PDN-BRIDGE-EXT-MIB
This MIB module provides objects that extend the
BRIDGE-MIB.
====================================================
== ==
== Copyright (C) 2005 Zhone Technologies, Inc ==
== ==
====================================================
- Source file
PDN-BRIDGE-EXT-MIB- Last revised
- Identity
pdnBridgeExtMIB- Base OID
1.3.6.1.4.1.1795.2.24.2.58
Imported Objects
| BRIDGE-MIB | dot1dBasePort dot1dBasePortEntry |
| PDN-HEADER-MIB | pdn-common |
| PDN-TC | PdnTestAndIncrDerivedIndexTC (no object page) |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus TestAndIncr |
Net-SNMP examples using the paradyne MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-BRIDGE-EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-BRIDGE-EXT-MIB::pdnBridgeExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-BRIDGE-EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-BRIDGE-EXT-MIB::pdnBridgeExtMIB'
Objects (37)
Showing 37 of 37 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1795.2.24.2.58 |
||
.1.3.6.1.4.1.1795.2.24.2.58.0 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.1.1.6 |
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.3 |
|
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.5 |
|
|
bpsUnsigned32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.2.1.6 |
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.3 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.3.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.3.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.4 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1 |
||
|
Integer32
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.1 |
|
.1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.1.2.4.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.58.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.2.2 |
||
.1.3.6.1.4.1.1795.2.24.2.58.3.2.3 |
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- RFC1155-SMIrfc
- PDN-HEADER-MIBparadyne
- PDN-TCparadyne
- SNMP-FRAMEWORK-MIBrfc
- PDN-BRIDGE-EXT-MIBparadyneselected
Conformance Groups (6)
|
Configures the maximum number of entries allowed in
a bridge port's forwarding database. |
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.1
|
|
|
Objects related to the role attribute on a bridge
port. |
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.2
|
|
|
Provides the ability to configure the forwarding
mode for unknown multicast frames. |
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.3
|
|
|
pdnDot1dTrafficProfileNextIndex pdnDot1dTrafficProfileName pdnDot1dTrafficProfileRowStatus pdnDot1dTrafficProfileNbrRefs pdnDot1dTrafficProfileTrafficClass pdnDot1dTrafficProfileInvIndex pdnDot1dTrafficProfileMappingRowStatus pdnDot1dTrafficProfileMappingIndex
Objects supporting the `basic' framework for
configuring traffic profiles. Objects supporting specific attributes of a profile exist in other groups. |
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4.1
|
|
|
Object to support the configuration of the maximum
rate traffic profile attribute. |
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.4.2
|
|
|
Objects related to QinQ VLAN (802.1ad
|
.1.3.6.1.4.1.1795.2.24.2.58.3.2.1.5
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.1795.2.24.2.58.3.1.1The compliance statement for network elements
implementing extensions to the BRIDGE-MIB.
implementing extensions to the BRIDGE-MIB.
Required groups
| optional | pdnDot1dBasePortMaxFdbEntriesGroup |
This group is only required for implementations that need to allow a user-configurable limit to the maximum number of entries allowed in the Forwarding Database for a bridge port. |
| optional | pdnDot1dBasePortRoleGroup |
This group contains the objects related to the configuration of the bridge port's role attribute. |
| optional | pdnDot1dBasePortUnknownMulticastForwardingModeGroup |
This group is only required for implementations that need to configure the forwarding mode of unknown multicast frames. |
| optional | pdnDot1dTrafficProfileBasicGroup |
This group is only required for implementations that need to support the configuration of traffic profiles. |
| optional | pdnDot1dTrafficProfileMaxRateGroup |
This group is only require for implementations that need to support the configuration of a maximum rate traffic profile attribute. |
| optional | pdnDot1dQinQVlanGroup |
This group is only required for implementations that need to support the QinQ for VLANS (802.1ad). |