 loginOK
| .1.3.6.1.4.1.2684.1.1.0.1 | Sent when an administrator logs in via embedded UI, ftp, telnet or web. |
micChange
| .1.3.6.1.4.1.2684.1.1.0.10 | Sent when a mic pod or VTX is connected or disconnected and includes the total mic count. |
autoAnswerChange
| .1.3.6.1.4.1.2684.1.1.0.11 | Sent when the auto answer setting is changed. |
timeServerUp
| .1.3.6.1.4.1.2684.1.1.0.12 | Sent when the time server successfully connects. |
timeServerDown
| .1.3.6.1.4.1.2684.1.1.0.13 | Sent when the time server is enabled but does not connect correctly. |
timeServerOn
| .1.3.6.1.4.1.2684.1.1.0.14 | Sent when the time server is enabled. |
| timeServerOff | .1.3.6.1.4.1.2684.1.1.0.15 | Sent when the time server is disabled. |
gdsUp
| .1.3.6.1.4.1.2684.1.1.0.16 | Sent when a global directory server successfully connects. |
gdsDown
| .1.3.6.1.4.1.2684.1.1.0.17 | Sent when a global directory server is enabled, but not connected correctly. |
gdsOff
| .1.3.6.1.4.1.2684.1.1.0.18 | Sent when a global directory server is disabled. |
gatekeeperReg
| .1.3.6.1.4.1.2684.1.1.0.19 | Sent when a gatekeeper is registered successfully. |
loginFail
| .1.3.6.1.4.1.2684.1.1.0.2 | Sent when an attempt to log in as an administrator fails via embedded UI, ftp, telnet or web. |
gatekeeperDown
| .1.3.6.1.4.1.2684.1.1.0.20 | Sent when a gatekeeper is specified, but not registered successfully. |
| gatekeeperOff | .1.3.6.1.4.1.2684.1.1.0.21 | Sent when a gatekeeper is disabled. |
ipAddressChange
| .1.3.6.1.4.1.2684.1.1.0.22 | Sent when the system IP address has changed. |
interfaceTypeChange
| .1.3.6.1.4.1.2684.1.1.0.23 | Sent when the system network interface card type has changed. |
lineEnabled
| .1.3.6.1.4.1.2684.1.1.0.24 | Sent when a V.35 or ISDN line has been enabled. |
lineDisabled
| .1.3.6.1.4.1.2684.1.1.0.25 | Sent when a V.35 or ISDN line has been disabled. |
lineUp
| .1.3.6.1.4.1.2684.1.1.0.26 | Sent when a V.35 or ISDN line has been enabled and becomes available for placing a call. |
lineDown
| .1.3.6.1.4.1.2684.1.1.0.27 | Sent when a V.35 or ISDN line has been enabled, but is not working correctly. |
v35PortsEnabled
| .1.3.6.1.4.1.2684.1.1.0.28 | Sent when the V.35 enabled ports setting has changed. |
lineCountChange
| .1.3.6.1.4.1.2684.1.1.0.29 | Sent when the total of available V.35 or ISDN lines has changed. |
| lowBattery | .1.3.6.1.4.1.2684.1.1.0.3 | Sent when the remote has a low battery. |
| mainCameraUp | .1.3.6.1.4.1.2684.1.1.0.30 | Sent when the main camera is working correctly. |
| mainCameraDown | .1.3.6.1.4.1.2684.1.1.0.31 | Sent when the main camera is not working correctly. |
upnpChange
| .1.3.6.1.4.1.2684.1.1.0.32 | Sent when the state of the UPnP device changes. |
percentPacketLossExcessive
| .1.3.6.1.4.1.2684.1.1.0.33 | Sent when the combined tx/rx percentage of packet loss exceeds 1 percent based on 1 minute samples. |
jitterExcessive
| .1.3.6.1.4.1.2684.1.1.0.34 | Sent when the combined tx/rx average jitter exceeds 35 ms based on 1 minute samples. |
latencyExcessive
| .1.3.6.1.4.1.2684.1.1.0.35 | Sent when the combined tx/rx average latency exceeds 150 ms based on 1 minute samples. |
callUp
| .1.3.6.1.4.1.2684.1.1.0.4 | When a call is successfully connected, this notifies the SNMP manager of the far site number. |
callDown
| .1.3.6.1.4.1.2684.1.1.0.5 | When a call is disconnected with normal call clearing, this notifies the SNMP manager of the far site number. |
callFail
| .1.3.6.1.4.1.2684.1.1.0.6 | When a call is disconnected with a cause code other than normal, this notifies the SNMP manager
of the reason. |
userAssist
| .1.3.6.1.4.1.2684.1.1.0.7 | Sent when a user sends a help request to GMS. |
| visualConcertUp | .1.3.6.1.4.1.2684.1.1.0.8 | Sent when a visual concert pod is connected. |
| visualConcertOff | .1.3.6.1.4.1.2684.1.1.0.9 | Sent when a visual concert pod is disconnected. |
polycom 
polycomVSAuthLocation