ORiNOCO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
57
Rows
57
Columns
489

oriSystemInvMgmtComponentTable

table
.1.3.6.1.4.1.11898.2.1.1.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSystemInvMgmtComponentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSystemInvMgmtComponentTable' 
This table contains the inventory management objects for the 
system components.
oriSystemInvMgmtComponentTableEntry row .1.3.6.1.4.1.11898.2.1.1.1.1.1
This object represents an entry in the system inventory
management component table.
Indexes
Column Syntax OID
oriSystemInvMgmtTableComponentIndex
This object represents the table index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.1
oriSystemInvMgmtTableComponentSerialNumber
This object identifies the system component serial number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.2
oriSystemInvMgmtTableComponentName
This object identifies the system component name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.3
oriSystemInvMgmtTableComponentId
This object identifies the system component identification.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.4
oriSystemInvMgmtTableComponentVariant
This object identifies the system component variant number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.5
oriSystemInvMgmtTableComponentReleaseVersion
This object identifies the system component release version
number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.6
oriSystemInvMgmtTableComponentMajorVersion
This object identifies the system component major version
number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.7
oriSystemInvMgmtTableComponentMinorVersion
This object identifies the system component minor version
number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.1.1.8

oriSystemInvMgmtTableComponentIfTable

table deprecated
.1.3.6.1.4.1.11898.2.1.1.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSystemInvMgmtTableComponentIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSystemInvMgmtTableComponentIfTable' 
This table contains the inventory management objects for the
system components.  This table has been deprecated.
oriSystemInvMgmtTableComponentIfTableEntry row .1.3.6.1.4.1.11898.2.1.1.1.2.1
This object represents an entry in the system component
interface table. This object has been deprecated.
Indexes
Column Syntax OID
oriSystemInvMgmtInterfaceTableIndexdeprecated
This object identifies the interface table index.
This object has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.1
oriSystemInvMgmtInterfaceIddeprecated
This object identifies the system component interface
identification. This object has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.2
oriSystemInvMgmtInterfaceRoledeprecated
This object identifies the system component interface role.
This object has been deprecated.
Enumeration
Enumerated Values:
1actor
2supplier
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.3
oriSystemInvMgmtInterfaceVariantdeprecated
This object identifies the system component's interface
variant number. This object has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.4
oriSystemInvMgmtInterfaceBottomNumberdeprecated
This object identifies the system component's interface
bottom number. This object has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.5
oriSystemInvMgmtInterfaceTopNumberdeprecated
This object identifies the system component's interface
top number. This object has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.1.2.1.6

oriSystemEventLogTable

table
.1.3.6.1.4.1.11898.2.1.1.11 · 1 row entry · 1 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSystemEventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSystemEventLogTable' 
This table contains system event log information that can include
events, errors, and informational messages.  This is a circular
buffer with a limit 100 entries.
oriSystemEventLogTableEntry row .1.3.6.1.4.1.11898.2.1.1.11.1
This object represents an entry in the system event log
table.
Indexes
Column Syntax OID
oriSystemEventLogMessage
This object is used to store system event log information.
This is also used as the index to the table.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.1.11.1.1

oriSystemFeatureTable

table
.1.3.6.1.4.1.11898.2.1.1.19.1 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSystemFeatureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSystemFeatureTable' 
This table contains a list of features that the current image 
supports and indicates if this features is licensed (enabled) or 
not (disabled).  Each row represents a supported and/or licensed 
feature.  Supported indicates if the current image supports the 
image while Licensed indicates that a license is available to use 
this feature.  Based on the license information in this table, 
some MIB groups/subgroups/tables will be enabled or disabled.
oriSystemFeatureTableEntry row .1.3.6.1.4.1.11898.2.1.1.19.1.1
This object represents an entry in the system feature license
table.
Indexes
Column Syntax OID
oriSystemFeatureTableCode
This object identifies the code for the licensed feature and
is used as index for this table.
Enumeration
Enumerated Values:
1bandwidthWiFi
2bandwidthWDS
3bandwidthWORPUp
4bandwidthTurboCell
5bandwidthADSL
6bandwidthCable
7bandwidthPhone
8maxStationsWiFi
9maxLinksWDS
10maxStationsWORP
11maxStationsTurboCell
12maxPPPoESessions
13managementHTTP
14remoteLinkTest
15routingStatic
16routingRIP
17routingOSPF
18spanningTreeProtocol
19linkIntegrity
20dHCPServer
21dHCPRelayAgent
22proxyARP
23filteringStatic
24authRADIUS
25acctRADIUS
26throttlingRADIUS
27filterIP
28ieee802dot1x
29nse
30iAPP
31dNSRedirect
32aOLNATGateway
33hereUare
34spectralink
35vLANTagging
36satMaxUsers
37bandwidthWORPDown
38disableSecWifiIf
39initialProductType
 .1.3.6.1.4.1.11898.2.1.1.19.1.1.1
oriSystemFeatureTableSupported
This object represents the maximum value for the feature as
supported by the current image. For boolean features zero means
not supported, non-zero value means supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.19.1.1.2
oriSystemFeatureTableLicensed
This object represents the maximum value for the feature as
enforced by the license(s). For boolean features zero means
not licensed, non-zero value means licensed.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.1.19.1.1.3
oriSystemFeatureTableDescription
This object represents a textual description for the licensed
feature.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.1.19.1.1.4

oriSyslogHostTable

table
.1.3.6.1.4.1.11898.2.1.1.21.6 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSyslogHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSyslogHostTable' 
This table is used to configure syslog hosts.
oriSyslogHostTableEntry row .1.3.6.1.4.1.11898.2.1.1.21.6.1
This object represents an entry for the syslog host table.
Indexes
Column Syntax OID
oriSyslogHostTableIndex
This object represents an index in the syslog host table.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.11898.2.1.1.21.6.1.1
oriSyslogHostIPAddress
This object represents the IP address of the host running the
syslog daemon.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.1.21.6.1.2
oriSyslogHostComment
This object represents an optional comment for the syslog host, for
example the host name or a reference.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.1.21.6.1.3
oriSyslogHostTableEntryStatus
This object is used to enable, disable, delete, or create an
entry in the syslog host table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.1.21.6.1.4

oriTempLogTable

table
.1.3.6.1.4.1.11898.2.1.1.23.3 · 1 row entry · 1 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriTempLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriTempLogTable' 
This table contains temperature log information. This is a 
circular buffer with a limit 576 entries.
oriTempLogTableEntry row .1.3.6.1.4.1.11898.2.1.1.23.3.1
This object represents an entry in the temperature log
table.
Indexes
Column Syntax OID
oriTempLogMessage
This object is used to store temperature log information.
This is also used as the index to the table.
DisplayString55
Type Constraints:
range: 0..55
 .1.3.6.1.4.1.11898.2.1.1.23.3.1.1

oriWirelessIfPropertiesTable

table
.1.3.6.1.4.1.11898.2.1.2.1.1 · 1 row entry · 40 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWirelessIfPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWirelessIfPropertiesTable' 
This table contains information on the properties and 
capabilities of the wireless interface(s) present in the device.
oriWirelessIfPropertiesEntry row .1.3.6.1.4.1.11898.2.1.2.1.1.1
This object represents the entry in the wireless interface
properties table.
Indexes
Column Syntax OID
oriWirelessIfPropertiesIndex
This object represents a unique value for each interface in the
system and is used as index to this table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.1
oriWirelessIfNetworkName
This object represents the network name (SSID) for this wireless
interface.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.2
oriWirelessIfMediumReservation
This object represents the medium reservation value. The range
for this parameter is 0 - 2347. The medium reservation specifies
the number of octects in a frame above which a RTS/CTS handshake is
performed. The defa…
Integer32r/w
Constraints:
range: 0-2347
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.3
oriWirelessIfInterferenceRobustness
This object enables or disables the interference robustness
feature. The default value for this object should be disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.4
oriWirelessIfDTIMPeriod
This object represents the delivery traffic indication map
period. This is the interval between the transmission of multicast
frames on the wireless inteface. It is expressed in the Beacon
messages. The recommended …
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.5
oriWirelessIfChannel
This object represents the radio frequency channel for this
wireless interface. The default value for the channel is based on the
regulatory domain.
Integer32r/w
Constraints:
range: 1-14
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.6
oriWirelessIfDistancebetweenAPs
This object identifies the distance between access points.
The default value for this parameter should be large.
Enumerationr/w
Enumerated Values:
1large
2medium
3small
4minicell
5microcell
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.7
oriWirelessIfMulticastRate
This object is used to configure the multicast rate, but it is
dependent on the type of wireless NIC. The value of this object is
given in 500 Kbps units. This object can be configured to one of the
values defined by…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.8
oriWirelessIfClosedSystem
This object is used as a flag which identifies whether the
device will accept association requests to this interface, for
client stations configured with a network name of 'ANY'. When
this object is disabled, it wil…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.9
oriWirelessIfAllowedSupportedDataRates
This object reflects the transmit rates supported by the
wireless interface. The values of this object are given in
units of 500 kbps.
Examples for supported data rates:
- 802.11b PHY (DSSS - 2.4 GHz)
- 0 = Aut…
OctetString .1.3.6.1.4.1.11898.2.1.2.1.1.1.10
oriWirelessIfRegulatoryDomainList
This object specifies a single regulatory domain (not a list) which
is supported by the wireless interface.
OctetString .1.3.6.1.4.1.11898.2.1.2.1.1.1.11
oriWirelessIfAllowedChannels
This object reflects the radio frequency channels that the
interface supports.
OctetString .1.3.6.1.4.1.11898.2.1.2.1.1.1.12
oriWirelessIfMACAddressdeprecated
This object represents the MAC address of the wireless interface
present in the device. This object has been deprecated.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.13
oriWirelessIfLoadBalancing
This object is used to configure the load balancing feature
for the wireless interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.14
oriWirelessIfMediumDensityDistribution
This object is used to configure the medium density distribution
feature for the wireless interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.15
oriWirelessIfTxRate
This object is used to configure the transmit rate for unicast
traffic for the wireless interface. This object is dependent on
the transmit rates supported by the wireless interface (refer
to MIB object - oriWireles…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.16
oriWirelessIfAutoChannelSelectStatus
This object is used to configure the automatic frequency channel
feature for the wireless interface. If this object is enabled, the
frequency channel object can not be set, but the frequency channel
selected will be g…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.17
oriWirelessIfBandwidthLimitIn
This object represents the input bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration or by a
license. A written…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.18
oriWirelessIfBandwidthLimitOut
This object represents the output bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration or by a
license. A writte…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.19
oriWirelessIfTurboModeStatus
This object is used to enable or disable turbo mode support. Turbo
mode is only supported for 802.11a PHY (OFDM - 5 GHz) and 802.11g
(ERP - 2.4 GHz) wireless NICs and can only be enabled when super mode
is enabled. Wh…
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.20
oriWirelessIfSupportedOperationalModes
This object provides information on the wireless operational modes
supported by the NIC. Depending on the wireless NIC in the device
different wireless operational modes can be configured.
The possible supported mo…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.21
oriWirelessIfOperationalMode
This object is used to set the wireless NIC Operational mode.
Depending on the wireless NIC in the device different wireless
operational modes can be configured. The supported modes are:
- 802.11b only
- 802.11…
Enumerationr/w
Enumerated Values:
1dot11b-only
2dot11g-only
3dot11bg
4dot11a-only
5dot11g-wifi
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.22
oriWirelessIfPreambleType
This object identifies the wireless interface preamble type
based on the wireless operational mode configured.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.23
oriWirelessIfProtectionMechanismStatus
This object indicates if protection mechanism is enabled or not
based on the wireless operational mode configured.
ObjStatus
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.24
oriWirelessIfSupportedMulticastRates
This object represents the multicast rates supported by the wireless
NIC and the operational mode configured.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.25
oriWirelessIfCapabilities
This object provides information on the wireless capabilities and
features supported by the wireless NIC. Each bit in this object
defines a capability/feature supported by the wireless NIC. If the
bit is set, the ca…
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.26
oriWirelessIfLBTxTimeThreshold
Maximum allowed Tx processing time, in mS, where Tx processing time
is measured from time a packet enters AP from the DS to the time it
successfully leaves the AP's Radio.
Integer32r/w
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.27
oriWirelessIfLBAdjAPTimeDiffThreshold
Maximum allowed difference in mS between adjacent AP's Tx processing
time.
Integer32r/w
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.28
oriWirelessIfACSFrequencyBandScan
This object is used to configure the frequency bands that the auto
channel select algorithm will scan through. Each bit in this object
represents a band or subset of channels in the 5 GHz or 2.4 GHz space.
The value of…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.29
oriWirelessIfSecurityPerSSIDStatus
This object is used to enable or disable the security per SSID
feature. Once this object is enabled, the administrator should use
the Wireless Interface SSID table (oriWirelessIfSSIDTable to
configure the security rela…
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.30
oriWirelessIfDFSStatus
This object is used to enable/disable dynamic frequency selection.
This functionality is dependent on the regulatory domain of the
wireless NIC.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.31
oriWirelessIfAntennadeprecated
This object is used to configure the antenna. The administrator can
select controllable, external, internal, or disable the antenna.
Enumerationr/w
Enumerated Values:
1external
2internal
3controllable
4disabled
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.32
oriWirelessIfTPCMode
This object is used to configure the transmit power control of
the wireless NIC. The transmit power is defined in dBm and can be
configured in increments 3 dBms.
Integer32r/w
Constraints:
range: 0-0
range: 3-3
range: 6-6
range: 9-9
range: 12-12
range: 15-15
range: 18-18
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.33
oriWirelessIfSuperModeStatus
This object is used to enable/disable super mode support. Super Mode
increases the overall throughput of the wireless interface by
implementing fast frame, bursting, and compression. When super mode
is enabled, the ch…
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.34
oriWirelessIfWSSStatus
This object is used for the Wireless System Shutdown feature. This
feature allows an administrator to shut down wireless services to
clients. When this object is set to down wireless client services
will be shutdown/…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.35
oriWirelessIfSupportedAuthenticationModes
This object is used to provide information on the authentication modes
supported by the wireless interface. The possible authentication modes
are:
- none: no authentication mode
- dot1x: 802.1x auth…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.36
oriWirelessIfSupportedCipherModes
This object is used to provide information on the cipher modes/types
supported by the wireless interface. The possible cipher modes/types
are:
- none: no cipher/encryption mode
- wep: wep encry…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.37
oriWirelessIfQoSStatus
This object is used to enable/disable Quality of Service (QoS) on the
wireless interface.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.38
oriWirelessIfQoSMaxMediumThreshold
This object is used to specify the QoS admission control maximum
medium threshold. The maximum medium threshold will apply to all
access categories and is given in a percentage of the medium.
Integer32r/w
Constraints:
range: 50-90
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.39
oriWirelessIfAntennaGain
This object represents Antenna Gain value (including cable loss) that will be
added to the radar detetection parameters.
Integer32r/w
Constraints:
range: 0-35
 .1.3.6.1.4.1.11898.2.1.2.1.1.1.40

oriWirelessIfSecurityTable

table
.1.3.6.1.4.1.11898.2.1.2.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWirelessIfSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWirelessIfSecurityTable' 
This table contains information on the security management objects 
for the wireless interface(s) present in the device.
oriWirelessIfSecurityEntry row .1.3.6.1.4.1.11898.2.1.2.1.2.1
This object represents an entry in the wireless interface
security table.
Indexes
Column Syntax OID
oriWirelessIfSecurityIndex
This object represents a unique value for each interface in the
system and is used as index to this table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.1
oriWirelessIfEncryptionOptions
This object sets the wireless interface's security
capabilities (such as WEP and other standard and proprietary
security features).

AES encryption is only for 802.11a and supports only OCB mode
integrity…
Enumerationr/w
Enumerated Values:
1none
2wep
3rcFour128
4aes
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.2
oriWirelessIfEncryptionStatusdeprecated
This object is used to enable or disable WEP encryption for the
wireless interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.3
oriWirelessIfEncryptionKey1
This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.4
oriWirelessIfEncryptionKey2
This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.5
oriWirelessIfEncryptionKey3
This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.6
oriWirelessIfEncryptionKey4
This object represents Encryption Key 4. This object should be
treated as write-only and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.7
oriWirelessIfEncryptionTxKey
This object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. When this object is
configured to 0, then Encryption Key 1 will be used. When this object
is configured to 1…
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.8
oriWirelessIfDenyNonEncryptedData
This parameter indicates if this interface will accept or deny
non-encrypted data. The default value for this parameters is
disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.9
oriWirelessIfProfileCode
The object represents the profile code of the wirelesss interface.
This information is comprised of a vendor indication and a
capability indication (example: bronze or gold card).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.1.2.1.10

oriWirelessIfSSIDTable

table
.1.3.6.1.4.1.11898.2.1.2.1.3 · 1 row entry · 27 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWirelessIfSSIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWirelessIfSSIDTable' 
This table is used to configure the SSIDs for the wireless interface
in the device.
oriWirelessIfSSIDTableEntry row .1.3.6.1.4.1.11898.2.1.2.1.3.1
This object represents an entry in the respective table.
In this case each table entry represents a VLAN ID.
Indexes
Column Syntax OID
oriWirelessIfSSIDTableIndex
This object represents the index to the SSID Table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.1
oriWirelessIfSSIDTableSSID
This object represents the wireless card SSID string (wireless network
name).
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.2
oriWirelessIfSSIDTableVLANID
This object represents the VLAN Identifier (ID).
VlanIdr/w
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.3
oriWirelessIfSSIDTableStatus
This object represents the wireless SSID table row/entry status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.4
oriWirelessIfSSIDTableSecurityModedeprecated
This object is used to configure the security mode for this table
entry (SSID). This object is deprecated.
Enumerationr/w
Enumerated Values:
1none
2dot1x
3mixed
4wpa
5wpa-psk
6wep
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.5
oriWirelessIfSSIDTableBroadcastSSID
This object is used to enable/disable a broadcast SSID in the SSID
table. A single entry in the SSID table can be enabled to broadcast
SSID in beacon messages.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.6
oriWirelessIfSSIDTableClosedSystem
This object is used to enable/disable the closed system feature
for this table entry (SSID).
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.7
oriWirelessIfSSIDTableSupportedSecurityModesdeprecated
This object is used to provide information on the supported
security modes by the wireless interface(s). The possible security
modes can be:
- None: no security mode enabled.
- dot1x: 802.1x authenticati…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.8
oriWirelessIfSSIDTableEncryptionKey0deprecated
This object represents Encryption Key 0. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.9
oriWirelessIfSSIDTableEncryptionKey1deprecated
This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.10
oriWirelessIfSSIDTableEncryptionKey2deprecated
This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.11
oriWirelessIfSSIDTableEncryptionKey3deprecated
This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.12
oriWirelessIfSSIDTableEncryptionTxKeydeprecated
This object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. The default value
for this object should be key 0. This object is deprecated.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.13
oriWirelessIfSSIDTableEncryptionKeyLengthdeprecated
This object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV). This object is
deprecated.
Enumerationr/w
Enumerated Values:
1sixtyFourBits
2oneHundredTwentyEightBits
3oneHundredFiftyTwoBits
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.14
oriWirelessIfSSIDTableRekeyingInterval
This object represents the encryption rekeying interval. if this
object is configured to zero (0) rekeying is disabled. The units
of this object is seconds.
Integer32r/w
Constraints:
range: 0-0
range: 300-65535
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.15
oriWirelessIfSSIDTablePSKValuedeprecated
The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
authentication suite. In that case, the PMK will obtain its value
from this object.
This object is logically write-only. Reading this variable shall…
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.16
oriWirelessIfSSIDTablePSKPassPhrasedeprecated
The PSK, for when RSN in PSK mode is the selected authentication
suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
manner of setting the PSK uses the password-to-key algorithm defined
in the sta…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.17
oriWirelessIfSSIDTableDenyNonEncryptedDatadeprecated
This object is used to enable/disable deny non encrypted data. This
function is only supported when the security mode is configured to
WEP or Mixed Mode; it is not supported for 802.1x, WPA, and WPA-PSK
security modes.…
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.18
oriWirelessIfSSIDTableSSIDAuthorizationStatus
This object is used to enable or disable SSID Authorization.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.19
oriWirelessIfSSIDTableMACAccessControl
This object is used to enable or disable MAC Access Control
feature/filter for this SSID.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.20
oriWirelessIfSSIDTableRADIUSMACAccessControl
This object is used to enables RADIUS Access Control based on
wireless stations MAC Address.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.21
oriWirelessIfSSIDTableSecurityProfile
This object is used to configure the security profile that will be
used for this SSID. The security profile is defined in the Security
Profile Table in the orinocoSecurity group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.22
oriWirelessIfSSIDTableRADIUSDot1xProfile
This object is used to configure the RADIUS server profile that will be
used for 802.1x authentication for this SSID. The RADIUS profile is
defined in the RADIUS Server Table in the orinocoRADIUSSvrProfile
group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.23
oriWirelessIfSSIDTableRADIUSMACAuthProfile
This object is used to configure the RADIUS server profile that will be
used for MAC based RADIUS authentication for this SSID. The RADIUS
profile is defined in the RADIUS Server Table in the
orinocoRADIUSSvrProfile gr…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.24
oriWirelessIfSSIDTableRADIUSAccountingStatus
This object is used to enable or disable the RADIUS Accounting
service per SSID.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.25
oriWirelessIfSSIDTableRADIUSAccountingProfile
This object is used to configure the RADIUS server profile that will
be used for Accounting for this SSID. The RADIUS profile is defined
in the RADIUS Server Table in the orinocoRADIUSSvrProfile group.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.26
oriWirelessIfSSIDTableQoSPolicy
This object is used to configure the QoS policy that will be
used for this SSID. The QoS profile is defined in the QoS Policy
Table in the orinocoQoS group.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.1.3.1.27

oriEthernetIfConfigTable

table
.1.3.6.1.4.1.11898.2.1.2.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriEthernetIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriEthernetIfConfigTable' 
This table is used to configure the ethernet interface(s) for the 
device.
oriEthernetIfConfigTableEntry row .1.3.6.1.4.1.11898.2.1.2.2.1.1
This object represents an entry in the ethernet interface
configuration table.
Indexes
Column Syntax OID
oriEthernetIfConfigTableIndex
This object represents the index of the ethernet configuraiton
table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.2.1.1.1
oriEthernetIfConfigSettings
This object is used to configure the Ethernet interface's speed.
Some devices support all the configuration options
listed above, while others support only a subset of the
configuration options.
Enumerationr/w
Enumerated Values:
1tenMegabitPerSecHalfDuplex
2tenMegabitPerSecFullDuplex
3tenMegabitPerSecAutoDuplex
4onehundredMegabitPerSecHalfDuplex
5onehundredMegabitPerSecFullDuplex
6autoSpeedHalfDuplex
7autoSpeedAutoDuplex
8onehundredMegabitPerSecAutoDuplex
 .1.3.6.1.4.1.11898.2.1.2.2.1.1.2
oriEthernetIfConfigBandwidthLimitIn
This object represents the input bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration, or by
a license. A writ…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.2.1.1.3
oriEthernetIfConfigBandwidthLimitOut
This object represents the output bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration, or by
a license. A writt…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.2.1.1.4

oriWORPIfConfigTable

table
.1.3.6.1.4.1.11898.2.1.2.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWORPIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWORPIfConfigTable' 
This table is used to configure the mode, time-outs, and protocol 
objects for wireless interface(s) that are configured to run WORP.
oriWORPIfConfigTableEntry row .1.3.6.1.4.1.11898.2.1.2.5.1.1
This object represents an entry in the WORP Interface
Configuration Table.
Indexes
Column Syntax OID
oriWORPIfConfigTableMode
The running mode of this interface:
- If set to disabled, the interface is disabled.
- If set to AP, the interface will run in standard IEEE802.11
mode.
- If set to Base, the interface will be a WORP master
inter…
Enumerationr/w
Enumerated Values:
1disabled
2ap
3base
4satellite
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.1
oriWORPIfConfigTableBaseStationName
The name of the base station. For a base this name will default
to the MIB-II sysName; for a satellite to empty (if not registered
to any base) or the name it is registered to. When a name is set
for a satellite, t…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.2
oriWORPIfConfigTableMaxSatellites
The maximum of remotes allowed on this interface. Please note
that this value will also be limited by the image and the
license.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.3
oriWORPIfConfigTableRegistrationTimeout
This object represents the Timeout of regristration and
authentication, configurable between 1sec and 10sec.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.4
oriWORPIfConfigTableRetries
The number of times a data message will be retransmitted,
configurable between 0 and 10. The value 0 allows unreliable
operation for streaming applications.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.5
oriWORPIfConfigTableNetworkSecret
The NetworkSecret is a string that must be the same for all
stations in a certain network. If a station has another secret
configured as the base, the base will not allow the station to
register. This object should…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.6
oriWORPIfConfigTableNoSleepMode
This object is used to enable or disable sleep mode. If this object
is enabled, a subscriber unit will not go into sleep mode when
they have no data to send.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.2.5.1.1.7

oriWORPIfStatTable

table
.1.3.6.1.4.1.11898.2.1.2.5.2 · 1 row entry · 27 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWORPIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWORPIfStatTable' 
This table is used to monitor the statistics of interfaces that 
run WORP.
oriWORPIfStatTableEntry row .1.3.6.1.4.1.11898.2.1.2.5.2.1
This object represents an entry in the WORP Interface
Statistics Table.
Indexes
Column Syntax OID
oriWORPIfStatTableRemotePartners
The number of remote partners. For a satellite, this parameter
will always be zero or one.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.1
oriWORPIfStatTableAverageLocalSignal
The current signal level calculated over all inbound packets.
This variable indicates the running average of the local signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.2
oriWORPIfStatTableAverageLocalNoise
The current noise level calculated over all inbound packets.
This variable indicates the running average of the local noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.3
oriWORPIfStatTableAverageRemoteSignal
The current remote signal level calculated over the inbound
packets send by this station. This variable indicates the
running average over all registered stations of the remote
signal level using the algorithm (3/4*…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.4
oriWORPIfStatTableAverageRemoteNoise
The current average remote noise level calculated over the
inbound packets send by this station. This variable indicates
the running average over all registered stations of the remote
noise level using the algorithm…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.5
oriWORPIfStatTableBaseStationAnnounces
The number of Base Station Announces Broadcasts (BSAB) sent
(base) or received (satellite) on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.6
oriWORPIfStatTableRegistrationRequests
The number of Registration Requests (RREQ) sent (satellite) or
received (base) on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.7
oriWORPIfStatTableRegistrationRejects
The number of Registration Rejects (RREJ) sent (base) or
received (satellite) on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.8
oriWORPIfStatTableAuthenticationRequests
The number of Authentication Requests (AREQ) sent (satellite) or
received (base) on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.9
oriWORPIfStatTableAuthenticationConfirms
The number of Authentication Confirms (ACFM) sent (base) or
received (satellite) on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.10
oriWORPIfStatTableRegistrationAttempts
The number of times a Registration Attempt has been initiated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.11
oriWORPIfStatTableRegistrationIncompletes
The number of registration attempts that is not completed yet.
For a satellite this parameters will always be zero or one.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.12
oriWORPIfStatTableRegistrationTimeouts
The number of times the registration procedure timed out.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.13
oriWORPIfStatTableRegistrationLastReason
The reason for why the last registration was aborted or failed.
Enumeration
Enumerated Values:
1none
2noMoreAllowed
3incorrectParameter
4roaming
5timeout
6lowQuality
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.14
oriWORPIfStatTablePollData
The number of polls with data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.15
oriWORPIfStatTablePollNoData
The number of polls with no data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.16
oriWORPIfStatTableReplyData
The number of poll replies with data sent (satellite) or
received (base). This counter does not include replies with the
MoreData flag set (see ReplyMoreData).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.17
oriWORPIfStatTableReplyMoreData
The number of poll replies with data sent (satellite) or
received (base) with the MoreData flag set (see also ReplyData).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.18
oriWORPIfStatTableReplyNoData
The number of poll replies with no data sent (satellite) or
received (base).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.19
oriWORPIfStatTableRequestForService
The number of requests for service sent (satellite) or
received (base).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.20
oriWORPIfStatTableSendSuccess
The number of data packets sent that were acknowledged and did
not need a retransmit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.21
oriWORPIfStatTableSendRetries
The number of data packets sent that needed retransmition but
were finally received succesfully by the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.22
oriWORPIfStatTableSendFailures
The number of data packets sent that were (finally) not received
succesfully by the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.23
oriWORPIfStatTableReceiveSuccess
The number of data packets received that were acknowledged and
did not need a retransmit of the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.24
oriWORPIfStatTableReceiveRetries
The number of data packets received that needed retransmition by
the remote partner but were finally received succesfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.25
oriWORPIfStatTableReceiveFailures
The number of data packets that were (finally) not received
succesfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.26
oriWORPIfStatTablePollNoReplies
The number of times a poll was sent but no reply was received.
This object only applies to the base.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.2.1.27

oriWORPIfSatConfigTable

table
.1.3.6.1.4.1.11898.2.1.2.5.3.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWORPIfSatConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWORPIfSatConfigTable' 
This table contains wireless stations statistics.
oriWORPIfSatConfigTableEntry row .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1
This object represents an entry in the WORP Interface
Satellite Statistics Table.
Indexes
Column Syntax OID
oriWORPIfSatConfigTableIndex
This object is used to index the protocol filter table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.1
oriWORPIfSatConfigTableEntryStatus
This object is used to enable, disable, delete, create the
Ethernet protocols in this table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.2
oriWORPIfSatConfigTableMacAddress
This object represents the MAC address of the satellite
for which the statistics are gathered.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.3
oriWORPIfSatConfigTableMinimumBandwidthLimitDownlink
This object represents the minimum input bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. A…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.4
oriWORPIfSatConfigTableMaximumBandwidthLimitDownlink
This object represents the maximum input bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration
or by a license. A…
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.5
oriWORPIfSatConfigTableMinimumBandwidthLimitUplink
This object represents the minimum output bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. …
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.6
oriWORPIfSatConfigTableMaximumBandwidthLimitUplink
This object represents the maximum output bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. …
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.7
oriWORPIfSatConfigTableComment
This object is used for an optional comment associated to the
per Satellite config Table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.8

oriWORPIfSatStatTable

table
.1.3.6.1.4.1.11898.2.1.2.5.3.2.1 · 1 row entry · 20 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWORPIfSatStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWORPIfSatStatTable' 
This table contains wireless stations statistics.
oriWORPIfSatStatTableEntry row .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1
This object represents an entry in the WORP Interface
Satellite Statistics Table.
Indexes
Column Syntax OID
oriWORPIfSatStatTableIndex
This object represents the table index for SatStat Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.1
oriWORPIfSatStatTableMacAddress
This object represents the MAC address of the satellite
for which the statistics are gathered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.2
oriWORPIfSatStatTableAverageLocalSignal
The current signal level calculated over all inbound packets.
This variable indicates the running average of the local signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.3
oriWORPIfSatStatTableAverageLocalNoise
The current noise level calculated over all inbound packets.
This variable indicates the running average of the local noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.4
oriWORPIfSatStatTableAverageRemoteSignal
The current remote signal level calculated over the inbound
packets send by this station. This variable indicates the
running average over all registered stations of the remote
signal level using the algorithm (3/4*…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.5
oriWORPIfSatStatTableAverageRemoteNoise
The current average remote noise level calculated over the
inbound packets send by this station. This variable indicates
the running average over all registered stations of the remote
noise level using the algorithm…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.6
oriWORPIfSatStatTablePollData
The number of polls with data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.7
oriWORPIfSatStatTablePollNoData
The number of polls with no data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.8
oriWORPIfSatStatTableReplyData
The number of poll replies with data sent (satellite) or
received (base). This counter does not include replies with the
MoreData flag set (see ReplyMoreData).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.9
oriWORPIfSatStatTableReplyNoData
The number of poll replies with no data sent (satellite) or
received (base).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.10
oriWORPIfSatStatTableRequestForService
The number of requests for service sent (satellite) or
received (base).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.11
oriWORPIfSatStatTableSendSuccess
The number of data packets sent that were acknowledged and did
not need a retransmit.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.12
oriWORPIfSatStatTableSendRetries
The number of data packets sent that needed retransmition but
were finally received succesfully by the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.13
oriWORPIfSatStatTableSendFailures
The number of data packets sent that were (finally) not received
succesfully by the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.14
oriWORPIfSatStatTableReceiveSuccess
The number of data packets received that were acknowledged and
did not need a retransmit of the remote partner.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.15
oriWORPIfSatStatTableReceiveRetries
The number of data packets received that needed retransmition by
the remote partner but were finally received succesfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.16
oriWORPIfSatStatTableReceiveFailures
The number of data packets that were (finally) not received
succesfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.17
oriWORPIfSatStatTablePollNoReplies
The number of times a poll was sent but no reply was received.
This object only applies to the base.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.18
oriWORPIfSatStatTableLocalTxRate
This object represents the Transmit Data Rate of the BSU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.19
oriWORPIfSatStatTableRemoteTxRate
This object represents the Transmit Data Rate of the SU
which is registered to this SU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.20

oriWORPIfSiteSurveyTable

table
.1.3.6.1.4.1.11898.2.1.2.5.4.2 · 1 row entry · 12 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWORPIfSiteSurveyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWORPIfSiteSurveyTable' 
This table contains the information for the stations currently 
associated with the access point.
oriWORPIfSiteSurveySignalQualityTableEntry row .1.3.6.1.4.1.11898.2.1.2.5.4.2.1
This object represents the entry in the Remote Link Test table.
Indexes
Column Syntax OID
oriWORPIfSiteSurveyTableIndex
This object represents a unique entry in the table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.1
oriWORPIfSiteSurveyBaseMACAddress
This object represents the MAC address of the base unit being tested
with.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.2
oriWORPIfSiteSurveyBaseName
This object identifies the name of the base unit being tested with..
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.3
oriWORPIfSiteSurveyMaxSatAllowed
This object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.4
oriWORPIfSiteSurveyNumSatRegistered
This object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.5
oriWORPIfSiteSurveyCurrentSatRegistered
This object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.6
oriWORPIfSiteSurveyLocalSignalLevel
The current signal level (in dB) for the Site Survey from this
station. This object indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.7
oriWORPIfSiteSurveyLocalNoiseLevel
The current noise level (in dB) for the Site Survey to this station.
This object indicates the running average of the local noise
level.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.8
oriWORPIfSiteSurveyLocalSNR
The current signal to noise ratio for the Site Survey to this
station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.9
oriWORPIfSiteSurveyRemoteSignalLevel
The current signal level (in dB) for the Site Survey from the base
with which the current satellite is registered. This object indicates
the running average of the local signal level using the
algorithm (3/4*oldvalu…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.10
oriWORPIfSiteSurveyRemoteNoiseLevel
The current noise level (in dB) for the Site Survey from the base
with which the current satellite is registered.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.11
oriWORPIfSiteSurveyRemoteSNR
The current SNR (in dB) for the Site Survey from the base
with which the current satellite is registered.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.12

oriNetworkIPConfigTable

table
.1.3.6.1.4.1.11898.2.1.3.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriNetworkIPConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriNetworkIPConfigTable' 
This table contains the Network IP configuration for the network 
interface(s) of the device.  For bridge mode, only the address 
assigned to the Ethernet interface (index 1) will be used.
oriNetworkIPConfigTableEntry row .1.3.6.1.4.1.11898.2.1.3.1.1.1
This object represents an entry for the network IP configuration
for each interface in the system.
Indexes
Column Syntax OID
oriNetworkIPConfigTableIndex
This object represents an index or interface number in the
network IP configuration table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.3.1.1.1.1
oriNetworkIPConfigIPAddress
This object represents the IP Address of the network interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.3.1.1.1.2
oriNetworkIPConfigSubnetMask
This object represents the subnet mask of the network interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.3.1.1.1.3

oriSNMPAccessTable

table
.1.3.6.1.4.1.11898.2.1.4.4 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSNMPAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSNMPAccessTable' 
This table is used configure management stations that are
authorized to manage the device.  This table applies to the 
supported management services/interfaces (SNMP, HTTP, and Telnet).
This table is limited to 20 entries.
oriSNMPAccessTableEntry row .1.3.6.1.4.1.11898.2.1.4.4.1
This object identifies an entry in the Management IP Access
Table.
Indexes
Column Syntax OID
oriSNMPAccessTableIndex
This object represents the index for the Management IP Access
Table.
Integer32
Constraints:
range: 0-20
 .1.3.6.1.4.1.11898.2.1.4.4.1.1
oriSNMPAccessTableIPAddress
This object represents the IP address of the management station
authorized to manage the device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.4.4.1.2
oriSNMPAccessTableIPMask
This object represents the IP subnet mask. This object can
be used to grant access to a complete subnet.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.4.4.1.3
oriSNMPAccessTableInterfaceBitmask
This object is used to control the interface access for each
table entry in the Management IP Access Table.
InterfaceBitmaskr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11898.2.1.4.4.1.4
oriSNMPAccessTableComment
This object is used for an optional comment associated to the
Management IP Access Table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.4.4.1.5
oriSNMPAccessTableEntryStatus
This object is used to enable, disable, delete, or create an
entry in the Management IP Access Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.4.4.1.6

oriSNMPTrapHostTable

table
.1.3.6.1.4.1.11898.2.1.4.5 · 1 row entry · 5 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSNMPTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSNMPTrapHostTable' 
This table contains the information regarding the trap host that 
will receive SNMP traps sent by the device.  This table is limited
10 entries.
oriSNMPTrapHostTableEntry row .1.3.6.1.4.1.11898.2.1.4.5.1
This object identifies an entry in the SNMP Trap Host Table.
Indexes
Column Syntax OID
oriSNMPTrapHostTableIndex
This object is used as an index for the SNMP Trap Host Table.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.11898.2.1.4.5.1.1
oriSNMPTrapHostTableIPAddress
This object represents the IP address of the management station
that will receive SNMP Traps from the device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.4.5.1.2
oriSNMPTrapHostTablePassword
This object represents the password that is sent with the SNMP
trap messages to allow the host to accept or reject the traps.
The trap host will only accept SNMP traps if this password matches
the host's password. T…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.4.5.1.3
oriSNMPTrapHostTableComment
This object is used for an optional comment associated to the
SNMP Trap Host Table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.4.5.1.4
oriSNMPTrapHostTableEntryStatus
This object is used to enable, disable, delete, create an
entry in the SNMP Trap Host Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.4.5.1.5

oriProtocolFilterTable

table
.1.3.6.1.4.1.11898.2.1.5.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriProtocolFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriProtocolFilterTable' 
This table contains the two byte hexadecimal values of the 
protocols.  The packets whose protocol field matches with any of 
the entries in this table will be forwarded or dropped based on 
value of oriProtocolFilterFlag.  This table is limited to 256
ethernet protocols (enteries).
oriProtocolFilterTableEntry row .1.3.6.1.4.1.11898.2.1.5.1.2.1
This object represents an entry in the protocol filter table.
Indexes
Column Syntax OID
oriProtocolFilterTableIndex
This object is used to index the protocol filter table.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.1
oriProtocolFilterProtocol
This object represents a two byte hexadecimal value for the
Ethernet protocol to be filtered (the protocol field of the
Ethernet packet).
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.2
oriProtocolFilterProtocolComment
This object is used as an optional comment for the ethernet
protocol to be filtered.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.3
oriProtocolFilterTableEntryStatus
This object is used to enable, disable, delete, create the
Ethernet protocols in this table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.4
oriProtocolFilterTableInterfaceBitmask
This object is isued to control protocol filtering per interface
for each entry in this table.
InterfaceBitmaskr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.5
oriProtocolFilterProtocolString
This object represents the value in the protocol field of the
Ethernet packet. The value is of 4-digit Hex format.
Example: The value of IP protocol is 0800.
The value of ARP protocol is 0806.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.1.2.1.6

oriAccessControlTable

table
.1.3.6.1.4.1.11898.2.1.5.2.3 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriAccessControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriAccessControlTable' 
This table contains the information about MAC addresses of the 
wireless stations that are either allowed or disallowed access 
(based on oriAccessControlOperation) through this device. 
This table is used only if oriAccessControlStatus is enabled.
oriAccessControlEntry row .1.3.6.1.4.1.11898.2.1.5.2.3.1
This object represents the entry in the access control table.
Indexes
Column Syntax OID
oriAccessControlTableIndex
This object is used as an index for the access control table.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.11898.2.1.5.2.3.1.1
oriAccessControlTableMACAddress
This object represents the MAC address of the wireless station
that can access the device.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.2.3.1.2
oriAccessControlTableComment
This object is used as an optional comment associated to the
access control table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.2.3.1.3
oriAccessControlTableEntryStatus
This object is used to enable, disable, delete, create the entries
in the Access Control Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.2.3.1.4

oriStaticMACAddressFilterTable

table
.1.3.6.1.4.1.11898.2.1.5.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriStaticMACAddressFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriStaticMACAddressFilterTable' 
This table provides the MAC address of the stations on the wired 
and the wireless interface; the MAC addresses will be given in 
pairs.  Stations listed in the Static MAC Address filter will 
have no traffic forwarded by the device.  This way Multicast 
traffic exchanged between stations or servers can be prevented, 
from being transmitted over the wireless medium when both stations 
are actually located on the wired backbone.  This table is limited
to 200 entries.
oriStaticMACAddressFilterEntry row .1.3.6.1.4.1.11898.2.1.5.3.1.1
This object identifies the entry in the Static MAC address
filter table.
Indexes
Column Syntax OID
oriStaticMACAddressFilterTableIndex
This object is used as an index for the Static MAC address
filter table.
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.1
oriStaticMACAddressFilterWiredAddress
This object represents the MAC address of the station on the
wired interface of the device.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.2
oriStaticMACAddressFilterWiredMask
This mask determines the presence of wildcard characters in the
MAC address of the station on the wired interface. The value F
(hex digit) in the mask indicates the presence of a wildcard
character and the value 0 i…
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.3
oriStaticMACAddressFilterWirelessAddress
This object represents the MAC address of the station on the
wireless interface.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.4
oriStaticMACAddressFilterWirelessMask
The mask that determines the presence of wildcard characters in
the MAC address of the station on the wireless side. The value F
(hex digit) indicates the presence of a wildcard character and the
hex digit 0 indicat…
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.5
oriStaticMACAddressFilterTableEntryStatus
This object is used to enable, disable, delete, create an entry
in the Static MAC Address Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.6
oriStaticMACAddressFilterComment
This object is used for an optional comment associated to the
access control table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.3.1.1.7

oriStormThresholdTable

table
.1.3.6.1.4.1.11898.2.1.5.4.3 · 1 row entry · 2 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriStormThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriStormThresholdTable' 
The table containing broadcast and multicast threshold values for 
each interface.
oriStormThresholdTableEntry row .1.3.6.1.4.1.11898.2.1.5.4.3.1
This object represents an entry in the storm threshold filter
table.
Indexes
Column Syntax OID
oriStormThresholdIfBroadcast
This parameter specifies a set of Broadcast Storm thresholds for
each interface/port of the device, identifying separate
values for the number of Broadcast messages/second. Default value
is zero, which means disabled.
Integer32r/w
Constraints:
range: 0-9999
 .1.3.6.1.4.1.11898.2.1.5.4.3.1.1
oriStormThresholdIfMulticast
This parameter specifies a set of Multicast Storm thresholds for
each interface/port of the device, identifying separate
values for the number of Multicast messages/second. Default value
is zero, which means disabled.
Integer32r/w
Constraints:
range: 0-9999
 .1.3.6.1.4.1.11898.2.1.5.4.3.1.2

oriPortFilterTable

table
.1.3.6.1.4.1.11898.2.1.5.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriPortFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriPortFilterTable' 
This table contains the Port number of packets to be filtered. 
The packets whose port field matches with any of the enabled entries in 
this table will be blocked (dropped).  This table is limited to 
256 entries.
oriPortFilterTableEntry row .1.3.6.1.4.1.11898.2.1.5.5.3.1
This parameter represents the entry in the port filter table.
Indexes
Column Syntax OID
oriPortFilterTableEntryIndex
This object is used as the index for the port filter table. This
table supports up to 256 entries.
Integer32
Constraints:
range: 0-256
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.1
oriPortFilterTableEntryPort
This object represents the port number of the packets to be
filtered.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.2
oriPortFilterTableEntryPortType
This object specifies the port type.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.3
oriPortFilterTableEntryInterfaceBitmask
This object is used to control port filtering per interface for
each entry in the table.
InterfaceBitmaskr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.4
oriPortFilterTableEntryComment
This object is used for an optional comment associated to the
port filter table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.5
oriPortFilterTableEntryStatus
This object is used to enable, disable, delete, create an entry
in the Port Filter Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.5.3.1.6

oriBroadcastFilteringTable

table
.1.3.6.1.4.1.11898.2.1.5.6.1 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriBroadcastFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriBroadcastFilteringTable' 
The table entries for broadcast filters.  This table shall contain
5 entries.
oriBroadcastFilteringTableEntry row .1.3.6.1.4.1.11898.2.1.5.6.1.1
This object represents an entry in the broadcast filtering
table.
Indexes
Column Syntax OID
oriBroadcastFilteringTableIndex
This object represents the index of the Broadcast Filtering
table.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.11898.2.1.5.6.1.1.1
oriBroadcastFilteringProtocolName
This object represents the broadcast protocol name to
be filtered.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.6.1.1.2
oriBroadcastFilteringDirection
This object represents the direction of the broadcast filter.
The filter can be enabled for Ethernet to Wireless, Wireless
to Ethernet, or both directions.
Enumerationr/w
Enumerated Values:
1ethernetToWireless
2wirelessToEthernet
3both
 .1.3.6.1.4.1.11898.2.1.5.6.1.1.3
oriBroadcastFilteringTableEntryStatus
This object is used to enable or disable the broadcast filter
table enteries.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.5.6.1.1.4

oriIntraCellBlockingMACTable

table
.1.3.6.1.4.1.11898.2.1.5.9.2 · 1 row entry · 19 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriIntraCellBlockingMACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriIntraCellBlockingMACTable' 
The MAC table entries for IntraCell Blocking filters.  This table 
can contain up to a maximum of 250 entries.
oriIntraCellBlockingMACTableEntry row .1.3.6.1.4.1.11898.2.1.5.9.2.1
This object represents the entry in the IntraCell Blocking MAC Table.
Indexes
Column Syntax OID
oriIntraCellBlockingMACTableIndex
This object is used as the index to the IntraCell Blocking MAC Table.
Integer32
Constraints:
range: 1-250
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.1
oriIntraCellBlockingMACTableMACAddress
This object represents the MAC address of the SU which is allowed to
communicate with other SUs with the same group ID.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.2
oriIntraCellBlockingMACTableGroupID1
This object is used to activate/deactivate Group ID 1.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.3
oriIntraCellBlockingMACTableGroupID2
This object is used to activate/deactivate Group ID 2.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.4
oriIntraCellBlockingMACTableGroupID3
This object is used to activate/deactivate Group ID 3.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.5
oriIntraCellBlockingMACTableGroupID4
This object is used to activate/deactivate Group ID 4.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.6
oriIntraCellBlockingMACTableGroupID5
This object is used to activate/deactivate Group ID 5.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.7
oriIntraCellBlockingMACTableGroupID6
This object is used to activate/deactivate Group ID 6.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.8
oriIntraCellBlockingMACTableGroupID7
This object is used to activate/deactivate Group ID 7.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.9
oriIntraCellBlockingMACTableGroupID8
This object is used to activate/deactivate Group ID 8.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.10
oriIntraCellBlockingMACTableGroupID9
This object is used to activate/deactivate Group ID 9.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.11
oriIntraCellBlockingMACTableGroupID10
This object is used to activate/deactivate Group ID 10.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.12
oriIntraCellBlockingMACTableGroupID11
This object is used to activate/deactivate Group ID 11.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.13
oriIntraCellBlockingMACTableGroupID12
This object is used to activate/deactivate Group ID 12.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.14
oriIntraCellBlockingMACTableGroupID13
This object is used to activate/deactivate Group ID 13.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.15
oriIntraCellBlockingMACTableGroupID14
This object is used to activate/deactivate Group ID 14.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.16
oriIntraCellBlockingMACTableGroupID15
This object is used to activate/deactivate Group ID 15.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.17
oriIntraCellBlockingMACTableGroupID16
This object is used to activate/deactivate Group ID 16.
ObjStatusActiver/w
Type Values:
1active
2inactive
3deleted
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.18
oriIntraCellBlockingMACTableEntryStatus
This object is used to enable, disable, delete, create the entries
in the IntraCell Blocking MAC Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.9.2.1.19

oriIntraCellBlockingGroupTable

table
.1.3.6.1.4.1.11898.2.1.5.9.3 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriIntraCellBlockingGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriIntraCellBlockingGroupTable' 
The Group table entries for IntraCell Blocking Group IDs.  
This table can contain a maximum of 16 entries.
oriIntraCellBlockingGroupTableEntry row .1.3.6.1.4.1.11898.2.1.5.9.3.1
This object represents the entry in the IntraCell Blocking
Group Table.
Indexes
Column Syntax OID
oriIntraCellBlockingGroupTableIndex
This object is used as the index to the IntraCell Blocking
Group Table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.11898.2.1.5.9.3.1.1
oriIntraCellBlockingGroupTableName
This object represents the group name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.5.9.3.1.2
oriIntraCellBlockingGroupTableEntryStatus
This object is used to enable, disable, delete, create the entries
in the IntraCell Blocking Group Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.5.9.3.1.3

oriRADIUSAuthServerTable

table
.1.3.6.1.4.1.11898.2.1.6.1.1 · 1 row entry · 18 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADIUSAuthServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADIUSAuthServerTable' 
This table represents the RADIUS servers that the device will 
communicated with for client authentication.  Usually this table 
should have two members representing the primary and secondary 
(backup) RADIUS Authentication Servers.
oriRADIUSAuthServerTableEntry row .1.3.6.1.4.1.11898.2.1.6.1.1.1
This object represents an entry in the RADIUS Authentication
Server Table.
Indexes
Column Syntax OID
oriRADIUSAuthServerTableIndex
This object is used as an index to the RADIUS Authentication
Server Table.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.1
oriRADIUSAuthServerType
This object indicates if the RADIUS server will provide
Authentication service, Accounting service, or both.
Enumeration
Enumerated Values:
1authentication
2accounting
3authAndAcct
4authdot1x
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.2
oriRADIUSAuthServerTableEntryStatus
This object identifies if the RADIUS server entry is enabled or
disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.3
oriRADIUSAuthServerIPAddressdeprecated
This object represents the IP address of the RADIUS server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.4
oriRADIUSAuthServerDestPort
This object represents the RADIUS server authentication port -
the default value is 1812.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.5
oriRADIUSAuthServerSharedSecret
This object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.6
oriRADIUSAuthServerResponseTime
This object represents the time (in seconds) for which the
RADIUS client will wait, until another authentication request is
sent to the server.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.7
oriRADIUSAuthServerMaximumRetransmission
This object represents the number of retransmissions of
authentication requests by the RADIUS Client to the Server.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.8
oriRADIUSAuthClientAccessRequests
This object represents the number of RADIUS Access Requests
messages transmitted from the client to the server since client
startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.9
oriRADIUSAuthClientAccessRetransmissions
This object represents the number of RADIUS Access Requests
retransmitted by the client to the server since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.10
oriRADIUSAuthClientAccessAccepts
This object indicates the number of RADIUS Access Accept messages
received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.11
oriRADIUSAuthClientAccessChallenges
This object represents the number of RADIUS Access Challenges
messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.12
oriRADIUSAuthClientAccessRejects
This object represents the number of RADIUS Access Rejects
messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.13
oriRADIUSAuthClientMalformedAccessResponses
This object represents the number of malformed RADIUS Access
Response messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.14
oriRADIUSAuthClientAuthInvalidAuthenticators
This object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.15
oriRADIUSAuthClientTimeouts
This object represents the total number of timeouts for RADIUS
Access Request messages since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.16
oriRADIUSAuthServerNameOrIPAddress
This object is used to specify the RADIUS Server host name or
IP Address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.17
oriRADIUSAuthServerAddressingFormat
This object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to…
Enumerationr/w
Enumerated Values:
1ipAddress
2name
 .1.3.6.1.4.1.11898.2.1.6.1.1.1.18

oriRADIUSAcctServerTable

table deprecated
.1.3.6.1.4.1.11898.2.1.6.2.3 · 1 row entry · 14 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADIUSAcctServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADIUSAcctServerTable' 
This table represents the RADIUS servers that the device will 
communicated with for accounting.  Usually this table should 
have two members representing the primary and secondary (backup) 
RADIUS Accounting Servers.  This object has been deprecated.
oriRADIUSAcctServerTableEntry row .1.3.6.1.4.1.11898.2.1.6.2.3.1
This object represents an entry into the RADIUS Accouting
Server Table. This object has been deprecated.
Indexes
Column Syntax OID
oriRADIUSAcctServerTableIndexdeprecated
This object is used as the index to the RADIUS Server Accounting
table. This object has been deprecated.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.1
oriRADIUSAcctServerTypedeprecated
This object indicates if the RADIUS server will provide
Authentication service, Accounting service, or both.
This object has been deprecated.
Enumeration
Enumerated Values:
1authentication
2accounting
3authAndAcct
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.2
oriRADIUSAcctServerTableEntryStatusdeprecated
This object identifies if the RADIUS server entry is enabled or
disabled. This object has been deprecated.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.3
oriRADIUSAcctServerIPAddressdeprecated
This object represents the IP address of the RADIUS server.
This object has been deprecated.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.4
oriRADIUSAcctServerDestPortdeprecated
This object represents the RADIUS server accounting port -
the default value is 1813. This object has been deprecated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.5
oriRADIUSAcctServerSharedSecretdeprecated
This object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks. This object has been deprecated.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.6
oriRADIUSAcctServerResponseTimedeprecated
This object represents the time (in seconds) for which the
RADIUS client will wait, until another accounting request is
sent to the server. This object has been deprecated.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.7
oriRADIUSAcctServerMaximumRetransmissiondeprecated
This object represents the number of retransmissions of
accounting requests by the RADIUS Client to the Server.
This object has been deprecated.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.8
oriRADIUSAcctClientAccountingRequestsdeprecated
This object represents the number of Accounting Requests messages
sent since system startup. This object has been deprecated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.9
oriRADIUSAcctClientAccountingRetransmissionsdeprecated
This object represents the number of Accounting Requests
messages retransmitted sent since system startup.
This object has been deprecated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.10
oriRADIUSAcctClientAccountingResponsesdeprecated
This object represents the number of Accounting Response messages
received since system startup. This object has been deprecated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.11
oriRADIUSAcctClientAcctInvalidAuthenticatorsdeprecated
This object represents the number of Accounting Response
messages which contain invalid authenticators received since system
startup. This object has been deprecated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.12
oriRADIUSAcctServerNameOrIPAddressdeprecated
This object is used to specify the RADIUS Server host name or the
IP Address. This object has been deprecated.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.13
oriRADIUSAcctServerAddressingFormatdeprecated
This object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to…
Enumerationr/w
Enumerated Values:
1ipAddress
2name
 .1.3.6.1.4.1.11898.2.1.6.2.3.1.14

oriRADIUSSvrTable

table
.1.3.6.1.4.1.11898.2.1.6.10.1 · 1 row entry · 15 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADIUSSvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADIUSSvrTable' 
This table represents the RADIUS server profile that the device will 
communicated with for client authentication and/or accounting.  This 
table has two indices - the first index indicates the profile number
and the second index indicates primary and secondary/backup servers.
oriRADIUSSvrTableEntry row .1.3.6.1.4.1.11898.2.1.6.10.1.1
This object represents an entry in the RADIUS Server Table.
Indexes
Column Syntax OID
oriRADIUSSvrTableProfileIndex
This object represents the RADIUS Server profile index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.1
oriRADIUSSvrTablePrimaryOrSecondaryIndex
This object is a second index to the RADIUS Server table, which
identifies a server bein primary or secondary/backup.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.2
oriRADIUSSvrTableProfileName
This object is used to specify a unique name for the RADIUS server
profile.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.3
oriRADIUSSvrTableAddressingFormat
This object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to…
Enumerationr/w
Enumerated Values:
1ipAddress
2name
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.4
oriRADIUSSvrTableNameOrIPAddress
This object is used to specify the RADIUS Server host name or
IP Address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.5
oriRADIUSSvrTableDestPort
This object represents the RADIUS server authentication port -
the default value is 1812.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.6
oriRADIUSSvrTableSharedSecret
This object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.7
oriRADIUSSvrTableResponseTime
This object represents the time (in seconds) for which the
RADIUS client will wait, until another authentication request is
sent to the server.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.8
oriRADIUSSvrTableMaximumRetransmission
This object represents the number of retransmissions of
authentication requests by the RADIUS Client to the Server.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.9
oriRADIUSSvrTableVLANID
This object represents the VLAND ID that will be used to tag
RADIUS messages from the client to the server.
VlanIdr/w
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.10
oriRADIUSSvrTableMACAddressFormat
This object is used to configure the MAC Address format that is to be
used for communication with the RADIUS Server.
Examples of MAC Address Format are:
- Dash Delimited: 00-11-22-AA-BB-CC
- Colon Delimi…
Enumerationr/w
Enumerated Values:
1dashDelimited
2colonDelimited
3singleDashDelimited
4noDelimiter
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.11
oriRADIUSSvrTableAuthorizationLifeTime
This object represents the authorization lifetime for a certain
MAC based RADIUS authenticated client. A value of zero (0) means that
re-authorization is disabled. The units for this object is seconds.
Integer32r/w
Constraints:
range: 0-0
range: 900-43200
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.12
oriRADIUSSvrTableAccountingInactivityTimer
This parameter represents the client idle timeout in
minutes. Once this timer has expired an Accounting Stop request
is sent to the RADIUS Accounting Server.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.13
oriRADIUSSvrTableAccountingUpdateInterval
This object is used to specify the interval in seconds at which
RADIUS accounting update messages will be sent. This object is defined
in minutes; a value of zero (0) disables the accouting updates.
minutesInteger32r/w
Constraints:
range: 0-0
range: 10-10080
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.14
oriRADIUSSvrTableRowStatus
This object represents the status of the RADIUS Server profile.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.6.10.1.1.15

oriRADIUSAuthClientStatTable

table
.1.3.6.1.4.1.11898.2.1.6.10.3 · 1 row entry · 10 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADIUSAuthClientStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADIUSAuthClientStatTable' 
This table is used to store RADIUS Authentication Client Statistics
for the configured profiles.
oriRADIUSAuthClientStatTableEntry row .1.3.6.1.4.1.11898.2.1.6.10.3.1
This object represents an entry, primary and secondary/backup,
in the RADIUS Authentication Client Statistics table.
Indexes
Column Syntax OID
oriRADIUSAuthClientStatTableIndex
This object is used as an index to the RADIUS Authentication Client
Statistics Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.1
oriRADIUSAuthClientStatTablePrimaryOrSecondaryIndex
This object is used as an secondary index to the RADIUS
Authentication Client Statistics Table, which is used to indicate
primary and secondary/backup server statistics.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.2
oriRADIUSAuthClientStatTableAccessRequests
This object represents the number of RADIUS Access Requests
messages transmitted from the client to the server since client
startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.3
oriRADIUSAuthClientStatTableAccessRetransmissions
This object represents the number of RADIUS Access Requests
retransmitted by the client to the server since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.4
oriRADIUSAuthClientStatTableAccessAccepts
This object indicates the number of RADIUS Access Accept messages
received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.5
oriRADIUSAuthClientStatTableAccessChallenges
This object represents the number of RADIUS Access Challenges
messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.6
oriRADIUSAuthClientStatTableAccessRejects
This object represents the number of RADIUS Access Rejects
messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.7
oriRADIUSAuthClientStatTableMalformedAccessResponses
This object represents the number of malformed RADIUS Access
Response messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.8
oriRADIUSAuthClientStatTableBadAuthenticators
This object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.9
oriRADIUSAuthClientStatTableTimeouts
This object represents the total number of timeouts for RADIUS
Access Request messages since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.3.1.10

oriRADIUSAcctClientStatTable

table
.1.3.6.1.4.1.11898.2.1.6.10.4 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADIUSAcctClientStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADIUSAcctClientStatTable' 
This table is used to store RADIUS Accounting Client Statistics
for the configured profiles.
oriRADIUSAcctClientStatTableEntry row .1.3.6.1.4.1.11898.2.1.6.10.4.1
This object represents an entry, primary and secondary/backup,
in the RADIUS Accounting Client Statistics table.
Indexes
Column Syntax OID
oriRADIUSAcctClientStatTableIndex
This object is used as an index to the RADIUS Accounting Client
Statistics Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.1
oriRADIUSAcctClientStatTablePrimaryOrSecondaryIndex
This object is used as an secondary index to the RADIUS
Accounting Client Statistics Table, which is used to indicate
primary and secondary/backup server statistics.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.2
oriRADIUSAcctClientStatTableAccountingRequests
This object represents the number of RADIUS Accounting Requests
messages transmitted from the client to the server since client
startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.3
oriRADIUSAcctClientStatTableAccountingRetransmissions
This object represents the number of RADIUS Accounting Requests
retransmitted by the client to the server since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.4
oriRADIUSAcctClientStatTableAccountingResponses
This object indicates the number of RADIUS Accounting Response
messages received since system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.5
oriRADIUSAcctClientStatTableBadAuthenticators
This object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.6.10.4.1.6

oriIAPPMACIPTable

table
.1.3.6.1.4.1.11898.2.1.10.21 · 1 row entry · 5 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriIAPPMACIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriIAPPMACIPTable' 
This table contains a list of devices on the network that support
IAPP and have the feature enabled.
oriIAPPMACIPTableEntry row .1.3.6.1.4.1.11898.2.1.10.21.1
This object represents an entry in the IAPP table, which
essentially is a device that supports IAPP and has the feature
enabled.
Indexes
Column Syntax OID
oriIAPPMACIPTableIndex
This object is used as the index for the IAPP MAC-IP table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.10.21.1.1
oriIAPPMACIPTableSystemName
This object represents the System Name of the IAPP enabled
device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.10.21.1.2
oriIAPPMACIPTableIPAddress
This object represents the IP Address of the IAPP enabled device.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.10.21.1.3
oriIAPPMACIPTableBSSID
This object represents the BSSID (MAC address of wireless
interface) of the IAPP enabled device.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.10.21.1.4
oriIAPPMACIPTableESSID
This object represents the ESSID (network name) of the IAPP
enabled device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.10.21.1.5

oriLinkTestTable

table
.1.3.6.1.4.1.11898.2.1.11.5 · 1 row entry · 33 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriLinkTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriLinkTestTable' 
This table contains the information for the stations currently 
associated with the access point.
oriLinkTestTableEntry row .1.3.6.1.4.1.11898.2.1.11.5.1
This object represents the entry in the Remote Link Test table.
Indexes
Column Syntax OID
oriLinkTestTableIndex
This object represents a unique value for each station. The
value for each station must remain constant at least from one
explore to the next.
Integer32
Constraints:
range: 0-500
 .1.3.6.1.4.1.11898.2.1.11.5.1.1
oriLinkTestInProgress
When this object is set to 2 the device will initiate a link test
sequence with this station.
Enumerationr/w
Enumerated Values:
1noLinkTestInProgress
2linkTestIinProgress
 .1.3.6.1.4.1.11898.2.1.11.5.1.2
oriLinkTestStationName
This object identifies the name of the station whom which the
link test is being performed.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.11.5.1.3
oriLinkTestMACAddress
This object represents the MAC address that will be mapped to
the IP Address of the station.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.11.5.1.4
oriLinkTestStationProfile
This object represents the profile/capabilities for this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.5
oriLinkTestOurCurSignalLevel
The current signal level (in dB) for the link test from this
station. This object indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.6
oriLinkTestOurCurNoiseLevel
The current noise level (in dB) for the link test to this station.
This object indicates the running average of the local noise
level.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.7
oriLinkTestOurCurSNR
The current signal to noise ratio for the link test to this
station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.8
oriLinkTestOurMinSignalLevel
The minimum signal level during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.9
oriLinkTestOurMinNoiseLevel
The minimum noise level during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.10
oriLinkTestOurMinSNR
The minimum signal to noise ratio during the link test to this
station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.11
oriLinkTestOurMaxSignalLevel
The maximum signal level during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.12
oriLinkTestOurMaxNoiseLevel
The maximum noise level during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.13
oriLinkTestOurMaxSNR
The maximum signal to noise ratio during the link test to this
station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.14
oriLinkTestOurLowFrameCount
The total number of frames sent at 1 Mbit/s speed during the link
test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.15
oriLinkTestOurStandardFrameCount
The total number of frames sent at 2 Mbit/s speed during the link
test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.16
oriLinkTestOurMediumFrameCount
The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.17
oriLinkTestOurHighFrameCount
The total number of frames sent at 11 Mbit/s (for Turbo-8, it is
8 Mbit/s) speed during the link test to this station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.18
oriLinkTestHisCurSignalLevel
The current signal level for the link test to the remote station
or access point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.19
oriLinkTestHisCurNoiseLevel
The current noise level for the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.20
oriLinkTestHisCurSNR
The current signal to noise ratio for the link test to the remote
station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.21
oriLinkTestHisMinSignalLevel
The minimum signal level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.22
oriLinkTestHisMinNoiseLevel
The minimum noise level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.23
oriLinkTestHisMinSNR
The minimum signal to noise ratio during the link test to the
remote station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.24
oriLinkTestHisMaxSignalLevel
The maximum signal level during the link test to the remote
station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.25
oriLinkTestHisMaxNoiseLevel
The maximum noise level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.26
oriLinkTestHisMaxSNR
The maximum signal to noise ratio during the link test to the
remote station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.27
oriLinkTestHisLowFrameCount
The total number of frames sent at 1 Mbit/s speed during the link
test to the remote station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.28
oriLinkTestHisStandardFrameCount
The total number of frames sent at 2 Mbit/s speed during the link
test to the remote station or access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.29
oriLinkTestHisMediumFrameCount
The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.30
oriLinkTestHisHighFrameCount
The total number of frames sent at 11 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point device.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.5.1.31
oriLinkTestInterface
This object represents the wireless interface number to which the
Client has sent the Explore Response Message.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.11.5.1.32
oriLinkTestRadioType
The Wireless Standard for example IEEE 802.11, 802.11b, 802.11a, or
802.11g being used by the remote station.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.11.5.1.33

oriLinkTestDataRateTable

table
.1.3.6.1.4.1.11898.2.1.11.6 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriLinkTestDataRateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriLinkTestDataRateTable' 
This table contains counters for the data rates for the stations 
currently associated to the access point.
oriLinkTestDataRateTableEntry row .1.3.6.1.4.1.11898.2.1.11.6.1
This object represents the entry in the Remote Link Test data
rate counter table.
Indexes
Column Syntax OID
oriLinkTestDataRateTableIndex
This object is the second index to the Link Test Data Rate Counter
Table. The data rates negotiated by the access point and client
station will represent an index into this table. The data rates are
defined in units …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.11.6.1.1
oriLinkTestDataRateTableRemoteCount
The total number of frames sent at the data rate value of the index
during the link test to the remote station or access point device.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.11.6.1.2
oriLinkTestDataRateTableLocalCount
The total number of frames sent at the data rate value of the index
(oriLinkTestDataRateTableindex) during the link test to the client
station indenfied by the index (oriLinkTestTableIndex).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.11.6.1.3

oriLinkIntTable

table
.1.3.6.1.4.1.11898.2.1.12.4 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriLinkIntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriLinkIntTable' 
This table contains the target IP addresses in order to perform 
the link integrity check.  This table is limited to 5 entries.
oriLinkIntTableEntry row .1.3.6.1.4.1.11898.2.1.12.4.1
This object identifies the entry in the link integrity target
table.
Indexes
Column Syntax OID
oriLinkIntTableIndex
This object is used as an index for the link integrity target
table.
Integer32
Constraints:
range: 0-5
 .1.3.6.1.4.1.11898.2.1.12.4.1.1
oriLinkIntTableTargetIPAddress
This object represents the IP address of the target machine for
the link integrity check.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.12.4.1.2
oriLinkIntTableComment
This object is used as an optional comment associated to the
link integrity table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.12.4.1.3
oriLinkIntTableEntryStatus
This object is used to enable, disable, or delete an
entry in the link integrity table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
 .1.3.6.1.4.1.11898.2.1.12.4.1.4

oriQoSPolicyTable

table
.1.3.6.1.4.1.11898.2.1.14.1 · 1 row entry · 7 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriQoSPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriQoSPolicyTable' 
This table is used to configure Quality of Service policies to be used
in the Access Point.
oriQoSPolicyTableEntry row .1.3.6.1.4.1.11898.2.1.14.1.1
This object represents entries in the QoS Policy Table.
Indexes
Column Syntax OID
oriQoSPolicyTableIndex
This object is used as the primary index to the QoS Policy Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.14.1.1.1
oriQoSPolicyTableSecIndex
This object is used as the secondary index to the QoS Policy Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.14.1.1.2
oriQoSPolicyName
This object is used to specify a name for the QoS Policy.
DisplayString32r/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.14.1.1.3
oriQoSPolicyType
This object is used to specify the QoS policy type.
Enumeration
Enumerated Values:
1inboundLayer2
2inboundLayer3
3outboundLayer2
4outboundLayer3
5spectralink
 .1.3.6.1.4.1.11898.2.1.14.1.1.4
oriQoSPolicyPriorityMapping
This object is used to configure the QoS priority mapping. The index
from either the QoS 802.1D to 802.1p mapping table or the index from
the 802.1D to IP DSCP mapping table should be specified depending on the
policy…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.14.1.1.5
oriQoSPolicyMarkingStatus
This object is used to enable or disable QoS markings.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.14.1.1.6
oriQoSPolicyTableRowStatus
The object is used to configure the QoS Policy Table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.14.1.1.7

oriQoSDot1DToDot1pMappingTable

table
.1.3.6.1.4.1.11898.2.1.14.2 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriQoSDot1DToDot1pMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriQoSDot1DToDot1pMappingTable' 
This table is used to configure Quality of Service mappings between
802.1D and 802.1p priorities.
oriQoSDot1DToDot1pMappingTableEntry row .1.3.6.1.4.1.11898.2.1.14.2.1
This object represents entries in the QoS 802.1D to 802.1p Mapping
Table.
Indexes
Column Syntax OID
oriQoSDot1DToDot1pMappingTableIndex
This object is used as the primary index to the QoS 802.1D to 802.1p
mapping table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.14.2.1.1
oriQoSDot1dPriority
This object is used to specify the 802.1d priority and is used as
the secondary index to the 802.1D to 802.1p mapping table.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.11898.2.1.14.2.1.2
oriQoSDot1pPriority
This object is used to specify the 802.1D priority to be mapped to a
802.1p priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11898.2.1.14.2.1.3
oriQoSDot1DToDot1pMappingTableRowStatus
The object is used to configure the QoS 802.1D to 802.1p mapping table
row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.14.2.1.4

oriQoSDot1DToIPDSCPMappingTable

table
.1.3.6.1.4.1.11898.2.1.14.3 · 1 row entry · 5 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriQoSDot1DToIPDSCPMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriQoSDot1DToIPDSCPMappingTable' 
This table is used to configure Quality of Service mappings between
802.1D to IP DSCP priorities.
oriQoSDot1DToIPDSCPMappingTableEntry row .1.3.6.1.4.1.11898.2.1.14.3.1
This object represents entries in the 802.1D to IP DSCP Mapping
Table.
Indexes
Column Syntax OID
oriQoSDot1DToIPDSCPMappingTableIndex
This object is used as the primary index to the 802.1D to IP DSCP
mapping table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.14.3.1.1
oriQoSDot1DToIPDSCPPriority
This object is used to specify the 802.1D priority and is used as
the secondary index to the 802.1D to IP DSCP mapping table.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.11898.2.1.14.3.1.2
oriQoSIPDSCPLowerLimit
This object is used to specify IP DSCP lower limit.
Integer32r/w
Constraints:
range: 0-62
 .1.3.6.1.4.1.11898.2.1.14.3.1.3
oriQoSIPDSCPUpperLimit
This object is used to specify IP DSCP upper limit.
Integer32r/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.11898.2.1.14.3.1.4
oriQoSDot1DToIPDSCPMappingTableRowStatus
The object is used to configure the 802.1D to IP DSCP mapping
table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.14.3.1.5

oriDHCPServerIPPoolTable

table
.1.3.6.1.4.1.11898.2.1.15.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriDHCPServerIPPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriDHCPServerIPPoolTable' 
This table contains the pools of IP Addresses that the DHCP server 
will assign to the DHCP clients.  This table is limited to
20.
oriDHCPServerIPPoolTableEntry row .1.3.6.1.4.1.11898.2.1.15.1.2.1
This object represents entries in the DHCP IP Address Pool Table.
Indexes
Column Syntax OID
oriDHCPServerIPPoolTableIndex
This object is used as the index for the IP Address Pool table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.1
oriDHCPServerIPPoolTableStartIPAddress
This object represents the start IP address for this DHCP IP
Address IP Pool Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.2
oriDHCPServerIPPoolTableEndIPAddress
This object represents the end IP address for this DHCP IP
Address IP Pool Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.3
oriDHCPServerIPPoolTableWidth
This object represents the width or number of IP Address in the
DHCP IP Address Pool table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.4
oriDHCPServerIPPoolTableDefaultLeaseTime
This object represents the default lease time, in seconds, for
the IP address assigned by the DHCP server to the DHCP client.
Integer32r/w
Constraints:
range: 3600-86400
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.5
oriDHCPServerIPPoolTableMaximumLeaseTime
This object represents the maximum lease time in seconds for
the IP address assigned by the DHCP server to the DHCP client.
Integer32r/w
Constraints:
range: 3600-86400
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.6
oriDHCPServerIPPoolTableComment
This object represents an optional comment for this table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.7
oriDHCPServerIPPoolTableEntryStatus
The object indicates the status of the DHCP IP Address Pool
Table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.15.1.2.1.8

oriDHCPRelayDHCPServerTable

table
.1.3.6.1.4.1.11898.2.1.15.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriDHCPRelayDHCPServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriDHCPRelayDHCPServerTable' 
This table contains a list of DHCP servers to which the
DHCP Agent will communicate with.
oriDHCPRelayDHCPServerTableEntry row .1.3.6.1.4.1.11898.2.1.15.3.2.1
This object represents and entry in the DHCP Server table.
Indexes
Column Syntax OID
oriDHCPRelayDHCPServerTableIndex
This object is used as the index to this table. This table is
limited to 10 entries.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.11898.2.1.15.3.2.1.1
oriDHCPRelayDHCPServerTableIpAddress
This object represents the IP address of the DHCP server
that shall receive DHCP requests from the device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.15.3.2.1.2
oriDHCPRelayDHCPServerTableComment
This object represents an optional comment in order to provide
additional information or a unique identifier for the DHCP server
(for example the server system name).
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.15.3.2.1.3
oriDHCPRelayDHCPServerTableEntryStatus
This object is used to enable, disable, delete or create an
entry in the DHCP Server Table.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.15.3.2.1.4

oriHTTPWebSitenameTable

table
.1.3.6.1.4.1.11898.2.1.16.4 · 1 row entry · 5 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriHTTPWebSitenameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriHTTPWebSitenameTable' 
This table is used to store the different website interfaces 
stored in the device.  Different interfaces can be used to 
support multiple languages, user levels (novice, expert), etc.
oriHTTPWebSitenameTableEntry row .1.3.6.1.4.1.11898.2.1.16.4.1
This object represents an entry is the HTTP website name table.
Indexes
Column Syntax OID
oriHTTPWebSitenameTableIndex
This objects represents the index to the website interface
table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.16.4.1.1
oriHTTPWebSiteFilename
This object represents the filename under which the website
interface is stored in the device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.16.4.1.2
oriHTTPWebSiteLanguage
This object represents the language of the website interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.16.4.1.3
oriHTTPWebSiteDescription
This object provides a description for the website interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.16.4.1.4
oriHTTPWebSitenameTableStatus
This object is used to enable, disable, or delete a website
interface file.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
 .1.3.6.1.4.1.11898.2.1.16.4.1.5

oriWDSSetupTable

table
.1.3.6.1.4.1.11898.2.1.17.1 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWDSSetupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWDSSetupTable' 
This table is used in to configure the WDS feature in the device.
oriWDSSetupTableEntry row .1.3.6.1.4.1.11898.2.1.17.1.1
This object represents an entry in the WDS table. Note this
table is index by ifIndex and WDS table index.
Indexes
Column Syntax OID
oriWDSSetupTablePortIndex
This object represents the WDS port number.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.11898.2.1.17.1.1.1
oriWDSSetupTableEntryStatus
This object is used to enable or disable a WDS table entry (link).
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.17.1.1.2
oriWDSSetupTablePartnerMACAddress
This object represents the partner MAC address for a WDS table
entry (link).
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.17.1.1.3

oriWDSSecurityTable

table
.1.3.6.1.4.1.11898.2.1.17.2 · 1 row entry · 2 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriWDSSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriWDSSecurityTable' 
This table is used in to configure the WDS security modes for all
entries in the WDS table.
oriWDSSecurityTableEntry row .1.3.6.1.4.1.11898.2.1.17.2.1
This object represents an entry in the WDS security table. Note this
table is index by ifIndex since the security configuration will apply
for all the WDS links per interface.
Indexes
Column Syntax OID
oriWDSSecurityTableSecurityMode
This object is used to configure the WDS security mode. Currently
the supported WDS security modes are none and wep.
Enumerationr/w
Enumerated Values:
1none
6wep
 .1.3.6.1.4.1.11898.2.1.17.2.1.1
oriWDSSecurityTableEncryptionKey0
This object represents the WDS Encryption Key 0. When the WDS
security mode is configured to wep, this object must be configured to
a valid value. This object should be treated as write-only and
returned as asterisk…
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.17.2.1.2

oriSecurityEncryptionKeyLengthTable

table deprecated
.1.3.6.1.4.1.11898.2.1.21.2 · 1 row entry · 1 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSecurityEncryptionKeyLengthTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSecurityEncryptionKeyLengthTable' 
This table is used to specify the encryption key length for
the wireless interface(s).  This table has been deprecated.
oriSecurityEncryptionKeyLengthTableEntry row .1.3.6.1.4.1.11898.2.1.21.2.1
This object represents an entry in the encryption key
length table. This object has been deprecated.
Indexes
Column Syntax OID
oriSecurityEncryptionKeyLengthdeprecated
This object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), and 128 bits
(104 + 24 for IV). This object has been deprecated.
Enumerationr/w
Enumerated Values:
1sixtyFourBits
2oneHundredTwentyEightBits
 .1.3.6.1.4.1.11898.2.1.21.2.1.1

oriRADScanResultsTable

table
.1.3.6.1.4.1.11898.2.1.21.4.6 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRADScanResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRADScanResultsTable' 
This table is used to store the RAD scan results.  Each entry
represents an access point scanned in the network.
oriRADScanResultsTableEntry row .1.3.6.1.4.1.11898.2.1.21.4.6.1
This object represents an entry in the RAD scan results table.
Indexes
Column Syntax OID
oriRADScanResultsTableIndex
This object is used as the index to the scan results table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.4.6.1.1
oriRADScanResultsMACAddress
This object represents the MAC address of the access point detected during
a RAD scan.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.21.4.6.1.2
oriRADScanResultsFrequencyChannel
This object represents the frequency channel of the access point.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.4.6.1.3

oriSecurityConfigTable

table deprecated
.1.3.6.1.4.1.11898.2.1.21.5 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSecurityConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSecurityConfigTable' 
This table is used to specify the security configuration for
the wireless interface(s) in the access point.
oriSecurityConfigTableEntry row .1.3.6.1.4.1.11898.2.1.21.5.1
This object represents an entry in the security configuration table.
Indexes
Column Syntax OID
oriSecurityConfigTableSupportedSecurityModesdeprecated
This object is used to provide information on the supported
security modes by the wireless interface(s). The possible security
modes can be:
- None: no security mode enabled.
- dot1x: 802.1x authentication e…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.21.5.1.1
oriSecurityConfigTableSecurityModedeprecated
This object is used to configure the security mode. The supported
security modes are:
- None: no security mode enabled.
- dot1x: 802.1x authentication enabled.
- mixed: mixed WEP and 802.1x.
- wpa: WiFi Protected A…
Enumerationr/w
Enumerated Values:
1none
2dot1x
3mixed
4wpa
5wpa-psk
 .1.3.6.1.4.1.11898.2.1.21.5.1.2
oriSecurityConfigTableRekeyingIntervaldeprecated
This object represents the encryption rekeying interval in seconds.
secondsInteger32r/w
Constraints:
range: 60-65535
 .1.3.6.1.4.1.11898.2.1.21.5.1.3
oriSecurityConfigTableEncryptionKeyLengthdeprecated
This object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV).
Enumerationr/w
Enumerated Values:
1sixtyFourBits
2oneHundredTwentyEightBits
3oneHundredFiftyTwoBits
 .1.3.6.1.4.1.11898.2.1.21.5.1.4

oriRogueScanConfigTable

table
.1.3.6.1.4.1.11898.2.1.21.8.1 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRogueScanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRogueScanConfigTable' 
This table is used to configure the Rogue Scan feature per wireless
network interface card.
oriRogueScanConfigTableEntry row .1.3.6.1.4.1.11898.2.1.21.8.1.1
This object represents an entry in the Rogue Scan Config Table.
Indexes
Column Syntax OID
oriRogueScanConfigTableScanMode
This object is used to configure the scan mode for the wireless NIC.
Enumerationr/w
Enumerated Values:
1bkScanMode
2contScanMode
 .1.3.6.1.4.1.11898.2.1.21.8.1.1.1
oriRogueScanConfigTableScanCycleTime
This object is used to configure the rogue scan cycle time for the
wireless NIC.
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.11898.2.1.21.8.1.1.2
oriRogueScanConfigTableScanStatus
This object is used to enable/disable rogue scan on the wireless
NIC.
ObjStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.21.8.1.1.3

oriRogueScanResultsTable

table
.1.3.6.1.4.1.11898.2.1.21.8.8 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriRogueScanResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriRogueScanResultsTable' 
This table is used to store the rogue scan results.  Each entry
represents a rogue wireless station detected in the network.
oriRogueScanResultsTableEntry row .1.3.6.1.4.1.11898.2.1.21.8.8.1
This object represents an entry in the rogue scan results table.
Indexes
Column Syntax OID
oriRogueScanResultsTableIndex
This object is used as the index to the rogue scan results table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.1
oriRogueScanResultsStationType
This object represents the type of station detected during a
rogue scan.
Enumeration
Enumerated Values:
1unknown
2infrastructureClient
3accessPoint
4ibssClient
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.2
oriRogueScanResultsMACAddress
This object represents the MAC address of the station detected during
a rogue scan.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.3
oriRogueScanResultsFrequencyChannel
This object represents the frequency channel on which the rogue
wireless stations was detected.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.5
oriRogueScanResultsSNR
This object represents the signal to noise ration (SNR) for the
station detected during a rogue scan.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.6
oriRogueScanResultsBSSID
This object represents BSSID of the station detected during a
rogue scan.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11898.2.1.21.8.8.1.7

oriSecurityProfileTable

table
.1.3.6.1.4.1.11898.2.1.21.9 · 1 row entry · 13 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriSecurityProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriSecurityProfileTable' 
This table is used to configure a security profile.  A security
profile can consist of single or muliple security modes.
oriSecurityProfileTableEntry row .1.3.6.1.4.1.11898.2.1.21.9.1
This object represents an entry in the security profile table.
This table is index by two indices - the first/primary index defines
the security profile, the second index defines a single or multiple
security policies p…
Indexes
Column Syntax OID
oriSecurityProfileTableIndex
This object represents the primary index of the Security Policy
Table. This index is used to specify which security policy will
be used per SSID, in the Wireless Interface SSID Table. A security
policy can consist of …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.9.1.1
oriSecurityProfileTableSecModeIndex
This object is the secondary index to the Security Policy Table.
This index will represent the different security modes per security
profile.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.21.9.1.2
oriSecurityProfileTableAuthenticationMode
This object is used to specify the authentication mode for the
security mode.
Enumeration
Enumerated Values:
1none
2dot1x
3psk
 .1.3.6.1.4.1.11898.2.1.21.9.1.3
oriSecurityProfileTableCipherMode
This object is used to specify the cipher mode/type for the security
mode.
Enumeration
Enumerated Values:
1none
2wep
3tkip
4aes
 .1.3.6.1.4.1.11898.2.1.21.9.1.4
oriSecurityProfileTableEncryptionKey0
This object represents Encryption Key 0. This object should be
treated as write-only and returned as asterisks.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.21.9.1.5
oriSecurityProfileTableEncryptionKey1
This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.21.9.1.6
oriSecurityProfileTableEncryptionKey2
This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.21.9.1.7
oriSecurityProfileTableEncryptionKey3
This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks.
WEPKeyTyper/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.11898.2.1.21.9.1.8
oriSecurityProfileTableEncryptionTxKey
This object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. The default value
for this object should be key 0.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.11898.2.1.21.9.1.9
oriSecurityProfileTableEncryptionKeyLength
This object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV).
Enumerationr/w
Enumerated Values:
1sixtyFourBits
2oneHundredTwentyEightBits
3oneHundredFiftyTwoBits
 .1.3.6.1.4.1.11898.2.1.21.9.1.10
oriSecurityProfileTablePSKValue
The Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
authentication suite. In that case, the PMK will obtain its value
from this object.
This object is logically write-only. Reading this variable shall
…
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.11898.2.1.21.9.1.11
oriSecurityProfileTablePSKPassPhrase
The PSK, for when RSN in PSK mode is the selected authentication
suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
manner of setting the PSK uses the password-to-key algorithm defined
in the sta…
OctetStringr/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.11898.2.1.21.9.1.12
oriSecurityProfileTableStatus
This object represents the Table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11898.2.1.21.9.1.14

oriPPPoESessionTable

table
.1.3.6.1.4.1.11898.2.1.22.4 · 1 row entry · 22 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriPPPoESessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriPPPoESessionTable' 
This table is used to configure the PPPoE session information.
oriPPPoESessionTableEntry row .1.3.6.1.4.1.11898.2.1.22.4.1
This object represents an entry in the PPPoE session table.
Indexes
Column Syntax OID
oriPPPoESessionTableIndex
This object is used as the index to the PPPoE Session Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.4.1.1
oriPPPoESessionWANConnectMode
This object represents the WAN connect mode.
Enumerationr/w
Enumerated Values:
1alwaysOn
2onDemand
3manual
 .1.3.6.1.4.1.11898.2.1.22.4.1.2
oriPPPoESessionIdleTimeOut
This object is used as a timeout for the PPPoE session to be
disconnected from public side if idle for specified amount of
time.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.4.1.3
oriPPPoESessionConnectTime
This object identifies the PPPoE session connect time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.4
oriPPPoESessionConnectTimeLimitation
This object represents the maximum connection time per session.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.4.1.5
oriPPPoESessionConfigPADITxInterval
This object represents the time in seconds between PADI retries
from the Host.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.4.1.6
oriPPPoESessionConfigPADIMaxNumberOfRetries
This object represents the number of times the Host sends
a PADI.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.4.1.7
oriPPPoESessionBindingsNumberPADITx
This object represents the number of PPPoE PADI transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.8
oriPPPoESessionBindingsNumberPADTTx
This object represents the number of PPPoE PADT transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.9
oriPPPoESessionBindingsNumberServiceNameErrors
This object represents the number of PPPoE Service-Name-Error
tags received/transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.10
oriPPPoESessionBindingsNumberACSystemErrors
This object represents the number of PPPoE AC-System-Error
tags received/transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.11
oriPPPoESessionBindingsNumberGenericErrorsRx
This object represents the number of PPPoE Generic-Error
tags received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.12
oriPPPoESessionBindingsNumberGenericErrorsTx
This object represents the number of PPPoE Generic Error
tags transmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.13
oriPPPoESessionBindingsNumberMalformedPackets
This object represents teh number of malformed PPPoE
packets received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.14
oriPPPoESessionBindingsNumberMultiplePADORx
This object represents the number of PPPoE multiple PADO's
received after a PADI request.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.22.4.1.15
oriPPPoESessionUserName
This object represents the PPPoE user name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.22.4.1.16
oriPPPoESessionUserNamePassword
This object represents the PPPoE user name password. This object
should be treated as write-only and returned as asterisks.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.22.4.1.17
oriPPPoESessionServiceName
This object represents the PPPoE service name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.22.4.1.18
oriPPPoESessionISPName
This object represents the PPPoE ISP name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.22.4.1.19
oriPPPoESessionTableStatus
This object represents the PPPoE ISP table entry status.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.22.4.1.20
oriPPPoESessionWANManualConnect
This object is used to connect of disconnect the PPPoE session
when the connect mode is set to manual.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11898.2.1.22.4.1.21
oriPPPoESessionWANConnectionStatus
This object represents the state of the PPPoE WAN connection
interface.
Enumeration
Enumerated Values:
1null
2start
3addingStack
4stackAdded
5stackAddError
6connectFailed
7authFailed
8up
9down
10suspended
11unknown
 .1.3.6.1.4.1.11898.2.1.22.4.1.22

oriPPPoEMACtoSessionTable

table
.1.3.6.1.4.1.11898.2.1.22.5 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriPPPoEMACtoSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriPPPoEMACtoSessionTable' 
This table is used to map client MAC address to PPPoE Session
information for an ISP.
oriPPPoEMACtoSessionTableEntry row .1.3.6.1.4.1.11898.2.1.22.5.1
This object represents an entry in the PPPoE MAC to
Session table.
Indexes
Column Syntax OID
oriPPPoEMACtoSessionTableIndex
This object is used as the index to the PPPoE Session Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.22.5.1.1
oriPPPoEMACtoSessionTableMACAddress
This object represents the client MAC address.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.11898.2.1.22.5.1.2
oriPPPoEMACtoSessionTableISPName
This object represents the ISP name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.22.5.1.3
oriPPPoEMACtoSessionTableStatus
This object represents the PPPoE MAC to Session table
entry status.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.22.5.1.4

oriConfigFileTable

table
.1.3.6.1.4.1.11898.2.1.23.2 · 1 row entry · 3 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriConfigFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriConfigFileTable' 
This table contains the current configuration files stored in the
device.  This table is used to manage the different configuration
files.
oriConfigFileTableEntry row .1.3.6.1.4.1.11898.2.1.23.2.1
This object represents an entry in the configuration file table.
Indexes
Column Syntax OID
oriConfigFileTableIndex
This object represents the index to the configuration file
table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.23.2.1.1
oriConfigFileName
This object represents the configuration file name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.23.2.1.2
oriConfigFileStatus
This object represents the status of the configuration file.
The possible options are:
- Enable: active configuration file
- Disable: inactive configuration file
- Delete: in order to delete the configuratio…
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
 .1.3.6.1.4.1.11898.2.1.23.2.1.3

oriNATStaticIPBindTable

table
.1.3.6.1.4.1.11898.2.1.26.5 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriNATStaticIPBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriNATStaticIPBindTable' 
This table contains NAT IP bind specific information.
oriNATStaticIPBindTableEntry row .1.3.6.1.4.1.11898.2.1.26.5.1
This object is an entry in the NAT Static IP Bind Table.
Indexes
Column Syntax OID
oriNATStaticIPBindTableIndex
This object is used as the index for the NAT static IP
bind table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.26.5.1.1
oriNATStaticIPBindLocalAddress
This object represents the local IP address for this NAT
Static IP bind Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.26.5.1.2
oriNATStaticIPBindRemoteAddress
This object represents the remote IP address for this NAT
Static IP bind Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.26.5.1.3
oriNATStaticIPBindTableEntryStatus
The object indicates the status of the NAT Static IP Bind
Table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.26.5.1.4

oriNATStaticPortBindTable

table
.1.3.6.1.4.1.11898.2.1.26.6 · 1 row entry · 6 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriNATStaticPortBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriNATStaticPortBindTable' 
This table is used to configure NAT Port bind specific 
information.
oriNATStaticPortBindTableEntry row .1.3.6.1.4.1.11898.2.1.26.6.1
This object represents an entry in the NAT Static Port Bind
Table.
Indexes
Column Syntax OID
oriNATStaticPortBindTableIndex
This object is used as the index for the NAT static Port
bind table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.26.6.1.1
oriNATStaticPortBindLocalAddress
This object represents the local IP address for this NAT Static
Port bind Table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.26.6.1.2
oriNATStaticPortBindStartPortNumber
This object represents the start port number for this NAT Static
Port bind Table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.26.6.1.3
oriNATStaticPortBindEndPortNumber
This object represents the end port number for this NAT Static
Port bind Table entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.26.6.1.4
oriNATStaticPortBindPortType
This object represents the port type for this NAT Static
Port bind Table entry.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.11898.2.1.26.6.1.5
oriNATStaticPortBindTableEntryStatus
The object indicates the status of the NAT Static Port Bind
Table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.26.6.1.6

oriVLANIDTable

table deprecated
.1.3.6.1.4.1.11898.2.1.30.3 · 1 row entry · 2 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriVLANIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriVLANIDTable' 
This table is used to configure the VLAN IDs for the device.  This
table has been deprecated.
oriVLANIDTableEntry row .1.3.6.1.4.1.11898.2.1.30.3.1
This object represents an entry in the respective table. In this
case each table entry represents a VLAN ID. This object has been
deprecated.
Indexes
Column Syntax OID
oriVLANIDTableIndexdeprecated
This object represents the index to the VLAN ID Table. This object
has been deprecated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.30.3.1.1
oriVLANIDTableIdentifierdeprecated
This object represents the VLAN Identifier (ID). This object has been
deprecated.
VlanIdr/w
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.11898.2.1.30.3.1.2

oriDMZHostTable

table
.1.3.6.1.4.1.11898.2.1.31.1 · 1 row entry · 4 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriDMZHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriDMZHostTable' 
A table containing DMZ host IP information. 
Only if the system is in Gateway mode, and the NAT is enabled, 
and this table has valid 'enabled' entry, the DMZ takes effect.
oriDMZHostTableEntry row .1.3.6.1.4.1.11898.2.1.31.1.1
This object represents an entry in the DMZ host IP Table.
Indexes
Column Syntax OID
oriDMZHostTableIndex
This object is used as the index for the DMZ host IP Table.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.31.1.1.1
oriDMZHostTableHostIP
This object represents the DMZ host IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.31.1.1.2
oriDMZHostTableComment
This objecgt is used for an optional comment associated to the
DMZ host IP Table entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.31.1.1.3
oriDMZHostTableEntryStatus
The object indicates the status of the DMZ host IP Table entry.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
4create
 .1.3.6.1.4.1.11898.2.1.31.1.1.4

oriStationStatTable

table
.1.3.6.1.4.1.11898.2.1.33.1 · 1 row entry · 24 columns
Open in standard view
Uses the proxim variant from /opt/observium/mibs/proxim.
Command help
Walk oriStationStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ORiNOCO-MIB' -M '/opt/observium/mibs/proxim:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ORiNOCO-MIB::oriStationStatTable' 
This table contains wireless stations statistics.
oriStationStatTableEntry row .1.3.6.1.4.1.11898.2.1.33.1.1
This object represents an entry in the respective table. In this
case each table entry represents a wireless station.
Indexes
Column Syntax OID
oriStationStatTableIndex
This object represents the index of the stations statistics
table. This table is limited to 500 entries.
Integer32
Constraints:
range: 0-500
 .1.3.6.1.4.1.11898.2.1.33.1.1.1
oriStationStatTableMACAddress
This object represents the MAC address of the station for which
the statistics are gathered.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11898.2.1.33.1.1.2
oriStationStatTableIPAddress
This object represents the IP address of the stations for which
the statistics are gathered. If the IP address is not known,
0.0.0.0 will be returned.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11898.2.1.33.1.1.3
oriStationStatTableInterface
This object represents the number of the interface on which the
station is last seen.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11898.2.1.33.1.1.4
oriStationStatTableName
This object represents the name of the station. If the name is
not known, an empty string will be returned.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11898.2.1.33.1.1.5
oriStationStatTableType
This object represents the type of station.
Enumeration
Enumerated Values:
1sta
2wds
3worpBase
4worpSatellite
5norc
 .1.3.6.1.4.1.11898.2.1.33.1.1.6
oriStationStatTableMACProtocol
This object represents the MAC protocol for this station.
Enumeration
Enumerated Values:
1ieee802dot11
2ieee802dot11a
3ieee802dot11b
4worp
5ieee802dot11g
 .1.3.6.1.4.1.11898.2.1.33.1.1.7
oriStationStatTableAdminStatus
This object represents the administrative state for the station.
The testing(3) state indicates that no operational packets can
be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11898.2.1.33.1.1.8
oriStationStatTableOperStatus
This object represents the current operational state of the
interface. The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11898.2.1.33.1.1.9
oriStationStatTableLastChange
This object represents the value of sysUpTime at the time the
station entered its current operational state. If the current
state was entered prior to the last re-initialization of the
local network management subsy…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.10
oriStationStatTableLastState
This object represents the last state of this station.
Enumeration
Enumerated Values:
1unknown
2registering
3authenticating
4registered
5timeout
6aborded
7rejected
8linktest
 .1.3.6.1.4.1.11898.2.1.33.1.1.11
oriStationStatTableInOctets
The total number of octets received from the station,
including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.12
oriStationStatTableInUcastPkts
This object represents the number of unicast packets from the
station that are further processed by either by the bridge/router
or by the internal host.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.13
oriStationStatTableInNUcastPkts
This object represents the number of non-unicast packets
(i.e. broadcast or multicast) from the station that are further
processed by either by the bridge/router or by the internal host.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.14
oriStationStatTableInDiscards
This object represents the number of inbound packets which were
chosen to be discarded even though no errors had been detected to
prevent their being deliverable to the internal bridge/router or
the internal host. O…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.15
oriStationStatTableOutOctets
This object represents the total number of octets send to the
station, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.16
oriStationStatTableOutUcastPkts
This object represents the number of packets that the internal
bridge/router or the internal host requested be transmitted to the
station, including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.17
oriStationStatTableOutNUcastPkts
This object represents the number of packets that the internal
bridge/router or the internal host requested be transmitted to a
non-unicast (i.e. broadcast or multicast) address that includes
the station. This count…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.18
oriStationStatTableOutDiscards
This object represents the number of outbound packets which were
chosen to be discarded even though no errors had been detected to
prevent their being deliverable to the internal bridge/router or
the internal host. …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.19
oriStationStatTableInSignal
This object represents the current signal level calculated over
the inbound packets from this station. This variable indicates
the running average of the local signal level using the algorithm
(3/4*oldvalue + 1/4*new…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.33.1.1.20
oriStationStatTableInNoise
This object represents the current noise level calculated over
the inbound packets from this station. This variable indicates
the running average of the local noise level using the algorithm
(3/4*oldvalue + 1/4*newva…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.33.1.1.21
oriStationStatTableRemoteSignal
This object represents the current remote signal level calculated
over the inbound packets from this station on the remote station.
This variable indicates the running average of the remote signal
level using the alg…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.33.1.1.22
oriStationStatTableRemoteNoise
This object represents the current remote noise level calculated
over the inbound packets from this station on the remote station.
This variable indicates the running average of the remote noise
level using the algor…
Integer32
Constraints:
range: -102--10
 .1.3.6.1.4.1.11898.2.1.33.1.1.23
oriStationStatTableLastInPktTime
This object represents the value of sysUpTime at the time the
last packet from the remote station was received.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11898.2.1.33.1.1.24