PDN-SECURITY-MIB Table View

A list of the security manager entries.
In order to add a new Security Manager the devSecurityMgrIpAddress 
object must be created first by setting it to a valid IP Address.

devSecurityMgrEntry row .1.3.6.1.4.1.1795.2.24.2.8.4.1

The SNMP IP Address configuration items.

Indexes

devSecurityMgrIpAddress

Column	Syntax	OID
devSecurityMgrIpAddressobsolete This is used to specify the IP address that identifies the SNMP manager(s) that are authorized to send SNMP messages. An existing Security Manager may be deleted by setting the devSecurityMgrIpAddress ob…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.8.4.1.1
devSecurityMgrAccessobsolete This field is used to specify the access allowed for an authorized NMS when Manager Validation is performed. If the IP address for the NMS sending an SNMP message is on the list of allowed managers, this option along…	Enumerationr/w Enumerated Values: 1 read 2 readWrite	.1.3.6.1.4.1.1795.2.24.2.8.4.1.2

A list of the security manager entries. If an entry is not found
in this table, it is added to the table.

newSecurityMgrEntry row .1.3.6.1.4.1.1795.2.24.2.8.5.1

The SNMP IP Address configuration items.

Indexes

newSecurityMgrIpAddress

Column	Syntax	OID
newSecurityMgrIpAddressobsolete This is used to specify the IP address that identifies the SNMP manager(s) that are authorized to send SNMP messages. This object is the binary AND of SNMP or telnet source IP address and its subnet mask if the subnet m…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.8.5.1.1
newSecurityMgrAccessobsolete This field is used to specify the access allowed for an authorized NMS when Manager Validation is performed. If the IP address for the NMS sending an SNMP message is on the list of allowed managers, this option along…	Enumerationr/w Enumerated Values: 1 read 2 readWrite 3 noAccess 4 telnetNoAccess 5 telnetRead 6 telnetReadWrite	.1.3.6.1.4.1.1795.2.24.2.8.5.1.2
newSecurityMgrSubnetMaskobsolete This object is used to specify the subnet mask	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.8.5.1.3

A list of the security manager entries. If an entry is not found
in this table, it is added to the table.

securityMgrEntry row .1.3.6.1.4.1.1795.2.24.2.8.8.1

The device access security configuration items.

Indexes

securityMgrIpAddress securityMgrSubnetMask

Column	Syntax	OID
securityMgrIpAddressmandatory This is used to specify the IP address that identifies the SNMP manager(s) that are authorized to send SNMP messages.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.8.8.1.1
securityMgrSubnetMaskmandatory This object is used to specify the subnet mask	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.8.8.1.2
securityMgrSnmpAccessmandatory This is used to specify the snmp access to the device.	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite 3 noAccess	.1.3.6.1.4.1.1795.2.24.2.8.8.1.3
securityMgrTelnetAccessmandatory This is used to specify the telnet access to the device.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.1795.2.24.2.8.8.1.4
securityMgrFtpAccessmandatory This is used to specify the ftp access to the device.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.1795.2.24.2.8.8.1.5
securityMgrTrapAccessobsolete This is used to specify the trap access to the device. NOTE: the pdnDevTrapMgrTable should be used instead.	Enumerationr/w Enumerated Values: 1 trapAccess 2 noTrapAccess	.1.3.6.1.4.1.1795.2.24.2.8.8.1.6
securityMgrRowStatusmandatory The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.8.8.1.7