OS-ETH-SERV-PROTECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
20

osEthServElpTable

table
.1.3.6.1.4.1.6926.2.33.1 · 1 row entry · 20 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServElpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-PROTECTION-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-PROTECTION-MIB::osEthServElpTable' 
Ethernet Linear Protection (G.8031) per service configuration table.
osEthServElpEntry row .1.3.6.1.4.1.6926.2.33.1.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthElpApsMacAddress
The MAC Address that is used as destination in TX APS PDUs
and also used to trap RX APS PDUs.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6926.2.33.1.1.1
osEthElpTrackCcm
Enable tracking of CCM timeout events. Timeout on the
specified MA (and optionally RMEP) assigned to the service
will be considered as signal failure.
Enumerationr/w
Enumerated Values:
1none
2all
3onlyWorking
4onlyProtection
 .1.3.6.1.4.1.6926.2.33.1.1.2
osEthElpRemoteMepIdWorking
Indicates a remote MEP Id that send CCMs. A timeout
event for that remote MEP will be considered an ELP signal
failure on the WORKING trail
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.33.1.1.3
osEthElpRemoteMepIdProtection
Indicates a remote MEP Id that send CCMs. A timeout
event for that remote MEP will be considered an ELP signal
failure on the PROTECTION trail
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.33.1.1.4
osEthElpHoldOffDelay
Time in milliseconds to hold-off switch over in case
of a failure event.
millisecondsInteger32r/w
Constraints:
range: 0-0
range: 100-60000
 .1.3.6.1.4.1.6926.2.33.1.1.5
osEthElpRevertDelay
Following a recovery from signal failure on the WORKING
trail, time in milliseconds to wait until switching over
to the WORKING trail.
(-1) indicates Do-Not-Revert.
0 indicates revert immediately when recovery is detect…
millisecondsInteger32r/w
Constraints:
range: -1-0
range: 10-86400000
 .1.3.6.1.4.1.6926.2.33.1.1.6
osEthElpCommand
Issue a Command to mainpulate the G.8031 state
machine. Note that command may be rejected if a higher
priority condition is in effect.
This is effectively a write-only field. GET will always
return 'nothing'
ElpCommandr/w
Type Values:
1unknown
2nothing
3clear
4lockout
5forcedSwitch
6manualSwitchWorking
7manualSwitchProtection
8exercise
9freeze
10clearFreeze
 .1.3.6.1.4.1.6926.2.33.1.1.7
osEthElpActiveTrail
Current active trail for the service.
Enumeration
Enumerated Values:
1working
2protection
 .1.3.6.1.4.1.6926.2.33.1.1.20
osEthElpPendingCommand
The pending managment command within the G.8031 logic.
Note that a pending command may be silently cleared by
the G.8031 logic once a higher priority condition is
encountered.
ElpCommand
Type Values:
1unknown
2nothing
3clear
4lockout
5forcedSwitch
6manualSwitchWorking
7manualSwitchProtection
8exercise
9freeze
10clearFreeze
 .1.3.6.1.4.1.6926.2.33.1.1.21
osEthElpApsRxCount
The total number of APS packets received with valid
content.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.33.1.1.22
osEthElpApsTxCount
The total number of APS packets transmitted
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.33.1.1.23
osEthElpFsmStateName
The current state of the G.8031 Final-State-Machine.
This value is a string with the name of the state.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.6926.2.33.1.1.24
osEthElpFarEndFsmStateName
The far-end's last reported state of the G.8031
Final-State-Machine.
This value is a string with the name of the state.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.6926.2.33.1.1.25
osEthElpTrackCcmStateWorking
The CCM tracking state of the WORKING trail.
CcmTrackState
Type Values:
1disabled
2up
3down
 .1.3.6.1.4.1.6926.2.33.1.1.26
osEthElpTrackCcmStateProtection
The CCM tracking state of the PROTECTION trail.
CcmTrackState
Type Values:
1disabled
2up
3down
 .1.3.6.1.4.1.6926.2.33.1.1.27
osEthElpTimeToRevert
Time in seconds until ELP is going to revert from
PROTECTION to WORKING.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6926.2.33.1.1.28
osEthElpWorkingSignalState
The signal state of the WORKING trail.
Based on CCM tracking and port link state.
TrailSignalState
Type Values:
1unknown
2normal
3fail
4degrade
 .1.3.6.1.4.1.6926.2.33.1.1.29
osEthElpProtectionSignalState
The signal state of the PROTECTION trail.
Based on CCM tracking and port link state.
TrailSignalState
Type Values:
1unknown
2normal
3fail
4degrade
 .1.3.6.1.4.1.6926.2.33.1.1.30
osEthElpProtectionIndexName
Service identifier of the row that holds the protection
information for the service
OctetString
Constraints:
range: 1-30
 .1.3.6.1.4.1.6926.2.33.1.1.40
osEthElpAdminStatus
Create - create a protection row in osEthServTable in
which proteection trail properties such as s-vlan and
s-ports should be configured.
delete - delete the protection row in osEthServTable.
enable/disable - Turn Ether…
Enumerationr/w
Enumerated Values:
1unknown
2nothing
3delete
4create
5enable
6disable
 .1.3.6.1.4.1.6926.2.33.1.1.98