OPTIX-SDH-SYS-SYN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
20

optixSdhSysSynTable

table
.1.3.6.1.4.1.2011.2.25.4.10.48.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSdhSysSynTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-SYS-SYN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-SYS-SYN-MIB::optixSdhSysSynTable' 
This table describes the configurations of SDH system synchronization source
optixSdhSysSynEntry row .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1
This entry describes the configurations of SDH system synchronization source
Indexes
Column Syntax OID
optixSdhSysSynSwState
This parameter specifies switch state. 0: synAuto, 1: synMan, 2: synForce
Enumerationr/w
Enumerated Values:
0synAuto
1synMan
2synForce
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.1
optixSdhSysSynCurrentSyn
This parameter specifies current synchronize. Value range: 0x01ff0001 to 0x06ff0006 with 0x00f00001, 0x00f00002, and 0x00f10001.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.2
optixSdhSysSynQualityLevel1
This parameter specifies quality level 1. 0: qlUnknown, 2: qlPrc, 4: qlSsua, 8: qlSsub, 11: qlSec, 15: qlDnu
Enumerationr/w
Enumerated Values:
0qlUnknown
2qlPrc
4qlSsua
8qlSsub
11qlSec
15qlDnu
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.3
optixSdhSysSynQualityLevel2
This parameter specifies quality level 2. 0: qlUnknown, 2: qlPrc, 4: qlSsua, 8: qlSsub, 11: qlSec, 15: qlDnu
Enumerationr/w
Enumerated Values:
0qlUnknown
2qlPrc
4qlSsua
8qlSsub
11qlSec
15qlDnu
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.4
optixSdhSysSynCurSyn
This parameter specifies cur synchronize. Value range: 0x01ff0001 to 0x06ff0006 with 0x00f00001, 0x00f00002, and 0x00f10001.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.5
optixSdhSysSynWorkMode
This parameter specifies work mode. 1: trace, 2: keep, 3: free
Enumeration
Enumerated Values:
1trace
2keep
3free
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.6
optixSdhSysSyn24HourKeepMode
This parameter specifies 24 hour keep mode. 0: normal outdata, 1: last data holding
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.7
optixSdhSynProtectSynRvtMode
This parameter specifies synchronize source degression switch enable state. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.8
optixSdhSynProtectSynWtrTime
This parameter specifies synchronize source wait to recover time. Value range: 0 to 12 (unit: minute).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.9
optixSysSynPriTableCLkNumber
This parameter specifies the ssm protocol pri table clock number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.10
optixSysSynPriTableCLkList
This parameter specifies the ssm protocol pri table clock list.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.11
optixSdhSysSynCurSynS1Value
This parameter specifies the s1 value of current synchronize. 0: qlUnknown, 2: qlPrc, 4: qlSsua, 8: qlSsub, 11: qlSec, 15: qlDnu
Enumeration
Enumerated Values:
0qlUnknown
2qlPrc
4qlSsua
8qlSsub
11qlSec
15qlDnu
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.12
optixSynbaddetectObjFlag
This parameter specifies the enable status of clock source frequency deviationdetection. 1: enable; 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.1.1.14

optixSdhSysSynClassTable

table
.1.3.6.1.4.1.2011.2.25.4.10.48.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSdhSysSynClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-SYS-SYN-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-SYS-SYN-MIB::optixSdhSysSynClassTable' 
This table contains configuration information of system synchronize class
optixSdhSysSynClassEntry row .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1
Entry containing configuration information of system synchronize class
Indexes
Column Syntax OID
optixSdhSysSynId
This parameter specifies synchronize source. Value range: 0x01ff0001 to 0x06ff0006 with 0x00f00001, 0x00f00002, and 0x00f10001.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.1
optixSdhSynProtectEnable
This parameter specifies synchronizesource enable state. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.2
optixSdhSysSynStatus
This parameter specifies synchronize source status. 0: invalid, 1: valid
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.3
optixSSMExQulity
This parameter specifies the ssm protocol s1 qulity. Value range: 0x00, 0x02, 0x04, 0x08, 0x0b, 0x0f, and 0xff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.4
optixSdhSysSynS1Value
This parameter specifies the s1 value of all synchronize in pri-table. 0: qlUnknown, 2: qlPrc, 4: qlSsua, 8: qlSsub, 11: qlSec, 15: qlDnu
Enumeration
Enumerated Values:
0qlUnknown
2qlPrc
4qlSsua
8qlSsub
11qlSec
15qlDnu
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.5
optixSdhSysSynSubNet
This parameter specifies the sub net id. Value range: 0 to 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.6
optixSdhSysSynNodeID
This parameter specifies the node id. Value range: 0x00 to 0x0f.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.48.1.2.1.7