PDN-MPE-DSLAM-SYSTEM-MIB

        The mpe dslam MIB. This MIB is written specifically to
extend entPhysicalTable.

Imported Objects

entPhysicalIndex, entPhysicalEntryENTITY-MIB
pdn-mpePDN-HEADER-MIB
mpeSysObjectIDPDN-MPE-MIB2-MIB
ContactStatePDN-TC
SnmpAdminStringSNMP-FRAMEWORK-MIB
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCESNMPv2-CONF
NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY, Integer32, TimeTicksSNMPv2-SMI
TruthValue, TEXTUAL-CONVENTIONSNMPv2-TC

Type Definitions (2)

Name Base Type Values/Constraints
MpeEntExtAdminStatusup(1), down(2), testing(3)
MpeEntExtOperStatusup(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), reserved1(7)

Objects

mpe-dslam .1.3.6.1.4.1.1795.2.24.12.24
mpeSysDevDslamMIBObjects .1.3.6.1.4.1.1795.2.24.12.24.1
mpeEntExtAlarms .1.3.6.1.4.1.1795.2.24.12.24.1.1
mpeEntExtAlarmTable .1.3.6.1.4.1.1795.2.24.12.24.1.1.1
mpeEntExtAlarmEntry .1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1
mpeEntExtAlarm
.1.3.6.1.4.1.1795.2.24.12.24.1.1.1.1.1
mpeAlarmRelay .1.3.6.1.4.1.1795.2.24.12.24.1.2
mpeAlarmRelayEquipIndex .1.3.6.1.4.1.1795.2.24.12.24.1.2.1
mpeAlarmRelayInputContactState
.1.3.6.1.4.1.1795.2.24.12.24.1.2.2
mpeAlarmRelayTable .1.3.6.1.4.1.1795.2.24.12.24.1.2.3
mpeAlarmRelayEntry
.1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1
mpeAlarmRelayState
.1.3.6.1.4.1.1795.2.24.12.24.1.2.3.1.1
mpeEntExtMibObjects .1.3.6.1.4.1.1795.2.24.12.24.1.3
mpeEntPhysicalExtTable .1.3.6.1.4.1.1795.2.24.12.24.1.3.1
mpeEntPhysicalExtEntry .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1
mpeEntPhysicalExtUpTime
.1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.1
mpeEntPhysicalExtLocation
.1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.2
mpeEntPhysicalExtAdminStatus .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.3
mpeEntPhysicalExtOperStatus .1.3.6.1.4.1.1795.2.24.12.24.1.3.1.1.4
mpeSysDevDslamMIBTraps .1.3.6.1.4.1.1795.2.24.12.24.2
mpeSysDevDslamMIBNotifications .1.3.6.1.4.1.1795.2.24.12.24.2.0
mpeSysDevDslamConformance .1.3.6.1.4.1.1795.2.24.12.24.3
mpeSysDevDslamGroups .1.3.6.1.4.1.1795.2.24.12.24.3.1
mpeSysDevDslamCompliances .1.3.6.1.4.1.1795.2.24.12.24.3.2
mpeSysDevDslamDeprecatedGroup .1.3.6.1.4.1.1795.2.24.12.24.3.3

Notifications/Traps

NameOIDDescription
mpeAlarmRelayInputStateChanged

.1.3.6.1.4.1.1795.2.24.12.24.2.0.26
This trap signifies that the state of the Alarm Relay Input
has changed.
mpeFanEntityModuleFailure

.1.3.6.1.4.1.1795.2.24.12.24.2.0.27
This trap indicates the failure of the fan
module on the device.
mpeFanEntityModuleOperational

.1.3.6.1.4.1.1795.2.24.12.24.2.0.28
This trap indicates the indicates the fan module on the
device is back to operational.
mpePowerSourceAFailure

.1.3.6.1.4.1.1795.2.24.12.24.2.0.29
This trap indicates that power source A
has failed.
mpePowerSourceBFailure

.1.3.6.1.4.1.1795.2.24.12.24.2.0.30
This trap indicates that power source B
has failed.
mpePowerSourceAOperational

.1.3.6.1.4.1.1795.2.24.12.24.2.0.31
This trap indicates that the power source A
is operational. This trap compliments
powerSourceAFailure trap.
mpePowerSourceBOperational

.1.3.6.1.4.1.1795.2.24.12.24.2.0.32
This trap indicates that the power source B
is operational. This trap compliments
powerSourceBFailure trap.
mpeDeviceFailure

.1.3.6.1.4.1.1795.2.24.12.24.2.15
This trap signifies that the sending protocol's
device has failed and the failure was not a result
of a device test. 
Note there are no variable bindings for this trap
mpeDeviceFailureCleared

.1.3.6.1.4.1.1795.2.24.12.24.2.16
This trap signifies that the sending protocol's
device has failed but now it is operational.
Failure was not a result
of a device test.
mpeNonSupportedMCC

.1.3.6.1.4.1.1795.2.24.12.24.2.20
AN has detected MCC firmware release too low to support
this device
mpeNonSupportedChassis

.1.3.6.1.4.1.1795.2.24.12.24.2.21
AN in slot xx has been installed in a chassis that cannot
support one or more of its features.
mpeAlarmRelayInputContactStateChanged


.1.3.6.1.4.1.1795.2.24.12.24.2.22
This trap signifies that the state of the InputContact Alarm
has changed since last time.
NOTE: This object has been deprecated. Please consider using
      the mpeAlarmRelayInputStateChanged notification.
mpeEntPhysicalExtEntityCreated

.1.3.6.1.4.1.1795.2.24.12.24.2.23
This trap signifies that an instance of this entity has
been created in the entPhysicalTable.
          
This trap is generated in addition to the entConfigChange 
notification defined in RFC2737.
mpeEntPhysicalExtEntityDeleted

.1.3.6.1.4.1.1795.2.24.12.24.2.24
This trap signifies that an instance of this entity has
been deleted from the entPhysicalTable.
          
This trap is generated in addition to the entConfigChange
notification defined in RFC2737.
mpeEntPhysicalExtEntityChanged

.1.3.6.1.4.1.1795.2.24.12.24.2.25
This trap signifies that an instance of this entity has
been modified in the entPhysicalTable as a result of a
change in any of the objects in that table.
          
This trap is generated in addition to the entConfigChange 
notification defined in RFC2737.
mpeCcn

.1.3.6.1.4.1.1795.2.24.12.24.2.7
This trap signifies a Configuration change  or 
software upgrade in the xDSL card. This trap 
is of 'warning' class