OPTIX-SEP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
79

optixSEPConfigInfoTable

table
.1.3.6.1.4.1.2011.2.25.4.50.36.1.1 · 1 row entry · 20 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSEPConfigInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SEP-MIB::optixSEPConfigInfoTable' 
This table contains configuration information of SEP.
optixSEPConfigInfoEntry row .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1
This entry contains configuration information of SEP.
Indexes
Column Syntax OID
optixSEPID
This node indicates the SEP protection ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.1
optixSEPCtrVlan
This node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.2
optixSEPSrvVlanNum
This node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.3
optixSEPSrvVlanList
This node indicates the SEP service VLAN ID list.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.4
optixSEPPreemtMode
This node indicates the SEP preemption mode. Value 1 indicates the non-preemption mode; value 2 indicates the manual preemption mode; value 3 indicates the delay preemption mode. The default value is 1.
Enumerationr/w
Enumerated Values:
1nonpreempt
2manual
3delay
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.5
optixSEPDelayTime
This node indicates the SEP preemption hold-off time, in seconds. The value ranges from 15 to 600, and the step is 1. The default value is 15.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.6
optixSEPTCInterval
This node indicates the SEP TC hold-off time, in seconds. The value ranges from 1 to 10. The default value is 2.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.7
optixSEPTCNotifyNum
This node indicates the number of SEP nodes to be notified of the SEP TC. The value ranges from 0 to 8. Value 0 indicates that the SEP nodes are not notified.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.8
optixSEPTCNotifyList
This node indicates the list of SEP nodes to be notified of the SEP TC.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.9
optixSEPAuthenType
This node indicates the SEP authentication mode. Value 0 indicates that no authentication is performed; value 1 indicates that the authentication password is encrypted by HMAC-SHA256. The default value is 0.
Enumerationr/w
Enumerated Values:
0none
1hmacsha256
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.10
optixSEPAuthenPwd
This node indicates the SEP authentication password. It is set to a null character string if no authentication is performed and to a character string of 1 to 64 bytes if the authentication password is encrypted by HMAC-…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.11
optixSEPBlockMode
This node indicates the SEP port blocking mode. Value 1 indicates that the port with the highest priority is the blocked port; value 2 indicates that an intermediate port in the SEP segment is the blocked port; value 3 …
Enumerationr/w
Enumerated Values:
1optimal
2middle
3hop
4name
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.12
optixSEPBlockPortHop
This node indicates the number of hops of the blocked port when the SEP port blocking mode is hop. This node is valid only when the block mode is hop and is set to 0xffff in other scenarios.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.13
optixSEPBlockPortSysName
This node indicates the system name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other scenarios.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.14
optixSEPBlockPortName
This node indicates the name of the blocking port when the SEP port block mode is name. This node is valid only when the block mode is name and is not processed in other scenarios.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.15
optixSEPName
This node describes the SEP name.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.16
optixSEPClearPKTCount
This node indicates whether to clear packet statistics on an SEP port. Value 0 indicates that the packet statistics are cleared.
Enumerationr/w
Enumerated Values:
0clear
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.17
optixSEPAddVlanList
This node indicates the SEP service VLAN ID list to add.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.18
optixSEPDelVlanList
This node indicates the SEP service VLAN ID list to be deleted.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.19
optixSEPSetSysNameType
Set a name type for the sep system.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.1.1.20

optixSEPPortInfoTable

table
.1.3.6.1.4.1.2011.2.25.4.50.36.1.2 · 1 row entry · 27 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSEPPortInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SEP-MIB::optixSEPPortInfoTable' 
This table contains information of SEP ports.
optixSEPPortInfoEntry row .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1
This entry contains information of SEP ports.
Indexes
Column Syntax OID
optixSEPBoardID
This node indicates the slot ID of an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.1
optixSEPSubcard
This node indicates the subboard ID of an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.2
optixSEPPortID
This node indicates the SEP port number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.3
optixSEPPortCfgRole
This node indicates the configuration role of an SEP port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 indicates the no-neighb…
Enumeration
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.4
optixSEPPortWorkRole
This node indicates the running role of an SEP port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 indicates the no-neighbor pri…
Enumeration
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.5
optixSEPPortPriority
This node indicates the priority of an SEP port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.6
optixSEPPortState
This node indicates the SEP port status. Value 0 indicates discarding; value 1 indicates forwarding.
Enumeration
Enumerated Values:
0discarding
1forwarding
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.7
optixSEPNeiPortSysName
This node indicates the system name of the SEP neighbor port. The NE ID is used as the system name.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.8
optixSEPNeiPortName
This node indicates the SEP neighbor port name, which is a string in the format of Slot ID/Subboard ID/Port number.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.9
optixSEPNeiPortMac
This node indicates the physical address of the SEP neighbor port.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.10
optixSEPNeiPortID
This node indicates the SEP neighbor port number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.11
optixSEPNeiPortState
This node indicates the SEP neighbor port status. Value 0 indicates down; value 1 indicates initialized; value 2 indicates preup; value 3 indicates up; value 4 indicates conflict; value 0xff indicates none.
Enumeration
Enumerated Values:
0down
1init
2preup
3up
4conflict
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.12
optixSEPPortSendNBRTLV
This node indicates the statistics on the NBR TLV sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.13
optixSEPPortSendLSPINFOTLV
This node indicates the statistics on the LSP INFO TLV sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.14
optixSEPPortSendLSPACKTLV
This node indicates the statistics on the LSP ACK TLV sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.15
optixSEPPortSendPREEMPTREGTLV
This node indicates the statistics on the PREEMPT REQ TLV sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.16
optixSEPPortSendPREEMPTACKTLV
This node indicates the statistics on the PREEMPT ACK TLV sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.17
optixSEPPortSendTCNotify
This node indicates the statistics on the TC Notify sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.18
optixSEPPortSendEPA
This node indicates the statistics on the EPA sent from an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.19
optixSEPPortRecvNBRTLV
This node indicates the statistics on the NBR TLV received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.20
optixSEPPortRecvLSPINFOTLV
This node indicates the statistics on the LSP INFO TLV received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.21
optixSEPPortRecvLSPACKTLV
This node indicates the statistics on the LSP ACK TLV received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.22
optixSEPPortRecvPREEMPTREGTLV
This node indicates the statistics on the PREEMPT REQ TLV received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.23
optixSEPPortRecvPREEMPTACKTLV
This node indicates the statistics on the PREEMPT ACK TLV received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.24
optixSEPPortRecvTCNotify
This node indicates the statistics on the TC Notify received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.25
optixSEPPortRecvEPA
This node indicates the statistics on the EPA received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.26
optixSEPPortErrPkg
This node indicates the statistics on the error packets received by an SEP port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.2.1.27

optixSEPTopoTable

table
.1.3.6.1.4.1.2011.2.25.4.50.36.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSEPTopoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SEP-MIB::optixSEPTopoTable' 
This table contains topology information of SEP.
optixSEPTopoEntry row .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1
This entry contains topology information of SEP.
Indexes
Column Syntax OID
optixSEPTopoIndex
This node describes the SEP topology information record index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.1
optixSEPTopoSysName
This node indicates the system name in the SEP topology information. The NE ID is used as the system name.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.2
optixSEPTopoPortName
This node indicates the port name in the SEP topology information, which is a string in the format of Slot ID/Subboard ID/Port number.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.3
optixSEPTopoPortCfgRole
This node indicates the port configuration role in the SEP topology information. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 i…
Enumeration
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.4
optixSEPTopoPortWorkRole
This node indicates the port working role in the SEP topology information. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 indicat…
Enumeration
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.5
optixSEPTopoPortMac
This node indicates the port physical address in the SEP topology information.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.6
optixSEPTopoPortID
This node indicates the port number in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.7
optixSEPTopoPortPriority
This node indicates the port priority in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.8
optixSEPTopoPortState
This node indicates the port status in the SEP topology information. Value 0 indicates discarding; value 1 indicates forwarding.
Enumeration
Enumerated Values:
0discarding
1forwarding
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.9
optixSEPTopoHop
This node indicates the number of hops in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.10
optixSEPTopoLinkState
This node indicates the link status in the SEP topology information. Value 0 indicates down; value 1 indicates up.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.11
optixSEPTopoBroPortName
This node indicates the brother port name in the SEP topology information, which is a string in the format of Slot ID/Subboard ID/Port number.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.12
optixSEPTopoBroPortID
This node indicates the brother port number in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.13
optixSEPTopoNeiSysName
This node indicates the neighbor system name in the SEP topology information. The NE ID is used as the system name.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.14
optixSEPTopoNeiPortName
This node indicates the neighbor system port name in the SEP topology information.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.15
optixSEPTopoNeiSysMac
This node indicates the physical address of the neighbor system in the SEP topology information.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.16
optixSEPTopoNeiPortID
This node indicates the neighbor port number in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.17
optixSEPTopoNeiState
This node indicates the neighbor status in the SEP topology information. Value 0 indicates down; value 1 indicates init; value 2 indicates preup; value 3 indicates up; value 4 indicates conflict; value 0xff indicates no…
Enumeration
Enumerated Values:
0down
1init
2preup
3up
4conflict
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.18
optixSEPTopoAgeingTime
This node indicates the aging time in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.19
optixSEPTopoSerializationNum
This node indicates the serial number in the SEP topology information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.3.1.20

optixSEPCrtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.36.1.4 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSEPCrtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SEP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SEP-MIB::optixSEPCrtTable' 
This table describes the information about SEP creation.
optixSEPCrtEntry row .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1
This entry contains creating information of SEP.
Indexes
Column Syntax OID
optixSEPAddCtrVlan
This node indicates the SEP control VLAN ID, which ranges from 1 to 4094 and must be different from service VLAN IDs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.1
optixSEPEastBoardID
This node indicates the slot ID of the SEP east port. Value 0xffff indicates that no east port is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.2
optixSEPEastSubcard
This node indicates the subboard ID of the SEP east port. Value 0xff indicates that no subboard is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.3
optixSEPEastPortID
This node indicates the SEP east port number. Value 0xffff indicates that no east port is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.4
optixSEPEastPortRole
This node indicates the role of the SEP east port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 indicates the no-neighbor prima…
Enumerationr/w
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.5
optixSEPWestBoardID
This node indicates the slot ID of the SEP west port. Value 0xffff indicates that no west port is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.6
optixSEPWestSubcard
This node indicates the subboard ID of the SEP west port. Value 0xff indicates that no subboard is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.7
optixSEPWestPortID
This node indicates the SEP west port number. Value 0xffff indicates that no west port is available.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.8
optixSEPWestPortRole
This node indicates the role of the SEP west port. Value 0x10 indicates a common port; value 0x22 indicates the primary edge port; value 0x21 indicates the secondary edge port; value 0x32 indicates the no-neighbor prima…
Enumerationr/w
Enumerated Values:
16common
33secedge
34priedge
49nonbrsecedge
50nonbrpriedge
255none
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.9
optixSEPAddSrvVlanNum
This node indicates the SEP service VLAN quantity, which ranges from 0 to 253. Value 0 indicates that all services on the port are protected.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.10
optixSEPAddSrvVlanList
This node indicates the SEP service VLAN ID list.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.11
optixSEPRowStatus
This node indicates the row status of the SEP creating information table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.36.1.4.1.255