OS-ETH-SERV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
18
Rows
18
Columns
218

osEthServTable

table
.1.3.6.1.4.1.6926.2.10.2 · 1 row entry · 34 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServTable' 
Eth UNI per EVC (service) configuration table.
osEthServEntry row .1.3.6.1.4.1.6926.2.10.2.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServId
Service Identifier.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.2.1.1
osEthServNodeType
Type of the service
OS-COMMON-TC-MIBServiceTyper/w
Type Values:
1unknown
2portBasedUni
3vlanBasedUni
4legacyEpLan
5legacyEvpLan
8vlanBasedINni
9portBasedINni
10vlanBasedENni
11portBasedENni
 .1.3.6.1.4.1.6926.2.10.2.1.2
osEthServSVlanId
S-VLAN - Service VLAN (also referred to as Provider VLAN). Obsolete
by osEthServVcSVlanId, deperecated but is not deleted for backward compatibility.
For UNI services this parameter means q-in-q tunneling tag stacking …
r/w .1.3.6.1.4.1.6926.2.10.2.1.4
osEthServCVlans
Set of CE-VLANs: CE-VLAN ID/EVC Map Service Attribute
OS-COMMON-TC-MIBTagListr/w
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.6926.2.10.2.1.5
osEthServIncludesUntagged
True indicates that the service may accept untagged frames from the side
of osEthServCPorts.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.2.1.6
osEthServChangeIngCVlan
Changes ingress CVLan. Deprecated.
r/w .1.3.6.1.4.1.6926.2.10.2.1.7
osEthServSPorts
Set of ports, dedicated to the provider (NNI). In the case
of UNI-N there will be only one port.
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6926.2.10.2.1.9
osEthServCPorts
Set of ports, dedicated to the customer (UNI). In the case
of UNI-C there will be only one port.
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6926.2.10.2.1.10
osEthServClassifyFlowBydeprecated
Multiplex according to DSCP, VPT p_bits, both or the port priority.
The value none(2) means, that any classification will not be done,
and there will be only one flow (entry in osEthServFlowTable)
The rest values mean:…
Enumerationr/w
Enumerated Values:
1unknown
2none
3pcp
4dscp
5pcpdscp
6dscppcp
7portPrio
 .1.3.6.1.4.1.6926.2.10.2.1.11
osEthServLoopback
Option of loopback on s-ports.
reflect - all egress packets are redirected back to egress port.
macSwap - all egress multicast and broadcast packets are redirected back to
egress port as is (no changes).
…
Enumerationr/w
Enumerated Values:
1unknown
2none
3reflect
4macSwap
 .1.3.6.1.4.1.6926.2.10.2.1.12
osEthServLearning
L2 Learning mode of the service.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.2.1.13
osEthServMDLevel
The Maintenance Domain Level. Obsolete by osEthServVcMDLevel, deperecated but
is not deleted for backward compatibility.
OS-COMMON-TC-MIBCfmMDLevelr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.6926.2.10.2.1.15
osEthServMAIndex
Parallel to dot1agCfmMaIndex: a reference to a particular Maintenance
Domain managed object. Obsolete by osEthServVcMAIndex, deperecated but is not deleted
for backward compatibility.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6926.2.10.2.1.16
osEthServMepPortIndex
Parallel to dot1agCfmMepIfIndex: this object is the port index of the
port either a bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached. This index is an index of osPorts.mib…
OS-COMMON-TC-MIBPortIndexOrNoner/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6926.2.10.2.1.18
osEthServMepDirection
Parallel to Dot1agCfmMpDirection: the direction in which the MEP faces
on the Bridge port.
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Message…
IEEE8021-CFM-MIBDot1agCfmMpDirectionr/w
Type Values:
1down
2up
 .1.3.6.1.4.1.6926.2.10.2.1.19
osEthServSpokeVcName
deprecated! Name of virtual-circuit, dedicated to the provider (NNI).
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.2.1.20
osEthServSpokeVcType
deprecated! Type of virtual-circuit.
Enumerationr/w
Enumerated Values:
1unknown
2typeEthernet
3typeVlan
 .1.3.6.1.4.1.6926.2.10.2.1.21
osEthServSpokeVcOuterVlan
deprecated! Indicates if the passenger packet on the vitual-circuit should contain
the outer vlan header or not. For UNI service the outer vlan is the
s-vlan for NNI service the outer vlan is the c-vlan.
Enumerationr/w
Enumerated Values:
1keepVlan
2dropVlan
 .1.3.6.1.4.1.6926.2.10.2.1.22
osEthServCfmPrfl
Profile ID to 802.1ag/ITU 1731 CCM configuration. Points to osEthCfmTable.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.2.1.40
osEthServCcmEnabled
If set to true, the MEP will generate CCM messages.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.2.1.41
osEthServCcmHighestPrDefect
This object reflects dot1agCfmMepHighestPrDefect.
The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state.
IEEE8021-CFM-MIBDot1agCfmHighestDefectPri
Type Values:
0none
1defRDICCM
2defMACstatus
3defRemoteCCM
4defErrorCCM
5defXconCCM
 .1.3.6.1.4.1.6926.2.10.2.1.42
osEthServCcmCoS
The Class of Service of the CCM packets, generated by the service.
OS-COMMON-TC-MIBCoSr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.6926.2.10.2.1.43
osEthServCcmClean
When an agent receives this object with value of true(1) in SNMP SET
operation, it resets values dot1agCfmMepFngState,
dot1agCfmMepHighestPrDefect, dot1agCfmMepDefects, dot1agCfmMepErrorCcmLastFailure,
dot1agCfmMepXconC…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.2.1.44
osEthServEgrMarkSl
Egress mark service level. The value '0' means 'no change'.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.6926.2.10.2.1.45
osEthServDnEgPcpRemap
Define PCP remapping scheme for downstream. Every 4 bits represent a
mapping of the packet's PCP to a new PCP. Least significant bits 0..3
represent the new PCP mapping for packets with original PCP of 0.
Bits 4..7 cont…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.2.1.46
osEthServActionPrfl
Profile ID to extendex actions configuration. Points to osEthActEntry
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.2.1.52
osEthServProtectionRole
Indicate if the table entry relates to the primary service row or to the
protection service row
Enumeration
Enumerated Values:
1primary
2protection
 .1.3.6.1.4.1.6926.2.10.2.1.56
osEthServPVlanId
CLI: p-vlan.
r/w .1.3.6.1.4.1.6926.2.10.2.1.57
osEthServPPortList
CLI: p-ports.
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6926.2.10.2.1.58
osEthServLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.2.1.64
osEthServDescription
Description of the service
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.6926.2.10.2.1.65
osEthServNatPfExternalMode
When interface is used for NAT port-forwarding external management,
the value externalMngIf works as CLI-command 'nat-service'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.2.1.70
osEthServAdminStatus
Values lock(7), unLock(8) and cancelLocking(9) are dedicated to allow to change
critical objects in enabled service. The typical example of critical object
is osEthServNodeType.

When the value lock(7…
Enumerationr/w
Enumerated Values:
1unknown
2nothing
3delete
4create
5enable
6disable
7lock
8unLock
9cancelLocking
10erase
 .1.3.6.1.4.1.6926.2.10.2.1.98
osEthServOperStatus
.
Enumeration
Enumerated Values:
1unknown
2invalid
3absent
5enabled
6disabled
7lockedEnabled
8lockedDisabled
9underEnabling
 .1.3.6.1.4.1.6926.2.10.2.1.99

osEthServClassTable

table
.1.3.6.1.4.1.6926.2.10.3 · 1 row entry · 4 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServClassTable' 
Mapping {service, (dscp|pcp|tag)} -> CoS.
This table allows to map traffic of servies to flows.
Resulting CoS is a second index in OsEthServFlowTable.
osEthServClassEntry row .1.3.6.1.4.1.6926.2.10.3.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServClassMethod
.
Enumeration
Enumerated Values:
1unknown
3pcp
4dscp
8tag
 .1.3.6.1.4.1.6926.2.10.3.1.3
osEthServClassValue
The semantic of this object depends on osEthServClassMethod.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.3.1.4
osEthServClassCoS
Target CoS.
OS-COMMON-TC-MIBCoSr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.6926.2.10.3.1.5
osEthServClassAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.3.1.98

osEthServFlowTable

table
.1.3.6.1.4.1.6926.2.10.10 · 1 row entry · 36 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServFlowTable' 
When Servise Level (CoS) has just been computed, this table allows
to apply it for relevant profiles.
osEthServFlowEntry row .1.3.6.1.4.1.6926.2.10.10.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServFlowId
The value 0 means, that this entry corresponds to the service, not to to any flow.
OS-COMMON-TC-MIBServFlowId
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.10.1.5
osEthServFlowIngBwPrfl
Ingress bandwidth profile applied to C-Ports to ensure rate limiting.
This object points to the osEthBwTable.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.6
osEthServFlowIngBwAccStatus
Status of ingress accounting for the flow
OS-COMMON-TC-MIBBwAccountStatusr/w
Type Values:
1unknown
2clear
3enabled
4disabled
 .1.3.6.1.4.1.6926.2.10.10.1.7
osEthServFlowEgBwPrfl
Egress bandwidth profile applied to S-Ports to ensure rate limiting.
This object points to the osEthBwTable.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.10
osEthServFlowEgBwAccStatus
Status of egress accounting for the flow
OS-COMMON-TC-MIBBwAccountStatusr/w
Type Values:
1unknown
2clear
3enabled
4disabled
 .1.3.6.1.4.1.6926.2.10.10.1.11
osEthServFlowFloodLimPrfl
Profile of Flood limit configuration. Points to osEthFloodPrflTable.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.12
osEthServFlowPerfPrfl
Profile of Performance configuration. Points to osEthPerfTable
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.15
osEthServFlowMepId
MEP Id for Profile of Performance tests of the flow.
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.10.10.1.16
osEthServFlowMepReserve1
For debug and backward compatibility. Must be deleted or replaced in the future.
OS-COMMON-TC-MIBPortIndexOrNoner/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6926.2.10.10.1.17
osEthServFlowPerfDestMacAddress
The Target MAC Address Field to be transmitted: A unicast
destination MAC address.
This address will be used if the value of the column
osEthServFlowPerfDestType is 'macAddress'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6926.2.10.10.1.19
osEthServFlowPerfDestMepId
The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
osEthServFlowPerfDestType is 'sing…
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.10.10.1.20
osEthServFlowPerfDestMepList
List of The Maintenance association End Point Identifiers.
This object will be used if the value of the column
osEthServFlowPerfDestType is 'listOfRMeps'.
OS-COMMON-TC-MIBMepListr/w
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.6926.2.10.10.1.21
osEthServFlowPerfDestType
Describes type of destination used.
Flag indicating if the destination is specified by destination MEP ID, by destination
MAC address or by list of destination MEP IDs.
Enumerationr/w
Enumerated Values:
1singleRMepId
2macAddress
3listOfRMeps
 .1.3.6.1.4.1.6926.2.10.10.1.22
osEthServFlowPerfEnabled
To start/stop Performance test for the flow.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.10.1.23
osEthServFlowRemarkBits
The bit reserved(0) is not used.
Bitsr/w
Enumerated Values:
0reserved
1markDscp
2markPcp
 .1.3.6.1.4.1.6926.2.10.10.1.24
osEthServFlowMarkDscp
.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.10.1.26
osEthServFlowMarkPcp
.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.10.1.27
osEthServFlowRestOfTraffic
Define a flow as 'rest of traffic' one.
Only one flow can have this feature. Thus when the value True is set for any flow, agent
automatically reset this object for all other flows.
For a stream with osEthServFlowId=0, …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.10.1.30
osEthServFlowLbmPrfl
Profile of LBM configuration. Points to osEthLbmTable
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.40
osEthServFlowLbmDestMacAddress
The Target MAC Address Field to be transmitted.
This address will be used if the value of the column
osEthServFlowLbmDestType is 'macAddress'.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6926.2.10.10.1.41
osEthServFlowLbmDestMepId
The Maintenance association End Point Identifier of another
MEP in the same Maintenance Association to which the LBM is
to be sent.
This address will be used if the value of the column
osEthServFlowLbmDestType is 'singl…
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.10.10.1.42
osEthServFlowLbmDestType
Describes type of destination used for LBM.
Enumerationr/w
Enumerated Values:
1singleRMepId
2macAddress
3listOfRMeps
4multicastClass1
5multicastClass2
 .1.3.6.1.4.1.6926.2.10.10.1.43
osEthServFlowLbmEnabled
To start/stop LBM test for the flow.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.10.1.44
osEthServFlowLbmClear
This object when written clears the LBM history and result tables and statistics.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.10.1.45
osEthServFlowUpEgBwPrfl
Profile ID to upstream egress bandwith configuration.
It allows to limit traffic, departing from S-Ports. Points to osEthBwTable.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.55
osEthServFlowUpEgBwAccStatus
Status of upstream egress accounting for the flow. It allows to count
traffic, departing from S-Ports.
OS-COMMON-TC-MIBBwAccountStatusr/w
Type Values:
1unknown
2clear
3enabled
4disabled
 .1.3.6.1.4.1.6926.2.10.10.1.56
osEthServFlowDnEgBwPrfl
Profile ID to downstream egress bandwith configuration.
It allows to limit traffic, departing from C-Ports. Points to osEthBwTable
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.58
osEthServFlowDnEgBwAccStatus
Status of downstream egress accounting for the flow. It allows to count
traffic, departing from C-Ports.
OS-COMMON-TC-MIBBwAccountStatusr/w
Type Values:
1unknown
2clear
3enabled
4disabled
 .1.3.6.1.4.1.6926.2.10.10.1.59
osEthServFlowUpIngFsPrfl
Profile ID to upstream ingress flow sampling configuration.
It allows sampling traffic, arriving to C-Ports. Points to osEthFsTable
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.60
osEthServFlowDnIngFsPrfl
Profile ID to downstream ingress flow sampling configuration.
It allows sampling traffic, arriving to S-Ports. Points to osEthFsTable
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.10.1.61
osEthServFlowUpIngFsSubAgentId
Sub agent ID of upstream ingress flow sampling.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.6926.2.10.10.1.62
osEthServFlowDnIngFsSubAgentId
Sub agent ID of downstream ingress flow sampling.
Integer32r/w
Constraints:
range: -1-9999
 .1.3.6.1.4.1.6926.2.10.10.1.63
osEthServFlowUpstrDEI
Upstream drop eligibility indicator sensitivity.
The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will
have Drop precedence 'yellow'.
The value 'dpRed(3)' means, then frames with DEI bit equal to 1 wil…
Enumerationr/w
Enumerated Values:
1insensitive
2dpYellow
3dpRed
 .1.3.6.1.4.1.6926.2.10.10.1.64
osEthServFlowDownstrDEI
Downstream drop eligibility indicator sensitivity.
The value 'dpYellow(2)' means, then frames with DEI bit equal to 1 will
have Drop precedence 'yellow'.
The value 'dpRed(3)' means, then frames with DEI bit equal to 1 w…
Enumerationr/w
Enumerated Values:
1insensitive
2dpYellow
3dpRed
 .1.3.6.1.4.1.6926.2.10.10.1.65
osEthServFlowHistoryClear
This object when written clears the Delay Measurement history tables
- all rows are deleted. When read the value always returns 'false'.
Writing this value does not change the current stat table
Writing this object a…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.10.1.97
osEthServFlowAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.10.1.98

osEthServVcTable

table
.1.3.6.1.4.1.6926.2.10.11 · 1 row entry · 7 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServVcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServVcTable' 
This table contains all parameters of EVC/OVC. The service must have the same 
values of these objects on every devices.
osEthServVcEntry row .1.3.6.1.4.1.6926.2.10.11.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServVcType
Defines a network role of the service.
This object has no effect on the configuration inside the node.
Enumerationr/w
Enumerated Values:
1unknown
2eLine
3eLan
4eTree
5eAccessLine
6eAccessLan
7eAccessTree
 .1.3.6.1.4.1.6926.2.10.11.1.10
osEthServVcSVlanId
S-VLAN - Service VLAN (also referred to as Provider VLAN).
For UNI services this parameter means q-in-q tunneling tag stacking parameter. For all
types of services it also serves as a prinary VLAN for OAM functions.
Th…
r/w .1.3.6.1.4.1.6926.2.10.11.1.11
osEthServVcMDLevel
The Maintenance Domain Level.
OS-COMMON-TC-MIBCfmMDLevelr/w
Type Constraints:
range: -1..7
 .1.3.6.1.4.1.6926.2.10.11.1.15
osEthServVcMAIndex
Parallel to dot1agCfmMaIndex: a reference to a particular Maintenance
Domain managed object.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6926.2.10.11.1.16
osEthServVcMaTypeName
The type (and thereby format) of the Maintenance Association
Name.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccFormat
 .1.3.6.1.4.1.6926.2.10.11.1.17
osEthServVcMaName
The Short Maintenance Association name. The type/format of
this object is determined by the value of the
osEthServVcMaTypeName object.
Default: name of the Service: osEthServId
OctetStringr/w
Constraints:
range: 1-45
 .1.3.6.1.4.1.6926.2.10.11.1.18
osEthServVcMtuSize
Bind MTU size for the virtual interface.
bytesUnsigned32r/w
Constraints:
range: 64-16000
 .1.3.6.1.4.1.6926.2.10.11.1.19

osEthServFlowTestParamTable

table
.1.3.6.1.4.1.6926.2.10.12 · 1 row entry · 5 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServFlowTestParamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServFlowTestParamTable' 
PM Test parameters
osEthServFlowTestParamEntry row .1.3.6.1.4.1.6926.2.10.12.1
Contains en entry of the table.
Indexes
Column Syntax OID
osEthServFlowTestType
Test type.
Enumeration
Enumerated Values:
1pm
2rfc2544
 .1.3.6.1.4.1.6926.2.10.12.1.1
osEthServFlowTestStartTimeType
This attribute specifies the type of start time of the
PM Test. The start time can immediate, relative, or fixed.

The value of 'immediate' means that Performance Monitor starts immediatly,
when osEthServ…
OS-COMMON-TC-MIBStartTimeTyper/w
Type Values:
1none
2immediate
3relative
4fixed
 .1.3.6.1.4.1.6926.2.10.12.1.2
osEthServFlowTestFixedStartTime
This attribute specifies the fixed start date/time for the
PM Test. This attribute is used only used if
osEthServFlowTestStartTimeType is 'fixed' and is ignored otherwise.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.6926.2.10.12.1.3
osEthServFlowTestRelStartTime
This attribute specifies the relative start time, from the
current system time, for the PM Test. This attribute is used
only if osEthServFlowTestStartTimeType is 'relative' and is
ignored otherwise.
secondsUnsigned32r/w
Constraints:
range: 0-21474836
 .1.3.6.1.4.1.6926.2.10.12.1.4
osEthServFlowTestPeriodicity
This attribute specifies a configurable periodicity time per Test.
The periodicity time can be specified as none
(value of 0) or in relative time (e.g., every given number seconds from the start time).
If the Test is c…
secondsUnsigned32r/w
Constraints:
range: 0-21474836
 .1.3.6.1.4.1.6926.2.10.12.1.5

osEthBwTable

table
.1.3.6.1.4.1.6926.2.10.13 · 1 row entry · 12 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthBwTable' 
This table contains Bandwidth Profiles.
osEthBwEntry row .1.3.6.1.4.1.6926.2.10.13.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthBwId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.13.1.1
osEthBwCIR
Committed Information Rate.
Kbits/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.13.1.2
osEthBwCBS
Committed Burst Size.
KbyteSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.13.1.3
osEthBwEIR
Excess Information Rate.
Kbits/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.13.1.4
osEthBwEBS
Excess Burst Size.
KbyteSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.13.1.5
osEthBwColorMode
CLI commands:
'color-mode (blind|aware|drop-red|blind-and-drop-red|aware-and-drop-red)'
'no color-mode (blind|aware|drop-red|blind-and-drop-red|aware-and-drop-red|)'.
Enumerationr/w
Enumerated Values:
1unknown
2colorBlind
3colorAware
4colorAwareDropRed
5colorBlindDropRed
 .1.3.6.1.4.1.6926.2.10.13.1.10
osEthBwLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.13.1.11
osEthBwRateLimitType
shaper(1) means, that BW limit uses shaper, tc(2) - traffic conditioner.
Enumerationr/w
Enumerated Values:
1shaper
2tc
 .1.3.6.1.4.1.6926.2.10.13.1.12
osEthBwAggregated
Common usage of this profile by several services or and flow.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.13.1.13
osEthBwBuffSize
Queue buffer size. The value '0' means 'default'.
The default value vary for different devices:
OS-V8 has default value 262144 bytes,
OS-V20 has default value 786432 bytes.
BytesUnsigned32r/w
Constraints:
range: 0-0
range: 64-2147483647
 .1.3.6.1.4.1.6926.2.10.13.1.14
osEthBwAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.13.1.98
osEthBwOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.13.1.99

osEthPerfTable

table
.1.3.6.1.4.1.6926.2.10.14 · 1 row entry · 24 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthPerfTable' 
This table contains Performance Profiles.
osEthPerfEntry row .1.3.6.1.4.1.6926.2.10.14.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthPerfId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.14.1.3
osEthPerfType
This object defines a protocol of Frame Delay Measurement.The values mean:
dmm - two-way ETH-DM (ITU-T Y.1731, Clause 8.2.2)
dmmSlow - the same as dmm, but less precise and may be
used when dmm cannot been…
Enumerationr/w
Enumerated Values:
1unknown
2dmm
3dmmSlow
4lbm
5lbmSlow
6lmm
 .1.3.6.1.4.1.6926.2.10.14.1.4
osEthPerfVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted frame.

For more information about VLAN Drop Enable, please check
IEEE 802.1ad.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.14.1.12
osEthPerfHistorySize
.
Unsigned32r/w
Constraints:
range: 2-65535
 .1.3.6.1.4.1.6926.2.10.14.1.17
osEthPerfInterval
Inter-frame delay between transmitting of Loopback frames
to the destination
microsecondsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.6926.2.10.14.1.18
osEthPerfTimeout
Timeout for the arrival of Loopback reply
millisecondsUnsigned32r/w
Constraints:
range: 1-60000
 .1.3.6.1.4.1.6926.2.10.14.1.19
osEthPerfDataLength
Loopback message data length. Used to send Loopback
messages in different lengths
octetsUnsigned32r/w
Constraints:
range: 60-9000
 .1.3.6.1.4.1.6926.2.10.14.1.20
osEthPerfDataFill
.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.6926.2.10.14.1.21
osEthPerfMessages
The number of messages in a burst
packetsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.6926.2.10.14.1.23
osEthPerfBurstInterval
Interval between bursts.
secondsUnsigned32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.6926.2.10.14.1.24
osEthPerfNumberOfBursts
Number of bursts in the test. The value 0 means continuous test.
burstsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6926.2.10.14.1.25
osEthPerfMeasBinsInterval
.
minutesUnsigned32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.6926.2.10.14.1.26
osEthPerfMeasBinsIsAlign
A SOAM implementation should align the start of a measurement interval
on osEthPerfMeasBinsInterval boundary of the local time-of-day clock.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.14.1.27
osEthPerfMeasBinsClockSyncFlag
This attribute specifies whether the clocks for both end
points are synchronized. This attribute controls whether
one-way measurements are computed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.14.1.28
osEthPerfMeasBinsHistorySize
.
Unsigned32r/w
Constraints:
range: 2-192
 .1.3.6.1.4.1.6926.2.10.14.1.29
osEthPerfFdRiseThold
Frame delay (Average of Round Trip Time) Rising threshold.
Value 0 means, that this the agent will not check this tipe of threshold.
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.35
osEthPerfFdFallThold
Frame delay (Average of Round Trip Time) Falling threshold
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.36
osEthPerfDSJittRiseThold
Destination-Source positive jitter Rising threshold.
Value 0 means, that this the agent will not check this tipe of threshold.
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.49
osEthPerfDSJittFallThold
Destination-Source positive jitter Falling threshold.
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.50
osEthPerfSDJittRiseThold
Source-Destination positive jitter Rising threshold.
Value 0 means, that this the agent will not check this tipe of threshold.
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.63
osEthPerfSDJittFallThold
Source-Destination positive jitter Falling threshold.
microsecondsUnsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.6926.2.10.14.1.64
osEthPerfLastError
.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.14.1.65
osEthPerfAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.14.1.98
osEthPerfOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.14.1.99

osEthCfmTable

table
.1.3.6.1.4.1.6926.2.10.15 · 1 row entry · 12 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthCfmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthCfmTable' 
This table contains Connectivity Fault management Profiles.
osEthCfmEntry row .1.3.6.1.4.1.6926.2.10.15.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthCfmId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.15.1.3
osEthCcmLowPrDef
An integer value specifying the lowest priority defect
that is allowed to generate fault alarm.
IEEE8021-CFM-MIBDot1agCfmLowestAlarmPrir/w
Type Values:
1allDef
2macRemErrXcon
3remErrXcon
4errXcon
5xcon
6noXcon
 .1.3.6.1.4.1.6926.2.10.15.1.5
osEthCcmFngAlarmTime
This object reflects dot1agCfmMepFngAlarmTime.
The time that defects must be present before a Fault Alarm is
issued (fngAlarmTime. 20.33.3) (default 2.5s).
Integer32r/w
Constraints:
range: 250-1000
 .1.3.6.1.4.1.6926.2.10.15.1.6
osEthCcmFngResetTime
This object reflects dot1agCfmMepFngResetTime.
The time that defects must be absent before re-enabling a
Fault Alarm (fngResetTime, 20.33.4) (default 10s).
Integer32r/w
Constraints:
range: 250-1000
 .1.3.6.1.4.1.6926.2.10.15.1.7
osEthCcmMaCcmInterval
.
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.6926.2.10.15.1.9
osEthCcmMaCcmRMepAgingTime
This attribute defines a period of time after which an
instance in the dot1agCfmMepDbTable is removed if a valid CCM has not
been received by the local MEP, i.e. Dot1agCfmRemoteMepState is set to
rMEPFailed for the per…
secondsUnsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.6926.2.10.15.1.10
osEthCcmSendPortTlv
Indicates whether a Port Status TLV is included in CCM frame
transmission.

A value of 'true' indicates that the Port Status TLV is to be included.

A value of 'false' indicates that the Po…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.15.1.11
osEthCcmSendIfTlv
Indicates whether a Interface Status TLV is included in CCM frame
transmission.

A value of 'true' indicates that the Interface Status TLV is to be
included.

A value of 'false' indicates …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.15.1.12
osEthCfmLtrPortIdSubtype
Port ID Subtype to encode TLVs in LTR.
CLI command is '[no ]ltr-port-id-subtype (mac|name|alias|)'.
Enumerationr/w
Enumerated Values:
1typeInterfaceAlias
2typePortComponent
3typeMacAddress
4typeNetworkAddress
5typeInterfaceName
6typeAgentCircuitId
7typeLocal
 .1.3.6.1.4.1.6926.2.10.15.1.13
osEthCfmLastError
.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.15.1.70
osEthCfmAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.15.1.98
osEthCfmOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.15.1.99

osEthActTable

table
.1.3.6.1.4.1.6926.2.10.16 · 1 row entry · 7 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthActTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthActTable' 
This table contains Actions Profiles.
osEthActEntry row .1.3.6.1.4.1.6926.2.10.16.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthActId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.16.1.1
osEthActToCPU
.
Enumerationr/w
Enumerated Values:
1unknown
2nothing
3mirror
4redirect
 .1.3.6.1.4.1.6926.2.10.16.1.2
osEthActMirrorPortMode
.
Enumerationr/w
Enumerated Values:
1unknown
2nothing
3ingress
4egress
5both
 .1.3.6.1.4.1.6926.2.10.16.1.5
osEthActMirrorPortIndex
.
OS-COMMON-TC-MIBPortIndexOrNoner/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6926.2.10.16.1.6
osEthActSwapCTag
.
r/w .1.3.6.1.4.1.6926.2.10.16.1.18
osEthActAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.16.1.98
osEthActOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.16.1.99

osEthFloodPrflTable

table
.1.3.6.1.4.1.6926.2.10.17 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthFloodPrflTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthFloodPrflTable' 
This table allows to configure flood limit profiles.
osEthFloodPrflEntry row .1.3.6.1.4.1.6926.2.10.17.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthFloodPrflId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.17.1.1
osEthFloodPrflTypes
Types of traffic to be limited.
Bitsr/w
Enumerated Values:
0unknownUnicast
1multicast
2broadcast
3tcpSyn
 .1.3.6.1.4.1.6926.2.10.17.1.2
osEthFloodPrflRate
Permitted rate in k.
Kbits/secSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.17.1.3
osEthFloodPrflLastError
.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.17.1.70
osEthFloodPrflAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.17.1.98
osEthFloodPrflBwOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.17.1.99

osEthLbmTable

table
.1.3.6.1.4.1.6926.2.10.18 · 1 row entry · 14 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthLbmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthLbmTable' 
This table contains Ethernet Loopback Messages Profiles.
osEthLbmEntry row .1.3.6.1.4.1.6926.2.10.18.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthLbmId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.18.1.3
osEthLbmHistorySize
Bumber of burts, held in the history table.
Unsigned32r/w
Constraints:
range: 2-65535
 .1.3.6.1.4.1.6926.2.10.18.1.17
osEthLbmInterval
Inter-frame delay between transmitting of Loopback frames
to the destination
microsecondsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.6926.2.10.18.1.18
osEthLbmTimeout
Timeout for the arrival of Loopback reply
microsecondsUnsigned32r/w
Constraints:
range: 1-60000
 .1.3.6.1.4.1.6926.2.10.18.1.19
osEthLbmDataLength
Loopback message data length. Used to send Loopback
messages in different lengths
octetsUnsigned32r/w
Constraints:
range: 60-9000
 .1.3.6.1.4.1.6926.2.10.18.1.20
osEthLbmDataFill
mefSoamLbCfgDataPattern in MEF-SOAM-FM-MIB.txt and
MefSoamTcDataPatternType in MEF-SOAM-TC-MIB.txt
Enumerationr/w
Enumerated Values:
1zeroPattern
2onesPattern
 .1.3.6.1.4.1.6926.2.10.18.1.21
osEthLbmMessages
The number of messages in a burst
packetsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.6926.2.10.18.1.23
osEthLbmBurstInterval
Interval between bursts.
secondsUnsigned32r/w
Constraints:
range: 1-86400
 .1.3.6.1.4.1.6926.2.10.18.1.24
osEthLbmNumberOfBursts
Number of bursts in the test. The value 0 means continuous test.
burstsUnsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6926.2.10.18.1.25
osEthLbmLbmHistSize
Number of Lbm groups, held in LbrTable.
Unsigned32r/w
Constraints:
range: 2-65535
 .1.3.6.1.4.1.6926.2.10.18.1.26
osEthLbmLbrPerLbmHistSize
Number of Lbr entries, held in Lbm group in LbrTable.
Unsigned32r/w
Constraints:
range: 2-65535
 .1.3.6.1.4.1.6926.2.10.18.1.27
osEthLbmLastError
.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.18.1.65
osEthLbmAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.18.1.98
osEthLbmOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.18.1.99

osEthServLbrTable

table
.1.3.6.1.4.1.6926.2.10.19 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServLbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServLbrTable' 
Rows in this table are automatically created, a new row for each
response from a loopback request.
osEthServLbrEntry row .1.3.6.1.4.1.6926.2.10.19.1
The conceptual row of osEthServLbrTable.
Indexes
Column Syntax OID
osEthServLbrLbmId
Loopback transaction identifier returned by a previous loopback
message command, indicating which loopback request is returned.
it is an analog of mefSoamLbrMulticastTransId from MEF-SOAM-FM-MIB.txt.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6926.2.10.19.1.1
osEthServLbrPerLbmId
An index to distinguish among multiple LBRs with the same LBR
Transaction Identifier field value. osEthServLbrPerLbmId are assigned
sequentially from 1, in the order that the Loopback Initiator received
the LBR.
it is a…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.6926.2.10.19.1.2
osEthServLbrReplyMac
Source MAC address returned in the LBR Ethernet frame.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6926.2.10.19.1.3
osEthServLbrPort
The port through which it was received.
OS-COMMON-TC-MIBPortIndexOrNone
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6926.2.10.19.1.4
osEthServLbrTime
The time when it was received.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.6926.2.10.19.1.5
osEthServLbrRtt
Round Trip Time.
microsecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.19.1.6

osEthFsTable

table
.1.3.6.1.4.1.6926.2.10.21 · 1 row entry · 8 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthFsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthFsTable' 
This table contains Flow Sampling Profiles.
osEthFsEntry row .1.3.6.1.4.1.6926.2.10.21.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthFsId
.
OS-COMMON-TC-MIBEntityName
Type Constraints:
range: 1..30
 .1.3.6.1.4.1.6926.2.10.21.1.1
osEthFsReceiver
Index of an sFlow receiver. Samplers created from this profile
will send captured samples to this receiver.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.21.1.2
osEthFsChannel
An sFlow channel. Samplers created from this profile
will be attached to that channel.
Enumerationr/w
Enumerated Values:
1ipfix1
2ipfix2
3ipfix3
4ipfix4
 .1.3.6.1.4.1.6926.2.10.21.1.3
osEthFsRateUnit
Specifies the units in which sampling rate is measured
Enumerationr/w
Enumerated Values:
0unknown
1packets
2bytes
3time
 .1.3.6.1.4.1.6926.2.10.21.1.4
osEthFsRateWndSize
Windows size for sampling rate. A single packet will be sampled
from each window.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.21.1.5
osEthFsLastError
Last configuration error description.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.6926.2.10.21.1.6
osEthFsAdminStatus
Allows to create new rows or delete old rows.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.21.1.98
osEthFsOperStatus
.
OS-COMMON-TC-MIBProfileStatus
Type Values:
1unknown
5busy
6free
9underProcessing
 .1.3.6.1.4.1.6926.2.10.21.1.99

osEthTagExcpTable

table
.1.3.6.1.4.1.6926.2.10.24.24 · 1 row entry · 13 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthTagExcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthTagExcpTable' 
tbd.
osEthTagExcpEntry row .1.3.6.1.4.1.6926.2.10.24.24.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthTagExcpCVlan
Must belong to osEthServCVlans.
.1.3.6.1.4.1.6926.2.10.24.24.1.2
osEthTagExcpCPorts
Must belong to osEthServCPorts.
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.6926.2.10.24.24.1.3
osEthTagExcpMAIndex
Parallel to osEthServVcMAIndex: an index of MA.
The value 0 means - don't build MA for the current instance.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6926.2.10.24.24.1.4
osEthTagExcpMepId
.
OS-COMMON-TC-MIBOsCfmMepIdOrZeror/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.6926.2.10.24.24.1.5
osEthTagExcpMepPortIndex
See osEthServMepPortIndex. If osEthTagExcpMepPortIndex equal to 0, then the MEP is
created as inward with 'virtual' port and both send-port-tlv and send-if-tlv are set to 'no'.
OS-COMMON-TC-MIBPortIndexOrNoner/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6926.2.10.24.24.1.6
osEthTagExcpMepDirection
See osEthServMepDirection.
IEEE8021-CFM-MIBDot1agCfmMpDirectionr/w
Type Values:
1down
2up
 .1.3.6.1.4.1.6926.2.10.24.24.1.7
osEthTagExcpCcmEnabled
See osEthServCcmEnabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.24.24.1.8
osEthTagExcpCcmCoS
osEthServCcmCoS.
OS-COMMON-TC-MIBCoSr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.6926.2.10.24.24.1.9
osEthTagExcpCcmClean
See osEthServCcmClean. On GET is returned always false(2).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.24.24.1.10
osEthTagExcpCfmPrfl
See osEthServCfmPrfl.
OS-COMMON-TC-MIBEntityNameOrNoner/w
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.6926.2.10.24.24.1.11
osEthTagExcpMaTypeName
See osEthServVcMaTypeName.
IEEE8021-CFM-MIBDot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccFormat
 .1.3.6.1.4.1.6926.2.10.24.24.1.13
osEthTagExcpMaName
See osEthServVcMaName. By default equals to name of the service.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6926.2.10.24.24.1.14
osEthTagExcpAdminStatus
Allows to create new rows or delete old rows. On GET always returns nothing(2).
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.24.24.1.99

osEthServCountTable

table
.1.3.6.1.4.1.6926.2.10.30 · 1 row entry · 11 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServCountTable' 
This table contains bandwith counters of services and flows. If service/flow
does not use bandwith profile or uses a bandwith profile with disabled
accounting, then all counters in such osEthServCountEntry are zeros.
osEthServCountEntry row .1.3.6.1.4.1.6926.2.10.30.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServFlowCountId
The value 0 means, that this entry corresponds to the service, not to to any flow.
OS-COMMON-TC-MIBServFlowId
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6926.2.10.30.1.1
osEthServFlowCountDir
The direction of banwidth rate limit.
Enumeration
Enumerated Values:
1unknown
2ingress
3egress
4downStreamEgress
5upStreamEgress
 .1.3.6.1.4.1.6926.2.10.30.1.2
osEthServFlowCountStatus
Current status of the entry, describes a set of relevant counters.
Bits
Enumerated Values:
0inactive
1hasAggregateOcts
2hasAggregatePkts
3hasColoredOcts
4hasColoredPkts
 .1.3.6.1.4.1.6926.2.10.30.1.3
osEthServFlowCountAggrOcts
Counter for the total number of bytes (all colors).
If osEthServFlowCountStatus does not contain a hasAggregateOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.9
osEthServFlowCountAggrPkts
Counter for the total number of frames (all colors).
If osEthServFlowCountStatus does not contain a hasAggregatePkts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.10
osEthServFlowCountGreenOcts
Counter for the number of bytes marked with Green conformance level.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.12
osEthServFlowCountGreenPkts
Counter for the number of frames marked with Green conformance leve.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.13
osEthServFlowCountYellowOcts
Counter for the number of bytes marked with Yellow conformance level.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.14
osEthServFlowCountYellowPkts
Counter for the number of frames marked with Yellow conformance level.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.15
osEthServFlowCountRedOcts
Counter for the number of bytes marked with Red conformance level.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.16
osEthServFlowCountRedPkts
Counter for the number of frames marked with Red conformance level.
If osEthServFlowCountStatus does not contain a hasColoredOcts, then
this counter is always equal to zero
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.30.1.17

osEthServTmCountTable

table
.1.3.6.1.4.1.6926.2.10.31.2 · 1 row entry · 7 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServTmCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServTmCountTable' 
This table contains bandwith counters of services and flows.
osEthServTmCountEntry row .1.3.6.1.4.1.6926.2.10.31.2.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServTmCountDir
The direction of banwidth rate limit.
Enumeration
Enumerated Values:
1tmDirUpStreamIngress
2tmDirDownStreamIngress
3tmDirUpStreamEgress
4tmDirDownStreamEgress
 .1.3.6.1.4.1.6926.2.10.31.2.1.2
osEthServTmPort
s-port for upstream or s-port for downstream.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6926.2.10.31.2.1.3
osEthServTmCountStatus
Current status of the entry, describes a set of relevant counters.
Bits
Enumerated Values:
0inactive
1hasPassOcts
2hasPassPkts
3hasDropOcts
4hasDropPkts
 .1.3.6.1.4.1.6926.2.10.31.2.1.5
osEthServTmCountPassOcts
.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.31.2.1.7
osEthServTmCountPassPkts
.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.31.2.1.8
osEthServTmCountDropOcts
.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.31.2.1.9
osEthServTmCountDropPkts
.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6926.2.10.31.2.1.10

osEthServExtTable

table
.1.3.6.1.4.1.6926.2.10.32 · 1 row entry · 10 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServExtTable' 
Extensions of osEthServTable.
osEthServExtEntry row .1.3.6.1.4.1.6926.2.10.32.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServLimitBWTF
Limit rate limit of FPGA tests per flow.
If this paramater equals true(1), then all traffic, generationg by FPGA of test of a flow
will pass the same rate limits, that the data of this flow would pass.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.32.1.2
osEthServFullDownstreamLpbk
Full (egress and ingress) downstream loopback.
CLI command is '[no ]full-downstream-loopback'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.32.1.3
osEthServUpstrDeiRemark
Upstream Drop eligible indicator remarking.
CLI command is '[no ]upstream-dei-remark'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.32.1.4
osEthServEPortsBufPrfl
CLI command is '[no ]e-ports-buffer-prfl (<none|<1-7|>)'.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6926.2.10.32.1.5
osEthServEPortsPrioQuePrfl
CLI command is '[no ]e-ports-priority_queuing-prfl (<1-7>|)'.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6926.2.10.32.1.6
osEthServCMgmtVlan
Customer management vlan.
CLI command is '[no ]c-management-vlan (<1-4095>|)'.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6926.2.10.32.1.14
osEthServOamMepSlmResponder
Allows to MEP of the service to be an SLM responder.
CLI command is '[no ] oam slm-responder'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.32.1.15
osEthServTmDirs
This object allows to select between osEthServCountTable and osEthServTmCountTable for a service.

If osEthServTmDirs exists and the bit tmUpStreamIngress is set,
then use osEthServCountTable with osEthSer…
Bits
Enumerated Values:
0tmUpStreamIngress
1tmDownStreamIngress
2tmUpStreamEgress
3tmDownStreamEgress
 .1.3.6.1.4.1.6926.2.10.32.1.16
osEthServMflgThreshold
The number of repeated re-learnings of the MAC per second, after
which the port is isolated. A value of '0' means that LAN-based
MFLG is disabled for this service
CLI commands:
mac-flapping-loop-guard (threshold (0|<…
Unsigned32r/w
Constraints:
range: 0-0
range: 10-200
 .1.3.6.1.4.1.6926.2.10.32.1.17
osEthServRecoverPorts
When an agent receives this object with the value true(1) in SNMP SET operations,
it immediately recovers all ports of all VIFs of EService that are isolated, for
example, by VLAN-based MFLG.
When SNMP GET/GETNEXT opera…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6926.2.10.32.1.18

osEthServTunnelTable

table
.1.3.6.1.4.1.6926.2.10.34 · 1 row entry · 2 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osEthServTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-ETH-SERV-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-ETH-SERV-MIB::osEthServTunnelTable' 
GRE tunnels of EServices.
osEthServTunnelEntry row .1.3.6.1.4.1.6926.2.10.34.1
Contains an entry of the table.
Indexes
Column Syntax OID
osEthServTunnelName
GRE tunnel Identifier.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.6926.2.10.34.1.2
osEthServTunnelAdminStatus
Allows to create new rows or delete old rows. On GET always returns nothing(2).
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.6926.2.10.34.1.99