POWERSUPPLY-MIB Table View

This table contains one row per switch power supply entity.

hpicfPsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1

Information about the power supply physical entity
table.

Indexes

hpicfPsBayNum

Column	Syntax	OID
hpicfPsBayNum The index of switch power supply entity.	HpicfDcPsIndex	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.1
hpicfPsState The physical state of the switch power supply entity.	HpicfDcPsState Type Values: 1 psNotPresent 2 psNotPlugged 3 psPowered 4 psFailed 5 psPermFailure 6 psMax 7 psAuxFailure 8 psNotPowered 9 psAuxNotPowered	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2
hpicfPsFailures Number of times power supply has failed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.3
hpicfPsTemp The temperature of the power supply in Celsius	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4
hpicfPsVoltageInfo The voltage info and max current of power supply. e.g. AC 120V/220V.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.5
hpicfPsWattageCur The present power supply wattage information	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.6
hpicfPsWattageMax The maximum wattage of the power supply.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.7
hpicfPsLastCall The number of seconds since the switch power supply is up.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.8
hpicfPsModel This object provides the model number of the power supply unit and it is specified as the Jnumber.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.9

This table contains one row per  port of this
zone of the external power supply.

hpicfXpsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1

Information about all the ports on the external power supply.
On a stack, each member can be connected to the one of the
ports of the external power supply. With entPhysicalIndex,
the information about the required m…

Indexes

ENTITY-MIBentPhysicalIndex hpicfXpsConnectingPort

Column	Syntax	OID
hpicfXpsConnectingPort This is the port which connects the switch to the current zone of the external power supply. External power supply has 3 zones. In zone 1, user can connect upto 4 switches. In zones 2 and 3, user can connect upto 2 s…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.1
hpicfXpsPortOperStatus Operating status of the port which connects the switch to the external power supply . By default, all the ports are enabled.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.2
hpicfXpsSwitchSerialNo This is the serial number of the switch connected to the current port of the external power supply.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.3
hpicfXpsConnectionState The connection status between the external power supply and the switch.	HpicfXpsConnectionStatus Type Values: 0 notConnected 1 unavailable 2 available 3 active 4 mismatch 5 notReady 6 overCurrent 7 cannotPower 8 autoDisabled	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.4
hpicfXpsSysName This indicates the name of the system connected to the current port of the external power supply.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.5
hpicfXpsMACAddress MAC address of the switch connected to the current port of the external power supply.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.6
hpicfXpsSwitchOSVersion This MIB object specifies the OS version of the switch connected to the current port of the external power supply.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.7
hpicfXpsSwitchIpsVoltage Internal power supply voltage of the switch connected to this port of the external power supply.	VoltsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.8
hpicfXpsSwitchIpsWattage Internal power supply wattage of the switch connected to this port of the external power supply.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.9
hpicfXpsPower The power allocated from the external power supply to the switch connected to this port. External power is available when both the internal power supply and external power supply are operational. The amount of availab…	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.10
hpicfXpsSupportedCableVersion Cable record version supported by the switch software of the switch connected to the current cable. This object will be useful for debugging when switches connected to a common zone has different versions.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.11
hpicfXpsSupportedZoneVersion Zone record version supported by the switch software of the switch connected to the current port of the external power supply. Configurations are not allowed if there is any mismatch between supported zone version an…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.12
hpicfXpsSwitchModType J number of the switch connected to the current cable of external power supply.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.2.1.13

This table contains one row per system which is
connected to the external power supply.

hpicfXpsSwitchConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1

This provides the configuration information
of the switch that is connected to external
power supply.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfXpsSwitchAdminStatus Administrative status of the switch that is connected to the external power supply.By default, the status is enabled and the switch will receive backup power and additional PoE power upon connecting to the external po…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.1
hpicfXpsSwitchAutoRecovery The status of external power supply auto recovery on the switch that is currently connected to the external power supply.By default, auto-recovery feature is enabled on the switch and there is automatic recovery after…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.2
hpicfXpsAllowPortsSupported From this object, the amount of PoE power allocated to the current switch can be reduced, which might turn off some of the low priority PoE ports. This object can be set only on a PoE switch. When the new switch is bei…	Unsigned32r/w Constraints: range: 2-4	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.3
hpicfXpsReset This object indicates the type of reset operation that will be performed on the current zone of the external power supply. All the configurations can be restored to factory default settings with 'factoryReset' option, w…	Enumerationr/w Enumerated Values: 1 noReset 2 factoryReset	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.4
hpicfXpsType The name of the external power supply.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.5
hpicfXpsSerialNum The serial number of the external power supply.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.6
hpicfXpsModuleName This indicates the J number of the external power supply.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.7
hpicfXpsPowerShareReqStatus Status of the external power supply power share request. Set requests for hpicfXpsPowerDistMap will take longer time for completion.This object can be used to get the status of the set request. The following are the po…	Enumeration Enumerated Values: 1 idle 2 inProgress 3 success 4 failed	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.8
hpicfXpsResetReqStatus Status of the external power supply reset request. Set requests for hpicfXpsReset will take longer time for completion. This object can be used to get the status of the set request. The following are the possible valu…	Enumeration Enumerated Values: 1 idle 2 inProgress 3 success 4 failed	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.3.1.9

This table contains one row per zone of the external
power supply.

hpicfXpsZoneEntry row .1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1

Information about this zone of external power supply.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpicfXpsZoneNo This indicates the zone number of the external power supply. The external power supply has 3 zones.	Unsigned32 Constraints: range: 1-3	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.1
hpicfXpsZoneState Physical state of the current zone of the external power supply.	HpicfXpsZoneStatus Type Values: 1 notConnected 2 notReady 3 faulted 4 powered 5 inReset	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.2
hpicfXpsZonePowerShareMap This indicates the power share map on the current zone. The map indicates the ports on the external power supply that is configured to deliver power to the connected switches. Zone 1 has 4 ports: A-D. Zone 2 and 3 have …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.3
hpicfXpsZoneVoltage The voltage information of the external power supply in this zone.	VoltsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.4
hpicfXpsZoneWattage The wattage information of the current zone of the external power supply.	WattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.5
hpicfXpsPSURev This indicates the revision number of the power supply unit that resides in this zone.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.6
hpicfXpsPSUModule This indicates the J number of the power supply unit that resides in this zone.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.7
hpicfXpsZonePowerShareForce When this option is set as true then hpicfXpsZonePowerShar will change in un-graceful manner where all low priority P devices connected to these ports will be shut-down tempora When this option is set as false then hpic…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.8
hpicfXpsZoneRecordVersion Zone record version of the current zone of external power supply. This object is needed for debugging purpose when there is a difference between hpicfXpsSupportedZoneVersion and this object. Configurations are not all…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.55.1.4.1.9