PDN-SPECTRUMMGMT-MIB Table View

General Configuration of the spectrum management.
This table contains an entry for each technology
managed by this device.

newSpectrumMgmtGeneralConfigEntry row .1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1

An entry with the general spectrum mgmt configuration
parameters for a specific DSL technology.

Indexes

ENTITY-MIBentPhysicalIndex IF-MIBifType

Column	Syntax	OID
newSpectrumMgmtSelection This object is used to Enable or Disable Spectrum Management on DSL interfaces managed by this device. Enabling this object limits the DSL speeds on each port based on line length in order to meet ANSI T1.417 Spectrum…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.1
newSpectrumMgmtMode This object restricts the MAX-ACCESS of the 'Selection' object. Following are the details of each of the values: enableOnly(1) - Indicates that the 'Selection' object IS always '…	Enumeration Enumerated Values: 1 enableOnly 2 disableOnly 3 both	.1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.2
newSpectrumMgmtLoopMeasurementMethod This object indicates the measurement method used in describing the Loop Length of a circuit. Following are the details of each of the options: none(1) - Indicates that the Spectral Compliance …	Enumeration Enumerated Values: 1 none 2 loopLength 3 ewl 4 quadMode	.1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.3
newSpectrumMgmtEWLUnits This object indicates the units of measurement used in describing the Estimated Working Length of a circuit. Following are the details of each of the units: none(1) - Indicates that the Spectral C…	Enumeration Enumerated Values: 1 none 2 feet 3 meters	.1.3.6.1.4.1.1795.2.24.2.6.19.2.1.1.4

The new Spectrum Management Configuration Table
This table is used for configuring spectrum management
objects on any DSL interface.

newSpectrumMgmtConfEntry row .1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1

An entry in the xDSL Spectrum Management
Configuration table.

Note: This entry can be accessed only for ifIndex
values that belong to a physical interface.
e.g. for ifType = 'shdsl' (IANAifTy…

Indexes

IF-MIBifIndex

Column	Syntax	OID
newSpectrumMgmtConfEWL The Equivalent Working Length (EWL). The value selected corresponds to the estimated length of the line in feet - if 'EWLUnits' object is 'feet'. meters - if 'EWLUnits' object is 'meters'. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.1
newSpectrumMgmtConfLoopLength This entry specifies the loop length for the line. The configurable values are short(1), medium(2) and long(3). The 'Loop Length' feature can be used only if the 'shdslSpectrumMgmtSelection' object is Enabled and the '…	Enumerationr/w Enumerated Values: 1 short 2 medium 3 long	.1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.2
newSpectrumMgmtConfQuadMode This entry specifies the quad cable configuration & length for the line. The configurable values are sameQuad(1), segregatedQuadUpto3km(2) and segregatedQuadAbove3km(3). The 'Quad Mode' feature can be used only if t…	Enumerationr/w Enumerated Values: 1 sameQuad 2 segregatedQuadUpto3km 3 segregatedQuadAbove3km	.1.3.6.1.4.1.1795.2.24.2.6.19.2.2.1.3

The Spectrum Management Line Info Table.
This table gives information about the spectrum 
management ranges that are applicable for each port,
based on the spectral requirements for the device.

newSpectrumMgmtLineInfoEntry row .1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1

An entry in the newSpectrumMgmtLineInfoTable table.

Note: This entry can be accessed only for ifIndex values
that belong to a physical interface.
e.g. for ifType = 'adsl'.

Indexes

IF-MIBifIndex

Column	Syntax	OID
newSpectrumMgmtXtucMax1TxRate This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUC in a particular spectral compliance configuration. Some measurement methods may hav…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.1
newSpectrumMgmtXtucMin1TxRate This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUC. The MinTxRate will be upper bounded by 'newSpectrumMgmtXtucMax1TxRate' object. Some measurement met…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.2
newSpectrumMgmtXtucMax2TxRate This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUC in a particular spectral compliance configuration. This object is the Some measur…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.3
newSpectrumMgmtXtucMin2TxRate This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUC. The MinTxRate will be upper bounded by 'newSpectrumMgmtXtucMax1TxRate' object. Some measurement met…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.4
newSpectrumMgmtXtucMaxTxPower The maximum transmit power at the ATUC (in tenth dB). This value will be based on the spectrum management selection.	tenth dBInteger32 Constraints: range: -140-120	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.5
newSpectrumMgmtXturMax1TxRate This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUR in a particular spectral compliance configuration. This object is the Some measur…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.6
newSpectrumMgmtXturMin1TxRate This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUR. The MinTxRate will be upper bounded by 'newSpectrumMgmtXturMax1TxRate' object. Some measurement met…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.7
newSpectrumMgmtXturMax2TxRate This rate will be the max allowed Tx Rate(in bps) for the port based on the Spectrum Management requirements for XTUR in a particular spectral compliance configuration. Some measurement methods may hav…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.8
newSpectrumMgmtXturMin2TxRate This rate will be the min allowed Tx Rate based on the spectrum management requirements for the XTUR. The MinTxRate will be upper bounded by 'newSpectrumMgmtXtucMax1TxRate' object. Some measurement met…	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.9
newSpectrumMgmtXturMaxTxPower The maximum transmit power at the ATUR (in tenth dB). This value will be based on the spectrum management selection.	tenth dBInteger32 Constraints: range: -140-120	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.10
newSpectrumMgmtMinEWL The minimum value (in feet, if 'EWLUnits' is 'feet, or in meters, if 'EWLUnits' is 'meters') that the 'ConfEWL' object can accept. Together with the 'MaxEWL' object, this object indicates the range of EWL when 'EWLUnits…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.11
newSpectrumMgmtMaxEWL The maximum value (in feet, if 'EWLUnits' is 'feet, or in meters, if 'EWLUnits' is 'meters') that the 'ConfEWL' object can accept. Together with the 'MinEWL' object, this object indicates the range of EWL when 'EWLUnits…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.19.2.3.1.12