PSAMP-MIB
The PSAMP MIB defines managed objects for packet sampling
and filtering.
These objects provide information about managed nodes
supporting packet sampling, including packet sampling
capabilities, configuration, and statistics.
The PSAMP MIB module registers additional top-level OIDs for
the parameter subtrees of its Selector functions in the
IPFIX-SELECTOR-MIB Function sub-registry according to the
procedures defined in RFC 6615.
Copyright (c) 2012 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this MIB module is part of RFC 6727; see the
RFC itself for full legal notices.
- Source file
PSAMP-MIB- Last revised
- Identity
psampMIB- Base OID
1.3.6.1.2.1.212
Imported Objects
| APPLICATION-MIB | Unsigned64TC |
| FLOAT-TC-MIB | Float64TC |
| IPFIX-SELECTOR-MIB | ipfixSelectorFunctions |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PSAMP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PSAMP-MIB::psampMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PSAMP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PSAMP-MIB::psampMIB'
Objects (48)
Showing 48 of 48 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.194.1.1.2 |
||
.1.3.6.1.2.1.194.1.1.2.1 |
||
.1.3.6.1.2.1.194.1.1.2.2 |
||
.1.3.6.1.2.1.194.1.1.2.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.194.1.1.2.2.1.1 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.2.2.1.2 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.2.2.1.3 |
|
.1.3.6.1.2.1.194.1.1.3 |
||
.1.3.6.1.2.1.194.1.1.3.1 |
||
.1.3.6.1.2.1.194.1.1.3.2 |
||
.1.3.6.1.2.1.194.1.1.3.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.194.1.1.3.2.1.1 |
|
|
microsecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.3.2.1.2 |
|
|
microsecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.3.2.1.3 |
|
.1.3.6.1.2.1.194.1.1.4 |
||
.1.3.6.1.2.1.194.1.1.4.1 |
||
.1.3.6.1.2.1.194.1.1.4.2 |
||
.1.3.6.1.2.1.194.1.1.4.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.194.1.1.4.2.1.1 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.4.2.1.2 |
|
|
packetsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.194.1.1.4.2.1.3 |
|
.1.3.6.1.2.1.194.1.1.5 |
||
.1.3.6.1.2.1.194.1.1.5.1 |
||
.1.3.6.1.2.1.194.1.1.5.2 |
||
.1.3.6.1.2.1.194.1.1.5.2.1 |
||
|
Integer32
|
.1.3.6.1.2.1.194.1.1.5.2.1.1 |
|
.1.3.6.1.2.1.194.1.1.5.2.1.2 |
||
.1.3.6.1.2.1.194.1.1.6 |
||
.1.3.6.1.2.1.194.1.1.6.1 |
||
.1.3.6.1.2.1.194.1.1.7 |
||
.1.3.6.1.2.1.194.1.1.7.1 |
||
.1.3.6.1.2.1.194.1.1.7.2 |
||
.1.3.6.1.2.1.194.1.1.7.3 |
||
.1.3.6.1.2.1.194.1.1.7.3.1 |
||
|
Integer32
|
.1.3.6.1.2.1.194.1.1.7.3.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.194.1.1.7.3.1.2 |
|
.1.3.6.1.2.1.194.1.1.7.3.1.3 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.4 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.5 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.6 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.7 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.8 |
||
.1.3.6.1.2.1.194.1.1.7.3.1.9 |
||
.1.3.6.1.2.1.212 |
||
.1.3.6.1.2.1.212.1 |
||
.1.3.6.1.2.1.212.2 |
||
.1.3.6.1.2.1.212.2.1 |
||
.1.3.6.1.2.1.212.2.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- SYSAPPL-MIBrfc
- APPLICATION-MIBrfc
- FLOAT-TC-MIBrfc
- IPFIX-SELECTOR-MIBrfc
- PSAMP-MIBrfcselected
Conformance Groups (6)
|
These objects are needed if count based sampling is
implemented. |
.1.3.6.1.2.1.212.2.2.1
|
|
|
These objects are needed if time based sampling is
implemented. |
.1.3.6.1.2.1.212.2.2.2
|
|
|
These objects are needed if random n-out-of-N sampling is
implemented. |
.1.3.6.1.2.1.212.2.2.3
|
|
|
These objects are needed if uniform probabilistic sampling
is implemented. |
.1.3.6.1.2.1.212.2.2.4
|
|
|
These objects are needed if property match filtering is
implemented. |
.1.3.6.1.2.1.212.2.2.5
|
|
|
psampFiltHashAvail psampFiltHashFunction psampFiltHashInitializerValue psampFiltHashIpPayloadOffset psampFiltHashIpPayloadSize psampFiltHashSelectedRangeMin psampFiltHashSelectedRangeMax psampFiltHashOutputRangeMin psampFiltHashOutputRangeMax
These objects are needed if hash filtering is implemented.
|
.1.3.6.1.2.1.212.2.2.6
|
Compliance Statements (1)
OID
.1.3.6.1.2.1.212.2.1.1The implementation of all objects is optional and depends
on the implementation of the corresponding functionality in
the equipment.
on the implementation of the corresponding functionality in
the equipment.
Required groups
| optional | psampGroupSampCountBased |
These objects must be implemented if systematic count-based sampling is implemented in the equipment. |
| optional | psampGroupSampTimeBased |
These objects must be implemented if systematic time-based sampling is implemented in the equipment. |
| optional | psampGroupSampRandOutOfN |
These objects must be implemented if random n-out-of-N sampling is implemented in the equipment. |
| optional | psampGroupSampUniProb |
These objects must be implemented if uniform probabilistic sampling is implemented in the equipment. |
| optional | psampGroupFiltPropMatch |
These objects must be implemented if the property match filtering is implemented in the equipment. |
| optional | psampGroupFiltHash |
These objects must be implemented if hash filtering is implemented in the equipment. |