Send the trap when a module is inserted to the system. The OID value means
the port number.
feSW26StpStateDisabled
.1.3.6.1.4.1.5205.2.16.1.20.100
Send the trap when the operational state of STP is from enabled to disabled.
feSW26StpStateEnabled
.1.3.6.1.4.1.5205.2.16.1.20.101
Send the trap when the operational state of STP is from disabled to enabled.
feSW26StpTopologyChanged
.1.3.6.1.4.1.5205.2.16.1.20.102
Send the trap when RSTP determines a port should enter the FORWARDING state
(a topology change occurs). The OID value is the ifIndex of the port that
produces the topology change
feSW26RmonRisingAlarm
.1.3.6.1.4.1.5205.2.16.1.20.110
Send the trap when an RMON rising alarm happened. The OID value is the value
of another OID variable sampled by the RMON Alarm Group that exceeds its
own RisingThreshold
feSW26RmonFallingAlarm
.1.3.6.1.4.1.5205.2.16.1.20.111
Send the trap when an RMON falling alarm happened. The OID value is the value
of another OID variable sampled by the RMON Alarm Group that is smaller than its
own FallingThreshold
feSW26LacpStateDisabled
.1.3.6.1.4.1.5205.2.16.1.20.120
Send the trap when the operational state of LACP is from enabled to disabled.
The OID value means the disabled Group ID.
feSW26LacpStateEnabled
.1.3.6.1.4.1.5205.2.16.1.20.121
Send the trap when the operational state of LACP is from disabled to enabled.
The OID value means the disabled Group ID.
feSW26LacpPortAdded
.1.3.6.1.4.1.5205.2.16.1.20.123
Send the trap when the state of port is in 'trunk ready'.
feSW26LacpPortTrunkFailure
.1.3.6.1.4.1.5205.2.16.1.20.124
Send the trap when one port is not able to be aggregated
due to duplex-mode of the port.
feSW26GvrpStateDisabled
.1.3.6.1.4.1.5205.2.16.1.20.140
Send the trap when the operational state of GVRP is from enabled to disabled.
feSW26GvrpStateEnabled
.1.3.6.1.4.1.5205.2.16.1.20.141
Send the trap when the operational state of LACP is from disabled to enabled.
feSW26VlanPortBaseEnabled
.1.3.6.1.4.1.5205.2.16.1.20.151
Send the trap when the operational state of vlan is changed to port-based vlan.
feSW26VlanTagBaseEnabled
.1.3.6.1.4.1.5205.2.16.1.20.152
Send the trap when the operational state of vlan is changed to tag-based vlan.
feSW26VlanMetroBaseEnabled
.1.3.6.1.4.1.5205.2.16.1.20.153
Send the trap when the operational state of vlan is changed to metro-based vlan.
feSW26ModuleRemoved
.1.3.6.1.4.1.5205.2.16.1.20.2
Send the trap when a module is removed from the system. The OID value means
the port number.
feSW26UserLogin
.1.3.6.1.4.1.5205.2.16.1.20.200
Send the trap when one user logins the system.
feSW26UserLogout
.1.3.6.1.4.1.5205.2.16.1.20.201
Send the trap when one user logouts the system.
feSW26DualMediaSwapped
.1.3.6.1.4.1.5205.2.16.1.20.3
Send the trap when the dual media port changed. The OID value means the port number.
feSW26LoopDetected
.1.3.6.1.4.1.5205.2.16.1.20.5
Send the trap when loop condition has been detected. The OID value means the port number.