OPTIX-TUNNEL-OAM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
16
optixTunnelOamTable
table.1.3.6.1.4.1.2011.2.25.4.50.10.1.2
·
1 row entry
·
11 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk optixTunnelOamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-TUNNEL-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-TUNNEL-OAM-MIB::optixTunnelOamTable'
This table is used to configuretunnel OAM attributes, includingthe tunnel OAM enable status, detection mode, CC detection mode, SD/SF thresholds, and query the OAM status.
This entry is used to manage tunnel OAM attributes and status.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object indicates the tunnel OAM index, ranging from 1 to 0x00ffffff.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.1 |
||||||||||||
|
This object indicates whether the OAM is enabled. 1: enable 0: disable
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.2 |
||||||||||||
|
This object indicates the OAM detection mode. 1: self 2: manu 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional ingress tunnel.The queried value is invalid.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.3 |
||||||||||||
|
This object indicates the CC detection packet type. 1: cv (default value) 2: ffd
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.4 |
||||||||||||
|
This object indicates the CC detection packet frequency. When the packet type is cv, the frequency is an invalid value, 0xff. When the packet type is ffd, the valid value of the frequency is as follows: 1: 3.3 ms 2: 10 …
|
Unsigned32r/w Constraints: range: 1-7range: 255-255 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.5 |
||||||||||||
|
This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional egress node. The quried value is invalid.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.6 |
||||||||||||
|
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
|
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.7 |
||||||||||||
|
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
|
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.8 |
||||||||||||
|
This object indicates the reverse tunnel index. This parameter is applicable to only when the tunnel serves as an egress node. When the value is 0xffffffff, the reverse tunnel index is not configured.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.9 |
||||||||||||
|
This object indicates the OAM protocol standard&nbsp; 1: 1711 2: 1731
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.10 |
||||||||||||
|
This object indicates the row status. 1: active 6: destroy,destroy indicates clearing the instance's configure.createAndGo is not supported
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.2.1.255 |
optixTunnelOamStateTable
table.1.3.6.1.4.1.2011.2.25.4.50.10.1.3
·
1 row entry
·
5 columns
Uses the huawei variant from
Command help
/opt/observium/mibs/huawei.
Walk optixTunnelOamStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-TUNNEL-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-TUNNEL-OAM-MIB::optixTunnelOamStateTable'
This table is used to query thetunnel OAM status.
This entry is used tomanage the tunnel OAM status.
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
For bidirectional tunnels, the status query is performaned in two directions, local and remote ends. This object indicates the direction of thetunnel OAM, localor remote end. For unidirectional ingress tunnels, only the…
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.1 |
||||||||||||||||||
|
This object indicates the tunnel OAM status. 0: initialstate, 1: nearendavailable, 2: nearenddefectavailable, 3: nearenddefectunavailable, 4: nearendunavailable, 5: farendavailable, 6: farenddefectavailable, 7: farendde…
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.2 |
||||||||||||||||||
|
This object indicates the defect type of the tunnel OAM. 1: dserver, 2: dpeerme, 3: dlocv, 4: dttsimismatch, 5: dttsimismerge, 6: dexcess, 7: dunknown, 255: invalid
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.3 |
||||||||||||||||||
|
This object indicates the unavailable time of the tunnel. The time ranges from 0 to 300,000 ms. 4294967295: invalid
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.4 |
||||||||||||||||||
|
This object indicates the position of the tunnel defect: a node identified by IP address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.2011.2.25.4.50.10.1.3.1.5 |