PDN-DSLAM-SYSTEM-MIB Table View

This table shows the most recent 10 logins and all active users 
currently accessing the device. It is indexed by userId
and loginTime.

loginHistTableEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1

This object corresponds to an entry in the login history table.

Indexes

loginUserId loginTime

Column	Syntax	OID
loginUserId This object containes the user login id.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.1
loginTime This object containes the login time in seconds when the login session is established.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.2
loginAccessApp This object describes the access application used by the end user to access the device. This can be done through console, using telnet, modem, web, or using ftp.	Enumeration Enumerated Values: 1 console 2 telnet 3 ftp 4 web 5 modem	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.3
loginAccessHost This object containes the ip address of the network management station when the access application is telnet or ftp. In case of console, this object contains 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.4
loginUserPriv This object containes the access privileges of the user.	Enumeration Enumerated Values: 1 administrator 2 operator	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.5
loginStatus This object indicates whether the user is still accessing the device.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.24.1.1.1.1.6

This table containes the statistics for login failures. It
is indexed by access type i.e console, telnet or ftp.

loginFailureCountTableEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1

This object corresponds to an entry in the login failure count table.

Indexes

loginFailureAccessApp

Column	Syntax	OID
loginFailureAccessApp This object describes the access application used by the end user to access the device. This can be done through console, using telnet or using ftp.	Enumeration Enumerated Values: 1 console 2 telnet 3 ftp	.1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.1
loginFailureCount This object containes the number of unsuccesful logins for console, ftp or telnet.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.24.1.1.2.1.2

This table is used to configure information  for a
particular interface

devIfTableEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1

This object corresponds to an entry in the DevifTable

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
devPacketDiscardPolicy This object corresponds to the policy for packet discards during periods of congestion : mrrp - most recently received packets are discarded. lrrp - least recently received packets are discarded. The default value of th…	Enumerationr/w Enumerated Values: 1 noOp 2 mrrp 3 lrrp	.1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.1
devLinkIntegrity This object corresponds to the enabling or disabling of the ethernet link integrity : enable - enable link integrity disable - disable link integrity none - for interfaces that do not support link integrity The defa…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 none	.1.3.6.1.4.1.1795.2.24.2.24.1.2.2.1.2

This table is used to set the trap destination address
for a particular community.

communityTrapAddressInfoTableEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1

This object corresponds to an entry in the community
trap address info table.

Indexes

trapCommunityName trapDestAndPort

Column	Syntax	OID
trapCommunityName This object corresponds to the name of the SNMP Community.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.1
trapDestAndPort The IP Address and Port of the destination to which a trap must be sent.	SNMPv2-TCTAddress Type Constraints: range: 1..255 Description: Denotes a transport service address. A TAddress value is always interpreted within the context of a TDomain value. Thus, each definition of a TDomain value must be accompanied by a definition of a textual co…	.1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.2
trapsEnable This object corresponds to turning traps on/off for a particular destination. enable (1) - traps will be sent to the specified destination. disable (2)- traps will not be sent to the specified destination. The default …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.3
trapRowStatus This object is used to add or delete a a row from the table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.24.1.2.3.1.4

This table is used to set the various configuration
parameters for a particular community.

entCommunityTableEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1

This object corresponds to an entry in the community
table.

Indexes

entCommunityName

Column	Syntax	OID
entCommunityName This object corresponds to the name of the SNMP Community	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.1
entCommunityType The type of the community readOnly - this community is only allowed to do get's readWrite - this community is allowed to do get's and set's The default value of this object should be 1	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite	.1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.2
entCommunityRowStatus This object is used to add or delete a a row from the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.24.1.2.4.1.3

This table contains the user accounts.

sysDevUserAccountEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1

An entry containing user account information.

Indexes

sysDevUserAccountUserId

Column	Syntax	OID
sysDevUserAccountUserId This object corresponds to the login ID of the user account.	OctetString Constraints: range: 6-15	.1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.1
sysDevUserAccountPrivilege This object corresponds to the access privilege of the user account. 1 = Operator, 2 = Administrator, 3 = maintenance, 4 = provisioning, 5 = manufacturing.	Enumerationr/w Enumerated Values: 1 operator 2 administrator 3 maintenance 4 provisioning 5 manufacturing	.1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.2
sysDevUserAccountUserPassword This object corresponds to the password of the user account.	OctetStringr/w Constraints: range: 6-15	.1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.3
sysDevUserAccountAccessPartition This object corresponds to the access partition of the user account. The default value of this object is 'all'	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.4
sysDevUserAccountRowStatus This object corresponds to create or delete a row in sysDevUserAccountTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.24.1.2.5.1.5

A table that contains configuration information about
IDSL Card.

sysDevIDSLConfigEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1

A list of information for IDSL device Configuration.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
sysDevIDSLConfigPrimaryNetClockMode This object indicates the network clock mode set for the primary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the clock …	PDN-TCIdslClockModer/w Type Values: 1 triState 2 portCardSinkClock 3 portCardDriveClock 4 portCardDriveClockOnboard	.1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.1
sysDevIDSLConfigSecondaryNetClockMode This object indicates the network clock mode set for the secondary network clock. IDSL portcards with a port configured as an NT will be set to portCardDriveClockOnboard(4), both driving the backplane and using the cloc…	PDN-TCIdslClockModer/w Type Values: 1 triState 2 portCardSinkClock 3 portCardDriveClock 4 portCardDriveClockOnboard	.1.3.6.1.4.1.1795.2.24.2.24.1.2.6.1.2

This table contains the user accounts.

sysDevConfigUserAccountEntry row .1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1

An entry containing user account information.

Indexes

sysDevConfigUserAccountIndex

Column	Syntax	OID
sysDevConfigUserAccountIndex The value of this object is an index of the account config table. This object is used by sysDevConfigUserAccountTable to identify the row in the table. When creating new row of this table the value of this object may be…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.1
sysDevConfigUserAccountUserId This object corresponds to the login ID of the user account.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.2
sysDevConfigUserAccountPrivilegedPassword This object corresponds to the access privilege password of the user account. If user is configured with this password in addition to a UserPassword than the user is Administrator. In a case that user is Operator a…	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.3
sysDevConfigUserAccountUserPassword This object corresponds to the password of the user account.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.4
sysDevConfigUserAccountRowStatus This object corresponds to create or delete a row in sysDevConfigUserAccountTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.24.1.2.8.1.5