OPTIX-SDH-LMSP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
110

optixSdhLmspgTable

table
.1.3.6.1.4.1.2011.2.25.4.10.41.5.1 · 1 row entry · 106 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSdhLmspgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-LMSP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-LMSP-MIB::optixSdhLmspgTable' 
This table describes the LMSP group configurations.
optixSdhLmspgEntry row .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1
This entry describes the LMSP group configurations.
Indexes
Column Syntax OID
optixSdhLmspgid
This object indicates the LMSP group ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.1
optixSdhLmspProtectType
This object indicates the LMSP protection type. 0: 1+1 protection, 1: 1:N protection
Enumerationr/w
Enumerated Values:
0snmp1j1
1snmp1pn
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.2
optixSdhLmspWorkChnNum
This object indicates the number of LMSP working channels. Value range: 1 to 14.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.3
optixSdhLmspRevertMode
This object indicates the LMSP revertive mode. 0: non-revertive, 1: revertive
Enumerationr/w
Enumerated Values:
0norvt
1rvt
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.4
optixSdhLmspOpMode
This object indicates the single-/dual-ended flag of the LMSP group. 0: single-ended, 1: dual-ended
Enumerationr/w
Enumerated Values:
0uniend
1biend
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.5
optixSdhLmspActiveFlag
This object indicates the LMSP activation flag. 0x01: to be added, 0x02: to be deleted, 0x03: activiated
Enumeration
Enumerated Values:
1adding
2deleting
3active
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.6
optixSdhLmspWtrTime
This object indicates the WTR time of the LMSP group. Value range: 6 to 720 (unit: s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.7
optixSdhLmspSdEnable
This object indicates the enable status of the LMSP SD switching. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.8
optixSdhLmspSwitchReq
This object indicates the LMSP switching request. 0: lpsNr, 16: lpsDnr, 64: lpsExer, 96: lpsWtr, 128: lpsMs, 160: lpsSdLow, 176: lpsSd, 192: lpsSfLow, 208: lpsSf, 224: lpsFs, 240: lpsLp
Enumeration
Enumerated Values:
0lpsNr
16lpsDnr
64lpsExer
96lpsWtr
128lpsMs
160lpsSdLow
176lpsSd
192lpsSfLow
208lpsSf
224lpsFs
240lpsLp
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.9
optixSdhLmspSwitchSta
This object indicates the LMSP switching status. 0: stop(0), 1: i, 4: s, 255: starting
Enumeration
Enumerated Values:
0stop
1i
4s
255starting
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.10
optixSdhLmspHoldOffTime
This object indicates the LMSP switching delay time. Value range: 0 to 100 (unit: 100 ms). If there is no delay time, the returned value is 0.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.11
optixSdhLmspK2Mode
This object indicates the last three bits of the K2 byte of the LMSP group, which represents the single-/dual-ended mode. 0: noindicate, 1: indicate
Enumerationr/w
Enumerated Values:
0noindicate
1indicate
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.12
optixSdhLmspKLevel
This object indicates the priority level of the SF and SD in the K byte. 0: kHigh, 1: kLow
Enumerationr/w
Enumerated Values:
0kHigh
1kLow
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.13
optixSdhLmspProtocolType
This object indicates the protocol type of the LMSP group. 0: old, 1: new, 2: restruct, 3: transoceanic
Enumerationr/w
Enumerated Values:
0old
1new
2restruct
3transoceanic
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.14
optixSdhLmspuid0
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.15
optixSdhLmspBid0
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.16
optixSdhLmspSubid0
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.17
optixSdhLmspPortid0
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.18
optixSdhLmspAu4Map0
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.19
optixSdhLmspReqSite0
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.20
optixSdhLmspuid1
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.21
optixSdhLmspBid1
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.22
optixSdhLmspSubid1
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.23
optixSdhLmspPortid1
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.24
optixSdhLmspAu4Map1
This object indicates the LMSP group Au4 mapping. The value is determined by the line board.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.25
optixSdhLmspReqSite1
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.26
optixSdhLmspuid2
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.27
optixSdhLmspBid2
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.28
optixSdhLmspSubid2
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.29
optixSdhLmspPortid2
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.30
optixSdhLmspAu4Map2
This object indicates the LMSP group Au4 mapping. The value is determined by the line board
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.31
optixSdhLmspReqSite2
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.32
optixSdhLmspuid3
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.33
optixSdhLmspBid3
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.34
optixSdhLmspSubid3
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.35
optixSdhLmspPortid3
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.36
optixSdhLmspAu4Map3
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.37
optixSdhLmspReqSite3
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.38
optixSdhLmspuid4
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.39
optixSdhLmspBid4
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.40
optixSdhLmspSubid4
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.41
optixSdhLmspPortid4
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.42
optixSdhLmspAu4Map4
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.43
optixSdhLmspReqSite4
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.44
optixSdhLmspuid5
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.45
optixSdhLmspBid5
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.46
optixSdhLmspSubid5
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.47
optixSdhLmspPortid5
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.48
optixSdhLmspAu4Map5
This object indicates the LMSP group Au4 mapping. The value is determined by the line board.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.49
optixSdhLmspReqSite5
This object indicates the LMSP remote/local end.
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.50
optixSdhLmspuid6
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.51
optixSdhLmspBid6
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.52
optixSdhLmspSubid6
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.53
optixSdhLmspPortid6
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.54
optixSdhLmspAu4Map6
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.55
optixSdhLmspReqSite6
This object indicates the LMSP remote/local end.
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.56
optixSdhLmspuid7
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.57
optixSdhLmspBid7
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.58
optixSdhLmspSubid7
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.59
optixSdhLmspPortid7
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.60
optixSdhLmspAu4Map7
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.61
optixSdhLmspReqSite7
This object indicates the LMSP remote/local end.
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.62
optixSdhLmspuid8
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.63
optixSdhLmspBid8
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.64
optixSdhLmspSubid8
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.65
optixSdhLmspPortid8
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.66
optixSdhLmspAu4Map8
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.67
optixSdhLmspReqSite8
This object indicates the LMSP remote/local end.
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.68
optixSdhLmspuid9
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.69
optixSdhLmspBid9
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.70
optixSdhLmspSubid9
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.71
optixSdhLmspPortid9
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.72
optixSdhLmspAu4Map9
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.73
optixSdhLmspReqSite9
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.74
optixSdhLmspuid10
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.75
optixSdhLmspBid10
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.76
optixSdhLmspSubid10
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.77
optixSdhLmspPortid10
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.78
optixSdhLmspAu4Map10
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.79
optixSdhLmspReqSite10
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.80
optixSdhLmspuid11
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.81
optixSdhLmspBid11
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.82
optixSdhLmspSubid11
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.83
optixSdhLmspPortid11
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.84
optixSdhLmspAu4Map11
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.85
optixSdhLmspReqSite11
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.86
optixSdhLmspuid12
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.87
optixSdhLmspBid12
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.88
optixSdhLmspSubid12
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.89
optixSdhLmspPortid12
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.90
optixSdhLmspAu4Map12
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.91
optixSdhLmspReqSite12
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.92
optixSdhLmspuid13
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.93
optixSdhLmspBid13
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.94
optixSdhLmspSubid13
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.95
optixSdhLmspPortid13
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.96
optixSdhLmspAu4Map13
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.97
optixSdhLmspReqSite13
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.98
optixSdhLmspuid14
This object indicates the LMSP protection unit ID. Value range for RTN 980: 0 to 7. Value range for RTN 950: 0 to 4.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.99
optixSdhLmspBid14
This object indicates the slot ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.100
optixSdhLmspSubid14
This object indicates the subboard ID of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.101
optixSdhLmspPortid14
This object indicates the port number of the LMSP group. The value is determined by the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.102
optixSdhLmspAu4Map14
This object indicates the LMSP group Au4 mapping.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.103
optixSdhLmspReqSite14
This object indicates the LMSP remote/local end. 1: near, 2: far
Enumeration
Enumerated Values:
1near
2far
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.104
optixSdhLmspStartFlag
This object indicates the start flag of the LMSP group. 0: protocolStop, 1: protocolStart
Enumerationr/w
Enumerated Values:
0protocolStop
1protocolStart
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.105
optixSdhLmspgRowStatus
This object indicates the row status of the LMSP group.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.1.1.255

optixSdhLmspuTable

table
.1.3.6.1.4.1.2011.2.25.4.10.41.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSdhLmspuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-LMSP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-LMSP-MIB::optixSdhLmspuTable' 
This table describes the configurations of LMSP protocol units.
optixSdhLmspuEntry row .1.3.6.1.4.1.2011.2.25.4.10.41.5.2.1
This entry describes the configurations of LMSP units
Indexes
Column Syntax OID
optixSdhLmspuid
This object indicates the ID of LMSP unit
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.2.1.1
optixSdhLmspuExtSwitchCmd
This object indicates the external switching cmd of protocol unit ID. 15: lmsLock, 31: lmsUnlock, 14: lmsForce, 30: lmsForceclr, 8: lmsMan, 24: lmsManclr, 4: lmsExer, 20: lmsExerclr, 16: lmsClearall, 22: lmsClearwtr, 5:…
Enumerationr/w
Enumerated Values:
0lmsInvalid
4lmsExer
5lmsLockwork
8lmsMan
14lmsForce
15lmsLock
16lmsClearall
20lmsExerclr
21lmsUnlockwork
22lmsClearwtr
24lmsManclr
30lmsForceclr
31lmsUnlock
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.2.1.2
optixSdhLmspuSwitchRequest
This object indicates the switching request of protocol unit ID. 0: lpsNr, 16: lpsDnr, 64: lpsExer, 96: lpsWtr, 128: lpsMs, 160: lpsSdLow, 176: lpsSd, 192: lpsSfLow, 208: lpsSf, 224: lpsFs, 240: lpsLp
Enumeration
Enumerated Values:
0lpsNr
16lpsDnr
64lpsExer
96lpsWtr
128lpsMs
160lpsSdLow
176lpsSd
192lpsSfLow
208lpsSf
224lpsFs
240lpsLp
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.2.1.3
optixSdhLmspuSwitchState
This object indicates the LMSP switching status of protocol unit ID. 0: stop(0), 1: i, 4: s, 255: starting
Enumeration
Enumerated Values:
0stop
1i
4s
255starting
 .1.3.6.1.4.1.2011.2.25.4.10.41.5.2.1.4