OPTIX-SDH-EOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
24

optixEowTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixEowTable' 
This table describes the basicorderwire configurations.
optixEowEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1
Thisentry describes the basic orderwire configurations.
Indexes
Column Syntax OID
optixEowTelLen
This object indicates the length (range 3 to 8) of the orderwire call number
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.1
optixEowReqTime
This object indicates the call waiting time. Value range: 1 to 9.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.2
optixEowE1orE2Byte
This parameter indicates the E1/E2 bytes selective receiving of orderwires. 0: E1 1: E2
Enumerationr/w
Enumerated Values:
0e1
1e2
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.3
optixEowMeetNum
This object indicates the meet number (range 100 to 99999999) of which the value depends on tellen
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.4
optixEowGroupTelNum
This object indicates the group telphone number. This parameter takes a fixed value of 888.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.5
optixEowSubnetLen
This object indicates the subnet ID length. Value range: 1 or 2.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.1.1.6

optixEowTelTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEowTelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixEowTelTable' 
This table describes the basiccall configurations.
optixEowTelEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.2.1
Thisentry describes the basic call configurations.
Indexes
Column Syntax OID
optixEowTelNum
This object indicates the numbersequence. Value range: 1 to N. RTN equipment supports only 1.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.2.1.1
optixEowTelNumber
This object indicates the phone number. Value range: 100 to 9999999.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.2.1.2

optixEowSubnetTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.3 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEowSubnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixEowSubnetTable' 
This table describes the basicsubnet configurations.
optixEowSubnetEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.3.1
Thisentry describes the basic subnet configurations.
Indexes
Column Syntax OID
optixEowSubnetId
This object indicates the subnet ID, which must be a hexademical number that ranges from 0x01 to 0x99, and consists of only digits 0 to 9 but no characters A to F
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.3.1.1

optixEowPortUsedTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEowPortUsedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixEowPortUsedTable' 
This table describes the basic configurations ofport usage.
optixEowPortUsedEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.4.1
Thisentry describes the basic configurations of port usage.
Indexes
Column Syntax OID
optixEowIuBid
This object indicates the slot ID and board ID of the common service management line board
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.4.1.1
optixEowLineUsed
This object indicates the optical port usage information. 0: unused, 1: used
Enumerationr/w
Enumerated Values:
0unused
1used
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.4.1.2
optixEowMeetLineUsed
This object indicates the meet optical port usage information. 0: unused, 1: used
Enumerationr/w
Enumerated Values:
0unused
1used
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.4.1.3

optixDataPortTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.5 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDataPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixDataPortTable' 
Thistable describes the basicbroadcast data port configurations.
optixDataPortEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.5.1
Thisentry describes the basic broadcast data port configurations.
Indexes
Column Syntax OID
optixDataPortOhSlot
This object indicates the overhead byte. Serial1 to Serial4. Value range: 1 to 4.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.5.1.1
optixDataPortSlavePortId
This object indicates the slave port number of broadcast data. The value is determined by the slot ID and port ID of the line board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.5.1.2
optixDataPortMainPortId
This object indicates themaster port number of broadcast data. The value is determined by the slot ID and port ID of the line board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.5.1.3
optixDataPortSlavePortNum
This object indicates the number of slave ports of broadcast data.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.5.1.4

optixF1PortTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixF1PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixF1PortTable' 
This table describes the basicF1 portconfigurations.
optixF1PortEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.6.1
This entry describes the basic F1 port configurations.
Indexes
Column Syntax OID
optixF1PortId
This object indicates the F1 port number that ranges 1 to 7
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.6.1.1
optixF1PortInputPort
This object indicates the upstream port of the F1 port. The value is determined by the slot ID and port ID of the line board. This parameter can also take the value of 0xff00.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.6.1.2
optixF1PortOutputPort
This object indicates the downstream port of the F1 port. The value is determined by the slot ID and port ID of the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.6.1.3

optixDataPortEXTTable

table
.1.3.6.1.4.1.2011.2.25.4.10.50.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDataPortEXTTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-SDH-EOW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-SDH-EOW-MIB::optixDataPortEXTTable' 
Thistable describes the basicbroadcast data port configurations.
optixDataPortEXTEntry row .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1
Thisentry describes the basic broadcast data port configurations.
Indexes
Column Syntax OID
optixEXTDataPortOhSlot
This object indicates the overhead byte. Serial1 to Serial4. Value range: 1 to 4.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1.1
optixEXTDataPortMainPortId
This object indicates themaster port number of broadcast data. The value is determined by the slot ID and port ID of the line board.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1.2
optixEXTDataPortSlavePortNum
This object indicates the number of slave ports of broadcast data. Value range: 1 to N. RTN equipment supports only 1.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1.3
optixEXTDataPortSlavePortId
This object indicates the slave port number of broadcast data. The value is determined by the slot ID and port ID of the line board.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1.4
optixEXTDataPortRowStatus
This object indicates the RowStatus of broadcast data.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.10.50.1.7.1.255