PDN-MPE-DEVICE-CONTROL-MIB Table View

A table that contains generic information about
Card Control.

mpeDevControlEntry row .1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1

A list of information for device Control.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
mpeDevControlReset Writing the value reset (2) to this object initiates a Hardware power-on reset of the device. Writing the value resetToFactoryDefaults (3) causes the device to re-configure itself with factory defaults. Writing the v…	PDN-TCResetStatesr/w Type Values: 1 noOp 2 reset 3 resetToFactoryDefaults 4 resetToNewActiveConfig	.1.3.6.1.4.1.1795.2.24.12.10.1.1.1.1.1

A table containing information to control device specific Self-Test
operations.

mpeDevControlSelfTestEntry row .1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1

A list of objects for performing Self-Test operations.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
mpeDevControlExtendedSelfTest This object is used to start the extended Power-On Self-Test test. Writing the value enableExtendSelfTestAndReset(2) to this object resets the device and puts it into extended Power-On Self-Test mode. During device i…	Enumerationr/w Enumerated Values: 1 noOp 2 enableExtendSelfTestAndReset	.1.3.6.1.4.1.1795.2.24.12.10.1.1.2.1.1

The Paradyne  FileXfer Client Config Table.

mpeDevFileXferConfigEntry row .1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1

Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
mpeDevFileXferFileName This object contains the name of the filetransfer file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.1
mpeDevFileXferCopyProtocol The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted …	Enumerationr/w Enumerated Values: 1 tftp 2 ftp	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.2
mpeDevFileXferFileType Specifies the type of file your want to transfer.	Enumerationr/w Enumerated Values: 1 firmware 2 config	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.3
mpeDevFileXferServerIpAddress This object contains the file transfer server's IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.4
mpeDevFileXferUserName This object contains the username if a username is needed to login to the server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.5
mpeDevFileXferUserPassword This object contains the password if a password is needed to login to the server. This object will return null on a read operation.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.6
mpeDevFileXferOperation This object contains the operation the file transfer wants to perform.	Enumerationr/w Enumerated Values: 1 get 2 put	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.7
mpeDevFileXferPktsSent This object contains the the number of packets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.8
mpeDevFileXferPktsRecv This object contains the the number of packets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.9
mpeDevFileXferOctetsSent This object contains the the number of octets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.10
mpeDevFileXferOctetsRecv This object contains the the number of octets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.11
mpeDevFileXferOwnerString The entity which currently has the 'ownership' required to invoke the operation on this index.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.12
mpeDevFileXferStatus This object contains the status of the file transfer.	Enumeration Enumerated Values: 1 none 2 success 3 failure 4 inprogress	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.13
mpeDevFileXferErrorStatus This object contains the reason code of the failure determined in mpeDevFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.14
mpeDevFileXferSendEvent This object indicates whether or not to send the mpeDevFileXferEvent event trap .	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.15
mpeDevFileXferRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.16
mpeDevFileXferXferTime This object indicates the elapsed time (in hundredths of a second) of the file transfer.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.17
mpeDevFileXferFileFormat This object contains the file representation type. A file representation type of ascii implies an ASCII, non-print text file. A file representation type of binary implies an binary image file. The default file represen…	Enumerationr/w Enumerated Values: 1 ascii 2 binary	.1.3.6.1.4.1.1795.2.24.12.10.1.2.1.1.18

A list of the current Firmware Releases and their associated
status.  Each Firmware Release will be indexed by a number
from 1 to N.  The user will be able to view the Firmware
Release String and Operational Status of the release (valid
        or invalid) and activate a valid Firmware Release by changing
        the Administration Status to active.

mpeDevFirmwareControlEntry row .1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1

The Device Firmware Release entry.

Indexes

ENTITY-MIBentPhysicalIndex mpeDevFirmwareControlIndex

Column	Syntax	OID
mpeDevFirmwareControlIndex This object is used to index the Firmware table (range 1 to N).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.1
mpeDevFirmwareControlRelease This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be blank.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.2
mpeDevFirmwareControlOperStatus This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware.	Enumeration Enumerated Values: 1 valid 2 invalid 3 unknown	.1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.3
mpeDevFirmwareControlAdminStatus This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to…	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.12.10.1.3.1.1.4

A table that contains configuration information to perform
device specific tests.

mpeDevControlTestEntry row .1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1

A list of configuration information for device specific tests.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
mpeDevControlTestType This object is used to specify the type of the test to start.	Enumerationr/w Enumerated Values: 1 lampTest	.1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.1
mpeDevControlTestStatus The test status on the device. This object indicates whether the indexed test is currently active(1) or inactive(2).	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.2
mpeDevControlTestCmd Used to start or stop the indexed test. When read, the value returned will be the next logical command.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.1795.2.24.12.10.1.4.3.1.3