsigned32
Constraints:
range: 1-4294967294
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.2
zxr10MplsL2vpnPWSigPwName
Name specified for each configured MPLS L2VPN PW
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.3
zxr10MplsL2vpnPWSigLocalEncapsulationType
Mpls L2vpn PW encapsulation type
MplsL2vpnPWType
Type Values:
0pwType-unknown
1pwType-FR-DLCI-Martini
2pwType-ATM-AAL5-SDU
3pwType-ATM-TRANSCELL
4pwType-ETH-VLAN
5pwType-ETH
6pwType-HDLC
7pwType-PPP
8pwType-CEP-MPLS
9pwType-ATM-NToOne-VCC
10pwType-ATM-NToOne-VPC
11pwType-IP-Layer2-Trans
12pwType-ATM-OneToOne-VCC
13pwType-ATM-OneToOne-VPC
14pwType-ATM-AAL5-PDU
15pwType-FR-Port
16pwType-CEP-Packet
17pwType-E1
18pwType-T1
19pwType-E3
20pwType-T3
21pwType-CESoPSN-Basic
22pwType-TDMoIP-AAL1
23pwType-CESoPSN-TDM
24pwType-TDMoIP-AAL2
25pwType-FR-DLCI
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.4
zxr10MplsL2vpnPWSigSignalingType
Mpls L2vpn PW signaling type
MplsL2vpnPWSignalingType
Type Values:
0unknown
1pwIdFecSignaling
2genFecSignaling
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.5
zxr10MplsL2vpnPWSigOperStatus
Mpls L2vpn PW operation status
MplsL2vpnPWOperStatus
Type Values:
0notPresent
1notFinishedSignaling
2established
3establishedStandby
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.6
zxr10MplsL2vpnPwSigCwStatus
Indicates the status of the control word (CW) negotiation
based on the local configuration and the indications received
from the peer node.
waitingForNextMsg(1) indicates that the node is waiting for
another label mappi…
MplsL2vpnPwCwStatus
Type Values:
1waitingForNextMsg
2sentWrongBitErrorCode
3rxWithdrawWithWrongBitErrorCode
4illegalReceivedBit
5cwPresent
6cwNotPresent
7notYetKnown
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.7
zxr10MplsL2vpnPWSigLocalLabel
PW internal label locally allocated.If the label is not yet known,
the object should return a value of 0xFFFFFFFF.
Unsigned32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.8
zxr10MplsL2vpnPWSigRemoteLabel
PW internal label allocated by remote peer.If the label is not yet known,
the object should return a value of 0xFFFFFFFF.
Unsigned32
Constraints:
range: 16-1048575
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.9
zxr10MplsL2vpnPWSigLocalGroupId
Used in the Group ID field sent to peer within the maintenance protocol used
for PW setup.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.10
zxr10MplsL2vpnPWSigLocalCbit
Local configuration of the control word.
MplsL2vpnPWCbit
Type Values:
0cword-DISABLE
1cword-ENABLE
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.11
zxr10MplsL2vpnPWSigLocalIfMtu
Locally supported MTU size over the interface associated with the PW
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.12
zxr10MplsL2vpnPWSigLocalIfName
Name of local interface that PW has been configured on
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.13
zxr10MplsL2vpnPWSigRemoteEncapsulationType
Remote Mpls L2vpn PW encapsulation type
MplsL2vpnPWType
Type Values:
0pwType-unknown
1pwType-FR-DLCI-Martini
2pwType-ATM-AAL5-SDU
3pwType-ATM-TRANSCELL
4pwType-ETH-VLAN
5pwType-ETH
6pwType-HDLC
7pwType-PPP
8pwType-CEP-MPLS
9pwType-ATM-NToOne-VCC
10pwType-ATM-NToOne-VPC
11pwType-IP-Layer2-Trans
12pwType-ATM-OneToOne-VCC
13pwType-ATM-OneToOne-VPC
14pwType-ATM-AAL5-PDU
15pwType-FR-Port
16pwType-CEP-Packet
17pwType-E1
18pwType-T1
19pwType-E3
20pwType-T3
21pwType-CESoPSN-Basic
22pwType-TDMoIP-AAL1
23pwType-CESoPSN-TDM
24pwType-TDMoIP-AAL2
25pwType-FR-DLCI
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.14
zxr10MplsL2vpnPWSigRemoteGroupId
Used in the Group ID field for PW setup.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.15
zxr10MplsL2vpnPWSigRemoteIfMtu
Remote supported MTU size over the interface associated with the PW
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.16
zxr10MplsL2vpnPWSigRemoteIfName
Name of Remote interface that PW has been configured on
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.17
zxr10MplsL2vpnPWSigRemotePwStatusCap
Indicates the remote node capability to advertise the
PW status notification.
notAppicable SHOULD be reported if the local node is not
capable of accepting the status notification object.
notYetKnown SHOULD be reported …
MplsL2vpnPwRemoteStatusCap
Type Values:
1notApplicable
2notYetKnown
3remoteCapable
4remoteNotCapable
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.18
zxr10MplsL2vpnPWSigLocalPwStatusCap
Indicates the remote node capability to advertise the
PW status notification.
notAppicable SHOULD be reported if the local node is not
capable of accepting the status notification object.
notYetKnown SHOULD be reported …
MplsL2vpnPwLocalStatusCap
Type Values:
1notApplicable
2notYetKnown
3remoteCapable
4remoteNotCapable
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.19
zxr10MplsL2vpnPWSigNegPwStatusCap
result of pw status enable after negotiate
MplsL2vpnPwNegStatusCap
Type Values:
0disable
1enable
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.20
zxr10MplsL2vpnPWSigLocalPwPreForwarding
Local pw priority forwarding status
MplsL2vpnPWPreForwarding
Type Values:
0pw-forward-active
1pw-forward-standby
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.21
zxr10MplsL2vpnPWSigRemotePwPreForwarding
Remote pw priority forwarding status
MplsL2vpnPWPreForwarding
Type Values:
0pw-forward-active
1pw-forward-standby
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.22
zxr10MplsL2vpnPWSigNegoPwPreForwarding
result of negotiate of pw priority forwarding status
MplsL2vpnPWPreForwarding
Type Values:
0pw-forward-active
1pw-forward-standby
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.23
zxr10MplsL2vpnPWSigMacwithdrawCal
mac withdraw times calculate
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.3.104.8.2.1.1.24

zxr10MplsL2vpnPWClassMgrTable

table
.1.3.6.1.4.1.3902.3.104.8.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxr10MplsL2vpnPWClassMgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PWE3MGR' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PWE3MGR::zxr10MplsL2vpnPWClassMgrTable' 
Mpls L2VPN PW class manage table
zxr10MplsL2vpnPWClassMgrEntry row .1.3.6.1.4.1.3902.3.104.8.3.1.1
Manage information of Mpls L2vpn PW Class configured on a PE
Indexes
Column Syntax OID
zxr10MplsL2vpnPWClassMgrName
Name specified for each configured MPLS L2VPN PW class
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.1
zxr10MplsL2vpnPWClassMgrCBit
CBit Whether Enable specified for each configured MPLS L2VPN PW class
MplsL2vpnPWCbitr/w
Type Values:
0cword-DISABLE
1cword-ENABLE
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.2
zxr10MplsL2vpnPWClassMgrCCType
CC Type specified for each configured MPLS L2VPN PW class
MplsL2vpnPWCCTyper/w
Type Values:
0ccType-unknown
1ccType-Typel
2ccType-Type2
3ccType-Type3
4ccType-Type1-Type2
5ccType-Type1-Type3
6ccType-Type2-Type3
7ccType-Type1-Type2-Type3
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.3
zxr10MplsL2vpnPWClassMgrCVType
CV Type specified for each configured MPLS L2VPN PW class
MplsL2vpnPWCVTyper/w
Type Values:
0cvType-unknown
1cvType-Lsp-Ping
2cvType-Lsp-Icmp-Ping
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.4
zxr10MplsL2vpnPWBindToPWClass
Whether PW binded to PW class
MplsL2vpnGenYesNo
Type Values:
0no
1yes
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.5
zxr10MplsL2vpnPWClassMgrRowStatus
The rowstatus of zxr10MplsL2vpnPWClassMgrTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.104.8.3.1.1.30

zxr10MplsL2vpnPWRGrMgrTable

table
.1.3.6.1.4.1.3902.3.104.8.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxr10MplsL2vpnPWRGrMgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PWE3MGR' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PWE3MGR::zxr10MplsL2vpnPWRGrMgrTable' 
Mpls L2VPN PW redundancy group manage table
zxr10MplsL2vpnPWRGrMgrEntry row .1.3.6.1.4.1.3902.3.104.8.4.1.1
Manage information of Mpls L2vpn PW redundancy group configured on a PE
Indexes
Column Syntax OID
zxr10MplsL2vpnPWRGrMgrPWRGrName
Name specified for each configured MPLS L2VPN PW redundancy group
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.1
zxr10MplsL2vpnPWRGrNegType
Negotiate type for each configured MPLS L2VPN PW redundancy group
MplsL2vpnPwRGrNegTyper/w
Type Values:
0unknown
1not-negotiation
2independent-negotiation
3master-negotiation
4slave-negotiation
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.2
zxr10MplsL2vpnPWRGrMasterPWName
Master PW name for each configured MPLS L2VPN PW redundancy group
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.3
zxr10MplsL2vpnPWRGrSlavePWName
Slave PW name for each configured MPLS L2VPN PW redundancy group
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.4
zxr10MplsL2vpnPWRGrCurrentForwardingPWName
current forwarding PW Name for each configured MPLS L2VPN PW
redundancy group
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.5
zxr10MplsL2vpnPWRGrProtectType
Protect Type for each configured MPLS L2VPN PW redundancy group
MplsL2vpnPwRGrProtectTyper/w
Type Values:
0unknown
1onePlusOne-2send1recv
2onePlusOne-2send2recv
3oneByOne
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.6
zxr10MplsL2vpnPWRGrProtectHoldOffTime
Protect hold off time for each configured MPLS L2VPN PW redundancy group
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.7
zxr10MplsL2vpnPWRGrRevertiveCap
Revertive Capability for each configured MPLS L2VPN PW redundancy group
MplsL2vpnPwRGrProtectModer/w
Type Values:
0disable
1immediate
2delay-time
3unknown
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.8
zxr10MplsL2vpnPWRGrWaitRestoreTime
Wait to restore time for each configured MPLS L2VPN PW redundancy group
Unsigned32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.9
zxr10MplsL2vpnPWRGrProtectStatus
Mpls L2vpn PW redundancy group switch status
MplsL2vpnPwRGrProtectStateType
Type Values:
0unknown
1norequestwork
2lockout
3forcedswitch
4signalfailwork
5manualswitch
6waittorestore
7exerciseworkactive
8exerciseprotectactive
9donotrevert
10signalfailprotect
11signaldegradelprotect
12signaldegradelwork
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.10
zxr10MplsL2vpnPWRGrProtectSwitch
Mpls L2vpn PW redundancy group switch type
MplsL2vpnPwRGrProtectSwitchTyper/w
Type Values:
0unknown
1clear
2lp
3fs
4ms
5exer
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.11
zxr10MplsL2vpnPWRGrRowStatus
The rowstatus of zxr10MplsL2vpnPWRGrMgrTable
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.3.104.8.4.1.1.30