OPTIX-PKT-PTPCLOCK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
79

optixPktPtpClockTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.1.22 · 1 row entry · 46 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPtpClockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktPtpClockTable' 
this table describes the configuration message of 1588 clock mode
optixPktPtpClockEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1
this entry describes the configuration message of 1588 clock mode
Indexes
Column Syntax OID
optixPktPtpClockPhyPortId
this parameter describes the physical ports ID of 1588 mode
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.1
optixPktPtpClockPortManState
this parameter describes the state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 5 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp
Enumerationr/w
Enumerated Values:
1initializing
2faulty
3disabled
4listening
5preMaster
6master
7passive
8uncalibrated
9slave
255snmp
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.2
optixPktPtpClockPortState
this parameter describes the enabled state of PTP clock port. 0 disable, 1 enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.3
optixPktPtpClockAnnounceCycle
this parameter describes the announce packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/1024s (1/128s) 4 16/1024s (1/64s) 5 …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.4
optixPktPtpClockSyncCycle
this parameter describes the SYNC packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/1024s (1/128s) 4 16/1024s (1/64s) 5 32/1…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.5
optixPktPtpClockDelayCycle
this parameter describes the DELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/1024s (1/128s) 4 16/1024s (1/64s) 5 32/…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.6
optixPktPtpClockPdelayCycle
this parameter describes the PDELAY packet period of PTP clock port. Value range 0 to 20. The mapping relationship is as follows 0 1/1024s 1 2/1024s (1/512s) 2 4/1024s (1/256s) 3 8/1024s (1/128s) 4 16/1024s (1/64s) 5 32…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.7
optixPktPtpClockAnnounceTimeout
This parameter describes the timeout interval of port announce diagram.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.8
optixPktPtpClockVlan
this parameter describes the VLAN value of PTP packet
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.9
optixPktPtpClockPrewiredPortState
this parameter describes the preselection status of PTP clock. 0 masterSlave, 1 master, 2 slave
Enumerationr/w
Enumerated Values:
0masterSlave
1master
2slave
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.10
optixPktPtpClockPEMode
this parameter describes the P/E mode of PTP clock. 1 p2p, 2 e2e
Enumerationr/w
Enumerated Values:
1p2p
2e2e
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.11
optixPktPtpClockHighBit
this parameter describes the high bit of received source PTP clock. Value range 1 to 0xfffffff. The defaut value is all Fs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.12
optixPktPtpClockLowBit
this parameter describes the low bit of received source PTP clock
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.13
optixPktPtpClockInterfaceNo
this parameter describes the interface NO of the PTP port that receive source clock. Value range 1 to 0xfffffff. The defaut value is all Fs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.14
optixPktPtpClockLinkState
this parameter describes the link state of the PTP port that receive source clock. 1 up, 0 down
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.15
optixPktPtpClockMsgFormat
this parameter describes the encapsulated format of PTP packeting. 1 ptpeth, 2 ptpip
Enumerationr/w
Enumerated Values:
1ptpeth
2ptpip
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.16
optixPktPtpClockRefClkIDHigh
this parameter describes the high bit of higher priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.17
optixPktPtpClockRefClkIDLow
this parameter describes the high bit of lower priority of PTP clock that for reference. Value range 1 to 0xffffffff. The default value is all Fs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.18
optixPktPtpClockRecClkNo
this parameter describes the interface NO of port that reveive clock. Value range 1 to 0xffff. The default value is all Fs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.19
optixPktPtpClockExtInterfaceMode
this parameter describes the PTP ports mode of external interface. 1 extClock, 2 extTime
Enumerationr/w
Enumerated Values:
1extclock
2exttime
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.20
optixPktPtpClockINorOUT
this parameter describes the direction(IN or OUT) of PTP clock port. 1 in, 2 out
Enumerationr/w
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.21
optixPktPtpClockTimeProtocolType
this parameter describes the protocol style of PTP clock. 1 dcls, 2 oneppsTime, 3 j211
Enumerationr/w
Enumerated Values:
1dcls
2oneppsTime
3j211
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.22
optixPktPtpClockElectricalLevel
this parameter describes the electrical level of PTP clock. 3 rs422, 255 snmpnull
Enumerationr/w
Enumerated Values:
3rs422
255snmpnull
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.23
optixPktPtpClockQulityOfTime
This parameter describes the time quality degree of a PTP clock.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.24
optixPktPtpClockPrecision
This parameter describes the time precision accuracy of a PTP clock.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.25
optixPktPtpClockSrcType
This parameter describes the type of the source PTP clock. 1 ATOMICCLOCK, 2 GPS, 3 TerrestrialRadio, 4 PTP, 5 NTP, 6 HANDSET, 7 OTHER, 8 Internaloscillator
Enumerationr/w
Enumerated Values:
1atomicClock
2gps
3terrestrialRadio
4ptp
5ntp
6handSet
7other
8internalOscillator
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.26
optixPktPtpClockPriority1
This parameter describes priority 1 of a PTP port. Value range: 0 to 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.27
optixPktPtpClockPriority2
This parameter describes priority 2 of a PTP port. Value range: 0 to 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.28
optixPktPtpClockRealState
this parameter describes the real state of PTP port. 1 initializing, 2 faulty, 3 disabled, 4 listening, 4 preMaster, 6 master, 7 passive, 8 uncalibrated, 9 slave, 255 snmp
Enumeration
Enumerated Values:
1initializing
2faulty
3disabled
4listening
5preMaster
6master
7passive
8uncalibrated
9slave
255snmp
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.29
optixPktPtpClockWarpMode
This parameter describes the divergence mode of a PTP port. 0: length; 1: time. The default value is length.
Enumerationr/w
Enumerated Values:
0length
1time
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.30
optixPktPtpClockWarpDirection
This parameter describes the divergence direction of a PTP port. 0: positive; 1: negative. The default value is positive.
Enumerationr/w
Enumerated Values:
0positive
1negative
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.31
optixPktPtpClockWarpValue
This parameter describes the divergence value of a PTP port. Value range for the length mode: 0 to 54000 (unit m).The default value is 0. Value range for the time mode 0 to 262143 (unit ns). The default value is 0.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.32
optixPktPtpClockStep
this parameter describes the ports PTP STEP mode. 1 ONESTEP, 2 TWOSTEP. The default value is ONESTEP. Note The FO supports only ONESTEP. That is, the GSP supports both modes. TWOSTEP returned by the product PSU fails.
Enumerationr/w
Enumerated Values:
1one
2two
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.33
optixPktPtpClockPortMode
this parameter describes the ports 1588 mode. 1 oc, 2 bc, 3 tc, 5 tcBc
Enumerationr/w
Enumerated Values:
1oc
2bc
3tc
5tcBc
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.34
optixPktPtpClockAcrState
this parameter describes the ports enable status of 1588 ACR. 0 disable, 1 enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.35
optixPktPtpClockTimeLevelMode
this parameter describes the time level of external time interface. 1 manual, 2 auto
Enumerationr/w
Enumerated Values:
1manual
2auto
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.36
optixPktPtpCableLengthDirRec
this parameter describes the received direction(IN or OUT) of external cable. 0 receive, 1 send
Enumerationr/w
Enumerated Values:
0receive
1send
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.37
optixPktPtpCableLengthModeRec
this parameter describes the received direction(IN or OUT) of external cable in in transmission length mode. 0 length, 1 time
Enumerationr/w
Enumerated Values:
0length
1time
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.38
optixPktPtpCableLengthValueRec
this parameter describes the received direction(IN or OUT) of external cable in length value
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.39
optixPktPtpCableLengthDirSend
this parameter describes the sent direction(IN or OUT) of external cable. 0 receive, 1 send
Enumerationr/w
Enumerated Values:
0receive
1send
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.40
optixPktPtpCableLengthModeSend
this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode. 0 length, 1 time
Enumerationr/w
Enumerated Values:
0length
1time
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.41
optixPktPtpCableLengthValueSend
this parameter describes the sent direction(IN or OUT) of external cable in transmission length mode
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.42
optixPktPtpPortVlanPri
this parameter describes Vlan Priority with the PTP message.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.43
optixPktPtpClockLocalPriority
This parameter describes the local priority of a PTP clock.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.44
optixPktPtpClockNotSlave
This parameter describes the NotSlave status of a PTP clock. 0: disable, 1: enable.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.45
optixPktPtpClockPortDmac
This parameter describes the destination MAC address of a PTP clock. mac011B19000000:01-1B-19-00-00-00,mac0180C200000E:01-80-C2-00-00-0E.
Enumerationr/w
Enumerated Values:
0mac011B19000000
1mac0180C200000E
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.22.1.46

optixPktPtpClockPLTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.1.25 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPtpClockPLTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktPtpClockPLTable' 
This table describes the configurations of the TC+OC port reference source priority list.
optixPktPtpClockPLEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.1.25.1
This entry describes the configurations of the TC+OC port reference source priority list.
Indexes
Column Syntax OID
optixPktPtpClockPLNum
This object indicates the number of reference sources in the priority list.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.25.1.1
optixPktPtpClockPLRefClkIDHigh
This object indicates the high order of the port reference clock source number (with the highest priority).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.25.1.2
optixPktPtpClockPLRefClkIDLow
This object indicates the low order of the port reference clock source number (with the highest priority).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.25.1.3
optixPktPtpClockPLRecClkNo
This object indicates the receive clock source interface ID of a port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.25.1.4

optixPktClockSrvInfoTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.1.27 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktClockSrvInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktClockSrvInfoTable' 
This table describes the configurations of clock services.
optixPktClockSrvInfoEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1
This entry describes the configurations of clock services.
Indexes
Column Syntax OID
optixPktClockEsrvID
This object indicates the service index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1.1
optixPktClockEsrName
This object indicates the clock service name, which is a string of 64 characters.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1.2
optixPktClockL2pTnl
This object indicates the flag for transparent transmission of L2 protocol packets. 0: No transparent transmission; 1: BPDU transparent transmission
Enumeration
Enumerated Values:
0disable
1bpdu
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1.3
optixPktClockLgcIFnum
This object indicates the number of logical interfaces.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1.4
optixPktClockTypeID
This object indicates the type of a logical interface (1: V-UNI; 2: V-NNI) and the list of logical interface IDs.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.13.1.27.1.5

optixPktPtpAcrUniTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.3.1 · 1 row entry · 20 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPtpAcrUniTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktPtpAcrUniTable' 
This table describes the configuration message of IEEE 1588 ACR unicast.
optixPktPtpAcrUniEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1
This entry describes the configuration message of IEEE 1588 ACR unicast.
Indexes
Column Syntax OID
optixPtpAcrUniId
This parameter describes the 1588acr unicast ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.1
optixPtpAcrUniNegEnable
This parameter describes the negotiation enable state. 0 disable, 1 enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.2
optixPtpAcrUniMasterIPAddr
This parameter describes the master IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.3
optixPtpAcrUniMasterIPMask
This parameter describes the subnet mask corresponding to the master IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.4
optixPtpAcrUniSrcPri
This parameter describes the clock source priority. Value range: 1 to 2. The default value is 1.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.5
optixPtpAcrUniMasterState
This parameter describes the status of the 1588acr unicast source. 1 up, 2 down
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.6
optixPtpAcrUniBoardId
This parameter describes the board slot ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.7
optixPtpAcrUniSubBoardId
This parameter describes the subboard ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.8
optixPtpAcrUniPortId
This parameter describes the port number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.9
optixPtpAcrUniDMAC
This parameter describes the destination MAC address.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.10
optixPtpAcrUniTnlInLabel
This parameter describes the ingress lable of a tunnel. Value range: 16 to 1048575, 4294967295.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.11
optixPtpAcrUniTnlOutLabel
This parameter describes the egress label of a tunnel. Value range: 16 to 1048575, 4294967295.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.12
optixPtpAcrUniPwInLabel
This parameter describes the ingress label of a PW. Value range: 16 to 1048575, 4294967295.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.13
optixPtpAcrUniPwOutLabel
This parameter describes the egress label of a PW. Value range: 16 to 1048575, 4294967295.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.14
optixPtpAcrUniTnlExp
This parameter describes the tunnel EXP. Value range: 0 to 7. The default value is 6.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.15
optixPtpAcrUniTnlVlanId
This parameter describes the tunnel VLAN. Value range: 1 to 4094, 65535.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.16
optixPtpAcrUniTnlVlanPri
This parameter describes the tunnel VLAN priority. Value range: 0 to 7. The default value is 6.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.17
optixPtpAcrUniPwTpid
This parameter describes the PW TPID. Value range: 1536 to 65535. The default value is 34984.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.18
optixPtpAcrUniPwVlan
This parameter describes the PW VLAN. Value range: 1 to 4094, 65535.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.19
optixPtpAcrUniVrfName
This parameter describes the VRF name.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.1.1.20

optixPktPtpAcrUniPktTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPtpAcrUniPktTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktPtpAcrUniPktTable' 
This table describes the configuration message of IEEE 1588 ACR unicast packets.
optixPktPtpAcrUniPktEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.3.2.1
This entry describes the configuration message of IEEE 1588 ACR unicast packets.
Indexes
Column Syntax OID
optixPtpAcrUniPktType
This parameter describes the packet type. 1 sync, 2 announce, 3 delay
Enumeration
Enumerated Values:
1sync
2announce
3delay
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.2.1.1
optixPtpAcrUniDurationField
This parameter describes the duration field. Value range: 6 to 1000. The default value is 300.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.2.1.2
optixPtpAcrUniSendCycle
This parameter describes the send cycle. Value range: sync: 3 to 14, announce: 7 to 14, delay: 3 to 14
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.2.1.3

optixPktPtpAcrUniNegStatTable

table
.1.3.6.1.4.1.2011.2.25.4.50.13.3.3 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPtpAcrUniNegStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PTPCLOCK-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PTPCLOCK-MIB::optixPktPtpAcrUniNegStatTable' 
This table describes the negotiation state of IEEE 1588 ACR unicast.
optixPktPtpAcrUniNegStatEntry row .1.3.6.1.4.1.2011.2.25.4.50.13.3.3.1
This entry describes the negotiation state of IEEE 1588 ACR unicast.
Indexes
Column Syntax OID
optixPtpAcrUniNegState
This parameter describes the negotiation state. 1 up, 2 down, 3 no-use
Enumeration
Enumerated Values:
1up
2down
3nouse
 .1.3.6.1.4.1.2011.2.25.4.50.13.3.3.1.1