PDN-ETHER-MIB

         This MIB contains objects that are used to configure
ethernet interfaces.
    
Source file
PDN-ETHER-MIB
Last revised
Identity
pdn-ether
Base OID
1.3.6.1.4.1.1795.2.24.2.18
Imported Objects
MAU-MIB ifJackIndex ifMauEntry ifMauIfIndex ifMauIndex
PDN-HEADER-MIB pdn-common
PDN-TC ManagementType ResetStates SwitchState
RFC1213-MIB ifIndex
SNMPv2-CONF OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the paradyne MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-ETHER-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-ETHER-MIB::pdn-ether'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ETHER-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ETHER-MIB::pdn-ether'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (20)
.1.3.6.1.4.1.1795.2.24.2.18
.1.3.6.1.4.1.1795.2.24.2.18.1
.1.3.6.1.4.1.1795.2.24.2.18.1.1
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.1
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.2
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.3
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.4
Enumeration
.1.3.6.1.4.1.1795.2.24.2.18.1.1.1.1.5
.1.3.6.1.4.1.1795.2.24.2.18.1.2
.1.3.6.1.4.1.1795.2.24.2.18.1.3
.1.3.6.1.4.1.1795.2.24.2.18.1.3.1
.1.3.6.1.4.1.1795.2.24.2.18.1.3.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.18.1.3.1.1.1
.1.3.6.1.4.1.1795.2.24.2.18.1.4
.1.3.6.1.4.1.1795.2.24.2.18.1.4.1
.1.3.6.1.4.1.1795.2.24.2.18.1.4.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.18.1.4.1.1.1
.1.3.6.1.4.1.1795.2.24.2.18.2
Dependencies (13) 6 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANA-MAU-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. MAU-MIBrfc
  9. RFC1155-SMIrfc
  10. PDN-HEADER-MIBparadyne
  11. PDN-TCparadyne
  12. RFC-1212rfc
  13. RFC1213-MIBrfc
  14. PDN-ETHER-MIBparadyneselected
Conformance Groups (3)
This collection of objects is used to set mode
and rate on any ethernet interface.
.1.3.6.1.4.1.1795.2.24.2.18.1.2.1
This object is used to set xover mode
on any ethernet interface.
.1.3.6.1.4.1.1795.2.24.2.18.1.2.2
This object is used to set active jack
on any ethernet interface supporting more
than one jack.
.1.3.6.1.4.1.1795.2.24.2.18.1.2.3