PDN-CONFIG-MIB Table View

The clock source table.

devConfigClockSrcEntry row .1.3.6.1.4.1.1795.2.24.2.7.3.1.1

An entry in the clock source table.

Indexes

devCfgClkWhichSrc

Column	Syntax	OID
devCfgClkWhichSrcmandatory The clock source to which this entry is applicable.	Enumeration Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.1795.2.24.2.7.3.1.1.1
devCfgClkSourcemandatory This object is used to select the source for the master clock for the device. The source selected provides synchronization for all the timing within the device, and the clocks for all of the external interfaces. …	Enumerationr/w Enumerated Values: 1 internal 2 external 3 interface 4 dbm 5 external2	.1.3.6.1.4.1.1795.2.24.2.7.3.1.1.2
devCfgClkIfIndexmandatory This object is used to select the interface to be used as the source for the master clock for the device, if devCfgClkSource is set to interface(3). The interface selected provides synchronization for all the timing wi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.7.3.1.1.3
devCfgClkRatemandatory This object is used to specify the clock signal rate associated with the external source selected by the devCfgClkSource object.	Enumerationr/w Enumerated Values: 1 rate400Hz 2 rate8KHz 3 rate64KHz 4 rate1544KHz 5 rate2048KHz	.1.3.6.1.4.1.1795.2.24.2.7.3.1.1.4

The Paradyne Card Type Table.

devConfigCardTypeEntry row .1.3.6.1.4.1.1795.2.24.2.7.6.7.1

An entry in the Paradyne Card Type Table.

Indexes

devCfgCardSlot

Column	Syntax	OID
devCfgCardSlotmandatory The slot number which this card occupies in the chassis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.7.6.7.1.1
devCfgCardConfigmandatory The type of card which has been configured for this slot.	Enumeration Enumerated Values: 1 emptySlot 2 unsupportedAPM 3 t1NAM 4 syncDataAPM 5 voiceFxsAPM 6 voiceEmAPM 7 voiceFxoAPM 8 dsxAPM 9 t1NoDsxNAM 10 misconfiguredAPM 11 ocu2APM 12 ocu6APM 13 dce6APM 14 sruAPM 15 ocu4APM 16 pktVoiceAPM 17 acceptingAPM 18 failedAPM 19 dpNAM 20 stNAM 21 ddsNAM 22 dualDsxNniNAM 23 t3NniNAM 24 t3NAM 25 dslNAM	.1.3.6.1.4.1.1795.2.24.2.7.6.7.1.2
devCfgCardActualmandatory The type of card which is present in this slot.	Enumeration Enumerated Values: 1 emptySlot 2 unsupportedAPM 3 t1NAM 4 syncDataAPM 5 voiceFxsAPM 6 voiceEmAPM 7 voiceFxoAPM 8 voiceDsxAPM 9 t1NoDsxNAM 10 misconfigured 11 ocu2APM 12 ocu6APM 13 dce6APM 14 sruAPM 15 ocu4APM 16 pktVoiceAPM 17 acceptingAPM 18 failedAPM 19 dpNAM 20 stNAM 21 ddsNAM 22 dualDsxNniNAM 23 t3NniNAM 24 t3NAM 25 dslNAM	.1.3.6.1.4.1.1795.2.24.2.7.6.7.1.3
devCfgCardActionmandatory Writing accept(2) to this object changes the configured card type to match the type of card currently present in the slot. Reading this object always returns noOp(1).	Enumerationr/w Enumerated Values: 1 noOp 2 accept	.1.3.6.1.4.1.1795.2.24.2.7.6.7.1.4

The Paradyne Configuration Change Key Table. This table
is in place to allow a Network Manager to know when the
configuration on the device changes.  Configuration can
be found in several databases that may each have a
unique access method.  For this reason, the keys are
in the form of a table.

devConfigChangeKeysEntry row .1.3.6.1.4.1.1795.2.24.2.7.9.1.1

An entry in the Paradyne Configuration Change Key Table.

Indexes

devConfigChangeKeysDbType

Column	Syntax	OID
devConfigChangeKeysDbTypemandatory The type of database that is being keyed. If a specific type is not supported by the device, noSuchName should be returned.	Enumeration Enumerated Values: 1 generalConfig 2 rmonAlarm 3 rmonUserHistory 4 routerConfig	.1.3.6.1.4.1.1795.2.24.2.7.9.1.1.1
devConfigChangeKeysDbKeymandatory A unique value that will change each time the database is altered. Effort should be made to increase the number of times the database can change without seeing the same key.	RFC1155-SMIGauge Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.7.9.1.1.2