Standard view Table view

PW-ATM-MIB

        This MIB contains managed object definitions for
pseudowire emulation of ATM over Packet Switched
Networks (PSNs).
        
This MIB supplements the PW-STD-MIB module.
The PW-STD-MIB contains structures and MIB associations
generic to pseudowire (PW) emulation.  PW-specific
MIBs (such as this) contain config and stats for specific
PW types.
        
Copyright (c) 2009 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the
following conditions are met:
        
- Redistributions of source code must retain the above
  copyright notice, this list of conditions and the
  following disclaimer.
        
- Redistributions in binary form must reproduce the above
  copyright notice, this list of conditions and the
  following disclaimer in the documentation and/or other
  materials provided with the distribution.
        
- Neither the name of Internet Society, IETF or IETF Trust,
  nor the names of specific contributors, may be used to
  endorse or promote products derived from this software
  without specific prior written permission.
        
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
        
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
        
This version of this MIB module is part of RFC 5605;
see the RFC itself for full legal notices.
Source file
PW-ATM-MIB
Last revised
Identity
pwAtmMIB
Base OID
1.3.6.1.2.1.183
Imported Objects
ATM-TC-MIB AtmVcIdentifier AtmVpIdentifier
IF-MIB InterfaceIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount
PW-STD-MIB pwIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC RowPointer RowStatus TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-ATM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-ATM-MIB::pwAtmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ATM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ATM-MIB::pwAtmMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (80)
pwAtmMIB
.1.3.6.1.2.1.183
pwAtmNotifications
.1.3.6.1.2.1.183.0
pwAtmObjects
.1.3.6.1.2.1.183.1
pwAtmOutboundTable
.1.3.6.1.2.1.183.1.1
pwAtmOutboundEntry
PW-STD-MIBpwIndex
 .1.3.6.1.2.1.183.1.1.1
pwAtmOutboundAtmIf r/w
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.183.1.1.1.1
pwAtmOutboundVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.1.1.2
pwAtmOutboundVci r/w
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.1.1.3
pwAtmOutboundTrafficParamDescr r/w
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.183.1.1.1.4
pwAtmOutboundRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.183.1.1.1.5
pwAtmPerf1DayIntervalTable
.1.3.6.1.2.1.183.1.10
pwAtmPerf1DayIntervalEntry
PW-STD-MIBpwIndexpwAtmPerf1DayIntervalNumber
 .1.3.6.1.2.1.183.1.10.1
pwAtmPerf1DayIntervalNumber
Unsigned32
 .1.3.6.1.2.1.183.1.10.1.1
pwAtmPerf1DayIntervalCellsReceived
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.10
pwAtmPerf1DayIntervalUnknownCells
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.11
pwAtmPerf1DayIntervalValidData
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.183.1.10.1.2
pwAtmPerf1DayIntervalDuration
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.183.1.10.1.3
pwAtmPerf1DayIntervalMissingPkts
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.4
pwAtmPerf1DayIntervalPktsReOrder
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.5
pwAtmPerf1DayIntervalPktsMisOrder
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.6
pwAtmPerf1DayIntervalPktsTimeout
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.7
pwAtmPerf1DayIntervalCellsXmit
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.8
pwAtmPerf1DayIntervalCellsDropped
SNMPv2-SMICounter32
 .1.3.6.1.2.1.183.1.10.1.9
pwAtmInboundTable
.1.3.6.1.2.1.183.1.3
pwAtmInboundEntry
PW-STD-MIBpwIndex
 .1.3.6.1.2.1.183.1.3.1
pwAtmInboundAtmIf r/w
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.183.1.3.1.1
pwAtmInboundVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.3.1.2
pwAtmInboundVci r/w
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.3.1.3
pwAtmInboundTrafficParamDescr r/w
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.183.1.3.1.4
pwAtmInboundRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.183.1.3.1.5
pwAtmCfgTable
.1.3.6.1.2.1.183.1.5
pwAtmCfgEntry
PW-STD-MIBpwIndex
 .1.3.6.1.2.1.183.1.5.1
pwAtmCfgMaxCellConcatenation r/w
Unsigned32
 .1.3.6.1.2.1.183.1.5.1.1
pwAtmCfgFarEndMaxCellConcatenation r/w
Unsigned32
 .1.3.6.1.2.1.183.1.5.1.2
pwAtmCfgTimeoutMode r/w
Enumeration
 .1.3.6.1.2.1.183.1.5.1.3
pwAtmClpQosMapping r/w
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.183.1.5.1.4
pwAtmOutboundNto1Table
.1.3.6.1.2.1.183.1.6
pwAtmOutboundNto1Entry
PW-STD-MIBpwIndexpwAtmOutboundNto1AtmIfpwAtmOutboundNto1VpipwAtmOutboundNto1Vci
 .1.3.6.1.2.1.183.1.6.1
pwAtmOutboundNto1AtmIf
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.183.1.6.1.1
pwAtmOutboundNto1Vpi
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.6.1.2
pwAtmOutboundNto1Vci
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.6.1.3
pwAtmOutboundNto1RowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.183.1.6.1.4
pwAtmOutboundNto1TrafficParamDescr r/w
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.183.1.6.1.5
pwAtmOutboundNto1MappedVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.6.1.6
pwAtmOutboundNto1MappedVci r/w
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.6.1.7
pwAtmInboundNto1Table
.1.3.6.1.2.1.183.1.7
pwAtmInboundNto1Entry
PW-STD-MIBpwIndexpwAtmInboundNto1AtmIfpwAtmInboundNto1VpipwAtmInboundNto1Vci
 .1.3.6.1.2.1.183.1.7.1
pwAtmInboundNto1AtmIf
IF-MIBInterfaceIndex
 .1.3.6.1.2.1.183.1.7.1.1
pwAtmInboundNto1Vpi
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.7.1.2
pwAtmInboundNto1Vci
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.7.1.3
pwAtmInboundNto1RowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.183.1.7.1.4
pwAtmInboundNto1TrafficParamDescr r/w
SNMPv2-TCRowPointer
 .1.3.6.1.2.1.183.1.7.1.5
pwAtmInboundNto1MappedVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.183.1.7.1.6
pwAtmInboundNto1MappedVci r/w
ATM-TC-MIBAtmVcIdentifier
 .1.3.6.1.2.1.183.1.7.1.7
pwAtmPerfCurrentTable
.1.3.6.1.2.1.183.1.8
pwAtmPerfCurrentEntry
PW-STD-MIBpwIndex
 .1.3.6.1.2.1.183.1.8.1
pwAtmPerfCurrentMissingPkts
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.1
pwAtmPerfCurrentPktsReOrder
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.2
pwAtmPerfCurrentPktsMisOrder
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.3
pwAtmPerfCurrentPktsTimeout
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.4
pwAtmPerfCurrentCellsXmit
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.5
pwAtmPerfCurrentCellsDropped
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.6
pwAtmPerfCurrentCellsReceived
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.7
pwAtmPerfCurrentUnknownCells
PerfHist-TC-MIBPerfCurrentCount
 .1.3.6.1.2.1.183.1.8.1.8
pwAtmPerfIntervalTable
.1.3.6.1.2.1.183.1.9
pwAtmPerfIntervalEntry
PW-STD-MIBpwIndexpwAtmPerfIntervalNumber
 .1.3.6.1.2.1.183.1.9.1
pwAtmPerfIntervalNumber
Unsigned32
 .1.3.6.1.2.1.183.1.9.1.1
pwAtmPerfIntervalCellsReceived
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.10
pwAtmPerfIntervalUnknownCells
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.11
pwAtmPerfIntervalValidData
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.183.1.9.1.2
pwAtmPerfIntervalDuration
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.183.1.9.1.3
pwAtmPerfIntervalMissingPkts
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.4
pwAtmPerfIntervalPktsReOrder
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.5
pwAtmPerfIntervalPktsMisOrder
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.6
pwAtmPerfIntervalPktsTimeout
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.7
pwAtmPerfIntervalCellsXmit
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.8
pwAtmPerfIntervalCellsDropped
PerfHist-TC-MIBPerfIntervalCount
 .1.3.6.1.2.1.183.1.9.1.9
pwAtmConformance
.1.3.6.1.2.1.183.2
pwAtmCompliances
.1.3.6.1.2.1.183.2.1
pwAtmGroups
.1.3.6.1.2.1.183.2.2
Dependencies (14) 7 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ATM-TC-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. PerfHist-TC-MIBrfc
  9. HC-PerfHist-TC-MIBrfc
  10. IANA-PWE3-MIBrfc
  11. INET-ADDRESS-MIBrfc
  12. PW-TC-STD-MIBrfc
  13. SNMP-FRAMEWORK-MIBrfc
  14. PW-STD-MIBrfc
  15. PW-ATM-MIBrfcselected
Conformance Groups (6)
pwAtmCfgGroup
pwAtmCfgMaxCellConcatenation pwAtmCfgFarEndMaxCellConcatenation pwAtmCfgTimeoutMode pwAtmClpQosMapping
Collection of objects for basic ATM PW
configuration.
 .1.3.6.1.2.1.183.2.2.5
pwAtmPerfGroup
pwAtmPerfCurrentMissingPkts pwAtmPerfCurrentPktsReOrder pwAtmPerfCurrentPktsMisOrder pwAtmPerfCurrentPktsTimeout pwAtmPerfCurrentCellsXmit pwAtmPerfCurrentCellsDropped pwAtmPerfCurrentCellsReceived pwAtmPerfCurrentUnknownCells pwAtmPerfIntervalValidData pwAtmPerfIntervalDuration pwAtmPerfIntervalMissingPkts pwAtmPerfIntervalPktsReOrder pwAtmPerfIntervalPktsMisOrder pwAtmPerfIntervalPktsTimeout pwAtmPerfIntervalCellsXmit pwAtmPerfIntervalCellsDropped pwAtmPerfIntervalCellsReceived pwAtmPerfIntervalUnknownCells pwAtmPerf1DayIntervalValidData pwAtmPerf1DayIntervalDuration pwAtmPerf1DayIntervalMissingPkts pwAtmPerf1DayIntervalPktsReOrder pwAtmPerf1DayIntervalPktsMisOrder pwAtmPerf1DayIntervalPktsTimeout pwAtmPerf1DayIntervalCellsXmit pwAtmPerf1DayIntervalCellsDropped pwAtmPerf1DayIntervalCellsReceived pwAtmPerf1DayIntervalUnknownCells
Collection of objects for basic ATM PW Performance.
 .1.3.6.1.2.1.183.2.2.6
pwAtmOutbound1to1Group
pwAtmOutboundAtmIf pwAtmOutboundVpi pwAtmOutboundVci pwAtmOutboundTrafficParamDescr pwAtmOutboundRowStatus
Collection of objects for basic 1:1 ATM PW outbound
configuration.
 .1.3.6.1.2.1.183.2.2.7
pwAtmInbound1to1Group
pwAtmInboundAtmIf pwAtmInboundVpi pwAtmInboundVci pwAtmInboundTrafficParamDescr pwAtmInboundRowStatus
Collection of objects for basic 1:1 ATM PW inbound
configuration.
 .1.3.6.1.2.1.183.2.2.8
pwAtmOutboundNto1Group
pwAtmOutboundNto1RowStatus pwAtmOutboundNto1TrafficParamDescr pwAtmOutboundNto1MappedVpi pwAtmOutboundNto1MappedVci
Collection of objects for N:1, 1:1, or transparent
ATM PW outbound configuration.
 .1.3.6.1.2.1.183.2.2.9
pwAtmInboundNto1Group
pwAtmInboundNto1RowStatus pwAtmInboundNto1TrafficParamDescr pwAtmInboundNto1MappedVpi pwAtmInboundNto1MappedVci
Collection of objects for N:1, 1:1, or transparent
ATM PW inbound configuration.
 .1.3.6.1.2.1.183.2.2.10
Compliance Statements (1)

OID .1.3.6.1.2.1.183.2.1.2
The compliance statement for agents that support
ATM PW.
Required groups
mandatory pwAtmCfgGroup
mandatory pwAtmPerfGroup
optional pwAtmOutbound1to1Group This group is mandatory only for implementations
that support the ATM PW 1:1 mode and not using
the Nto1 table.
optional pwAtmInbound1to1Group This group is mandatory only for implementations
that support the ATM PW 1:1 mode and not using
the Nto1 table.
optional pwAtmOutboundNto1Group This group is mandatory only for implementations
that support the ATM PW N:1 and transparent mode.
optional pwAtmInboundNto1Group This group is mandatory only for implementations
that support the ATM PW N:1 and transparent mode.
Object refinements
ObjectAccessSyntaxDescription
pwAtmCfgFarEndMaxCellConcatenation readonly
The ability to set this object
is not required.