PRIVATETECH-GEL2ESW26K-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
35
Rows
35
Columns
336

gel2esw26kSystemTimeNTPTable

table
.1.3.6.1.4.1.5205.2.54.1.2.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kSystemTimeNTPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kSystemTimeNTPTable'
gel2esw26kSystemTimeNTPEntry row .1.3.6.1.4.1.5205.2.54.1.2.2.1.1
Indexes
Column Syntax OID
gel2esw26kSystemTimeNTPIndex
The index of the ntp entry.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.1.2.2.1.1.1
gel2esw26kSystemTimeNTPServerIPType
Default: 0,
0 : IPv4,
1 : IPv6.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.1.2.2.1.1.2
gel2esw26kSystemTimeNTPServer
Get/Set the NTP Time Server1. You can use the IP address or domain name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.2.2.1.1.3
gel2esw26kSystemTimeNTPCurrentMode
0: Empty
1: Active
2: Edit
3: Delete
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.5205.2.54.1.2.2.1.1.4

gel2esw26kSystemAccountUsersTable

table
.1.3.6.1.4.1.5205.2.54.1.3.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kSystemAccountUsersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kSystemAccountUsersTable'
gel2esw26kSystemAccountUsersEntry row .1.3.6.1.4.1.5205.2.54.1.3.1.2.1
Indexes
Column Syntax OID
gel2esw26kUserIndex
 Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.5205.2.54.1.3.1.2.1.1
gel2esw26kUserName
 OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.1.3.1.2.1.2
gel2esw26kPassword
 OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.1.3.1.2.1.3
gel2esw26kUserPrivilegeLevel
default:1
User privilege level range : 1 - 15
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.5205.2.54.1.3.1.2.1.4
gel2esw26kAccountUserRowStatus
1: active
2: notInservice
3: edit
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.1.3.1.2.1.5

gel2esw26kSyslogDetailedInfoTable

table
.1.3.6.1.4.1.5205.2.54.1.5.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kSyslogDetailedInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kSyslogDetailedInfoTable'
gel2esw26kSyslogDetailedInfoEntry row .1.3.6.1.4.1.5205.2.54.1.5.2.2.1
Indexes
Column Syntax OID
gel2esw26kSyslogDetailedInfoIndex
 Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.5205.2.54.1.5.2.2.1.1
gel2esw26kSyslogDetailedInfoLevel
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.5.2.2.1.2
gel2esw26kSyslogDetailedInfoTime
 OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.5205.2.54.1.5.2.2.1.3
gel2esw26kSyslogDetailedInfoMessage
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.5.2.2.1.4

gel2esw26kTrapHostConfTable

table
.1.3.6.1.4.1.5205.2.54.1.6.1.4 · 1 row entry · 13 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kTrapHostConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kTrapHostConfTable' 
A list of trap host entry. The numbers of entries are given by the value of gel2esw26kTrapHostConfNumber.
gel2esw26kTrapHostConfEntry row .1.3.6.1.4.1.5205.2.54.1.6.1.4.1
This is the entry information for trap host.
Indexes
Column Syntax OID
gel2esw26kTrapHostConfIndex
The index of the trap host entry.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.1
gel2esw26kTrapHostConfVersion
The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)
Integer32r/w
Constraints:
range: 2-3
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.2
gel2esw26kTrapHostConfIPType
Server IP Type. Default: 4,
4 : IPv4,
6 : IPv6.
Integer32r/w
Constraints:
range: 4-4
range: 6-6
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.3
gel2esw26kTrapHostConfIP
This is the IP of the trap host.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.4
gel2esw26kTrapHostConfPort
This is the receiving-port number of the trap host.
range : 1 - 65535.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.5
gel2esw26kTrapHostConfCommunity
The community/security name for the trap PDU.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.6
gel2esw26kTrapHostConfSeverityLevel
The Severity Level.
0 : Emerg, 1 : Alert, 2 : Crit, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.7
gel2esw26kTrapHostConfSecurityLevel
The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv.
1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv.
Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv).
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.8
gel2esw26kTrapHostConfAuthPtc
Authentication Protocol, there are SHA and MD5 supported presently.
1 : MD5, 2 : SHA.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.9
gel2esw26kTrapHostConfAuthPassword
Authentication Password, is used for authenticating. The return value is always '********'.
If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters.
If the authentication protocol is SH…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.10
gel2esw26kTrapHostConfPrivPtc
This is the Privacy Protocol, which is used in AuthPriv. Only supports DES.
An empty string will be returned if the security level is not 3(AuthPriv).
1 : DES.
Integer32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.11
gel2esw26kTrapHostConfPrivPassword
The password is Privacy Key. The return value is always '********'. This Key
must be more than 8 characters, and less than 32 characters.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.12
gel2esw26kTrapHostConfCurrentMode
0:Empty, 1:Active mode, 2:Edit mode, 3:Delete.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.1.6.1.4.1.13

gel2esw26kPortConfigurationTable

table
.1.3.6.1.4.1.5205.2.54.2.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortConfigurationTable' 
Show port configurations.
gel2esw26kPortConfigurationEntry row .1.3.6.1.4.1.5205.2.54.2.1.1.1
Indexes
Column Syntax OID
gel2esw26kPortConfPort
port, range : 1 - port number.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.1
gel2esw26kPortConfPortMedia
Show port media.
OctetString
Constraints:
range: 1-4
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.2
gel2esw26kPortConfLink
The current link state.
OctetString
Constraints:
range: 2-4
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.3
gel2esw26kPortConfCurrentSpeed
The current link speed of the port.
OctetString
Constraints:
range: 6-12
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.4
gel2esw26kPortConfSpeed
default: 1,
0: disable state,
1: auto,
2: 10 Half,
3: 10 Full,
4: 100 Half,
5: 100 Full,
6: 1G full,
only 'Dual Media' port have 7-11 option.
Dual Media port default: 7,
7: SFP_Auto_AMS,
8: 100FX_AMS,
9: 100…
Integer32r/w
Constraints:
range: 0-11
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.5
gel2esw26kPortConfCurrentFlowControlRx
0: disable
1: enable
2: not support.
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.6
gel2esw26kPortConfCurrentFlowControlTx
0: disable
1: enable
2: not support.
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.7
gel2esw26kPortConfFlowControl
default: 0,
0: disable
1: enable
2: not support.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.8
gel2esw26kPortConfMaxFrameSize
default: 9600 , range : 1518 - 9600
Integer32r/w
Constraints:
range: 1518-9600
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.9
gel2esw26kPortConfExcessiveCollisionMode
default: 0,
Excessive Collision Mode :
0: Discard,
1: Restart,
2: not support.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.10
gel2esw26kPortConfPowerControl
default: 0,
PowerControl :
0: disable,
1: Actiphy,
2: Dynamic (perfectReach),
3: Enable,
4: not support.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.11
gel2esw26kPortConfDescription
Interface specific description.
Up to 47 characters describing this interface.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.1.1.12

gel2esw26kPortTrafficStatisticsTable

table
.1.3.6.1.4.1.5205.2.54.2.1.2 · 1 row entry · 53 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortTrafficStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortTrafficStatisticsTable'
gel2esw26kPortTrafficStatisticsEntry row .1.3.6.1.4.1.5205.2.54.2.1.2.1
Indexes
Column Syntax OID
gel2esw26kPortTrafficStatisticsPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.1
gel2esw26kPortTrafficStatisticsClear
 Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.2
gel2esw26kPortTrafficRxPackets
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.3
gel2esw26kPortTrafficRxOctets
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.4
gel2esw26kPortTrafficRxUnicast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.5
gel2esw26kPortTrafficRxMulticast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.6
gel2esw26kPortTrafficRxBroadcast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.7
gel2esw26kPortTrafficRxPause
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.8
gel2esw26kPortTrafficRx64Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.9
gel2esw26kPortTrafficRx65to127Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.10
gel2esw26kPortTrafficRx128to255Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.11
gel2esw26kPortTrafficRx256to511Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.12
gel2esw26kPortTrafficRx512to1023Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.13
gel2esw26kPortTrafficRx1024to1526Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.14
gel2esw26kPortTrafficRxExceecd1527Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.15
gel2esw26kPortTrafficRxQ0
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.16
gel2esw26kPortTrafficRxQ1
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.17
gel2esw26kPortTrafficRxQ2
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.18
gel2esw26kPortTrafficRxQ3
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.19
gel2esw26kPortTrafficRxQ4
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.20
gel2esw26kPortTrafficRxQ5
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.21
gel2esw26kPortTrafficRxQ6
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.22
gel2esw26kPortTrafficRxQ7
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.23
gel2esw26kPortTrafficRxDrops
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.24
gel2esw26kPortTrafficRxCRCorAlignment
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.25
gel2esw26kPortTrafficRxUndersize
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.26
gel2esw26kPortTrafficRxOversize
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.27
gel2esw26kPortTrafficRxFragments
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.28
gel2esw26kPortTrafficRxJabber
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.29
gel2esw26kPortTrafficRxFiltered
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.30
gel2esw26kPortTrafficTxPackets
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.31
gel2esw26kPortTrafficTxOctets
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.32
gel2esw26kPortTrafficTxUnicast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.33
gel2esw26kPortTrafficTxMulticast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.34
gel2esw26kPortTrafficTxBroadcast
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.35
gel2esw26kPortTrafficTxPause
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.36
gel2esw26kPortTrafficTx64Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.37
gel2esw26kPortTrafficTx65to127Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.38
gel2esw26kPortTrafficTx128to255Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.39
gel2esw26kPortTrafficTx256to511Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.40
gel2esw26kPortTrafficTx512to1023Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.41
gel2esw26kPortTrafficTx1024to1526Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.42
gel2esw26kPortTrafficTxExceecd1527Bytes
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.43
gel2esw26kPortTrafficTxQ0
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.44
gel2esw26kPortTrafficTxQ1
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.45
gel2esw26kPortTrafficTxQ2
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.46
gel2esw26kPortTrafficTxQ3
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.47
gel2esw26kPortTrafficTxQ4
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.48
gel2esw26kPortTrafficTxQ5
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.49
gel2esw26kPortTrafficTxQ6
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.50
gel2esw26kPortTrafficTxQ7
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.51
gel2esw26kPortTrafficTxDrops
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.52
gel2esw26kPortTrafficTxLateOrExcColl
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.2.1.53

gel2esw26kPortQoSStatisticsTable

table
.1.3.6.1.4.1.5205.2.54.2.1.3.2 · 1 row entry · 17 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortQoSStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortQoSStatisticsTable'
gel2esw26kPortQoSStatisticsEntry row .1.3.6.1.4.1.5205.2.54.2.1.3.2.1
Indexes
Column Syntax OID
gel2esw26kPortQoSStatisticsPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.1
gel2esw26kPortQoSQ0Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.2
gel2esw26kPortQoSQ0Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.3
gel2esw26kPortQoSQ1Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.4
gel2esw26kPortQoSQ1Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.5
gel2esw26kPortQoSQ2Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.6
gel2esw26kPortQoSQ2Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.7
gel2esw26kPortQoSQ3Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.8
gel2esw26kPortQoSQ3Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.9
gel2esw26kPortQoSQ4Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.10
gel2esw26kPortQoSQ4Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.11
gel2esw26kPortQoSQ5Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.12
gel2esw26kPortQoSQ5Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.13
gel2esw26kPortQoSQ6Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.14
gel2esw26kPortQoSQ6Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.15
gel2esw26kPortQoSQ7Rx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.16
gel2esw26kPortQoSQ7Tx
 SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.5205.2.54.2.1.3.2.1.17

gel2esw26kSFPInfoTable

table
.1.3.6.1.4.1.5205.2.54.2.1.4 · 1 row entry · 17 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kSFPInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kSFPInfoTable'
gel2esw26kSFPInfoEntry row .1.3.6.1.4.1.5205.2.54.2.1.4.1
Indexes
Column Syntax OID
gel2esw26kSFPInfoIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.1
gel2esw26kSFPInfoPort
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.2
gel2esw26kSFPConnectorType
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.3
gel2esw26kSFPFiberType
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.4
gel2esw26kSFPTxCentralWavelength
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.5
gel2esw26kSFPBaudRate
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.6
gel2esw26kSFPVendorOUI
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.7
gel2esw26kSFPVendorName
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.8
gel2esw26kSFPVendorPN
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.9
gel2esw26kSFPVendorRev
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.10
gel2esw26kSFPVendorSN
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.11
gel2esw26kSFPDateCode
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.12
gel2esw26kSFPTemperature
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.13
gel2esw26kSFPVcc
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.14
gel2esw26kSFPMon1Bias
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.15
gel2esw26kSFPMon2TxPWR
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.16
gel2esw26kSFPMon3RxPWR
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.1.4.1.17

gel2esw26kPortEEETable

table
.1.3.6.1.4.1.5205.2.54.2.1.5 · 1 row entry · 10 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortEEETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortEEETable'
gel2esw26kPortEEEEntry row .1.3.6.1.4.1.5205.2.54.2.1.5.1
Indexes
Column Syntax OID
gel2esw26kPortEEEPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.1
gel2esw26kPortEEEMode
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.2
gel2esw26kPortEEEUrgentQueue1
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.3
gel2esw26kPortEEEUrgentQueue2
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.4
gel2esw26kPortEEEUrgentQueue3
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.5
gel2esw26kPortEEEUrgentQueue4
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.6
gel2esw26kPortEEEUrgentQueue5
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.7
gel2esw26kPortEEEUrgentQueue6
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.8
gel2esw26kPortEEEUrgentQueue7
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.9
gel2esw26kPortEEEUrgentQueue8
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.1.5.1.10

gel2esw26kVoiceVLANPortTable

table
.1.3.6.1.4.1.5205.2.54.2.2.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kVoiceVLANPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kVoiceVLANPortTable' 
Show Voice Vlan configuration.
gel2esw26kVoiceVLANPortEntry row .1.3.6.1.4.1.5205.2.54.2.2.1.5.1
Indexes
Column Syntax OID
gel2esw26kVoiceVLANPort
port, range : 1 - port number.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.2.1.5.1.1
gel2esw26kVoiceVLANPortMode
Voice VLAN port mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members auto…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.2.1.5.1.2
gel2esw26kVoiceVLANPortSecurity
Voice VLAN port security mode.
default: 0,
0: Disable (Disjoin from Voice VLAN.)
1: enable ( Enable Voice VLAN security mode. When the function is
enabled, all non-telephone MAC address in Voice VLAN
…
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.2.1.5.1.3
gel2esw26kVoiceVLANPortDiscoveryProtocol
Voice VLAN port discovery protocol.
default: 0
0: OUI (Detect telephony device by OUI address.)
1: LLDP (Detect telephony device by LLDP.)
2: Both (Both OUI and LLDP.)
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.2.1.5.1.4

gel2esw26kVoiceVLANOUITable

table
.1.3.6.1.4.1.5205.2.54.2.2.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kVoiceVLANOUITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kVoiceVLANOUITable' 
Create Voice VLAN OUI entry. Modify OUI table will
restart auto detect OUI process.
gel2esw26kVoiceVLANOUIEntry row .1.3.6.1.4.1.5205.2.54.2.2.2.2.1
Indexes
Column Syntax OID
gel2esw26kVoiceVLANOUIIndex
 Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.5205.2.54.2.2.2.2.1.1
gel2esw26kVoiceVLANTelephonyOUI
OUI address, format : 0a 1b 2c
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.2.2.2.2.1.2
gel2esw26kVoiceVLANDescription
Up to 32 characters describing OUI address.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.2.2.2.2.1.3
gel2esw26kVoiceVLANOUIRowStatus
1: active
2: notInservice
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.2.2.2.2.1.4

gel2esw26kGARPConfTable

table
.1.3.6.1.4.1.5205.2.54.2.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kGARPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kGARPConfTable'
gel2esw26kGARPConfEntry row .1.3.6.1.4.1.5205.2.54.2.3.1.1
Indexes
Column Syntax OID
gel2esw26kGARPConfPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.1
gel2esw26kGARPJoinTimer
default: 200, range : 200 - 1000
Integer32r/w
Constraints:
range: 200-1000
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.2
gel2esw26kGARPLeaveTimer
default: 600 , range : 600 - 3000
Integer32r/w
Constraints:
range: 600-3000
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.3
gel2esw26kGARPLeaveAllTimer
default: 10000, range : 10000 - 50000
Integer32r/w
Constraints:
range: 10000-50000
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.4
gel2esw26kGARPApplicantion
default: 1
1: GVRP
Integer32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.5
gel2esw26kGARPAttributeType
default: 1
1: VLAN
Integer32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.6
gel2esw26kGARPApplicant
default: 0
0: normal-participant
1: non-participant
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.3.1.1.7

gel2esw26kGARPStatisticsTable

table
.1.3.6.1.4.1.5205.2.54.2.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kGARPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kGARPStatisticsTable' 
Show the basic GARP port statistics.
gel2esw26kGARPStatisticsEntry row .1.3.6.1.4.1.5205.2.54.2.3.2.1
Indexes
Column Syntax OID
gel2esw26kGARPStatisticsPort
port, range : 1 - port number.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.3.2.1.1
gel2esw26kGARPStatisticsPeerMAC
Peer MAC is MAC address of the neighbour Switch from with GARP frame is received.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.3.2.1.2
gel2esw26kGARPStatisticsFailedCount
explain Failed count here.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.2.3.2.1.3

gel2esw26kGVRPConfTable

table
.1.3.6.1.4.1.5205.2.54.2.4.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kGVRPConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kGVRPConfTable'
gel2esw26kGVRPConfEntry row .1.3.6.1.4.1.5205.2.54.2.4.1.2.1
Indexes
Column Syntax OID
gel2esw26kGVRPConfPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.4.1.2.1.1
gel2esw26kGVRPConfPortMode
default: 0
1: enable
0: disable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.4.1.2.1.2
gel2esw26kGVRPConfPortRRole
default: 0
1: enable
0: disable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.4.1.2.1.3

gel2esw26kGVRPStatisticsTable

table
.1.3.6.1.4.1.5205.2.54.2.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kGVRPStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kGVRPStatisticsTable'
gel2esw26kGVRPStatisticsEntry row .1.3.6.1.4.1.5205.2.54.2.4.2.1
Indexes
Column Syntax OID
gel2esw26kGVRPStatisticsPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.4.2.1.1
gel2esw26kGVRPStatisticsJoinTxCnt
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.2.4.2.1.2
gel2esw26kGVRPStatisticsLeaveTxCnt
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.2.4.2.1.3

gel2esw26kMirrorTable

table
.1.3.6.1.4.1.5205.2.54.2.6.2 · 1 row entry · 2 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kMirrorTable'
gel2esw26kMirrorEntry row .1.3.6.1.4.1.5205.2.54.2.6.2.1
Indexes
Column Syntax OID
gel2esw26kMirrorPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.6.2.1.1
gel2esw26kMirrorMode
default: 0
0: disable
1: enable
2: rx only
3: tx only
Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.5205.2.54.2.6.2.1.2

gel2esw26kACLPortsConfTable

table
.1.3.6.1.4.1.5205.2.54.2.9.1 · 1 row entry · 10 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kACLPortsConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kACLPortsConfTable'
gel2esw26kACLPortsConfEntry row .1.3.6.1.4.1.5205.2.54.2.9.1.1
Indexes
Column Syntax OID
gel2esw26kACLPortsConfPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.1
gel2esw26kACLPortsConfPolicyID
default: 0, range : 0 - 255
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.2
gel2esw26kACLPortsConfAction
default: 1,
0: Deny
1: Permit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.3
gel2esw26kACLPortsConfRateLimiterID
default: 0,
0: Disable
range : 0 - 16
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.4
gel2esw26kACLPortsConfPortRedirect
default: 0
0: Disable
range : 0 - end port number
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.5
gel2esw26kACLPortsConfMirror
default: 0
0: Disable
1: Enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.6
gel2esw26kACLPortsConfLogging
default: 0
0: Disable
1: Enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.7
gel2esw26kACLPortsConfShutdown
default: 0
0: Disable
1: Enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.8
gel2esw26kACLPortsConfState
default: 1
0: Disable
1: Enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.9
gel2esw26kACLPortsConfCounter
Counts the number of frames that match this ACE.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.2.9.1.1.10

gel2esw26kACLRateLimiterTable

table
.1.3.6.1.4.1.5205.2.54.2.9.2 · 1 row entry · 3 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kACLRateLimiterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kACLRateLimiterTable'
gel2esw26kACLRateLimiterEntry row .1.3.6.1.4.1.5205.2.54.2.9.2.1
Indexes
Column Syntax OID
gel2esw26kACLRateLimiterID
Rate Limiter ID.
range : 1-16
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.5205.2.54.2.9.2.1.1
gel2esw26kACLRateLimiterUnit
default: 0,
0: pps
1: kbps
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.2.1.2
gel2esw26kACLRateLimiterRate
default: 1,
range : <0-3276700> pps
<0-10000> kbps
Integer32r/w
Constraints:
range: 0-3276700
 .1.3.6.1.4.1.5205.2.54.2.9.2.1.3

gel2esw26kACLACETable

table
.1.3.6.1.4.1.5205.2.54.2.9.3.2 · 1 row entry · 50 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kACLACETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kACLACETable' 
Create ACL ACE entry.
gel2esw26kACLACEEntry row .1.3.6.1.4.1.5205.2.54.2.9.3.2.1
Indexes
Column Syntax OID
gel2esw26kACLACEIndex
 Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.1
gel2esw26kACLACEID
If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.2
gel2esw26kACLACENextID
If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.3
gel2esw26kACLACEIngressPort
Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.4
gel2esw26kACLACEPortPolicyNumber
policy value.
range : 0 - 255.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.5
gel2esw26kACLACEPortPolicyBitmask
policy bitmask.
range : 0 - 255(0xff).
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.6
gel2esw26kACLACEFrameType
0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp.
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.7
gel2esw26kACLACEAction
default: 1,
0: Deny
1: Permit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.8
gel2esw26kACLACEDenyPortRedirect
Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.9
gel2esw26kACLACELogging
default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.10
gel2esw26kACLACEMirror
default: 0,
0: disable - Frames matching the ACE are not mirrored.
1: enable - Frames matching the ACE are mirrored.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.11
gel2esw26kACLACERateLimiter
default: 0,
0: Disable
range : 0 - 16
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.12
gel2esw26kACLACEShutdown
default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.13
gel2esw26kACLACEVLAN8021QTagged
Specify whether frames can hit the action according to the 802.1Q tagged.
default: 2,
0: disable - Untagged frame only.
1: enable - Tagged frame only.
2: Any - Any value is allowed.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.14
gel2esw26kACLACEVLANTagPriority
Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.15
gel2esw26kACLACEVLANVID
Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.16
gel2esw26kACLACEEtherType
0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff).
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.17
gel2esw26kACLACESMAC
Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.18
gel2esw26kACLACEDMACType
DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
range : 0 - 4
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.19
gel2esw26kACLACEDMAC
Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Frame must be broadcast.
Unicast: Frame must…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.20
gel2esw26kACLACEArpOpcode
Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.21
gel2esw26kACLACEArpFlagsRequestReply
Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP flag set.
2: Any - Don't care.
3: No data.
…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.22
gel2esw26kACLACEArpFlagsArpSmac
Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SM…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.23
gel2esw26kACLACEArpFlagsRarpDmac
Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1: RARP frames where THA is equal to the …
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.24
gel2esw26kACLACEArpFlagsLength
Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06)…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.25
gel2esw26kACLACEArpFlagsIp
Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(1).
1: ARP/RARP frames where the HLD is …
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.26
gel2esw26kACLACEArpFlagsEthernet
Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x800).
1: ARP/RARP frames where the PRO is …
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.27
gel2esw26kACLACESIPType
Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.28
gel2esw26kACLACESIPIPAddress
A frame that hits this ACE matches this source IP address value.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.29
gel2esw26kACLACESIPNetworkPrefix
Network prefix.
default: 32,
0: No data.
range : 1 - 32
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.30
gel2esw26kACLACEDIPType
Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.32
gel2esw26kACLACEDIPIPAddress
A frame that hits this ACE matches this destination IP address value.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.33
gel2esw26kACLACEDIPNetworkPrefix
Network prefix.
default: 32,
0: No data.
range : 1 - 32
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.34
gel2esw26kACLACEIPProtocol
Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.36
gel2esw26kACLACEIPFlagsTTL
Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2: Any - Don't care.
3: No data.
range : 0…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.37
gel2esw26kACLACEIPFlagsOptions
Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.38
gel2esw26kACLACEIPFlagsFragment
Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater t…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.39
gel2esw26kACLACEICMPType
Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.40
gel2esw26kACLACEICMPCode
Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.41
gel2esw26kACLACESourcePortMin
Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.42
gel2esw26kACLACESourcePortMax
Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.43
gel2esw26kACLACEDestPortMin
Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.44
gel2esw26kACLACEDestPortMax
Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.45
gel2esw26kACLACETCPFlagsFin
Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.46
gel2esw26kACLACETCPFlagsSyn
Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.47
gel2esw26kACLACETCPFlagsRst
Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.48
gel2esw26kACLACETCPFlagsPsh
Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.49
gel2esw26kACLACETCPFlagsAck
Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.50
gel2esw26kACLACETCPFlagsUrg
Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : 0 - 2
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.51
gel2esw26kACLACERowStatus
1: active
2: notInservice
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.2.9.3.2.1.66

gel2esw26kACLACEStatusTable

table
.1.3.6.1.4.1.5205.2.54.2.9.3.6 · 1 row entry · 12 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kACLACEStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kACLACEStatusTable' 
ACL ACE Status entry.
gel2esw26kACLACEStatusEntry row .1.3.6.1.4.1.5205.2.54.2.9.3.6.1
Indexes
Column Syntax OID
gel2esw26kACLACEStatusIndex
 Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.1
gel2esw26kACLACEStatusUser
Indicates the ACL user.
S : Static.
IPMG : IP Management.
IPSG : IP Source Guard.
IPMC : IPMC.
ARPI : Arp Inspection.
UPnP : UPnP.
DHCP : DHCP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.2
gel2esw26kACLACEStatusID
ACE ID.
range : 1 - 256.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.3
gel2esw26kACLACEStatusIngressPort
Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.4
gel2esw26kACLACEStatusFrameType
Indicates the frame type of the ACE.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.5
gel2esw26kACLACEStatusAction
Indicates the forwarding action of the ACE.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.6
gel2esw26kACLACEStatusRateLimiter
Indicates the rate limiter number of the ACE.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.7
gel2esw26kACLACEStatusPortCopy
Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.8
gel2esw26kACLACEStatusMirror
Specify the mirror operation of this port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.9
gel2esw26kACLACEStatusCPU
Forward packet that matched the specific ACE to CPU.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.10
gel2esw26kACLACEStatusCounter
The counter indicates the number of times the ACE was hit by a frame.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.11
gel2esw26kACLACEStatusConflict
Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.9.3.6.1.12

gel2esw26kLoopProtectionConfigurationTable

table
.1.3.6.1.4.1.5205.2.54.2.12.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kLoopProtectionConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kLoopProtectionConfigurationTable' 
Show Loop Protection configurations.
gel2esw26kLoopProtectionConfigurationEntry row .1.3.6.1.4.1.5205.2.54.2.12.1.4.1
Indexes
Column Syntax OID
gel2esw26kLoopProtectionConfPort
port, range : 1 - port number.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.12.1.4.1.1
gel2esw26kLoopProtectionConfEnable
Configure loop protection port mode.
0: disable,
1: enable,
default: enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.12.1.4.1.2
gel2esw26kLoopProtectionConfAction
Configure loop protection port action.
0: Shutdown port,
1: Shutdown port and Log,
2: Log Only,
default: Shutdown port.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.5205.2.54.2.12.1.4.1.3
gel2esw26kLoopProtectionConfTxmode
Configure loop protection port transmit mode.
0: disable,
1: enable,
default: enable.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.2.12.1.4.1.4

gel2esw26kLoopProtectionStatusTable

table
.1.3.6.1.4.1.5205.2.54.2.12.2 · 1 row entry · 7 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kLoopProtectionStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kLoopProtectionStatusTable' 
Show Loop Protection Status.
gel2esw26kLoopProtectionStatusEntry row .1.3.6.1.4.1.5205.2.54.2.12.2.1
Indexes
Column Syntax OID
gel2esw26kLoopProtectionStatusPort
port, range : 1 - port number.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.1
gel2esw26kLoopProtectionStatusAction
The currently configured port action.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.2
gel2esw26kLoopProtectionStatusTransmit
The currently configured port transmit mode.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.3
gel2esw26kLoopProtectionStatusLoops
The number of loops detected on this port.
Integer32
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.4
gel2esw26kLoopProtectionStatusStatus
The current loop protection status of the port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.5
gel2esw26kLoopProtectionStatusLoop
Whether a loop is currently detected on the port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.6
gel2esw26kLoopProtectionStatusTimeLastLoop
The time of the last loop event detected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.2.12.2.1.7

gel2esw26kIPSourceGuardPortConfigTable

table
.1.3.6.1.4.1.5205.2.54.3.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kIPSourceGuardPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kIPSourceGuardPortConfigTable'
gel2esw26kIPSourceGuardPortConfigEntry row .1.3.6.1.4.1.5205.2.54.3.1.1.2.1
Indexes
Column Syntax OID
gel2esw26kIPSourceGuardPortConfigPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.1.1.2.1.1
gel2esw26kIPSourceGuardPortConfigMode
default: 0
0:disable
1:enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.1.1.2.1.2
gel2esw26kIPSourceGuardPortMaxDynamicClients
default: 99
0~2: Max Dynamic clients
99:Unlimited
Integer32r/w
Constraints:
range: 0-2
range: 99-99
 .1.3.6.1.4.1.5205.2.54.3.1.1.2.1.3

gel2esw26kIPSourceGuardStaticTable

table
.1.3.6.1.4.1.5205.2.54.3.1.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kIPSourceGuardStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kIPSourceGuardStaticTable'
gel2esw26kIPSourceGuardStaticEntry row .1.3.6.1.4.1.5205.2.54.3.1.2.2.1
Indexes
Column Syntax OID
gel2esw26kIPSourceGuardStaticIndex
 Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.1
gel2esw26kIPSourceGuardStaticPort
Port, range: 1 - port number.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.2
gel2esw26kIPSourceGuardStaticVLANId
VLAN ID, range: 1 - 4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.3
gel2esw26kIPSourceGuardStaticIPAddress
IP address allowed for doing IP source guard.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.4
gel2esw26kIPSourceGuardStaticMACAddress
Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.5
gel2esw26kIPSourceGuardStaticRowStatus
1: active
2: notInservice
3: edit
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.3.1.2.2.1.6

gel2esw26kIPSourceGuardDynamicTable

table
.1.3.6.1.4.1.5205.2.54.3.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kIPSourceGuardDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kIPSourceGuardDynamicTable'
gel2esw26kIPSourceGuardDynamicEntry row .1.3.6.1.4.1.5205.2.54.3.1.3.1
Indexes
Column Syntax OID
gel2esw26kIPSourceGuardDynamicIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.1.3.1.1
gel2esw26kIPSourceGuardDynamicPort
 Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.5205.2.54.3.1.3.1.2
gel2esw26kIPSourceGuardDynamicVLANId
 Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.5205.2.54.3.1.3.1.3
gel2esw26kIPSourceGuardDynamicIPAddress
 SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.3.1.3.1.4
gel2esw26kIPSourceGuardDynamicMACAddress
 SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5205.2.54.3.1.3.1.5

gel2esw26kARPInspectionConfTable

table
.1.3.6.1.4.1.5205.2.54.3.2.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kARPInspectionConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kARPInspectionConfTable'
gel2esw26kARPInspectionConfEntry row .1.3.6.1.4.1.5205.2.54.3.2.1.2.1
Indexes
Column Syntax OID
gel2esw26kARPInspectionConfPortIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.2.1.2.1.1
gel2esw26kARPInspectionConfPortMode
default: 0
0: disable
1: enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.2.1.2.1.2

gel2esw26kARPInspectionStaticTable

table
.1.3.6.1.4.1.5205.2.54.3.2.2.2 · 1 row entry · 6 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kARPInspectionStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kARPInspectionStaticTable'
gel2esw26kARPInspectionStaticEntry row .1.3.6.1.4.1.5205.2.54.3.2.2.2.1
Indexes
Column Syntax OID
gel2esw26kARPInspectionStaticIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.1
gel2esw26kARPInspectionStaticPort
Port, range: 1 - port number.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.2
gel2esw26kARPInspectionStaticVLANId
VLAN ID, range: 1 - 4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.3
gel2esw26kARPInspectionStaticIPAddress
IP address allowed for doing ARP request.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.4
gel2esw26kARPInspectionStaticMACAddress
Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.5
gel2esw26kARPInspectionStaticRowStatus
1: active
2: notInservice
3: edit
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.3.2.2.2.1.6

gel2esw26kARPInspectionDynamicTable

table
.1.3.6.1.4.1.5205.2.54.3.2.3 · 1 row entry · 5 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kARPInspectionDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kARPInspectionDynamicTable'
gel2esw26kARPInspectionDynamicEntry row .1.3.6.1.4.1.5205.2.54.3.2.3.1
Indexes
Column Syntax OID
gel2esw26kARPInspectionDynamicIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.2.3.1.1
gel2esw26kARPInspectionDynamicPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.2.3.1.2
gel2esw26kARPInspectionDynamicVLANId
 Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.5205.2.54.3.2.3.1.3
gel2esw26kARPInspectionDynamicIPAddress
 SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5205.2.54.3.2.3.1.4
gel2esw26kARPInspectionDynamicMACAddress
 SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5205.2.54.3.2.3.1.5

gel2esw26kDHCPSnoopingPortModeConfigurationTable

table
.1.3.6.1.4.1.5205.2.54.3.3.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kDHCPSnoopingPortModeConfigurationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kDHCPSnoopingPortModeConfigurationTable'
gel2esw26kDHCPSnoopingPortModeConfigurationEntry row .1.3.6.1.4.1.5205.2.54.3.3.1.2.1
Indexes
Column Syntax OID
gel2esw26kDHCPSnoopingPortModeConfigurationPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.3.1.2.1.1
gel2esw26kDHCPSnoopingPortModeConfigurationMode
default: 1
0: trust port mode
1: untrust port mode
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.3.1.2.1.2

gel2esw26kDHCPSnoopingStatisticsTable

table
.1.3.6.1.4.1.5205.2.54.3.3.2 · 1 row entry · 26 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kDHCPSnoopingStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kDHCPSnoopingStatisticsTable'
gel2esw26kDHCPSnoopingStatisticsEntry row .1.3.6.1.4.1.5205.2.54.3.3.2.1
Indexes
Column Syntax OID
gel2esw26kDHCPSnoopingStatisticsPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.1
gel2esw26kDHCPSnoopingStatisticsClear
default: 0
0: none
1: clear
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.2
gel2esw26kDHCPSnoopingRxDiscover
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.3
gel2esw26kDHCPSnoopingRxOffer
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.4
gel2esw26kDHCPSnoopingRxRequest
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.5
gel2esw26kDHCPSnoopingRxDecline
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.6
gel2esw26kDHCPSnoopingRxACK
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.7
gel2esw26kDHCPSnoopingRxNAK
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.8
gel2esw26kDHCPSnoopingRxRelease
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.9
gel2esw26kDHCPSnoopingRxInform
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.10
gel2esw26kDHCPSnoopingRxLeaseQuery
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.11
gel2esw26kDHCPSnoopingRxLeaseUnassigned
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.12
gel2esw26kDHCPSnoopingRxLeaseUnknown
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.13
gel2esw26kDHCPSnoopingRxLeaseActive
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.14
gel2esw26kDHCPSnoopingTxDiscover
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.15
gel2esw26kDHCPSnoopingTxOffer
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.16
gel2esw26kDHCPSnoopingTxRequest
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.17
gel2esw26kDHCPSnoopingTxDecline
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.18
gel2esw26kDHCPSnoopingTxACK
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.19
gel2esw26kDHCPSnoopingTxNAK
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.20
gel2esw26kDHCPSnoopingTxRelease
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.21
gel2esw26kDHCPSnoopingTxInform
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.22
gel2esw26kDHCPSnoopingTxLeaseQuery
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.23
gel2esw26kDHCPSnoopingTxLeaseUnassigned
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.24
gel2esw26kDHCPSnoopingTxLeaseUnknown
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.25
gel2esw26kDHCPSnoopingTxLeaseActive
 SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5205.2.54.3.3.2.1.26

gel2esw26kPortSecLimitCtrlTable

table
.1.3.6.1.4.1.5205.2.54.3.5.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortSecLimitCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortSecLimitCtrlTable'
gel2esw26kPortSecLimitCtrlEntry row .1.3.6.1.4.1.5205.2.54.3.5.1.2.1
Indexes
Column Syntax OID
gel2esw26kPortSecLimitCtrlPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.1
gel2esw26kPortSecLimitCtrlPortMode
default: 0
0: disable
1: enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.2
gel2esw26kPortSecLimitCtrlPortLimit
default: 4, range: 1-1024
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.3
gel2esw26kPortSecLimitCtrlPortAction
default: 0
0: none
1: trap
2: shutdown
3: trap&shutdown
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.4
gel2esw26kPortSecLimitCtrlPortState
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.5
gel2esw26kPortSecLimitCtrlPortReOpen
default: 0
0: none
1: reopen
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.5.1.2.1.6

gel2esw26kPortSecSwitchStatusTable

table
.1.3.6.1.4.1.5205.2.54.3.5.2 · 1 row entry · 5 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortSecSwitchStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortSecSwitchStatusTable'
gel2esw26kPortSecSwitchStatusEntry row .1.3.6.1.4.1.5205.2.54.3.5.2.1
Indexes
Column Syntax OID
gel2esw26kPortSecSwitchStatusPort
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.5.2.1.1
gel2esw26kPortSecSwitchStatusUsers
Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN,
'-' means that the corresponding user module is not enabled.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.2.1.2
gel2esw26kPortSecSwitchStatusState
Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.2.1.3
gel2esw26kPortSecSwitchStatusMACCountCurrent
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.5.2.1.4
gel2esw26kPortSecSwitchStatusMACCountLimit
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.5.2.1.5

gel2esw26kPortSecPortStatusTable

table
.1.3.6.1.4.1.5205.2.54.3.5.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kPortSecPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kPortSecPortStatusTable'
gel2esw26kPortSecPortStatusEntry row .1.3.6.1.4.1.5205.2.54.3.5.3.2.1
Indexes
Column Syntax OID
gel2esw26kPortSecPortStatusIndex
 Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.1
gel2esw26kPortSecPortStatusMACAddress
 SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.2
gel2esw26kPortSecPortStatusVLANId
 Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.3
gel2esw26kPortSecPortStatusState
Blocked / Forwarding
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.4
gel2esw26kPortSecPortStatusTimeOfAddition
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.5
gel2esw26kPortSecPortStatusAgeAndHold
 SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.5.3.2.1.6

gel2esw26kAccessMgtConfTable

table
.1.3.6.1.4.1.5205.2.54.3.6.1.3 · 1 row entry · 8 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kAccessMgtConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kAccessMgtConfTable'
gel2esw26kAccessMgtConfEntry row .1.3.6.1.4.1.5205.2.54.3.6.1.3.1
Indexes
Column Syntax OID
gel2esw26kAccessMgtIndex
Set Access Management config index
range : 1-16.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.1
gel2esw26kAccessMgtAddresstype
0: ipv4
1: ipv6
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.2
gel2esw26kAccessMgtStartIpAddress
Start IP address.
IP address doesn't allowed all zero or all 'ff'H.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.3
gel2esw26kAccessMgtEndIpAddress
End IP address.
IP address doesn't allowed all zero or all 'ff'H.
End ip address is not less than start ip address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.4
gel2esw26kAccessMgtHttpHttps
default: 0
0: disable
1: enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.5
gel2esw26kAccessMgtSNMP
default: 0
0: disable
1: enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.6
gel2esw26kAccessMgtTelnetSSH
default: 0
0: disable
1: enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.7
gel2esw26kAccessMgtRowStatus
1: active
2: notInservice
3: edit
4: destroy
5: undo
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.5205.2.54.3.6.1.3.1.8

gel2esw26kVeriPHYTable

table
.1.3.6.1.4.1.5205.2.54.4.5.9.2 · 1 row entry · 9 columns
Open in standard view
Uses the rubytech variant from /opt/observium/mibs/rubytech.
Command help
Walk gel2esw26kVeriPHYTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PRIVATETECH-GEL2ESW26K-MIB' -M '/opt/observium/mibs/rubytech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PRIVATETECH-GEL2ESW26K-MIB::gel2esw26kVeriPHYTable'
gel2esw26kVeriPHYEntry row .1.3.6.1.4.1.5205.2.54.4.5.9.2.1
Indexes
Column Syntax OID
gel2esw26kVeriPHYPort
The length (in meters) of the cable pair.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.1
gel2esw26kVeriPHYPairA
The status of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.2
gel2esw26kVeriPHYLengthA
The length (in meters) of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.3
gel2esw26kVeriPHYPairB
The status of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.4
gel2esw26kVeriPHYLengthB
The length (in meters) of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.5
gel2esw26kVeriPHYPairC
The status of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.6
gel2esw26kVeriPHYLengthC
The length (in meters) of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.7
gel2esw26kVeriPHYPairD
The status of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.8
gel2esw26kVeriPHYLengthD
The length (in meters) of the cable pair.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.5205.2.54.4.5.9.2.1.9