PPM-IGNIS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
222

slotsTable

table
.1.3.6.1.4.1.31225.1.1.4.1 · 1 row entry · 213 columns
Open in standard view
Uses the vialite variant from /opt/observium/mibs/vialite.
Command help
Walk slotsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PPM-IGNIS-MIB' -M '/opt/observium/mibs/vialite:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PPM-IGNIS-MIB::slotsTable' 
A table detailing the configuration and status information for the modules in the ViaLiteHD chassis
slotsEntry row .1.3.6.1.4.1.31225.1.1.4.1.1
A single slot entry.
Indexes
No indexes recorded
Column Syntax OID
modIx
Module index in slots table. Corresponds to module slot in the ViaLiteHD chassis
Integer32 .1.3.6.1.4.1.31225.1.1.4.1.1.1
modType
Module type.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.2
modPN
Module part number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.3
modFWPN
Module firmware part number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.4
modFWVer
Module firmware version and build date/time.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.5
modSN
Module serial number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.6
modOemNumber
Module OEM number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.7
modCustomerID
Module customer ID.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.8
modMonLifeCounter
Module working hours counter. Increments every 2 hours of continuous operation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.9
modMonPanelComp
Module Front Panel type bitmap.
Encoded as two 4 bit nibbles (LSNibble for the lower(B) front panel port, MSNibble for the upper (A) front panel port).
Port type encoded as: Not Fitted=0x0, SMA=0x1, BNC=0x2.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.10
modMonPanelLEDS
A bitmap representation of the module front panel LEDs.
Each LED is a 4 bit nibble, encoded as: Green=0x1, Red=0x3, Red&Flashing=0x7
Nibbles are arranged (LSB->MSB) PWR LED, ALM LED.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.11
modLabel
Module type label.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.12
modFreeText
User defined module name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.13
modFwDate
Firmware build date
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.1.1.4.1.1.14
modWaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.15
modWaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
x 0.01nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.16
modTx1MonSuppVoltage
Tx1 Current supply voltage measured in mV. Nominal 12000mV
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.20
modTx1MonLaserBias
Tx1 Current laser bias current measurement, measured in uA.
uAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.21
modTx1MonLaserPower
Tx1 Current laser power measurement, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.22
modTx1MonRfPower
Tx1 Current RF power, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.23
modTx1MonRfGain
Tx1 Current RF gain, measured in 10mdB.
x 10mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.24
modTx1MonFeedI
Tx1 External feed current [0.1mA].
x 0.1mAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.25
modTx1MonFeedV
Tx1 External feed voltage [mV].
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.26
modTx1MonStatus
Bitmap encoding of the current configuration status of the Tx1 module.
Bit 0: Laser Status (0=Enabled, 1=Disabled)
1: FSK Tone (Digital Channel) Status (0=Enabled, 1=Disabled)
2: Manual Gain Control (MGC) Status (0=Di…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.27
modTx1MonAlarms
Bitmap encoding of the current alarm status of the Tx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm
1: Minor Alarm
2: Laser Alarm
3: Automatic Gain Control (AGC) Alarm
4: TEC Alarm
5-7: Unus…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.28
modTx1MonInputPower
Tx1 Input power level, measured in 10mdBm
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.29
modTx1MonTECTemprtr
Tx1 Laser TEC (Thermo-Electric Cooler) temperature, measured in degrees Centigrade.
degCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.30
modTx1MonTEC
Tx1 Laser TEC (Thermo-Electric Cooler) current, measured in 0.1mA
x 0.1mAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.31
modTx2MonSuppVoltage
Tx2 Current supply voltage measured in mV.
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.40
modTx2MonLaserBias
Tx2 Current laser bias current measurement [uA].
uAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.41
modTx2MonLaserPower
Tx2 Current laser power measurement, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.42
modTx2MonRfPower
Tx2 Current RF power, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.43
modTx2MonRfGain
Tx2 Current RF gain, measured in 10mdB.
x 10mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.44
modTx2MonFeedI
Tx2 External feed current [0.1mA].
0.1mAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.45
modTx2MonFeedV
Tx2 External feed voltage [mV].
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.46
modTx2MonStatus
Bitmap encoding of the current configuration status of the Tx2 module.
Bit 0: Laser Status (0=Enabled, 1=Disabled)
1: FSK Tone (Digital Channel) Status (0=Enabled, 1=Disabled)
2: Manual Gain Control (MGC) Status (0=Di…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.47
modTx2MonAlarms
Bitmap encoding of the current alarm status of the Tx2 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm
1: Minor Alarm
2: Laser Alarm
3: Automatic Gain Control (AGC) Alarm
4: TEC Alarm
5-7: Unus…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.48
modTx2MonInputPower
Tx2 Input power level, measured in 10mdBm
x 10mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.49
modTx1CfgGainSoftSet
Tx1 Software Gain Control (SGC) Gain setting, measured in 10mdB
x 10mdBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.60
modTx1CfgAgcTarget
Tx1 Automatic Gain Control target, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.61
modTx1CfgLaserDisable
Module Tx1 Laser enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.62
modTx1CfgFskDisable
Module Tx1 FSK Tone (Digital Channel) Enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.63
modTx1CfgAgc
Module Tx1 Automatic Gain Control enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.64
modTx1CfgSgc
Module Tx1 Software Gain Control enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.65
modTx1CfgGpsLoad
Tx1 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.66
modTx1CfgRFPlevelHigh
Tx1 Rf Power level alarm high threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.67
modTx1CfgRFPlevelLow
Tx1 Rf Power level alarm low threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.68
modTx1CfgLnbAlarm
Tx1 LNB voltage alarm severity.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.69
modTx1CfgTECcontroldeprecated
Module Tx1 TEC control enable/disable.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.70
modTx2CfgGainSoftSet
Tx2 Software Gain Control (SGC) Gain setting, measured in 10mdB
x 10mdBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.80
modTx2CfgAgcTarget
Tx2 Automatic Gain Control (AGC) target, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.81
modTx2CfgLaserDisable
Module Tx2 Laser enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.82
modTx2CfgFskDisable
Module Tx2 FSK Tone (Digital Channel) Enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.83
modTx2CfgAgc
Module Tx2 Automatic Gain Control (AGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.84
modTx2CfgSgc
Module Tx2 Software Gain Control (SGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.85
modTx2CfgGpsLoad
Module Tx2 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.86
modTx2CfgRFPlevelHigh
Tx2 Rf Power level alarm high threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.87
modTx2CfgRFPlevelLow
Tx2 RF Power level alarm low threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.88
modTx2CfgLnbAlarm
Module Tx2 LNB voltage alarm severity.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.89
modTx1InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.100
modTx1InterBiasSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.101
modTx1InterPowerSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.102
modTx1InterPowerCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.103
modTx1InterGainDef
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.104
modTx1InterRfMonCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.105
modTx1InterFskFreqSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.106
modTx1InterRfGainCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.107
modTx1InterMonitorMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.108
modTx1InterAlarmMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.109
modTx2InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.120
modTx2InterBiasSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.121
modTx2InterPowerSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.122
modTx2InterPowerCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.123
modTx2InterGainDef
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.124
modTx2InterRfMonCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.125
modTx2InterFskFreqSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.126
modTx2InterRfGainCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.127
modTx2InterMonitorMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.128
modRx1MonSuppVoltage
Rx1 Current supply voltage measured in mV.
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.140
modRx1MonRLLBias
Module Rx1 Photodiode received light level [0.01dBm].
x 0.01dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.141
modRx1MonRfPower
Module Rx1 current RF power [mdBm].
mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.142
modRx1MonRfGain
Module Rx1 current RF gain [mdB].
mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.143
modRx1MonStatus
Bitmap encoding of the current configuration status of the Rx1 module.
Bit 0: FSK (Digital Channel) Detection Status (0=Not Detected, 1=Detected)
1: FSK (Digital Channel) Detection (0=Enabled, 1=Disabled)
2: Manual Ga…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.144
modRx1MonAlarms
Bitmap encoding of the current alarm status of the Rx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm
1: Minor Alarm
2: Automatic Gain Control (AGC) Alarm
3-7: Unused

Bit 8: Suppl…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.145
modRx1MonOutputPower
Rx1 Current output RF power level, measured in 10mdBm
10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.146
modRx2MonSuppVoltage
Rx2 Current supply voltage measured value [mV].
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.160
modRx2MonRLLBias
Rx2 Photodiode received light level [0.01dBm].
x 0.01dBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.161
modRx2MonRfPower
Rx2 Current RF power [mdBm].
mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.162
modRx2MonRfGain
Rx2 Current RF gain [mdB].
mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.163
modRx2MonStatus
Bitmap encoding of the current configuration status of the Rx1 module.
Bit 0: FSK (Digital Channel) Detection Status (0=Not Detected, 1=Detected)
1: FSK (Digital Channel) Detection (0=Enabled, 1=Disabled)
2: Manual Ga…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.164
modRx2MonAlarms
Bitmap encoding of the current alarm status of the Rx1 module. All bits are encoded as 0=NoAlarm 1=Alarm
Bit 0: Major Alarm
1: Minor Alarm
2: Automatic Gain Control (AGC) Alarm
3-7: Unused

Bit 8: Suppl…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.165
modRx2MonOutputPower
Rx2 Current output RF power level, measured in 10mdBm
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.166
modRx1CfgGainSoftSet
Rx1 Software Gain Control (SGC) setting measured in 10mdB.
x 10mdBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.180
modRx1CfgAgcTarget
Rx1 Automatic Gain Control target, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.181
modRx1CfgFskDisable
Rx1 Digital Channel Frequency Shift Keying (FSK) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.182
modRx1CfgAgc
Rx1 Automatic Gain Control (AGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.183
modRx1CfgSgc
Rx1 Software Gain Control (SGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.184
modRx1CfgAgcMode
Rx1 Automatic Gain Control (AGC) mode select.
If in AGC RF Level mode, the AGC control loop will adjust the RF gain to maintain a constant RF power output
If in AGC RLL (Received Light Level) mode, the receiver will att…
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.185
modRx1CfgGpsLoad
Rx1 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.186
modRx1CfgRFPlevelHigh
Rx1 RF Power level alarm high threshold, measured in 10mdBm
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.187
modRx1CfgRFPlevelLow
Rx1 RF Power level alarm low threshold, measured in 10mdBm
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.188
modRx2CfgGainSoftSet
Rx2 Software Gain Control (SGC) level measured in 10mdB.
x 10mdBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.200
modRx2CfgAgcTarget
Rx2 Automatic Gain Control (AGC) target, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.201
modRx2CfgFskDisable
Rx2 Digital Channel Frequency Shift Keying (FSK) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.202
modRx2CfgAgc
Rx2 Automatic Gain Control (AGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.203
modRx2CfgSgc
Rx2 Software Gain Control (SGC) enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.204
modRx2CfgAgcMode
Rx2 Automatic Gain Control (AGC) mode select.
If in AGC RF Level mode, the AGC control loop will adjust the RF gain to maintain a constant RF power output
If in AGC RLL (Received Light Level) mode, the receiver will att…
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.205
modRx2CfgGpsLoad
Rx2 GPS dummy load enable/disable. If the module does not support GPS mode, this will have no effect.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.206
modRx2CfgRFPlevelHigh
Rx2 RF Power level alarm high threshold, measured in 10mdBm
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.207
modRx2CfgRFPlevelLow
Rx2 RF Power level alarm low threshold, measured in 10mdBm
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.208
modRx1InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.220
modRx1InterBiasSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.221
modRx1InterGainDef
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.222
modRx1InterRfMonCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.223
modRx1InterFskFreqSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.224
modRx1InterFskSlicSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.225
modRx1InterRfGainCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.226
modRx1InterMonitorMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.227
modRx1InterAlarmMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.228
modRx2InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.240
modRx2InterBiasSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.241
modRx2InterGainDef
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.242
modRx2InterRfMonCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.243
modRx2InterFskFreqSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.244
modRx2InterFskSlicSet
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.245
modRx2InterRfGainCal
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.246
modRx2InterMonitorMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.247
modRx2InterAlarmMask
Internal system information.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.248
modAmpMonVcc
Amplifier supply voltage, measured in mV.
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.260
modAmpMonTemp
Amplifier temperature, measured in degrees Celsius
degCInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.261
modAmp1MonRf
Amplifier 1 Current RF level, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.262
modAmp1MonRfGain
Amplifier 1 RF gain, measured in 10mdB.
x 10mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.263
modAmp1MonStatus
Bitmap encoding of the current configuration status of the Amplifier card:
Bit 0: Amplifier 2 Automatic Gain Control (AGC) Status (0=Disabled, 1=Enabled)
1: Amplifier 1 Automatic Gain Control (AGC) Status (0=Disabled, …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.264
modAmp1MonAlarms
Bitmap encoding of the current alarm status of the amplifier card: (All alarms encoded as 0=NoAlarm, 1=Alarm)
Bit 0: Amplifier 2 RF Gain Alarm
1: Amplifier 2 RF Level Alarm
2: Temperature Alarm
3: Amplifier 1 RF Gain…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.265
modAmp2MonRf
Amplifier 2 Current RF level, measured in 10mdBm.
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.280
modAmp2MonRfGain
Amplifier 2 RF gain, measured in 10mdBm.
x 10mdBInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.281
modAmp2MonStatus
Bitmap encoding of the current configuration status of the Amplifier card:
Bit 0: Amplifier 1 Automatic Gain Control (AGC) Status (0=Disabled, 1=Enabled)
1: Amplifier 2 Automatic Gain Control (AGC) Status (0=Disabled, …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.282
modAmp2MonAlarms
Bitmap encoding of the current alarm status of the amplifier card: (All alarms encoded as 0=NoAlarm, 1=Alarm)
Bit 0: Amplifier 2 RF Gain Alarm
1: Amplifier 2 RF Level Alarm
2: Temperature Alarm
3: Amplifier 1 RF Gain…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.283
modAmp1CfgGainSoftSet
Amp 1 Software Gain Control (SGC) gain setting, measured in 10mdB
x 10mdBInteger32r/w .1.3.6.1.4.1.31225.1.1.4.1.1.300
modAmp1CfgAgcTarget
Amp 1 Automatic Gain Control (AGC) target, measured in 10mdBm.
x 10mdBmInteger32r/w .1.3.6.1.4.1.31225.1.1.4.1.1.301
modAmp1InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.302
modAmp1InterGainCal
Amp 1 Gain calibration.
Integer32 .1.3.6.1.4.1.31225.1.1.4.1.1.303
modAmp1InterRfMonCal
Amp 1 RF level monitor calibration.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.304
modAmp1InterAgcCtrl
Amp 1 Automatic Gain Control setting.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.305
modAmp2CfgGainSoftSet
Amp 1 Software Gain Control (SGC) gain setting, measured in 10mdB
x 10mdBInteger32r/w .1.3.6.1.4.1.31225.1.1.4.1.1.320
modAmp2CfgAgcTarget
Amp 2 Automatic Gain Control (AGC) target, measured in 10mdBm.
x 10mdBmInteger32r/w .1.3.6.1.4.1.31225.1.1.4.1.1.321
modAmp2InterRange
Internal system information.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.322
modAmp2InterGainCal
Amp 2 Gain calibration.
Integer32 .1.3.6.1.4.1.31225.1.1.4.1.1.323
modAmp2InterRfMonCal
Amp 2 RF level monitor calibration.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.324
modAmp2InterAgcCtrl
Amp 2 Automatic Gain Control enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.325
modAmp1LvlLimitHCtrl
Amp 1 RF Level high alarm threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.330
modAmp1LvlLimitLCtrl
Amp 1 RF Level low alarm threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.331
modAmp2LvlLimitHCtrl
Amp 2 RF Level high alarm threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.332
modAmp2LvlLimitLCtrl
Amp 2 RF Level low alarm threshold, measured in 10mdBm.
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.333
modAmpGainAlThCtrl
Amplifier Gain warning threshold, measured in 10mdB.
This threshold is measured from the alarm thresholds (typically a low threshold of 15dB, and a high threshold of 30dB),
i.e, if the Alarm threshold is 10dB, and this …
x 10mdBInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.334
modAmpLvlAlThCtrl
Amplifier RF Level warning threshold, measured in 10mdBm.
This threshold is measured from the alarm threshold,
i.e, if the Alarm threshold is 10dBm, and this warning threshold is set at 2dBm, the warning shall be trigge…
x 10mdBmInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.335
modSwtchMonModeSetting
Switch mode status.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.350
modSwtchMonStatus
Bitmap encoding of the current switch status.
Bit 0-3: Unused
4: Switch Direction (1=Left, 0=Right)
5-11: Unused
12-13: Front Panel ALM LED status (00=off, 01=Green, 11=Red)
14-15: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.351
modSWAlarmBitMap
Bitmap encoding of the current switch alarm status.
Bit 0-1: Unused
2: Minor Alarm
3: Major Alarm
4-15: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.352
modSwtchModeSetting
Switch mode control
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.355
modLNBAlarmMask
LNB masking for invalid alarms. Bit 0 = major, Bit 8= OLF
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.360
modLNBbitAUX
LNB Auxillary Mode setting: ON = Set Vout to +22V nominal.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.361
modLNBbitITEST
LNB Current threshold setting. Options are Low (6mA) or High (12mA)
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.362
modLNBbitEN
LNB Module Power block enable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.363
modLNBbitVSEL
LNB Module Output voltage select. Options are High (18V nominal), or Low (13V Nominal).
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.364
modLNBbitLLC
LNB Cable compensation setting. If enabled, the output voltage is boosted by an additional +1V.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.365
modLNBbitTEN
LNB 22kHz tone enable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.366
modLNBbitTTX
LNB 22kHz tone output switch.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.367
modLNBbitPCL
LNB Current limit mode selector.
Static mode uses a simple clamp current limit.
Active mode uses a pulsed current limit
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.368
modLNBbitOLF
LNB Overload flag.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.369
modLNBbitOTF
LNB Over Temperature flag.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.370
modLNBMonStatus
Bitmap of the current status of the LNB module
Bit 0: Power Block Enable (0=Disabled, 1=Enabled)
1: Output Voltage Setting (0=Low(13V), 1=High(18V))
2: Cable Compensation setting (0=None, 1=Boost(additional 1V))
3: T…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.371
modLNBDIPSwitch
Bitmap of the DIP switch settings on the LNB Module. All bits are encoded as 0=disabled, 1=enabled
Bit 0: Power Block Enable
1: High Voltage output
2: Tone
3: Cable Compensation
4: Aux Mode
5-7: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.372
modLNBAlarmStatus
Bitmap of the LNB alarm status. All bits are encoded as 0=noAlarm, 1= Alarm.
Bit 0: Overload Alarm
1: Over Temperature Alarm
2-7: Unused

8: Major Alarm
9: Minor Alarm
10-15: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.373
modETHMonSupplyVolt
Ethernet module supply voltage, measured in mV
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.380
modETHMonLinkdataRate
Ethernet module Fibre Link data rate bitmap. All bits are encoded as 0=noLink, 1=Link).
Bit 0-4: Unused
5: Valid 100BASE Link
6: Valid 1000BASE Link
7: Valid Link (any speed)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.381
modETHMonDataActivity
Ethernet data activity bitmap.
Bit 0-2: Unused
3: Activity (0=noActivity, 1=Activity)
4-7: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.382
modETHMonAlarms
Ethernet module alarms bitmap. All bits are encoded as 0=noAlarm, 1=Alarm
Bit 0-1: Unused
2: Minor Alarm
3: Major Alarm
4-7: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.383
modETHMonCopperdataRate
Ethernet module Copper Link data rate bitmap. All bits are encoded as 0=noLink, 1=Link).
Bit 0-3: Unused
4: Valid 10BASE link
5: Valid 100BASE Link
6: Valid 1000BASE Link
7: Valid Link (any speed)
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.384
modETHMonCopperActivity
Ethernet module Copper Link activity bitmap.
Bit 0: Unused
1: Duplex (0=Half Duplex, 1=Full Duplex)
2: Collision (0=noCollision, 1=Collision Detected)
3: Activity (0=noActivity, 1=Activity)
4-7: Unused
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.385
modSERMonLinkdataRate
Serial data module link data rate.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.390
modSERMonDataActivity
Serial data module data activity.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.391
modSERMonSerialAlarm
Serial data alarm bitmap. All bits are encoded as 0=noAlarm, 1=Alarm.
Bit 0: Vcc Alarm
1: Laser Power Alarm
2: RLL (Received Light Level) Alarm
3: Temperature Alarm
4-7: Unused

8: Major Alarm
9: Mi…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.392
modSERMonChannel1Type
Serial data - Channel 1 type.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.393
modSERMonChannel2
Serial data - Channel 2 type.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.394
modSERMonSupplyVolt
Serial data - Supply voltage.
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.395
modSERMonLaserPower
Serial Digital Module Laser optical power [10mdBm].
x 10mdBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.396
modSERMonRLLLevel
Serial Digital Module RLL level [10mdBm].
x 10mDBmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.397
modSERMonDipManualMode
Serial Digital Module Manual Mode DIP switch status.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.398
modSERCfgChannelRate
Serial Digital Module channel data rate setting.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.420
modSERCfgTTlImpedance
Serial Digital Module TTL Impedance setting.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.421
modSERCfgLaserDisable
Serial Digital Module Laser enable/disable.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.422
modPROCDescription
PROC module description.
OctetString .1.3.6.1.4.1.31225.1.1.4.1.1.423
modMaintenanceMode
Module Maintenance Mode.
When in maintenance mode, a module will not produce events/traps and will not contribute to the summary alarm outputs.
Other module OIDs will be updated as normal.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.430
modG6CardMonSupplyVolt
Card supply voltage, measured in mV.
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.440
modG6Dev1CfgBiasTSrc
Set bias-t source.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.452
modG6Dev1MonFeedI
External feed current [0.01mA].
x 0.01mAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.454
modG6Dev1MonFeedV
External feed voltage [mV].
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.455
modG6Dev1Type
RF device 1 type.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.456
modG6Dev1WaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.457
modG6Dev1WaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
x 0.01nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.458
modG6Dev1CfgAFDThr
Antenna fault detection low current threshold
x 0.01mAInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.464
modG6Dev1CfgAFDEn
Antenna fault detection enable
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.465
modG6Dev1CfgAGCMode
Enable automatic gain control based on received light level (RLL)
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.466
modG6Dev2CfgBiasTSrc
Set bias-t source.
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.472
modG6Dev2MonFeedI
External feed current [0.01mA].
x 0.01mAInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.474
modG6Dev2MonFeedV
External feed voltage [mV].
mVInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.475
modG6Dev2Type
RF device 2 type.
Enumeration .1.3.6.1.4.1.31225.1.1.4.1.1.476
modG6Dev2WaveLenInteger
Optical Wavelength (integer part). Given in nm (truncated)
nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.477
modG6Dev2WaveLenDecimal
Optical Wavelength (decimal part). Given in 0.01nm
x 0.01nmInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.478
modG6Dev2CfgAFDThr
Antenna fault detection low current threshold
x 0.01mAInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.1.1.4.1.1.484
modG6Dev2CfgAFDEn
Antenna fault detection enable
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.485
modG6Dev2CfgAGCMode
Enable automatic gain control based on received light level (RLL)
Enumerationr/w .1.3.6.1.4.1.31225.1.1.4.1.1.486

trapsTable

table
.1.3.6.1.4.1.31225.5.3 · 1 row entry · 9 columns
Open in standard view
Uses the vialite variant from /opt/observium/mibs/vialite.
Command help
Walk trapsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PPM-IGNIS-MIB' -M '/opt/observium/mibs/vialite:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PPM-IGNIS-MIB::trapsTable' 
A table that contains the last trapsTableMaximumSize traps.
trapsEntry row .1.3.6.1.4.1.31225.5.3.1
A trap entry to the trap table
Indexes
No indexes recorded
Column Syntax OID
trapsSequenceID
Sequence number of the trap in the last traps table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31225.5.3.1.1
trapsTick
Timetick when the current trap was sent.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31225.5.3.1.2
trapsDate
System date when the current trap was sent.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.5.3.1.3
trapsTime
System time when the current trap was sent.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31225.5.3.1.4
trapsSeverity
The severity of the trap instance.
Enumeration .1.3.6.1.4.1.31225.5.3.1.5
trapsSpecificType
The specific type of trap instance.
Enumeration .1.3.6.1.4.1.31225.5.3.1.6
trapsModuleType
Additional data sent with the trap. This is the module type that generated the trap.
Enumeration .1.3.6.1.4.1.31225.5.3.1.7
trapsSlotIndex
Additional data sent with the trap. The module which generated the trap was in this slot in the ViaLiteHD chassis.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.31225.5.3.1.8
trapsSpecificCard
This define if the upper or lower card generated the trap.
Enumeration .1.3.6.1.4.1.31225.5.3.1.9