OS-DOT1AG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
43

osDot1agMaTable

table
.1.3.6.1.4.1.629.1.50.22.1.2 · 1 row entry · 14 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osDot1agMaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-DOT1AG-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-DOT1AG-MIB::osDot1agMaTable' 
This table allows to configure Maintenance Associations.
osDot1agMaEntry row .1.3.6.1.4.1.629.1.50.22.1.2.1
Contains an entry of the table.
Indexes
Column Syntax OID
osDot1agMaIndex
Index of the MA table.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.629.1.50.22.1.2.1.1
osDot1agMaVlans
CLI command 'vlans LIST-OF-VIDS'
OS-COMMON-TC-MIBTagListr/w
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.629.1.50.22.1.2.1.2
osDot1agMaPrimaryVlanId
Administratively assigned primary VLAN for the MA.
If the value equals to 0, then osDot1agMaOperPrimaryVlanId is selected as
first item from osDot1agMaVlans.
osDot1agMaPrimaryVlanId cannot be reassigned if osDot1agMaF…
r/w .1.3.6.1.4.1.629.1.50.22.1.2.1.3
osDot1agMaOperPrimaryVlanId
The current operational state of the primary VLAN.
.1.3.6.1.4.1.629.1.50.22.1.2.1.4
osDot1agMaFormatName
CLI command name ...
IEEE8021-CFM-MIBDot1agCfmMaintAssocNameTyper/w
Type Values:
1primaryVid
2charString
3unsignedInt16
4rfc2865VpnId
32iccFormat
 .1.3.6.1.4.1.629.1.50.22.1.2.1.5
osDot1agMaName
CLI command name ...
Default equals to osDot1agMaIndex
IEEE8021-CFM-MIBDot1agCfmMaintAssocNamer/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.629.1.50.22.1.2.1.6
osDot1agMaCcmInterval
CLI command: ccm-interval ...
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w
Type Values:
0intervalInvalid
1interval300Hz
2interval10ms
3interval100ms
4interval1s
5interval10s
6interval1min
7interval10min
 .1.3.6.1.4.1.629.1.50.22.1.2.1.7
osDot1agMaRMepAging
CLI command: remote-meps aging <0-86400>.
The value 0 means 'no aging'.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.629.1.50.22.1.2.1.8
osDot1agMaRMeps
CLI command: remote-meps (all|LIST-OF-MEPS)
OS-COMMON-TC-MIBTagListr/w
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.629.1.50.22.1.2.1.9
osDot1agMaIgnoreRMeps
CLI command: ignore-rmeps (all|LIST-OF-MEPS)
OS-COMMON-TC-MIBTagListr/w
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.629.1.50.22.1.2.1.10
osDot1agMaCPorts
CLI command: c-ports PORTS-GROUP
OS-COMMON-TC-MIBPortListr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.629.1.50.22.1.2.1.11
osDot1agMaKeepAlive
CLI command: ccm-keep-alive-number <3-12>
Unsigned32r/w
Constraints:
range: 3-12
 .1.3.6.1.4.1.629.1.50.22.1.2.1.12
osDot1agMaCcmClear
CLI command: ccm-clear.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.2.1.60
osDot1agMaAdminSatus
.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.629.1.50.22.1.2.1.99

osDot1agMepTable

table
.1.3.6.1.4.1.629.1.50.22.1.3 · 1 row entry · 21 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osDot1agMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-DOT1AG-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-DOT1AG-MIB::osDot1agMepTable' 
This table is used to manage Maintenance End Points.
osDot1agMepEntry row .1.3.6.1.4.1.629.1.50.22.1.3.1
Contains an entry of the table.
Indexes
Column Syntax OID
osDot1agMepId
Integer that is unique among all the MEPs in the same MA.
Other definition is: a small integer, unique over a given
Maintenance Association, identifying a specific Maintenance
association End Point (3.19).
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.629.1.50.22.1.3.1.1
osDot1agMepIfIndex
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.629.1.50.22.1.3.1.2
osDot1agMepDirection
The direction in which the MEP faces on the Bridge port.
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity. Also know as 'outward'.
up(2) Sends Continuity Check Messages towards …
IEEE8021-CFM-MIBDot1agCfmMpDirectionr/w
Type Values:
1down
2up
 .1.3.6.1.4.1.629.1.50.22.1.3.1.3
osDot1agMepPrimaryVlanId
CLI command: mep <1-4095> primary-vlan <1-4095>
r/w .1.3.6.1.4.1.629.1.50.22.1.3.1.4
osDot1agMepActive
CLI command: mep <1-4095> activate
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.5
osDot1agMepCciEnabled
CLI command: mep <1-4095> ccm-activate
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.6
osDot1agMepLowPrDef
CLI command: mep <1-4095> lowest-alarm-prio
IEEE8021-CFM-MIBDot1agCfmLowestAlarmPrir/w
Type Values:
1allDef
2macRemErrXcon
3remErrXcon
4errXcon
5xcon
6noXcon
 .1.3.6.1.4.1.629.1.50.22.1.3.1.7
osDot1agMepFngAlarmTime
CLI command: mep <1-4095> fng-alarm-time
SNMPv2-TCTimeIntervalr/w
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.8
osDot1agMepFngResetTime
CLI command: mep <1-4095> fng-reset-time
SNMPv2-TCTimeIntervalr/w
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.9
osDot1agMepPriority
CLI command: mep <1-4095> priority
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.1.50.22.1.3.1.10
osDot1agMepCcmAlarms
CLI command: mep <1-4095> ccm-alarms
all Send nbEthOamCcmAlarm when the MEP fails or recovers
fault Send nbEthOamCcmAlarm when the MEP fails (default - no)
recovery Send nbEthOamCcmAlarm when the MEP recover…
Enumerationr/w
Enumerated Values:
1all
2fault
3recovery
 .1.3.6.1.4.1.629.1.50.22.1.3.1.11
osDot1agMepSendPortTlv
CLI command: mep <1-4095> send-port-tlv
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.12
osDot1agMepSendIfTlv
CLI command: mep <1-4095> send-interface-tlv
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.13
osDot1agMepCcmClear
CLI command: mep <1-4095> clear-ccm-statistics
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.3.1.14
osDot1agMepFngState
.
IEEE8021-CFM-MIBDot1agCfmFngState
Type Values:
1fngReset
2fngDefect
3fngReportDefect
4fngDefectReported
5fngDefectClearing
 .1.3.6.1.4.1.629.1.50.22.1.3.1.25
osDot1agMepMacAddress
.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.629.1.50.22.1.3.1.26
osDot1agMepHighestPrDefect
.
IEEE8021-CFM-MIBDot1agCfmHighestDefectPri
Type Values:
0none
1defRDICCM
2defMACstatus
3defRemoteCCM
4defErrorCCM
5defXconCCM
 .1.3.6.1.4.1.629.1.50.22.1.3.1.27
osDot1agMepDefects
.
IEEE8021-CFM-MIBDot1agCfmMepDefects
Type Values:
0bDefRDICCM
1bDefMACstatus
2bDefRemoteCCM
3bDefErrorCCM
4bDefXconCCM
 .1.3.6.1.4.1.629.1.50.22.1.3.1.28
osDot1agMepCciSentCcms
.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.1.50.22.1.3.1.29
osDot1agMepCciRecvCcms
Total number of Continuity Check messages transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.1.50.22.1.3.1.30
osDot1agMepAdminSatus
Total number of Continuity Check messages received from all remote MEPs.
OS-COMMON-TC-MIBEntryValidatorr/w
Type Values:
1unknown
2nothing
3delete
4create
 .1.3.6.1.4.1.629.1.50.22.1.3.1.99

osDot1agRMepTable

table
.1.3.6.1.4.1.629.1.50.22.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk osDot1agRMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OS-DOT1AG-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-DOT1AG-MIB::osDot1agRMepTable' 
The MEP Database. A database, maintained by every MEP, that
maintains received information about other MEPs in the
Maintenance Domain.
osDot1agRMepEntry row .1.3.6.1.4.1.629.1.50.22.1.4.1
The MEP Database table entry.
Indexes
Column Syntax OID
osDot1agRMepId
Maintenance association End Point Identifier of a remote MEP
whose information from the MEP Database is to be returned.
IEEE8021-CFM-MIBDot1agCfmMepId
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.629.1.50.22.1.4.1.1
osDot1agRMepState
The operational state of the remote MEP IFF State machines.
IEEE8021-CFM-MIBDot1agCfmRemoteMepState
Type Values:
1rMepIdle
2rMepStart
3rMepFailed
4rMepOk
 .1.3.6.1.4.1.629.1.50.22.1.4.1.2
osDot1agRMepFailedOkTime
The time (SysUpTime) at which the IFF Remote MEP state machine
last entered either the RMEP_FAILED or RMEP_OK state.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.629.1.50.22.1.4.1.3
osDot1agRMepMacAddress
The MAC address of the remote MEP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.629.1.50.22.1.4.1.4
osDot1agRMepRdi
State of the RDI bit in the last received CCM (true for
RDI=1), or false if none has been received.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.1.50.22.1.4.1.5
osDot1agRMepPortStatusTlv
An enumerated value of the Port status TLV received in the
last CCM from the remote MEP or the default value
psNoPortStateTLV indicating either no CCM has been received,
or that nor port status TLV was received in the l…
IEEE8021-CFM-MIBDot1agCfmPortStatus
Type Values:
0psNoPortStateTLV
1psBlocked
2psUp
 .1.3.6.1.4.1.629.1.50.22.1.4.1.6
osDot1agRMepInterfaceStatusTlv
An enumerated value of the Interface status TLV received
in the last CCM from the remote MEP or the default value
isNoInterfaceStatus TLV indicating either no CCM has been
received, or that no interface status TLV was r…
IEEE8021-CFM-MIBDot1agCfmInterfaceStatus
Type Values:
0isNoInterfaceStatusTLV
1isUp
2isDown
3isTesting
4isUnknown
5isDormant
6isNotPresent
7isLowerLayerDown
 .1.3.6.1.4.1.629.1.50.22.1.4.1.7
osDot1agRMepRecvCcms
Total number of Continuity Check messages received from this remote MEPs.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.1.50.22.1.4.1.8