OPTIX-PW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
185

optixStaticUcEthPWTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.2 · 1 row entry · 27 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixStaticUcEthPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixStaticUcEthPWTable' 
This table implements the configurations of static unicast ETH PWs, including the PW type, label, tunnels carried on the PW, CW, VCCV, and applied VLAN.
optixStaticUcEthPWEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1
This entry indicates the parameter table of the static unicast ETH PWs.
Indexes
Column Syntax OID
optixEthPWIndex
This object indicates the PW index, ranging from 1 to 0x00ffffff,0 means auto.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.1
optixEthPWtype
This object indcates the PW type. 0x0004: eth-tag 0x0005: eth-raw
Enumerationr/w
Enumerated Values:
4ethtag
5ethraw
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.2
optixEthPWId
This object indicates the PW ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.3
optixEthPWDirection
This object indicates the PW direction. 1: bi 2: uni
Enumerationr/w
Enumerated Values:
1bi
2uni
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.4
optixEthPWPosition
This object indicates the node location. 0: null 1: ingress 2: egress
Enumerationr/w
Enumerated Values:
0null
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.5
optixEthPWInLabel
This object indicates the ingress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.6
optixEthPWOutLabel
This object indicates the egress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.7
optixEthPWPeerIp
This object indicates the peer IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.8
optixEthPWTunnelIndex
This object indicates the index to the tunnel carried through the PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.9
optixEthPWVccvctrlChnlType
This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl
Enumerationr/w
Enumerated Values:
0none
1cw
2alertlabel
4cwaltlb
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.10
optixEthPWVccvCheckType
This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd
Enumerationr/w
Enumerated Values:
0none
1ping
2bfd
3pingbfd
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.11
optixEthPWCtrlWord
This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use
Enumerationr/w
Enumerated Values:
1notuse
2fstuse
3mstuse
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.12
optixEthPWExp
This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: The EXP value is invalid.
Unsigned32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.13
optixEthPWLspMode
This object indicates the LSP mode.(Only the downstreamLSP is supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.)
Enumerationr/w
Enumerated Values:
1uniform
2pipe
255none
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.14
optixEthPWEnable
This object indicates the enable status of the PW. 0: disable 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.15
optixEthPWIngressIdBoundEgrTnl
This object indicates the source node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.16
optixEthPWEgressIdBoundEgrTnl
This object indicates the sink node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.17
optixEthPWTunnelIdBoundEgrTnl
This object idnicates the bound egress tunnel ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.18
optixEthPWEncapsulateVlanId
When ETH services are carried through Ethernet tagged PWs, service VLAN must be added before the service payloads. This object is used to specify the VLAN ID.Valid values: 1-4095. 0xffff: The VLAN ID is not specified.
Unsigned32r/w
Constraints:
range: 65535-65535
range: 1-4094
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.19
optixEthPWCheckRet
This object indicates the PW check result.
Enumeration
Enumerated Values:
0normal
1abnormal
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.20
optixEthPWSrvType
This object indicates the type of the service carried by the PW.
Enumeration
Enumerated Values:
1ces
2atmPwe3
3eLine
4eLan
5eAggr
6eTree
7mirror
8msPw
9ptp1588
10top
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.21
optixEthPWSrvIndex
This object indicates the index to the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.22
optixEthPWSrvID
This object indicates the ID of the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.23
optixEthPWLocalState
This object indicates the local state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.24
optixEthPWRemoteState
This object indicates the remote state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.25
optixEthPWState
This object indicates the PW state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.26
optixEthPWRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.2.1.255

optixStaticUcAtmPWTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.3 · 1 row entry · 28 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixStaticUcAtmPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixStaticUcAtmPWTable' 
This table implements the configurations of static unicastATM PWs, including PW type, label, tunnels carried on the PW, CW, VCCV, and ATM concatenation.
optixStaticUcAtmPWEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1
This entry indicates the parameter table of the static unicastATM PWs.
Indexes
Column Syntax OID
optixAtmPWIndex
This object indicates the PW index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.1
optixAtmPWtype
This object indcates the PW type. 0x0003: atm-trans 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-1to1-vpc
Enumerationr/w
Enumerated Values:
3atmtrans
9atmnto1vcc
10atmnto1vpc
12atm1to1vcc
13atm1to1vpc
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.2
optixAtmPWId
This object indicates the PW ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.3
optixAtmPWDirection
This object indicates the PW direction. 1: bi 2: uni
Enumerationr/w
Enumerated Values:
1bi
2uni
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.4
optixAtmPWPosition
This object indicates the node location. 0: null 1: ingress 2: egress
Enumerationr/w
Enumerated Values:
0null
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.5
optixAtmPWInLabel
This object indicates the ingress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.6
optixAtmPWOutLabel
This object indicates the egress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.7
optixAtmPWPeerIp
This object indicates the peer IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.8
optixAtmPWTunnelIndex
This object indicates the index to the tunnel carried through the PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.9
optixAtmPWVccvctrlChnlType
This object indicates the control channel type. 0: none 1: cw 2: alertlabel 4: ttl
Enumerationr/w
Enumerated Values:
0none
1cw
2alertlabel
3ttl
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.10
optixAtmPWVccvCheckType
This object indicates the verification mode. 0: none 1: ping 2: bfd
Enumerationr/w
Enumerated Values:
0none
1ping
2bfd
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.11
optixAtmPWCtrlWord
This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use
Enumerationr/w
Enumerated Values:
1notuse
2fstuse
3mstuse
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.12
optixAtmPWExp
This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none
Unsigned32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.13
optixAtmPWLspMode
This object indicates the LSP mode.(Only the downstream LSPis supported.) 1: uniform 2: pipe 255: none (The LSP mode is invalid upstream.)
Enumerationr/w
Enumerated Values:
1uniform
2pipe
255none
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.14
optixAtmPWEnable
This object indicates the enable status of the PW. 0: disable 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.15
optixAtmPWIngressIdBoundEgrTnl
This object indicates the source node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.16
optixAtmPWEgressIdBoundEgrTnl
This object indicates the sink node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.17
optixAtmPWTunnelIdBoundEgrTnl
Thisobject indicates the bound egress tunnel ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.18
optixAtmPWMaxCellNum
This object indicates the maximum number of concatenate ATM cells. Valid values range from 1 to 31. 1: The ATM concatenation is disabled.
Unsigned32r/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.19
optixAtmPWMaxLoadTime
This object indicates the longest waiting time for ATM concatenation. Valid values:100-50000. 0: The ATM concatenation is disabled. Unit:us; step: 100.
Unsigned32r/w
Constraints:
range: 10-50000
range: 0-0
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.20
optixAtmPWCheckRet
This object indicates the PW check result.
Enumeration
Enumerated Values:
0normal
1abnormal
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.21
optixAtmPWSrvType
This object indicates the type of the service carried by the PW.
Enumeration
Enumerated Values:
1ces
2atmPwe3
3eLine
4eLan
5eAggr
6eTree
7mirror
8msPw
9ptp1588
10top
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.22
optixAtmPWSrvIndex
This object indicates the index to the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.23
optixAtmPWSrvID
This object indicates the ID of the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.24
optixAtmPWLocalState
This object indicates the local state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.25
optixAtmPWRemoteState
This object indicates the remote state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.26
optixAtmPWState
This object indicates the PW state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.27
optixAtmPWRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.3.1.255

optixStaticUcCesPWTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.4 · 1 row entry · 35 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixStaticUcCesPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixStaticUcCesPWTable' 
This table implements the PW configurations of the static unicast CES service. These configurations include thePW type, label, tunnels carried by the PW, CW, VCCV, SDH emulation level, enable status of the RTP header, packet loading time, and jitter buffer time.
optixStaticUcCesPWEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1
This entry indicates the parameter table of the static unicast CES PWs.
Indexes
Column Syntax OID
optixCesPWIndex
This object indicates the PW index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.1
optixPCesPWtype
This object indcates the PW type. 0x0011: satop-e1 0x0015: cesopsn 0x0010: cep
Enumerationr/w
Enumerated Values:
16cep
17satop
21cesopsn
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.2
optixCesPWId
This object indicates the PW ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.3
optixCesPWDirection
This object indicates the PW direction. 1: bi 2: uni}
Enumerationr/w
Enumerated Values:
1bi
2uni
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.4
optixCesPWPosition
This object indicates the node location. 0: null 1: ingress 2: egress
Enumerationr/w
Enumerated Values:
0null
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.5
optixCesPWInLabel
This object indicates the ingress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.6
optixCesPWOutLabel
This object indicates the egress label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.7
optixCesPWPeerIp
This object indicates the peer IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.8
optixCesPWTunnelIndex
This object indicates the index to the tunnel carried through the PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.9
optixCesPWVccvctrlChnlType
This object indicates the control channel type. 0: none 1: cw 2: alertlabel 3: cwaltlb 4: ttl
Enumerationr/w
Enumerated Values:
0none
1cw
2alertlabel
3ttl
4cwaltlb
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.10
optixCesPWVccvCheckType
This object indicates the verification mode. 0: none 1: ping 2: bfd 3 :pingbfd
Enumerationr/w
Enumerated Values:
0none
1ping
2bfd
3pingbfd
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.11
optixCesPWCtrlWord
This object indicates the usage policy of the control word. 1: not-use 2: frt-use 3: mst-use
Enumerationr/w
Enumerated Values:
1notuse
2fstuse
3mstuse
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.12
optixCesPWExp
This object indicates the EXP value. (Only upstream EXPs are supported.) Valid values:0-7. 0xff: none
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.13
optixCesPWLspMode
This object indicates the LSP mode.(Only the downstream LSP is supported.) 1: uniform 2: pipe 255: none (the LSP mode is invalid upstream.)
Enumerationr/w
Enumerated Values:
1uniform
2pipe
255none
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.14
optixCesPWEnable
This object indicates the enable status of the PW. 0: disable 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.15
optixCesPWIngressIdBoundEgrTnl
This object indicates the source node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.16
optixCesPWEgressIdBoundEgrTnl
This object indicates the sink node ID of the bound egress tunnel.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.17
optixCesPWTunnelIdBoundEgrTnl
This object indicates the bound egress tunnel ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.18
optixCesPWRtpHead
This object indicates the enable status of the RTP header encapsulation. 0: disable 1: enablehwrtp 2: enablestdrtp
Enumerationr/w
Enumerated Values:
0disable
1ablehwrtp
2enablestdrtp
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.19
optixCesPWLoadTime
This object indicates the packet loading time. Valid values: 125-5000 us; step: 125
Unsigned32r/w
Constraints:
range: 125-5000
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.20
optixCesPWJitterTime
This object indicates the jitter buffer time. Valid values: 125-64000 us; step: 125
Unsigned32r/w
Constraints:
range: 125-64000
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.21
optixCesPWEmulLevel
This object indicates the CES emulation level. 1: vc12 2: vc11 3: vc4 4: vc4 (3 x vc3)
Enumerationr/w
Enumerated Values:
1vc12
2vc11
3vc4
4triplicatevc3
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.22
optixCesPWPathNum
This object indicates the number of valid timeslots/channels. E1: 1-32; T1: 1-24; VC4: 1; VC4 (3 x VC3):3
Unsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.23
optixCesPWSNMode
This object indicates the serial-number mode. 0: stdmode; valid values range from 0 to 65535 and restart from 0. 1: hwmode; valid values range form 0 to 65535 and restart from 1.
Enumerationr/w
Enumerated Values:
0stdmode
1hwmode
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.24
optixCesPWLMREnable
This object indicates the processing status of the L, M, and R bits. 0: disable 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.25
optixCesPWInRbit
This object indicates the threshold for entering the R bit insertion status. Valid values: 1-65535.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.26
optixCesPWOutRbit
Thisobject indicates the threshold forexiting the R bit insertion status. Valid values: 1-65535.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.27
optixCesPWCheckRet
This object indicates the PW check result.
Enumeration
Enumerated Values:
0normal
1abnormal
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.28
optixCesPWSrvType
This object indicates the type of the service carried by the PW.
Enumeration
Enumerated Values:
1ces
2atmPwe3
3eLine
4eLan
5eAggr
6eTree
7mirror
8msPw
9ptp1588
10top
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.29
optixCesPWSrvIndex
This object indicates the index to the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.30
optixCesPWSrvID
This object indicates the ID of the service carried by the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.31
optixCesPWLocalState
This object indicates the local state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.32
optixCesPWRemoteState
This object indicates the remote state of the PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.33
optixCesPWState
This object indicates the PW state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.34
optixCesPWRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.4.1.255

optixPWCrossTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.5 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWCrossTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixPWCrossTable' 
This table is used to query the actual PW cross-connect and forwarding paths. One PW has two cross-connections, forward and backward.
optixPWCrossEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1
This entry is used to query the parameter table for actual PW cross-connections.
Indexes
Column Syntax OID
optixPWIndex
This object indicates the PW index, ranging from 1 to 0x00ffffff.
Unsigned32
Constraints:
range: 1-16777215
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.1
optixPWCrossdirection
This object indicates the cross-connect direction. 1: forward 2: backward
Enumeration
Enumerated Values:
1posit
2minus
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.2
optixPWCrossType
This object indcates the PW type. 0x0003: atm-trans 0x0004: eth-tag 0x0005: eth-raw 0x0009: atm-nto1-vcc 0x000A: atm-nto1-vpc 0x000C: atm-1to1-vcc 0x000D: atm-1to1-vpc 0x0011: satop-e1 0x0015: cesopsn 0x0010: cep 0x1001…
Enumeration
Enumerated Values:
3atmtrans
4ethtag
5ethraw
9atmnto1vcc
10atmnto1vpc
12atm1to1vcc
13atm1to1vpc
16cep
17satop
21cesopsn
4097ip
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.4
optixPWCrossPWId
This object indicates the PW ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.5
optixPWCrossPWGroupId
This object indicates the group ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.6
optixPWCrossPeerIp
This object indicates the peer IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.7
optixPWCrossSingalType
This object indicates the signaling type. 1: static; 2: dynamic LDP
Enumeration
Enumerated Values:
1static
2ldp
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.8
optixPWCrossPosition
This object indicates the node location. 0: null, 1: ingress, 2: egress
Enumeration
Enumerated Values:
0null
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.9
optixPWCrossCtrlWord
This object indicates the control word type. 1: notuse, 2: fstuse, 3: mstuse
Enumeration
Enumerated Values:
1notuse
2fstuse
3mstuse
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.10
optixPWCrossVccvctrlChnlType
This object indicates the VCCV control channel type. 0: none, 1: cw, 2: alertlabel, 3: ttl
Enumeration
Enumerated Values:
0none
1cw
2alertlabel
3ttl
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.11
optixPWCrossVccvCheckType
This object indicates the VCCV verification mode. 0: none, 1: ping, 2: bfd
Enumeration
Enumerated Values:
0none
1ping
2bfd
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.12
optixPWCrossInLabel
This object indicates the ingress label. The forward cross-connection value is 0xffffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.13
optixPWCrossOutLabel
This object indicates the ingress label. The backward cross-connection value is 0xffffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.14
optixPWCrossTunnelIngressId
This object indicates the ingress tunnel ID to which the PW belongs.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.15
optixPWCrossTunnelEgressId
This object indicates the egress tunnel ID to which the PW belongs.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.16
optixPWCrossTunnelId
This object indicates the tunnel ID to which the PW belongs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.17
optixPWCrossTunnelType
This object indicates the type of the tunnel to which the PW belongs. 0: mpls 1: pbt 2: ip 3: gre
Enumeration
Enumerated Values:
0mpls
1pbt
2ip
3gre
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.18
optixPWCrossActiveStaus
This object indicates the activation status of the PW cross-connection. 0: deactive 1: active
Enumeration
Enumerated Values:
0noactive
1active
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.5.1.19

optixDynLdpPWTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.6 · 1 row entry · 16 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDynLdpPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixDynLdpPWTable' 
This table implements the configurations of a dynamic PW.
optixDynLdpPWEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1
This node describes an entity of the dynamic PW parameter table.
Indexes
Column Syntax OID
optixDynLdpPWIndex
This object describes the index of a dynamic PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.1
optixDynLdpPWtype
This object describes the type of a dynamic PW.
Enumerationr/w
Enumerated Values:
3atmtrans
4ethtag
5ethraw
9atmnto1vcc
10atmnto1vpc
12atm1to1vcc
13atm1to1vpc
17satope1
21cesopsnbas
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.2
optixDynLdpPWId
This object describes the ID of a dynamic PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.3
optixDynLdpPWDirection
This object describes the direction of a dynamic PW.
Enumerationr/w
Enumerated Values:
1bi
2uni
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.4
optixDynLdpPWPosition
This object describes the node location of a dynamic PW. 0: null 1: ingress 2: egress
Enumerationr/w
Enumerated Values:
0null
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.5
optixDynLdpPWInLabel
This object describes the ingress label of a dynamic PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.6
optixDynLdpPWOutLabel
This object describes the egress label of a dynamic PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.7
optixDynLdpPWPeerIp
This object describes the peer IP address of a dynamic PW.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.8
optixDynLdpPWTunnelIndex
This object describes the index to the tunnel carried over the PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.9
optixDynLdpPWCWEn
This object describes whether to enable the control word of the VCCV.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.10
optixDynLdpPWCCType
This object describes the control channel type of the VCCV.
Enumeration
Enumerated Values:
0none
1cw
2altlb
3ttl
4cwaltlb
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.11
optixDynLdpPWCVType
This object describes the check mode of the VCCV.
Enumeration
Enumerated Values:
0none
1ping
2bfd
3pingbfd
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.12
optixDynLdpPWATMCellNum
This object describes the actual number of cascaded ATM cells of a dynamic PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.13
optixDynLdpPWCESRTP
This object describes whether the RTP header encapsulation is enabled on a dynamic PW.
Enumeration
Enumerated Values:
0disable
1enablehwrtp
2enablestdrtp
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.14
optixDynLdpPWErrCode
This object describes the error code of a dynamic pw. 57385:MTU negotiation failure between local end and remote end, 57386:Control word mode negotiation failure between local end and remote end, 57387:RTP enable/disabl…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.15
optixDynLdpPWRowStatus
This object describes the row status. 1: active 4: createAndGo 6: destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.6.1.255

optixDynPWBFDTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.7 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDynPWBFDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixDynPWBFDTable' 
This table implements the configurations of a BFD session for dynamic PWs.
optixDynPWBFDEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1
This entry describes an entity of the BFD session parameter table.
Indexes
Column Syntax OID
optixDynPWBFDSessionName
This object describes the name of a BFD session.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.1
optixDynPWBFDLocalMark
This object describes the local label of a BFD session.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.2
optixDynPWBFDRemoteMark
This object describes the remote label of a BFD session.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.3
optixDynPWBFDPeerIP
This object describes the sink IP address of a BFD session.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.4
optixDynPWBFDAutoCalc
This object describes whether the auto calculation of the number of PW hops is enabled.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.5
optixDynPWBFDTTL
This object describes the number of PW hops detected in a BFD session.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.6
optixDynPWBFDSessionType
This object describes the type of a BFD session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.7
optixDynPWBFDMinRxInterval
This object describes the minimum interval expected by the NE to receive BFD packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.8
optixDynPWBFDMinTxInterval
This object describes the minimum interval expected by the NE to transmit BFD packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.9
optixDynPWBFDMultiplier
This object describes the local detection multiplier for the BFD session.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.10
optixDynPWBFDTosExp
This object describes the priority of a BFD packet.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.11
optixDynPWBFDWtr
This object describes the wait-to-recovery time for the BFD session.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.12
optixDynPWBFDShutdown
This object describes the BFD session testing status.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.13
optixDynPWBFDState
This object describes the status of a BFD session.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.14
optixDynPWBFDRowStatus
This object describes the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.7.1.255

optixDynPWREDDYTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.1.8 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDynPWREDDYTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixDynPWREDDYTable' 
This table implements the configurations of a redundancy group for dynamic PWs.
optixDynPWREDDYEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1
This entry describes the parameter table of a redundancy group.
Indexes
Column Syntax OID
optixDynPWREDDYIndex
This object describes the index of a PW redundancy group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.1
optixDynPWREDDYProtectType
This object describes the protection type of a PW redundancy group.
Enumerationr/w
Enumerated Values:
1oneplusone
2onetoone
3bfdfrr1to1
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.2
optixDynPWREDDYMem1PW
This object describes the PW1, a member of the PW redundancy group.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.3
optixDynPWREDDYPW1State
This node describes the forwarding status of PW1, a member of the PW redundancy group.
Enumeration
Enumerated Values:
0forwarding
1unforwarding
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.4
optixDynPWREDDYMem2PW
This object describes PW2, another member of the PW redundancy group.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.5
optixDynPWREDDYPW2State
This node describes the forwarding status of PW2, another member of the PW redundancy protection group.
Enumeration
Enumerated Values:
0forwarding
1unforwarding
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.6
optixDynPWREDDYMode
This object describes the mode of a PW redundancy group.
Enumerationr/w
Enumerated Values:
0master
1independent
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.7
optixDynPWREDDYDualRecv
This object describes the dual receiving mode of a PW redundancy group.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.8
optixDynPWREDDYReroute
This object describes the PW switchback policy mode.
Enumerationr/w
Enumerated Values:
1delay
2never
3immediately
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.9
optixDynPWREDDYDelayTime
This object describes switchback delay time of a PW redundancy group.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.10
optixDynPWREDDYRowStatus
This object describes the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.1.8.1.255

optixMsPWTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixMsPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixMsPWTable' 
This table implements the configurations of MS-PWs, including the last/next segment PW index, name, MTU, types of services carried on the PW.
optixMsPWEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1
This entry indicates the MS PW parameter table.
Indexes
Column Syntax OID
optixMsPWIndex
This object indicates the MS-PW index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.1
optixMsPWid
This object indicates the MS-PW ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.2
optixMsPWForePwIndex
This object indicates the last segment PW index.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.3
optixMsPWBackPwIndex
This object indicates thenext segment PW index.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.4
optixMsPWMtu
This object indicates the MTU. If the last and next segment PWs are of ETH service type, the value ranges from 46-9000. Default value: 1500. If the last and next segment PWs are of ATM or CES service type. The value is …
Unsigned32r/w
Constraints:
range: 46-9000
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.5
optixMsPWName
This object indicates the MS-PW name, which is a character string, supporting a maximum of 64 bytes. No default value is configured. The name could be null, space, and chinese characters.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.6
optixMsPWServiceType
This object indicates the service type. 1: ces 2: atm 3: eth 4: ptp 5: top 6: ip 7: soh-cep 8: nosoh-cep
Enumerationr/w
Enumerated Values:
1ces
2atm
3eth
4ptp
5top
6ip
7sohcep
8nosohcep
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.7
optixMsPWForePwLocalState
This object indicates the local state of fore pw.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.8
optixMsPWForePwRemoteState
This object indicates the remote state of fore pw.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.9
optixMsPWForePwState
This object indicates the state of fore PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.10
optixMsPWBackPwLocalState
This object indicates the local state of back PW
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.11
optixMsPWBackPwRemoteState
This object indicates the remote state of back pw.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.12
optixMsPWBackPwState
This object indicates the state of back pw.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.13
optixMsPWRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.1.1.255

optixMsPWCrossTable

table
.1.3.6.1.4.1.2011.2.25.4.50.6.2.2 · 1 row entry · 21 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixMsPWCrossTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PW-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PW-MIB::optixMsPWCrossTable' 
This table is used to query the actual MS-PW cross-connect and forwarding paths and the cross-connection information of the last and next segment PWs are returned.
optixMsPWCrossEntry row .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1
This entry is used to query the parameter table for actual MS-PW cross-connections.
Indexes
Column Syntax OID
optixMsPWCrossIndex
This object indicates the MS-PW index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.1
optixMsPWCrossForePWXCId
This object indicates the ID of the cross-connection between the last segment and the next segment PWs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.2
optixMsPWCrossForePWType
This object indicates the last segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21: cesopsn, 16: cep, 4097: ip
Enumeration
Enumerated Values:
3atmtrans
4ethtag
5ethraw
9atmnto1vcc
10atmnto1vpc
12atm1to1vcc
13atm1to1vpc
16cep
17satop
21cesopsn
4097ip
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.3
optixMsPWCrossForePWId
This object indicates the last segment PW ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.4
optixMsPWCrossForePWInlabel
This object indicates the ingress label of the last segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.5
optixMsPWCrossBackPWOutlabel
This object indicates the egress label of the last segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.6
optixMsPWCrossBackPWTnlIngressId
This object indicates the ingress tunnel ID of the last segment PW.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.7
optixMsPWCrossBackPWTnlEgressId
This object indicates the egress tunnel ID of the last segment PW.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.8
optixMsPWCrossBackPWTnlId
This object indicates the tunnel ID of the last segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.9
optixMsPWCrossBackPWTunnelType
This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre
Enumeration
Enumerated Values:
0mpls
1pbt
2ip
3gre
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.10
optixMsPWCrossForePWActiveStaus
This object indicates the activation status of the cross-connection between the last segment and the next segment PWs. 0: noactive, 1: active
Enumeration
Enumerated Values:
0noactive
1active
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.11
optixMsPWCrossBackPWXCId
This object indicates the ID of the cross-connection between the next segment and thelast segment PWs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.12
optixMsPWCrossBackPWType
This object indicates thenext segment PW type. 4: ethtag, 5: ethraw, 3: atmtrans, 9: atmnto1vcc, 10: atmnto1vpc, 12: atm1to1vcc, 13: atm1to1vpc, 17: satop, 21: cesopsn, 16: cep, 4097: ip
Enumeration
Enumerated Values:
3atmtrans
4ethtag
5ethraw
9atmnto1vcc
10atmnto1vpc
12atm1to1vcc
13atm1to1vpc
16cep
17satop
21cesopsn
4097ip
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.13
optixMsPWCrossBackPWId
This object indicates the next segment PW ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.14
optixMsPWCrossBackPWInlabel
This object indicates the ingress label of thenext segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.15
optixMsPWCrossForePWOutlabel
This object indicates the egress label of the last segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.16
optixMsPWCrossForePWTnlIngressId
This object indicates the ingress tunnel ID of the last segment PW.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.17
optixMsPWCrossForePWTnlEgressId
This object indicates the egress tunnel ID of the last segment PW.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.18
optixMsPWCrossForePWTnlId
This object indicates the tunnel ID of the last segment PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.19
optixMsPWCrossForePWTunnelType
This object indicates the tunnel type of the last segment PW. 0: mpls, 1: pbt, 2: ip, 3: gre
Enumeration
Enumerated Values:
0mpls
1pbt
2ip
3gre
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.20
optixMsPWCrossBackPWActiveStaus
This object indicates the activation status of the cross-connection between thenext segment and the last segment PWs. 0: noactive, 1: active
Enumeration
Enumerated Values:
0noactive
1active
 .1.3.6.1.4.1.2011.2.25.4.50.6.2.2.1.21