PDN-CONTROL-MIB Table View

A list of Device tests that may be run.

devControlTestEntry row .1.3.6.1.4.1.1795.2.24.2.10.2.1

The device Test Table.

Indexes

devControlTest

Column	Syntax	OID
devControlTest An index into the test table that indicates which test the row involves.	Enumeration Enumerated Values: 1 lampTest 2 v35DTELpbkTest	.1.3.6.1.4.1.1795.2.24.2.10.2.1.1
devControlTestStatus The test status on the device. This object indicates whether the indexed test is currently active(1) or inactive(2).	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.10.2.1.2
devControlTestCmd Used to start or stop the indexed test. When read, the value returned will be the next logical command.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.1795.2.24.2.10.2.1.3

A list of the current Download Releases and their associated status.
Each Download Release will be indexed by a number from 1 to N.
The user will be able to view the Download Release String and 
Operational Status of the release (valid or invalid) and 
activate a valid Download Release by changing the 
Administration Status to active.

devControlDownLoadEntry row .1.3.6.1.4.1.1795.2.24.2.10.3.1

The Device DownLoad Release entry.

Indexes

devControlDownLoadIndex

Column	Syntax	OID
devControlDownLoadIndex This object is used to index the download table (range 1 to N).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.3.1.1
devControlDownLoadRelease This object indicates the Software Release for this Download. If the Software Download is Operational Status is invalid, the Software Revision Number will be blank.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.1795.2.24.2.10.3.1.2
devControlDownLoadOperStatus This object indicates whether or not the indexed download entry contains a valid(1) or invalid(2) download.	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.1795.2.24.2.10.3.1.3
devControlDownLoadAdminStatus This object indicates whether or not the indexed download entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) …	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.10.3.1.4

A list of objects needed to switch bank
and reset the Service Node (ASN).

devSNSwitchFirmwareEntry row .1.3.6.1.4.1.1795.2.24.2.10.5.1

The Service Node Switch Firmware table.

Indexes

devSNSwitchFirmwareIndex

Column	Syntax	OID
devSNSwitchFirmwareIndex An index into the Service Node switch firmware table that indicates which interface the row involves. This index corresponds to the entityPhysicalIndex of the entity MIB	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.5.1.1
devSNSwitchFirmwareBank Writing the value switch(2) to this object will switch the banks to change the firmware being used on the service node. The firmware from the stand by (not active) bank will be used as the currently running firmware. T…	Enumerationr/w Enumerated Values: 1 noOp 2 switch	.1.3.6.1.4.1.1795.2.24.2.10.5.1.2

The Paradyne  FileXfer Client Config Table.

devFileXferConfigEntry row .1.3.6.1.4.1.1795.2.24.2.10.7.1.1

Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …

Indexes

IF-MIBifIndex

Column	Syntax	OID
devFileXferFileName This object contains the name of the filetransfer file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.1
devFileXferCopyProtocol The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted …	Enumerationr/w Enumerated Values: 1 tftp 2 ftp	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.2
devFileXferFileType Specifies the type of file your want to transfer.	Enumerationr/w Enumerated Values: 1 firmware 2 config	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.3
devFileXferServerIpAddress This object contains the file transfer server's IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.4
devFileXferUserName This object contains the username if a username is needed to login to the server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.5
devFileXferUserPassword This object contains the password if a password is needed to login to the server. This object will return null on a read operation.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.6
devFileXferOperation This object contains the operation the file transfer wants to perform.	Enumerationr/w Enumerated Values: 1 get 2 put	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.7
devFileXferPktsSent This object contains the the number of packets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.8
devFileXferPktsRecv This object contains the the number of packets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.9
devFileXferOctetsSent This object contains the the number of octets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.10
devFileXferOctetsRecv This object contains the the number of octets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.11
devFileXferOwnerString The entity which currently has the 'ownership' required to invoke the operation on this index.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.12
devFileXferStatus This object contains the status of the file transfer.	Enumeration Enumerated Values: 1 none 2 success 3 failure 4 inprogress	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.13
devFileXferErrorStatus This object contains the reason code of the failure determined in devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.14
devFileXferSendEvent This object indicates whether or not to send the devFileXferEvent event trap .	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.15
devFileXferRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.16
devFileXferXferTime This object indicates the elapsed time (in hundredths of a second) of the file transfer.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.1.1.17

The Paradyne  FileXfer Image Client Config Table accessed by session id.

pdnDevFileXferEntry row .1.3.6.1.4.1.1795.2.24.2.10.7.2.1

Use of the File Tranfer MIB could be used with other MIBS in
the following manner:
a) Use another MIB/means to verify available space /make room
for a file to be transfered to this device
b) Use this MIB …

Indexes

pdnDevFileXferSessionID

Column	Syntax	OID
pdnDevFileXferSessionID This object is the session id. This object is used by FileXfer Table to identify the row of this table. When creating the new row in the table the value of this object may be obtained by retreiving the value of pdnDev…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.1
pdnDevFileXferifIndex This object specifies the interface number that corresponds to RFC1213. It this object is not used the value of this object should be zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.2
pdnDevFileXferFileName This object contains the name of the filetransfer file.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.3
pdnDevFileXferCopyProtocol The transfer protocol that should be used to copy the file across the network. If the file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the implementation, and is not restricted …	Enumerationr/w Enumerated Values: 1 tftp 2 ftp	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.4
pdnDevFileXferFileType Specifies the type of file your want to transfer.	Enumerationr/w Enumerated Values: 1 firmware 2 config	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.5
pdnDevFileXferServerIpAddress This object contains the file transfer server's IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.6
pdnDevFileXferUserName This object contains the username if a username is needed to login to the server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.7
pdnDevFileXferUserPassword This object contains the password if a password is needed to login to the server. This object will return null on a read operation.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.8
pdnDevFileXferUserAccount This object contains the name of the the user account information that is stored on ftp server. Server would contain user name and password under this account name. This object will return null on a read operation. Th…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.9
pdnDevFileXferOperation This object contains the operation the file transfer wants to perform.	Enumerationr/w Enumerated Values: 1 get 2 put	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.10
pdnDevFileXferPktsSent This object contains the the number of packets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.11
pdnDevFileXferPktsRecv This object contains the the number of packets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.12
pdnDevFileXferOctetsSent This object contains the the number of octets sent to the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.13
pdnDevFileXferOctetsRecv This object contains the the number of octets received from the server at the time of interrogation.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.14
pdnDevFileXferOwnerString The entity which currently has the 'ownership' required to invoke the operation on this index.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.15
pdnDevFileXferStatus This object contains the status of the file transfer.	Enumeration Enumerated Values: 1 none 2 success 3 failure 4 inprogress	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.16
pdnDevFileXferApply This object is configured to specify if the firmware download will be applied immediatley after file transfer or not.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.17
pdnDevFileXferErrorStatus This object contains the reason code of the failure determined in devFileXferStatus. The reason code are specific to the file transfer protocol. Please refer to the file transfer protocols respective RFC for clarifica…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.18
pdnDevFileXferSendEvent This object indicates whether or not to send the pdnDevFileXferEvent event trap .	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.19
pdnDevFileXferXferTime This object indicates the elapsed time (in hundredths of a second) of the file transfer.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.20
pdnDevFileXferRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.10.7.2.1.21

A list of the current Firmware Releases and their associated
status.  Each Firmware Release will be indexed by a number
from 1 to N.  The user will be able to view the Firmware
Release String and Operational Status of the release (valid
        or invalid) and activate a valid Firmware Release by changing
        the Administration Status to active.

devFirmwareControlEntry row .1.3.6.1.4.1.1795.2.24.2.10.9.1.1

The Device Firmware Release entry.

Indexes

devFirmwareControlIndex

Column	Syntax	OID
devFirmwareControlIndex This object is used to index the Firmware table (range 1 to N).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.1
devFirmwareControlRelease This object indicates the Software Release for this Firmware. If the Software Firmware is Operational Status is invalid, the Software Revision Number will be blank.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.2
devFirmwareControlOperStatus This object indicates whether or not the indexed Firmware entry contains a valid(1) or invalid(2) Firmware.	Enumeration Enumerated Values: 1 valid 2 invalid 3 unknown	.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.3
devFirmwareControlAdminStatus This object indicates whether or not the indexed Firmware entry is active(1) or inactive(2). Writing active(1) will activate that software release and cause the unit to reset (response may timeout). Writing active(1) to…	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.1795.2.24.2.10.9.1.1.4