OPTIX-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
62

optixStaticUcTunnelTable

table
.1.3.6.1.4.1.2011.2.25.4.50.9.1.7 · 1 row entry · 37 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixStaticUcTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-TUNNEL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-TUNNEL-MIB::optixStaticUcTunnelTable' 
This table is used to configure and manage the static unicast MPLS tunnels. The tunnel must be configured on each node along the tunnel.
optixStaticUcTunnelEntry row .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1
This entry indicates the parameter table for static unicast tunnels.
Indexes
Column Syntax OID
optixStcUcTnlIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff,0 means auto.
Unsigned32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.1
optixStcUcTnlPosition
This object indicates the tunnel node location. 1: ingress 2: transit 3: egress
Enumerationr/w
Enumerated Values:
1ingress
2transit
3egress
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.2
optixStcUcTnldirection
This object indicates the tunnel direction. 0: uni 1: bi
Enumerationr/w
Enumerated Values:
0uni
1bi
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.3
optixStcUcTnlIngressId
This object indicates the source node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the nod…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.4
optixStcUcTnlEgressId
This object indicates the sink node ID, which is an unicast address but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the node …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.5
optixStcUcTnlTunnelId
This object indicates the tunnel ID, ranging from 1 to 0xffff.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.6
optixStcUcTnlInBid
This object indicates the input slot ID.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.7
optixStcUcTnlInSubBid
This object indicates the input subboard ID. If no subboard is available, the value is 255.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.8
optixStcUcTnlInPortId
This object indicates the input port number.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.9
optixStcUcTnlInLabel
This object indicates the forward ingress label. The corresponding spacecannot exceed that of the unicast label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.10
optixStcUcTnlOutBid
This object indicates the output slot ID.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.11
optixStcUcTnlOutSubBid
This object indicates the output subboard ID. If no subboard is available, the value is 255.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.12
optixStcUcTnlOutPortId
This object indicates the output port number.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.13
optixStcUcTnlOutLabel
This object indicates the forward egress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.14
optixStcUcTnlNextHop
This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.15
optixStcUcTnlRsvInLabel
This object indicates the backward ingress label. The corresponding space cannot exceed that of the unicast label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.16
optixStcUcTnlRsvOutLabel
This object indicates the backward egress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.17
optixStcUcTnlRsvNextHop
This object indicates the backward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.18
optixStcUcTnlName
This object indicates the tunnel name. The tunnel name can be null, space, or chinese characters of a maximum of 64 bytes.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.19
optixStcUcTnlBandwidthCIR
Indicates the CIR. 0: The bandwidth is not restricted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.20
optixStcUcTnlBandwidthCBS
Indicates the CBS. 0: The bandwidth is not restricted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.21
optixStcUcTnlBandwidthPIR
Indicates the PIR. 0: The bandwidth is not restricted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.22
optixStcUcTnlBandwidthPBS
Indicates the PBS. 0: The bandwidth is not restricted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.23
optixStcUcTnlDsType
This object indicates the tunnel schedualing type.
Enumerationr/w
Enumerated Values:
0elsp
1llsp
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.24
optixStcUcTnlDsCos
This object indicates the tunnel COS value:1:be 2:af1 3:af2 4:af3 5:af4 6:ef 7:cs6 8:cs7 255:null
Enumerationr/w
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
255null
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.25
optixStcUcTnlExp
This object indicates the tunnel EXP value.
Unsigned32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.26
optixStcUcTnlLspMode
This object indicates the LSP mode. 1: uniform 2: pipe
Enumerationr/w
Enumerated Values:
1uniform
2pipe
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.27
optixStcUcTnlEnable
Indicates whether an LSP is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.28
optixStcUcTnlVlanId
This object indicates the VLAN ID. Valid values: 1-4094, 0xffff.
Unsigned32r/w
Constraints:
range: 65535-65535
range: 1-4094
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.29
optixStcUcTnlVlanpri
This object indicates the VLAN priority. Valid values: 0xff
Unsigned32r/w
Constraints:
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.30
optixStcUcTnlState
This object indicates the tunnel status. 0: up 1: down 2: fail (The tunnel cannot be created.)
Enumeration
Enumerated Values:
0up
1down
2fail
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.31
optixStcUcTnlBwLimit
This object indicates the tunnel bandwidth limit state. 0:disabel 1:enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.32
optixStcUcTnlCheckRet
This object indicates the check result of tunnels.
Enumeration
Enumerated Values:
0normal
1abnormal
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.33
optixStcUcTnlCT
This object indicates the CT of tunnels.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.34
optixStcUcTnlSetupPri
This object indicates the setup priority of tunnels.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.35
optixStcUcTnlHoldPri
This object indicates the hold priority of tunnels.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.36
optixStcUcTnlRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.7.1.255

optixTunnelCrossTable

table
.1.3.6.1.4.1.2011.2.25.4.50.9.1.8 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelCrossTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-TUNNEL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-TUNNEL-MIB::optixTunnelCrossTable' 
This table is used to query the actual tunnel forwarding and cross-connect paths. For bidirectional tunnels, there are forward and backward cross-connections. For unidirectional tunnels, thereare only forward cross-connections.
optixTunnelCrossEntry row .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1
This entry is used to query the parameter table for actualtunnel cross-connections.
Indexes
Column Syntax OID
optixTunnelIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff.
Unsigned32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.1
optixTunneldirection
This object indicates the cross-connect direction. 1: forward 2: backward
Enumeration
Enumerated Values:
1posit
2minus
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.2
optixTnlInBid
This object indicates the input slot ID.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.3
optixTnlInSubBid
This object indicates the input subboard ID. If no subboard is available, the value is 255.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.4
optixTnlInPortId
This object indicates the input port number.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.5
optixTnlInLabel
This object indicates the forward ingress label. The corresponding space cannot exceed that of the unicast label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.6
optixTnlOutBid
This object indicates the output slot ID.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.7
optixTnlOutSubBid
This object indicates the output subboard ID. If no subboard is available, the value is 255.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.8
optixTnlOutPortId
This object indicates the output port number.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.9
optixTnlOutLabel
This object indicates the forward egress label.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.10
optixTnlNextHop
This object indicates the forward next hop address, which is an unicast address, but not a multicast/broadcast/0.0.0.0 address/loopback address/reserved address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.11
optixTnlIngressId
This object indicates the source node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the no…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.12
optixTnlEgressId
This object indicates the sink node ID, which is an unicast address, but not a multicast/broadcast/network address/ NE address/loopback address/reserved address. If the values of them are all 0, this node ID is the node…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.13
optixTnlTunnelId
This object indicates the tunnel ID, ranging from 1 to 0xffff.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.14
optixTnlInstance
This object indicates the tunnel channel instance.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.8.1.15

optixTunnelCarryCESNumberTable

table
.1.3.6.1.4.1.2011.2.25.4.50.9.1.9 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelCarryCESNumberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-TUNNEL-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-TUNNEL-MIB::optixTunnelCarryCESNumberTable' 
This table is used to query the number of CES services that can be configured on the free bandwidth.
optixTunnelCarryCESNumberEntry row .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1
This entry is used to query theinformation table for PWs carried on the tunnel.
Indexes
Column Syntax OID
optixCarryCESTunnelIndex
This object indicates the tunnel index, ranging from 1 to 0x00ffffff.
Unsigned32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.1
optixCarryCESType
This object indcates the PW type. 0x0010: SONET/SDH Circuit Emulation over Packet 0x0011: Structure-agnostic E1 over Packet 0x0015: CESoPSN basic mode
Enumeration
Enumerated Values:
16cep
17satope1
21cesopsnbas
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.2
optixCarryCESLevel
This object indicates the service emulation level. 1: VC12 2: VC3 3: VC11 4: VC4 5: VC4 (3 x VC3)
Enumeration
Enumerated Values:
1vc12
2vc3
3vc11
4vc4
5triplicatevc3
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.3
optixCarryCESPathNumber
This object indicates the number of timeslots/channels.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.4
optixCarryCESRTPEnable
This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp
Enumeration
Enumerated Values:
0disable
1enablehuawei
2enablestandard
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.5
optixCarryCESLoadtime
This object indicates the packet loading time. Valid values: 125-5000 us; step: 125.For VC4/VC4 (3VC3) CES packets, the loading time is not supported. The value is 0xffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.6
optixCarryCESIsmspw
This object is used to check whether the PW is an MS-PW. 0: no 1: yes
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.7
optixCarryCESSohThorough
This object indicates the enabled status of the transmission of section overheads. 0: disable 1: enable (Only for VC4 CES services)
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.8
optixCarryCESLoadbytes
This object indicates the number of load bytes. For VC4/VC4 (3 x VC3) CES packets, the loading time is not supported. The value is 0xffff.
Unsigned32
Constraints:
range: 65535-65535
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.9
optixCarryCESNumber
This object indicates the number of CES services that can be configured on the free bandwidth of the tunnel/port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.9.1.9.1.10