PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

mspTable

table

.1.3.6.1.4.1.1038.130.10.2 · 1 row entry · 19 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk mspTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::mspTable'

List of multiplex section protection in equipment.

mspEntry row .1.3.6.1.4.1.1038.130.10.2.1

A particular multiplex section protection of the equipment.
Each entry is created in using the msTTPTable of the Sdh-Ets MIB.

Indexes

mspIndex

Column Syntax OID

mspIndex

A unique value which identify a particular multiplex section protection.
This index is equal to an msTTPIndex(=spiIndex) which gives the interface involved .
The value of index is a constant assigned to an entry at
equ…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.10.2.1.1

mspWorkingPointer

A reference to the object which sends the data flow to this
function on working synchronous port interface side.
In most equipments, this value cannot be changed and points to
the working MST it is hard wired with.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.10.2.1.2

mspProtectionPointer

A reference to the object which sends the data flow to this
function on protection synchronous port interface side.
In most equipments, this value cannot be changed and points to
the protection MST it is hard wired with…

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.10.2.1.3

mspType

Indication of the protection type.

MspTyper/w

Type Values:

0	unknown
1	onePlusOneOptimized
2	onePlusOneCompatible
3	oneForN

.1.3.6.1.4.1.1038.130.10.2.1.4

mspDir

Indication of the direction.

MspDirectionr/w

Type Values:

0	unknown
1	unidirectionnal
2	bidirectionnal

.1.3.6.1.4.1.1038.130.10.2.1.5

mspTraffic

The value of this field indicates the protection switch position.

TrafficStatus

Type Values:

0	none
1	working
2	protection

.1.3.6.1.4.1.1038.130.10.2.1.6

mspRevertive

If the value is true the msp function is allowed to spontaneously
switch back to working chanel when it is available.
If not, the msp can switch back to working chanel only if
protection chanel fails.

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.10.2.1.7

mspWtr

The time (in seconds) the msp function waits before
considering a chanel as good after a fail.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.10.2.1.8

mspSfSdPriority

Signal Fail and Signal Degrade can be treated according to two set
of priority. The equipement will send SF and SD events according to
the value of this field.

MspPriorityr/w

Type Values:

0	unknown
1	highG783
2	low

.1.3.6.1.4.1.1038.130.10.2.1.9

mspSfSdHoldOffTime

The period (in tenth of seconds) during which a
sf or a Signal Degrade is
ignored by the MSP switch.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.10.2.1.10

mspCommand

Manual or forced commands can be apply to the protection switch.
The forced and manual switch can be refused or cleared by equipment
if a higher priority APS command is received or if the protection chanel
is down.
When…

MspCommandr/w

Type Values:

0	clear
1	lw
2	lp
3	fsW
4	fsP
5	msW
6	msP
7	exer

.1.3.6.1.4.1.1038.130.10.2.1.11

mspInitiator

Indicates the initiator equipment.

MspInitiator

Type Values:

0	unknown
1	local
2	remote

.1.3.6.1.4.1.1038.130.10.2.1.12

mspStatus

Indicates the initiator equipment status :
lockoutProtection(15),
forcedSwitch(14),
highSF(13),
lowSF(12),
highSD(11),
lowSD(10),
manualSwitch(8),
waitToRestore(6),
exercise(4),
reverseRequest(2),
doNotRevert(1),
noRequ…

MspStatus

Type Values:

0	noRequest
1	doNotRevert
2	reverseRequest
4	exercise
6	waitToRestore
8	manualSwitch
10	lowSD
11	highSD
12	lowSF
13	highSF
14	forcedSwitch
15	lockoutProtection

.1.3.6.1.4.1.1038.130.10.2.1.13

mspMonitor

When the value of this field is set to false, the failure detection
is stopped for this multiplex section protection.

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.10.2.1.14

mspFailure

Active failures on multiplex section protection.

MspFailure

Type Values:

0	none
1	pam
2	scm
4	otm
6	scmOtm

.1.3.6.1.4.1.1038.130.10.2.1.15

mspSeverity

A reference to failure severity for multiplex section protection.

EQUIPMENT-MIBSeverity

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.10.2.1.16

mspPam

Severity associed with Protection Architecture Mismatch failure
for multiplex section protection.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.10.2.1.20

mspScm

Severity associed with Selector Control Mismatch failure
for multiplex section protection.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.10.2.1.21

mspOtm

Severity associed with Operation Type Mismatch failure
for multiplex section protection.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.10.2.1.22

msSPRingTable

table

.1.3.6.1.4.1.1038.130.20.6 · 1 row entry · 26 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk msSPRingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::msSPRingTable'

List of multiplex section protection in equipment.

msSPRingEntry row .1.3.6.1.4.1.1038.130.20.6.1

A particular multiplex section protection of the equipment.
Each entry is created in using the msTTPTable of the Sdh-Ets MIB.
spiIndex gives the interface involved (line east or west)

Indexes

msSPRingIndex

Column Syntax OID

msSPRingIndex

A unique value which identify a particular SPRing = West STM index.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.1

msSPRingWestPointer

A reference to the object which sends the data flow to this
function on synchronous port interface side.
In most equipments, this value cannot be changed and points to
the West MST it is hard wired with.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.2

msSPRingEastPointer

A reference to the object which sends the data flow to this
function on synchronous port interface side.
In most equipments, this value cannot be changed and points to
the East MST it is hard wired with.
When this vari…

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.3

msSPRingWtr

The time (in seconds) the spring function waits before
considering a chanel as good after a fail.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.5

msSPRingSfSdHoldOffTime

The period (in tenth of seconds) during which a
sf or a Signal Degrade is ignored by the SPRing switch.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.6

msSPRingCommandSide

Side of the command

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.7

msSPRingCommand

Manual or forced commands can be apply to the protection switch.

MsSPRingCommandr/w

Type Values:

3	exerR
6	msR
13	fsR
15	lpS
16	clear
19	off
20	on

.1.3.6.1.4.1.1038.130.20.6.1.8

msSPRingInitiator1

A reference(ID) to the equipment that initiate the SWITCH; this is mainly the Master
when the equipment is in SWITCH state; in some case like bidirectional SF both equipment
of the couple equipment are Master.
In PASS…

MsSPRingID

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.6.1.10

msSPRingInitiator2

A reference(ID) to the equipment that respond to the SWITCH; this is mainly the Slave
when the equipment is in SWITCH state; in some case like bidirectional SF both equipment
of the couple equipment are Master.
In PAS…

MsSPRingID

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.6.1.11

msSPRingMonitor

When the value of this field is set to false, the failure detection
is stopped for this multiplex section protection.

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.20.6.1.12

msSPRingFailure

Active failures on multiplex section protection

MsSPRingFailure

Type Values:

0	none
1	ato
2	arv
3	aun
4	ptm
5	mms
6	exr

.1.3.6.1.4.1.1038.130.20.6.1.13

msSPRingSeverity

A reference to failure severity for multiplex section protection.

EQUIPMENT-MIBSeverity

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.14

msSPRingAto

Severity associed with APS Time Out failure failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.21

msSPRingArv

Severity associed with APS Rules Violation failure failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.22

msSPRingAun

Severity associed with APS Unknown Node failure failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.23

msSPRingPtm

Severity associed with Potential Traffic Misconnection failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.24

msSPRingMms

Severity associed with Mutiple Multiplex Section Fail failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.25

msSPRingExr

Severity associed with EXeRcise failure
for MS-SPRing.

EQUIPMENT-MIBSeverityr/w

Type Values:

1	nonAlarmed
2	minor
3	major
4	critical
5	warning
6	invNonAlarmed
7	invMinor
8	invMajor
9	invCritical
10	invWarning

.1.3.6.1.4.1.1038.130.20.6.1.26

msSPRingSimpleFailure

Indicate if simple or multi ring failure must be considerated

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.20.6.1.27

msSPRingId

Ring Identifier of the equipement

MsSPRingIDr/w

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.6.1.28

msSPRingNodeState

State

Type Values:

0	off
1	idle
2	pass
3	switch
4	unknown

.1.3.6.1.4.1.1038.130.20.6.1.29

msSPRingSwitchingSide

Switching SideSide

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.6.1.30

msSPRingWestTraffic

The value of this field indicates the protection switch position.

TrafficStatus

Type Values:

0	none
1	working
2	protection

.1.3.6.1.4.1.1038.130.20.6.1.31

msSPRingEastTraffic

The value of this field indicates the protection switch position.

TrafficStatus

Type Values:

0	none
1	working
2	protection

.1.3.6.1.4.1.1038.130.20.6.1.32

msSPRingWestStatus

Indicates the local status:
OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8),
manualSwitch-R(6),
waitToRestore(5),exer-R(3),noRequest(0)

MsSPRingStatus

Type Values:

0	noRequest
1	reverseRequestR
3	exerR
5	waitToRestore
6	manualSwitchR
8	sdR
11	sfR
13	forcedSwitchR
15	lockoutProtection
19	off

.1.3.6.1.4.1.1038.130.20.6.1.33

msSPRingEastStatus

Indicates the local status:
OFF (19), lockoutProtection (16), forcedSwitch-R(13),sf-R(11),sd-R(8),
manualSwitch-R(6),
waitToRestore(5),exer-R(3),noRequest(0)

MsSPRingStatus

Type Values:

0	noRequest
1	reverseRequestR
3	exerR
5	waitToRestore
6	manualSwitchR
8	sdR
11	sfR
13	forcedSwitchR
15	lockoutProtection
19	off

.1.3.6.1.4.1.1038.130.20.6.1.34

msSPRingTopoMapTable

table

.1.3.6.1.4.1.1038.130.20.11 · 1 row entry · 2 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk msSPRingTopoMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::msSPRingTopoMapTable'

Topology Map of the ring = West STM index + Val (1<=Val<=16).

msSPRingTopoMapEntry row .1.3.6.1.4.1.1038.130.20.11.1

A particular entry of the ring topology map.

Indexes

msSPRingTopoMapIndex

Column Syntax OID

msSPRingTopoMapIndex

index

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.11.1.1

msSPRingTopoMapID

identifier of the node

MsSPRingIDr/w

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.11.1.2

msSPRingMisconMapTable

table

.1.3.6.1.4.1.1038.130.20.21 · 1 row entry · 7 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk msSPRingMisconMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::msSPRingMisconMapTable'

Connectivity (misconnection) Map of the ring.

msSPRingMisconMapEntry row .1.3.6.1.4.1.1038.130.20.21.1

A particular entry of the ring connectivity (misconnection) map.
All entries are created after setting the msSPRingWestPointer.

Indexes

msSPRingMisconMapIndex

Column Syntax OID

msSPRingMisconMapIndex

Index = West STM index + Val (1<=Val<=16)
ADR2500c : val = 1 to 8 for West and 9 to 16 for East

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.21.1.1

msSPRingMisconMapSide

Side (WestPointer/msSPRingEast) of the interface that supports the AU4

MsSPRingSide

Type Values:

0	west
1	east
2	unknown

.1.3.6.1.4.1.1038.130.20.21.1.2

msSPRingMisconMapIn

Node of the ring where the Au4 traffic enters the ring

MsSPRingIDr/w

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.21.1.3

msSPRingMisconMapOut

Node of the ring where the Au4 traffic exits the ring

MsSPRingIDr/w

Type Values:

0	node0
1	node1
2	node2
3	node3
4	node4
5	node5
6	node6
7	node7
8	node8
9	node9
10	node10
11	node11
12	node12
13	node13
14	node14
15	node15
255	nodeUNK

.1.3.6.1.4.1.1038.130.20.21.1.4

msSPRingMisconMapTimeSlot

Time Slot assignment for the AU4

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.21.1.5

msSPRingMisconMapType

If the value is equal to terminated, the traffic in the ring is inserted
or extracted at this node.
If the value is equal to passedThrough the traffic only cross the node

MisconMapTyper/w

Type Values:

1	terminated
2	passedThrough

.1.3.6.1.4.1.1038.130.20.21.1.6

msSPRingMisconMapLOAccess

True if the AU4 is accessed at LO layers somewhere in the ring

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.20.21.1.7

msSPRingNUTTable

table

.1.3.6.1.4.1.1038.130.20.31 · 1 row entry · 2 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk msSPRingNUTTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::msSPRingNUTTable'

Topology Map of the ring.

msSPRingNUTEntry row .1.3.6.1.4.1.1038.130.20.31.1

A particular entry of the ring topology map.

Indexes

msSPRingNUTIndex

Column Syntax OID

msSPRingNUTIndex

AU4 index = West STM index + Val (Val = working timeSlot; 1<=Val<=8)

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.20.31.1.1

msSPRingNUTisNut

Define if the traffic is used for NUT Traffic

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.20.31.1.2

sncTable

table

.1.3.6.1.4.1.1038.130.30.2 · 1 row entry · 13 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk sncTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::sncTable'

List of snc protection in equipment.

sncEntry row .1.3.6.1.4.1.1038.130.30.2.1

A particular SNC protection which is created in using the linkTable of the Xconnection MIB.

Indexes

sncIndex

Column Syntax OID

sncIndex

sncIndex = 1000*sncType + sncTTPSink = linkIndex

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.1

sncCTPSink

The value of this field is the index of the Output Connection to which
an snc function is applied.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.2

sncLinkType

Trail level of the connection

LinkType

Type Values:

0	unknown
1	au
2	au4c
3	au16c
10	tu3
20	tu12

.1.3.6.1.4.1.1038.130.30.2.1.3

sncCTPSourceW

The value of this field indicates the Working Input Connection Point which
composes the protection link of the Output Connection Point (sncIndex).

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.4

sncCTPSourceP

The value of this field indicates the Protected Input Connection Point which
composes the protection link of the Output Connection Point (sncIndex).
When this variable is setting, the protection is created and activat…

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.5

sncTrafficStatus

This field indicates the Protection unit switch position.

TrafficStatus

Type Values:

0	none
1	working
2	protection

.1.3.6.1.4.1.1038.130.30.2.1.6

sncWorkingTriggerType

The value of this field is the criterion to trigger a switch for the Working Input
Connection Point.SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC12/VC3 ,
AU-AIS/AU-LOP for VC4 and , by extension, ppiLOS…

TriggerCriterionr/w

Type Values:

0	none
1	sncI
2	sncN
3	sncIRdi
4	sncNRdi

.1.3.6.1.4.1.1038.130.30.2.1.8

sncProtectionTriggerType

The value of this field is the criterion to trigger a switch for the Protection Input
Connection Point. SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC12/VC3 ,
AU-AIS/AU-LOP for VC4 and , by extension, pp…

TriggerCriterionr/w

Type Values:

0	none
1	sncI
2	sncN
3	sncIRdi
4	sncNRdi

.1.3.6.1.4.1.1038.130.30.2.1.9

sncRevertive

If the value is true the Protection unit function is allowed
to spontaneously switch back to working chanel when it is available.
If not, the snc can switch back to working chanel only if
protection chanel fails.

EQUIPMENT-MIBSagemBooleanr/w

Type Values:

1	true
2	false

.1.3.6.1.4.1.1038.130.30.2.1.20

sncWtr

The time (in seconds) the Protection unit function waits before
considering a chanel as good after a fail.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.21

sncStateProcess

The value of this field indicates the state of the snc protection process.

SNCStateProcess

Type Values:

0	nrnormal
1	nrsecours
2	wtr
3	dontRev
4	mssecours
5	msnormal
6	sdnormal
7	sdsecours
8	sfnormal
9	fssecours
10	sfsecours
11	fsnormal
12	lockout

.1.3.6.1.4.1.1038.130.30.2.1.22

sncHoldOffTime

The time in tenth of seconds during which a protection trigger criterion is
ignored.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.30.2.1.23

sncCommand

Manual or forced commands can be apply to the protection unit.
The forced and manual switch can be refused or cleared by equipment
if a higher priority evenement is received or if the protection chanel
is down.

SNCCommandr/w

Type Values:

0	clear
1	manualWorking
2	manualProtection
3	forcedWorking
4	forcedProtection
5	lockout
19	off
20	on

.1.3.6.1.4.1.1038.130.30.2.1.24

cardpTable

table

.1.3.6.1.4.1.1038.130.40.2 · 1 row entry · 6 columns

Open in standard view

Uses the sagemcom variant from /opt/observium/mibs/sagemcom.

Command help

Walk cardpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PROTECTION-MIB' -M '/opt/observium/mibs/sagemcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PROTECTION-MIB::cardpTable'

List of card protections in equipment.

cardpEntry row .1.3.6.1.4.1.1038.130.40.2.1

A particular card protection which is created in using the boardTable of the Shelf MIB.

Indexes

cardpIndex

Column Syntax OID

cardpIndex

cardpIndex = boardIndex in the Shelf Mib.
This index points to the working board.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.40.2.1.1

cardpBoardFamily

This field indicates the family of board concerned by the protection.

CardpFamily

Type Values:

0	none
1	switch

.1.3.6.1.4.1.1038.130.40.2.1.2

cardpReliefIndex

A reference to the relief card. It must be an existing index in the boardTable of Shelf Mib.
The relief card and the protected Card must below to the same familly.
When this variable is setting, the protection is creat…

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.1038.130.40.2.1.3

cardpTrafficStatus

Indication of the protection switch position.

TrafficStatus

Type Values:

0	none
1	working
2	protection

.1.3.6.1.4.1.1038.130.40.2.1.4

cardpCommand

Manual commands can be apply to the protection unit.
The manual switch can be refused or cleared by equipment
if a higher priority evenement is received or if the protection chanel
is down.

CardpCommandr/w

Type Values:

0	clear
1	manualSwitch

.1.3.6.1.4.1.1038.130.40.2.1.5

cardpStatus

Indication of the current protection status

CardpStatus

Type Values:

0	notSwitched
1	manualSwitch
2	automaticSwitch

.1.3.6.1.4.1.1038.130.40.2.1.6