PKTC-SIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
38
.1.3.6.1.4.1.4491.2.2.2.1.1.1 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk pktcSigDevCodecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PKTC-SIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PKTC-SIG-MIB::pktcSigDevCodecTable'
This table describes the MTA supported codec types.
pktcSigDevCodecEntry row .1.3.6.1.4.1.4491.2.2.2.1.1.1.1
List of supported codecs types for the MTA.
Column Syntax OID
pktcSigDevCodecIndexThe index value which uniquely identifies an entry
in the pktcSigDevCodecTable.
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.4491.2.2.2.1.1.1.1.1
pktcSigDevCodecTypeA codec type supported by this MTA.PktcCodecType
Type Values:
1other
2unknown
3g729
4reserved
5g729E
6pcmu
7g726at32
8g728
9pcma
10g726at16
11g726at24
12g726at40
13ilbc
14bv16
.1.3.6.1.4.1.4491.2.2.2.1.1.1.1.2
pktcSigDevCodecMaxThe maximum number of simultaneous sessions of the
specific codec that the MTA can support
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.4491.2.2.2.1.1.1.1.3
.1.3.6.1.4.1.4491.2.2.2.1.1.11 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk pktcSigCapabilityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PKTC-SIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PKTC-SIG-MIB::pktcSigCapabilityTable'
This table describes the signaling types by this MTA.
pktcSigCapabilityEntry row .1.3.6.1.4.1.4491.2.2.2.1.1.11.1
Entries in pktcMtaDevSigCapabilityTable - List of
supported signaling types, versions and vendor extensions
for this MTA. Each entry in the list provides for one
signaling type and version combination. If the device …
Column Syntax OID
pktcSignalingIndexThe index value which uniquely identifies
an entry in the pktcSigCapabilityTable.
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.4491.2.2.2.1.1.11.1.1
pktcSignalingTypeThe Type identifies the type of signaling
used, this can be NCS, DCS, etc. This value
has to be associated with a single signaling
version - reference pktcMtaDevSignalingVersion.
PktcSigType
Type Values:
1other
2unknown
3ncs
4dcs
.1.3.6.1.4.1.4491.2.2.2.1.1.11.1.2
pktcSignalingVersionProvides the version of the signaling type -
reference pktcSignalingType. Examples
would be 1.0 or 2.33 etc.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.2.2.1.1.11.1.3
pktcSignalingVendorExtensionThe vendor extension allows vendors to
provide a list of additional capabilities,
vendors can decide how to encode these
Extensions, although space separated text is
suggested.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.2.2.1.1.11.1.4
.1.3.6.1.4.1.4491.2.2.2.1.2.1 · 1 row entry · 30 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk pktcNcsEndPntConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PKTC-SIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PKTC-SIG-MIB::pktcNcsEndPntConfigTable'
This table describes the PacketCable EndPoint selected 
signaling type. The number of entries in this table 
represents the number of provisioned end points.
For each conceptual row of pktcSigEndPntConfigTable 
defined, an associated row MUST be defined in one of 
the specific signaling tables such as 
pktcNcsEndPntConfigTable.
pktcNcsEndPntConfigEntry row .1.3.6.1.4.1.4491.2.2.2.1.2.1.1
Entries in pktcNcsEndPntConfigTable - Each entry
describes what signaling type a particular endpoint uses.
Indexes
Column Syntax OID
pktcNcsEndPntConfigCallAgentIdThis object contains a string indicating the call agent
name(e.g.: ca@abc.def.com). The call agent name
after the character '@', MUST be a fully qualified
domain name and MUST have a corresponding
pktcMtaDevCmsFqdn …
OctetStringr/w
Constraints:
range: 3-255
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.1
pktcNcsEndPntConfigCallAgentUdpPortThis object contains the current value of the User
Datagram Protocol (UDP) receive port on which the call
agent will receive NCS signaling from the endpoint.
For each particular end-point, the MTA MUST use
the curre…
Integer32r/w
Constraints:
range: 1025-65535
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.2
pktcNcsEndPntConfigPartialDialTOThis object contains maximum value of the partial
dial time out.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.3
pktcNcsEndPntConfigCriticalDialTOThis object contains the maximum value of the critical
dial time out.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.4
pktcNcsEndPntConfigBusyToneTOThis object contains the default timeout value for busy
tone.The MTA MUST NOT update this object with the
value provided in the NCS Message (if present).
If the value of the object is modified by the
SNMP Management S…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.5
pktcNcsEndPntConfigDialToneTOThis object contains the default timeout value for dial
tone. The MTA MUST NOT update this object with
the value provided in the NCS Message (if present).
If the value of the object is modified by the
SNMP Management …
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.6
pktcNcsEndPntConfigMessageWaitingTOThis object contains the default timeout value for
message waiting indicator The MTA MUST NOT
update this object with the value provided in the NCS
Message (if present). If the value of the object
is modified by the…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.7
pktcNcsEndPntConfigOffHookWarnToneTOThis object contains the default timeout value for the
off hook Warning tone. The MTA MUST NOT update
this object with the value provided in the NCS Message (if
present). If the value of the object is modified
by the S…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.8
pktcNcsEndPntConfigRingingTOThis object contains the default timeout value for
ringing. The MTA MUST NOT update this object with
the value provided in the NCS Message (if present).
If the value of the object is modified by the
SNMP Management S…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.9
pktcNcsEndPntConfigRingBackTOThis object contains the default timeout value for ring
back. The MTA MUST NOT update this object with
the value provided in the NCS Message (if present).
If the value of the object is modified by the
SNMP Managemen…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.10
pktcNcsEndPntConfigReorderToneTOThis object contains the default timeout value for
reorder tone. The MTA MUST NOT update this
object with the value provided in the NCS Message (if
present). If the value of the object is modified
by the SNMP Manag…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.11
pktcNcsEndPntConfigStutterDialToneTOThis object contains the default timeout value for
stutter dial tone. The MTA MUST NOT update this
object with the value provided in the NCS Message (if
present). If the value of the object is modified
by the SNMP Man…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.12
pktcNcsEndPntConfigTSMaxThis object contains the max time in seconds since the
sending of the initial datagram.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.13
pktcNcsEndPntConfigMax1This object contains the suspicious error threshold
for signaling messages.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.14
pktcNcsEndPntConfigMax2This object contains the disconnect error
threshold for signaling messages.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.15
pktcNcsEndPntConfigMax1QEnableThis object enables/disables the Max1 Domain Name
Server (DNS) query operation when Max1 expires.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.16
pktcNcsEndPntConfigMax2QEnableThis object enables/disables the Max2 DNS query
operation when Max2 expires.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.17
pktcNcsEndPntConfigMWDMaximum Waiting Delay (MWD) contains the maximum
number of seconds a MTA waits after a restart.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.18
pktcNcsEndPntConfigTdinitThis object contains the initial number of seconds
a MTA waits after a disconnect.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.19
pktcNcsEndPntConfigTdminThis object contains the minimum number of seconds a
MTA waits after a disconnect.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.20
pktcNcsEndPntConfigTdmaxThis object contains the maximum number of seconds
a MTA waits after a disconnect.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.21
pktcNcsEndPntConfigRtoMaxThis object contains the maximum number of seconds
for the retransmission timer.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.22
pktcNcsEndPntConfigRtoInitThis object contains the initial number of seconds
for the retransmission timer.
millisecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.23
pktcNcsEndPntConfigLongDurationKeepAliveSpecifies a timeout value in minutes for sending
long duration call notification message.
minutesSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.24
pktcNcsEndPntConfigThistTimeout period in seconds before no response is
declared.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.25
pktcNcsEndPntConfigStatusThis object contains the Row Status associated with
the pktcNcsEndPntConfigTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.26
pktcNcsEndPntConfigCallWaitingMaxRepThis object contains the default value of the maximum
number of repetitions of the call waiting tone that the
MTA will play from a single CMS request. The MTA
MUST NOT update this object with the information provided
i…
Integer32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.27
pktcNcsEndPntConfigCallWaitingDelayThis object contains the delay between repetitions
of the call waiting tone that the MTA will play from
a single CMS request.
secondsInteger32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.28
pktcNcsEndPntStatusCallIpAddressThis object contains the IP address of the CMS
currently being used for this endpoint. This IP
address is used to create the appropriate security
association.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.29
pktcNcsEndPntStatusErrorThis object contains the error status for this interface.
The operational state indicates that all operations
necessary to put the line in service have occurred and CMS
has acknowledged the RSIP message successfully.
…
Enumeration
Enumerated Values:
1operational
2noSecurityAssociation
3disconnected
.1.3.6.1.4.1.4491.2.2.2.1.2.1.1.30
.1.3.6.1.4.1.4491.2.2.2.1.3.1 · 1 row entry · 1 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk pktcSigEndPntConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PKTC-SIG-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PKTC-SIG-MIB::pktcSigEndPntConfigTable'
This table describes the PacketCable EndPoint selected
signaling type. The number of entries in this table 
represents the number of provisioned end points.
For each conceptual row of pktcSigEndPntConfigTable 
defined, an associated row MUST be defined in one of 
the specific signaling tables such as 
pktcNcsEndPntConfigTable.
pktcSigEndPntConfigEntry row .1.3.6.1.4.1.4491.2.2.2.1.3.1.1
Entries in pktcSigEndPntConfigTable - Each entry
describes what signaling type a particular endpoint uses.
Indexes
Column Syntax OID
pktcSigEndPntCapabilityIndexThe associated index value in the pktcSigCapablityTable.Integer32r/w
Constraints:
range: 1-16383
.1.3.6.1.4.1.4491.2.2.2.1.3.1.1.1