OPTIX-PKT-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
304

optixEthPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.1 · 1 row entry · 51 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixEthPortTable' 
This table contains basic configuration information of ETH port
optixEthPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1
Entry containins basic configuration information of ETH port
Indexes
Column Syntax OID
optixEthPortId
This parameter specifies the eth port index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.1
optixEthPortEncapType
This parameter specifies the eth port encaptype. 0: null, 1: cTag, 2: sTag, 3: iTag, 4: atm, 5: ppp
Enumerationr/w
Enumerated Values:
0null
1cTag
2sTag
3iTag
4atm
5ppp
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.2
optixEthPortMtu
This parameter specifies the eth port MTU. Value range: 1518 to 9600.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.3
optixEthPortWorkMode
This parameter specifies the eth port work mode. 0: auto, 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 7: snmp10gfulllan, 8: snmp10gfullwan, 14: snmp2500mfull, 25…
Enumerationr/w
Enumerated Values:
0auto
1snmp10mhalf
2snmp10mfull
3snmp100mhalf
4snmp100mfull
5snmp1000mhalf
6snmp1000mfull
7snmp10gfulllan
8snmp10gfullwan
14snmp2500mfull
255negotiating
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.4
optixEthPortEn
This parameter specifies the eth port phy enable. 0: disable, 1: enable
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.5
optixEthPortPtnWorkMode
This parameter specifies the eth port phy work mode. 0: auto, 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 7: snmp10gfulllan, 8: snmp10gfullwan, 255: negotiating
Enumeration
Enumerated Values:
0auto
1snmp10mhalf
2snmp10mfull
3snmp100mhalf
4snmp100mfull
5snmp1000mhalf
6snmp1000mfull
7snmp10gfulllan
8snmp10gfullwan
255negotiating
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.6
optixEthPortPhyFCState
This parameter specifies the eth port phy flow control state. 0: disable, 1: enable, 2: send, 3: recv
Enumeration
Enumerated Values:
0disable
1enable
2send
3recv
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.7
optixEthPortPtnMacLoop
This parameter specifies the eth port mac loop type. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.8
optixEthPortPtnPhyLoop
This parameter specifies the eth port phy loop type. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.9
optixEthPortFcMode
This parameter specifies the eth port fc mode. 0: disable, 1: enable, 2: send, 3: recv
Enumerationr/w
Enumerated Values:
0disable
1enable
2send
3recv
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.10
optixEthPortAutoFcMode
This parameter specifies the eth port fc mode auto. 0: disable, 1: asym, 2: sym, 3: asymSym
Enumerationr/w
Enumerated Values:
0disable
1asym
2sym
3asymSym
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.11
optixEthPortOpif
This parameter specifies the eth port opif type. 0: none, 1: singleMode, 2: multiMode, 3: electrical
Enumeration
Enumerated Values:
0none
1singleMode
2multiMode
3electrical
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.12
optixEthPortSamplingId
This parameter specifies the eth port receive rate
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.13
optixEthPortRxRate
This parameter specifies the eth port receive rate
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.14
optixEthPortTxRate
This parameter specifies the eth port send rate
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.15
optixEthPortRealFc
This parameter specifies the eth port real fc mode result. 0: disable, 1: enable, 2: send, 3: recv
Enumeration
Enumerated Values:
0disable
1enable
2send
3recv
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.16
optixEthPortMdimode
This parameter specifies the eth port mdi mode. 0: mdix, 1: auto, 2: mdi
Enumerationr/w
Enumerated Values:
0mdix
1auto
2mdi
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.17
optixEthPortEnable
This parameter specifies the eth port enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.18
optixEthPortVlanId
This parameter specifies the eth port vlan ID. Value range: 0 to 4095.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.19
optixEthPortVlanPri
This parameter specifies the eth port vlan pri. Value range: 0 to 7. A larger value indicates a higher priority.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.20
optixEthPortTag
This parameter specifies the eth port tag. 0: access, 1: tagAware, 2: hybrid, 255: snmp0xff
Enumerationr/w
Enumerated Values:
0access
1tagAware
2hybrid
255snmp0xff
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.21
optixEthPortQinqId
This parameter specifies the eth port qinq
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.22
optixEthPortMac
This parameter specifies the eth port mac address
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.23
optixEthPortLoopEn
This parameter specifies the eth port loop enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.24
optixEthPortBlockEn
This parameter specifies the eth port block after loop. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.25
optixEthPortWatchFlowEn
This parameter specifies the eth port watch flow enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.26
optixEthPortWatchFlowTime
This parameter specifies the eth port watch flow time
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.27
optixEthPortBroadBateenEn
This parameter specifies the eth port broadbateen enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.28
optixEthPortBroadBateen
This parameter specifies the eth port broadbateen
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.29
optixEthPortAutoneg
This parameter specifies the eth port autoneg. 1: snmp10mhalf, 2: snmp10mfull, 3: snmp100mhalf, 4: snmp100mfull, 5: snmp1000mhalf, 6: snmp1000mfull, 255: null
Enumerationr/w
Enumerated Values:
1snmp10mhalf
2snmp10mfull
3snmp100mhalf
4snmp100mfull
5snmp1000mhalf
6snmp1000mfull
255null
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.30
optixEthPortWatchRateEn
This parameter specifies the eth port watch rate enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.31
optixEthPortOpticalDir
This parameter specifies the eth port optical direction. 0: none, 1: sglfbr, 2: dblfbr
Enumeration
Enumerated Values:
0none
1sglfbr
2dblfbr
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.32
optixEthPortJitterEnableState
This parameter specifies the eth port enable status of jitter optimization. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.33
optixEthPortPhyErrDetectState
This parameter specifies the eth port enable status of PHY erroneous detection. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.34
optixEthPortErrorFlag
This parameter specifies the eth port flag of PHY mistake
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.35
optixEthPortLevelMode
This parameter specifies the eth port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.36
optixEthPortUpDownStauts
This parameter specifies the up down status of port. 0: down, 1: up
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.37
optixHybridMinBandWidth
This parameter specifies hybrid port min bandwidth
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.38
optixHybridMaxBandWidth
This parameter specifies hybrid port max bandwidth
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.39
optixEthPortPoeEnable
This parameter specifies the eth port enable status of poe. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
2auto
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.40
optixEthPortRealPoeEnable
This parameter specifies the eth port real enable status of poe
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.41
optixHybridL3HoldOffTime
This parameter specifies hybrid port Hold off time
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.42
optixEthPortBerDetectState
This parameter indicates whether the bit error detection function is enabled.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.43
optixEthPortPacketLostEXC
This parameter specifies the threshold of PacketLostEXC.
Enumerationr/w
Enumerated Values:
0null
2tenToPower2
3tenToPower3
4tenToPower4
5tenToPower5
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.44
optixEthPortPacketLostSD
This parameter specifies the threshold of PacketLostSD.
Enumerationr/w
Enumerated Values:
0null
5tenToPower5
6tenToPower6
7tenToPower7
8tenToPower8
9tenToPower9
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.45
optixEthPortBerSwitchState
This parameter indicates whether the bit-error-triggered switching is enabled.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.46
optixEthPortBerSwitchType
This parameter indicates the type of the bit-error-triggered switching.
Enumerationr/w
Enumerated Values:
0sf
1sd
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.47
optixEthPortbdbateabsth
This object indicates the threshold of the broadcast packet suppression absolute value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.48
optixEthPortBwuSwatChenableState
This object indicates the enable status of monitoring port historical bandwidth usage.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.49
optixEthPortPoeMode
This parameter specifies the PoE mode of the Ethernet port. 0: PoE; 1: PoE plus
Enumerationr/w
Enumerated Values:
0poe
1poeplus
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.50
optixEthPortRowStatus
This parameter specifies the eth port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.1.1.255

optixVlanPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.2 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixVlanPortTable' 
This table contains basic configuration information of VLAN port
optixVlanPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1
This table contains basic configuration information of VLAN port
Indexes
Column Syntax OID
optixVlanPortId
This parameter specifies the VLAN port index. Value range: 0x2800 to 0x2FFF,0x9100 to 0x94FF.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.1
optixVlanPortVportType
This parameter specifies the virtual port type for VLAN ports. 1: eoa, 2: vlan, 3: eoadsl, 4: eoefm, 5: eoatm, 12: vlanif
Enumerationr/w
Enumerated Values:
1eoa
2vlan
3eoadsl
4eoefm
5eoatm
12vlanif
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.2
optixVlanPortBoardId
This parameter specifies the vlan port board id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.3
optixVlanPortSubID
This parameter specifies the vlan port subcard id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.4
optixVlanPortPortId
This parameter specifies the vlan port port id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.5
optixVlanPortVlan
This parameter specifies the vlan port vlan. Value range: 1 to 4094.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.6
optixVlanPortLevelMode
This parameter specifies the vlan port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.7
optixVlanIfPortVlan
This parameter specifies VLAN IDs configured for VLAN-IF member ports. Value range: 1 to 4094.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.8
optixVlanPortRowStatus
This parameter specifies the vlan port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.2.1.255

optixAtmPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.3 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixAtmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixAtmPortTable' 
This table contains basic configuration information of ATM port
optixAtmPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1
This table contains basic configuration information of ATM port
Indexes
Column Syntax OID
optixAtmPortId
This parameter specifies the atm port id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.1
optixAtmPortLoop
This parameter specifies the atm port loop mode. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.2
optixAtmPortType
This parameter specifies the atm port type. 1: UNI, 2: NNI
Enumerationr/w
Enumerated Values:
1uni
2nni
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.3
optixAtmPortCellEn
This parameter specifies the atm port cell enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.4
optixAtmPortMinVpi
This parameter specifies the atm port min vpi. Value range: 0 to 0xfff and 0xffff. The value 0xffff indicates that the minimum value is not limited. This parameter is reserved and the default value is 0xffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.5
optixAtmPortMaxVpi
This parameter specifies the atm port max vpi. Value range: 0 to 0xfff and 0xffff. The value 0xffff indicates that the maximum value is not limited. This parameter is reserved and the default value is 0xffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.6
optixAtmPortMinVci
This parameter specifies the atm port min vci. Value range: 0 to 0xffff and 0xffffffff. The value 0xffffffff indicates that the minimum value is not limited. The default value is 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.7
optixAtmPortMaxVci
This parameter specifies the atm port max vci Value range: 0 to 0xffff and 0xffffffff. The value 0xffffffff indicates that the maximum value is not limited. The default value is 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.8
optixAtmPortVccVpi
This paramater specifies the atm port vcc vpi. Value range fro OSN 1099/OSN 3900: 0 to 64.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.9
optixAtmPortEncapType
This parameter specifies the atm port encaptype. 0: null, 1: cTag, 2: sTag, 3: iTag, 4: atm, 5: ppp
Enumeration
Enumerated Values:
0null
1cTag
2sTag
3iTag
4atm
5ppp
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.10
optixAtmPortLevelMode
This parameter specifies the Atm Port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.11
optixAtmPortRowStatus
This paramater specifies the atm port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.3.1.255

optixMLPPPTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.4 · 1 row entry · 19 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixMLPPPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixMLPPPTable' 
This table contains basic configuration information of ML-PPP
optixMLPPPEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1
Entry containins basic configuration information of ML-PPP
Indexes
Column Syntax OID
optixMLPPPId
This parameter specifies ML-PPP id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.1
optixMLPPPMinMemNum
This parameter specifies ML-PPP min member number
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.2
optixMLPPPDelayCheckEn
This parameter specifies ML-PPP delay check enable. 0: disable, 1: enable, 255: none
Enumerationr/w
Enumerated Values:
0disable
1enable
255none
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.3
optixMLPPPDelay
This parameter specifies ML-PPP delay
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.4
optixMLPPPBoardId
This parameter specifies ML-PPP board id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.5
optixMLPPPSubId
This parameter specifies ML-PPP subcard id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.6
optixMLPPPPortId
This parameter specifies ML-PPP port id
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.7
optixMLPPPState
This parameter specifies ML-PPP state. 1: up, 2: down
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.8
optixMLPPPNegotIp
This parameter specifies ML-PPP negot ip
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.9
optixMLPPPNegotMask
This parameter specifies ML-PPP negot mask
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.10
optixMLPPPSeqNumType
This parameter specifies ML-PPP SEQNUM type. 0: huawei, 1: short, 2: long
Enumerationr/w
Enumerated Values:
0huawei
1short
2long
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.11
optixMLPPPFragsize
This parameter specifies ML-PPP frag size
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.12
optixMLPPPSendSpeed
This parameter specifies ML-PPP send speed
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.13
optixMLPPPReciveSpeed
This parameter specifies ML-PPP recive speed
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.14
optixMLPPPOSICPType
This parameter specifies ML-PPP OSICP type. 0: disable, 1: enable
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.15
optixMLPPPMtu
This parameter specifies the MLPPP port MTU
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.16
optixMLPPPLevelMode
This parameter specifies the MLPPP mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.17
optixMLPPPResetState
This parameter specifies the MLPPP reset state. 0: null
Enumerationr/w
Enumerated Values:
0null
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.18
optixMLPPPRowStatus
This parameter specifies ML-PPP row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.4.1.255

optixL3PortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL3PortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixL3PortTable' 
This table contains basic configuration information of L3 Port
optixL3PortEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1
Entry containins basic configuration information of L3 Port
Indexes
Column Syntax OID
optixL3PortId
This parameter specifies the L3 port id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.1
optixL3PortIpMode
This parameter specifies the L3 port ip mode. 1: dsgt, 2: brwne, 3: brwpt
Enumerationr/w
Enumerated Values:
1dsgt
2brwne
3brwpt
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.2
optixL3PortIpAddr
This parameter specifies the L3 port ip address. Value range in in dotted decimal notation: 0.0.0.0 to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.3
optixL3PortIpMask
This parameter specifies the L3 port ip mask. Value range in in dotted decimal notation: 0.0.0.0 to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.4
optixL3PortBrwIpBoardId
This parameter specifies the L3 port ip borrow ip board id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.5
optixL3PortBrwIpSubId
This parameter specifies the L3 port ip borrow ip port id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.6
optixL3PortBrwIpPortId
This parameter specifies the L3 port ip borrow subbd id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.7
optixL3PortMplsEnable
This parameter specifies the L3 port mpls enable. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.8
optixL3PortArpAgeTime
This parameter specifies the L3 port arp age time. Value range: 1 to 1440 (unit: minute)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.9
optixL3PortArpFullFlag
This parameter specifies the L3 port arp Full flag
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.10
optixL3PortMtu
This parameter specifies the L3 port mtu. Value range:46 to 9600, default:1500
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.11
optixL3PortRowStatus
This parameter specifies the L3 port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.5.1.255

optixE1Table

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.6 · 1 row entry · 44 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixE1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixE1Table' 
This table contains configuration information of E1 port
optixE1Entry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1
Entry containing configuration information of E1 port
Indexes
Column Syntax OID
optixE1PortId
This parameter specifies the E1 port id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.1
optixE1RetimingMode
This parameter specifies E1 port retiming mode. 0: master, 1: slave, 2: line
Enumerationr/w
Enumerated Values:
0master
1slave
2line
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.2
optixE1LinkCode
This parameter specifies E1 port linkcode. 0: hdb3
Enumerationr/w
Enumerated Values:
0hdb3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.3
optixE1Frm
This parameter specifies E1 port frame struct. 0: unframe, 1: doubleFrame, 2: crc4Multiframe
Enumerationr/w
Enumerated Values:
0unframe
1doubleFrame
2crc4Multiframe
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.4
optixE1Eq
This parameter specifies E1 port cable resistance value. 1: snmp75, 2: snmp120
Enumeration
Enumerated Values:
1snmp75
2snmp120
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.5
optixE1UserSlotNum
This parameter specifies E1 user slot number
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.6
optixE1Loop
This parameter specifies E1 port loop mode. 0: noloop, 1: inloop, 2: outloop
Enumerationr/w
Enumerated Values:
0noloop
1inloop
2outloop
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.7
optixE1PrbsDir
This parameter specifies E1 port prbs dir. 0: UNI, 1: NNI
Enumerationr/w
Enumerated Values:
0uni
1nni
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.8
optixE1PrbsFrm
This parameter specifies E1 port prbs frm. 0: unFrame, 1: frame
Enumerationr/w
Enumerated Values:
0unFrame
1frame
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.9
optixE1TestType
This parameter specifies E1 port test type. 1: shortTerm, 2: longTerm, 3: longTerm
Enumerationr/w
Enumerated Values:
1shortTerm
2longTerm
3longlongTerm
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.10
optixE1StartDataTime
This parameter specifies E1 port start data time
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.11
optixE1EndDataTime
This parameter specifies E1 port end data time
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.12
optixE1Progress
This parameter specifies E1 port progress. Value range: 1 to 100 (unit: %)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.13
optixE1RealTestPeriod
This parameter specifies E1 port real test period
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.14
optixE1DataTypeNum
This parameter specifies E1 port data type number
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.15
optixE1Type1
This parameter specifies E1 port type 1
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.16
optixE1TestType2
This parameter specifies E1 port type 2
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.17
optixE1Result1
This parameter specifies E1 port test result 1
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.18
optixE1TestResult2
This parameter specifies E1 port test result 2
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.19
optixE1EncapType
This parameter specifies the e1 port encaptype. 0: null, 1: cTag, 2: sTag, 3: iTag, 4: atm, 5: ppp
Enumerationr/w
Enumerated Values:
0null
1cTag
2sTag
3iTag
4atm
5ppp
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.20
optixE1Mtu
This parameter specifies the E1 MTU
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.21
optixE1LevelMode
This parameter specifies the E1 port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.22
optixE1BittestPrbsDir
This parameter specifies E1 port prbs dir. 0: UNI, 1: NNI
Enumerationr/w
Enumerated Values:
0uni
1nni
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.23
optixE1BittestPrbsFrm
This parameter specifies E1 port prbs frm. 0: unFrame, 1: frame
Enumerationr/w
Enumerated Values:
0unFrame
1frame
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.24
optixE1BittestType
This parameter specifies the E1 port bittest type. 1: shortTerm, 2: longTerm, 3: longTerm
Enumerationr/w
Enumerated Values:
1shortTerm
2longTerm
3longlongTerm
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.25
optixE1BittestStartDateTime
This parameter specifies the E1 port bittest date and time
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.26
optixE1BittestRealTestPeriod
This parameter specifies the E1 port bittest real test period
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.27
optixE1BittestStartPeriod
This parameter specifies the E1 port bittest start period
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.28
optixE1BittestTestResult1
This parameter specifies the E1 port bittest result(part 1)
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.29
optixE1BittestTestResult2
This parameter specifies the E1 port bittest result(part 2)
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.30
optixE1BittestTestResult3
This parameter specifies the E1 port bittest result(part 3)
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.31
optixE1TestAction
This parameter specifies E1 port test set Begin time. 0: stop, 1: start, 255: null
Enumerationr/w
Enumerated Values:
0stop
1start
255null
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.32
optixE1TestTime
This parameter specifies E1 port test set End Time
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.33
optixE1TestType3
This parameter specifies E1 port type 3.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.34
optixE1TestResult3
This parameter specifies E1 port test result 3
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.35
optixE1TestType4
This parameter specifies E1 port type 4
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.36
optixE1TestResult4
This parameter specifies E1 port test result 4
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.37
optixE1TestType5
This parameter specifies E1 port type 5
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.38
optixE1TestResult5
his parameter specifies E1 port test result 5
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.39
optixE1TestType6
This parameter specifies E1 port type 6
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.40
optixE1TestResult6
This parameter specifies E1 port test result 6
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.41
optixE1BerTH
This object indicates the level of the upper BER threshold of E1 links.
Enumerationr/w
Enumerated Values:
1e9
2e8
3e7
4e6
5e5
6e4
7e3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.42
optixE1AisCheck
This object indicates the status of the Ais alarm.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.43
optixE1RowStatus
This parameter specifies E1 port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.6.1.255

optixSPV4Table

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.7 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSPV4Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixSPV4Table' 
This table contains configuration information of serial port
optixSPV4Entry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1
Entry containing configuration information of serial port
Indexes
Column Syntax OID
optixSPV4Id
This parameter specifies the serial port ID
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.1
optixSPV4PortId
This parameter specifies physical port id
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.2
optixSPV4Num
This parameter specifies serial port number
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.3
optixSPV4List
This parameter specifies serial port list
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.4
optixSPV4EncapType
This parameter specifies the specifies serial port encaptype. 0: null, 1: cTag, 2: sTag, 3: iTag, 4: atm, 5: ppp
Enumerationr/w
Enumerated Values:
0null
1cTag
2sTag
3iTag
4atm
5ppp
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.5
optixSPV4LevelMode
This parameter specifies the specifies serial port mode. 1: level1, 2: level2, 3: level3, 4: level2Level3
Enumerationr/w
Enumerated Values:
1level1
2level2
3level3
4level2Level3
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.6
optixSPV4Mtu
This parameter specifies the SPV4 MTU
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.7
optixSPV4RowStatus
This parameter specifies serial port row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.7.1.255

optixSPVC12Table

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.8 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixSPVC12Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixSPVC12Table' 
This table contains configuration information of serial port vc12
optixSPVC12Entry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1
Entry containing configuration information of serial port vc12
Indexes
Column Syntax OID
optixSPVC12Id
This parameter sepcifies physical port of vc12
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.1
optixSPVC12HP
This parameter sepcifies HP of serial port vc12
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.2
optixSPVC12LP
This parameter sepcifies LP of serial port vc12
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.3
optixSPVC1264kNum
This parameter sepcifies 64k numbert of serial port vc 12
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.4
optixSPVC1264kList
This parameter sepcifies 64k list of serial port vc 12
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.5
optixSPVC12RowStatus
This parameter sepcifies SP VC12 row status
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.8.1.255

optixAddMLPPPMemberTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixAddMLPPPMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixAddMLPPPMemberTable' 
This table contains basic configuration information of ML-PPP
optixAddMLPPPMemberEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1
Entry containins basic configuration information of ML-PPP
Indexes
Column Syntax OID
optixAddMLPPPMemberMLPPPId
This parameter specifies ML-PPP id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1.1
optixAddMLPPPMemberBoardId
This parameter specifies ML-PPP board id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1.2
optixAddMLPPPMemberPortId
This parameter specifies ML-PPP port id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1.3
optixAddMLPPPMemberSubId
This parameter specifies ML-PPP subcard id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1.5
optixAddMLPPPMemberRowStatus
This parameter specifies ML-PPP row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.11.1.255

optixVC12Table

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.12 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixVC12Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixVC12Table' 
This table contains configuration information of VC12 bit test
optixVC12Entry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1
Entry containing configuration information of VC12 bit test
Indexes
Column Syntax OID
optixVC12pid
Entry containing port id of VC12 bit test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.1
optixVC12HpId
This parameter specifies the VC4 id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.2
optixVC12LpId
This parameter specifies the VC12 id
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.3
optixVC12PrbsDir
This parameter specifies bit test prbs dir. 0: UNI, 1: NNI
Enumerationr/w
Enumerated Values:
0uni
1nni
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.4
optixVC12PrbsFrm
This parameter specifies bit test prbs frm. 0: unFrame, 1: frame
Enumerationr/w
Enumerated Values:
0unFrame
1frame
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.5
optixVC12Action
This parameter specifies the bit test start control. 0: stop, 1: start, 255: invalid
Enumerationr/w
Enumerated Values:
0stop
1start
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.6
optixVC12Type
This parameter specifies the bit test type. 1: shortTerm, 2: longTerm, 3: longTerm
Enumerationr/w
Enumerated Values:
1shortTerm
2longTerm
3longlongTerm
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.7
optixVC12Time
This parameter specifies the bit test time. 0: invalid
Enumerationr/w
Enumerated Values:
0invalid
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.8
optixVC12StartDateTime
This parameter specifies the bit test start date time
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.9
optixVC12RealTestPri
This parameter specifies the bit test real test period
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.10
optixVC12StartPeriod
This parameter specifies the bit test start test period
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.11
optixVC12Result1
This parameter specifies the first part of bit test result
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.12
optixVC12Result2
This parameter specifies the second part of bit test result
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.13
optixVC12Result3
This parameter specifies the third part of bit test result
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.12.1.14

optixCL2HTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.13 · 1 row entry · 21 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCL2HTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixCL2HTable' 
This table describes basic information about starting to capture headers of L2 packets.
optixCL2HEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1
This entry contains basic configuration information of Start Capture Header of L2 Layer
Indexes
Column Syntax OID
optixCL2HStart
This parameter indicates that capturing headers of L2 packets starts.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.1
optixCL2HMode
This parameter specifies a capture mode.
Enumeration
Enumerated Values:
0once
1continuance
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.2
optixCL2HNum
This parameter indicates the number of captured packets.
Unsigned32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.3
optixCL2HLength
This parameter indicates the length of the packet header.
Unsigned32
Constraints:
range: 16-74
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.4
optixCL2HDirection
This parameter specifies the direction in which packets' headers are captured.
Enumeration
Enumerated Values:
0ingress
1egress
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.5
optixCL2HConditionMask
This parameter specifies a mask for header capturing conditions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.6
optixCL2HSourceMAC
This parameter specifies a source MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.7
optixCL2HSourceMACWC
This parameter specifies a wildcard character for source MAC addresses.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.8
optixCL2HDestinationMAC
This parameter specifies a destination MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.9
optixCL2HDestinationMACWC
This parameter specifies a wildcard character for destination MAC addresses.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.10
optixCL2HOutVlan
This parameter specifies an outer VLAN ID.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.11
optixCL2HOutVlanWC
This parameter specifies a wildcard character for outer VLAN IDs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.12
optixCL2HInnerVlan
This parameter specifies an inner VLAN ID.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.13
optixCL2HInnerVlanWC
This parameter specifies a wildcard character for inner VLAN IDs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.14
optixCL2HEthernetType
This parameter specifies an Ethernet type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.15
optixCL2HEthernetTypeWC
This parameter specifies a wildcard character for Ethernet types.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.16
optixCL2HAgeTime
This parameter specifies the aging time of capturing packet headers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.17
optixCL2ProhdrStart
This parameter indicates that capturing headers of L2 protocol packets starts.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.18
optixCL2HOffSetIndex
This parameter indicates the offset index of capturing packet headers.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.19
optixCL2HMatchLength
This parameter specifies the match length of capturing packet headers.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.20
optixCL2HMatchRule
This parameter specifies the match rule of capturing packet headers.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.52.1.13.1.21

optixCL3HTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.14 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCL3HTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixCL3HTable' 
This table describes basic information about starting to capture headers of L3 packets.
optixCL3HEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1
This entry contains basic configuration information of Start Capture Header of L3 Layer
Indexes
Column Syntax OID
optixCL3HStart
This parameter indicates that capturing headers of L3 packets starts.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.1
optixCL3HSrcIP
This parameter specifies a source IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.2
optixCL3HSrcIPWC
This parameter specifies a wildcard character for source IP addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.3
optixCL3HDestinationIP
This parameter specifies a destination IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.4
optixCL3HDestinationIPWC
This parameter specifies a wildcard character for destination IP addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.5
optixCL3HTOS
This parameter specifies a TOS.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.6
optixCL3HTOSWC
This parameter specifies a wildcard character for TOSs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.7
optixCL3HProtocolType
This parameter specifies a protocol type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.8
optixCL3HProtocolTypeWC
This parameter specifies a wildcard character for protocol types.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.9
optixCL3HICMPType
This parameter specifies an ICMP type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.10
optixCL3HICMPTypeWC
This parameter specifies a wildcard character for ICMP types.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.11
optixCL3HTCPSrcPortID
This parameter specifies the ID of a TCP source port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.12
optixCL3HTCPSrcPortIDWC
This parameter specifies a wildcard character for IDs of TCP source ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.13
optixCL3HTCPDstPortID
This parameter specifies the ID of a TCP destination port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.14
optixCL3HTCPDstPortIDWC
This parameter specifies a wildcard character for IDs of TCP destination ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.15
optixCL3HOffSetIndex
This parameter indicates the offset index of capturing packet headers.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.16
optixCL3HMatchLength
This parameter specifies the match length of capturing packet headers.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.17
optixCL3HMatchRule
This parameter specifies the match rule of capturing packet headers.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.52.1.14.1.18

optixPortCaptureHeaderTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPortCaptureHeaderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixPortCaptureHeaderTable' 
This table describes basic information about stopping packet header capturing on a port.
optixPortCaptureHeaderEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.15.1
This entry describes basic information about stopping packet header capturing on a port.
Indexes
Column Syntax OID
optixPortCaptureHeaderStop
This parameter indicates that packet header capturing stops on a port.
Enumerationr/w
Enumerated Values:
0stop
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.15.1.1
optixPortCapHeaderStopType
This parameter indicates the type of captured packets.
Enumerationr/w
Enumerated Values:
0service
1protocol
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.15.1.2
optixPortCapHeaderStopDirect
This parameter indicates the direction of captured packets on a port.
Enumerationr/w
Enumerated Values:
0ingress
1egress
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.15.1.3

optixPerAlmTHTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.20 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPerAlmTHTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixPerAlmTHTable' 
This table contains basic configuration of the optical power threshold.
optixPerAlmTHEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.20.1
This entry contains basic configuration of the optical power threshold.
Indexes
Column Syntax OID
optixPerAlmTHPathID
This object specifies the path ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.20.1.1
optixPerAlmTHtype
This object specifies the performance ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.20.1.2
optixPerAlmTHhigh
This object specifies the upper threshold.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.20.1.3
optixPerAlmTHLow
This object specifies the lower threshold.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.20.1.4

optixPktPortbwuswatchfluxTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.22 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPortbwuswatchfluxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixPktPortbwuswatchfluxTable' 
This table contains the historical bandwidth usage of ports.
optixPktPortbwuswatchfluxEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1
This entry contains the historical bandwidth usage of ports.
Indexes
Column Syntax OID
optixPktPortbwuStartTime
This object indicates the historical bandwidth usage of a port.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.1
optixPktPortbwuEndTime
This object indicates the end time of port historical bandwidth use.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.2
optixPktPortbwuTimelist
This object indicates the list of port historical bandwidth usage.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.3
optixPktPortbwurealStartTime
This object indicates the start time of port historical bandwidth use.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.4
optixPktPortbwuDataFlag
This object indicates whether the port historical bandwidth usage data is available. 0: No usage data is available; 1: Usage data is available.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.5
optixPktPortbwuRxDataUS
This object indicates the receive-end data of port historical bandwidth usage.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.6
optixPktPortbwuTxDataUS
This object indicates the transmit-end data of port historical bandwidth usage.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.22.1.7

optixPktPortBWWatchFluxTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.23 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPortBWWatchFluxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixPktPortBWWatchFluxTable' 
This table describes the historical physical traffic of ports.
optixPktPortBWWatchFluxEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.23.1
This entry describes the historical physical traffic of ports.
Indexes
Column Syntax OID
optixPktPortBWRealStartTime
This object indicates the start time of port historical physical flow.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.23.1.1
optixPktPortBWDataFlag
This object indicates whether the port historical physical flow is available. 0: No usage data is available; 1: Usage data is available.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.23.1.2
optixPktPortBWRxDataUS
This object indicates the receive-end data of port historical physical flow .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.23.1.3
optixPktPortBWTxDataUS
This object indicates the transmit-end data of port historical physical flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.23.1.4

optixPktPortRMONWatchFluxTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.24 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktPortRMONWatchFluxTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixPktPortRMONWatchFluxTable' 
This table describes the traffic of ports at any given time.
optixPktPortRMONWatchFluxEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.24.1
This entry describes the traffic of ports at any given time.
Indexes
Column Syntax OID
optixPktPortRMONRealStartTime
This object indicates the start time of port flow.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.24.1.1
optixPktPortRMONDataFlag
This object indicates whether the port flow is available. 0: No usage data is available; 1: Usage data is available.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.24.1.2
optixPktPortRMONRxDataUS
This object indicates the receive-end data of port flow .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.24.1.3
optixPktPortRMONTxDataUS
This object indicates the transmit-end data of port flow.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.24.1.4

optixEthPortExtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.25 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEthPortExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixEthPortExtTable' 
This table contains basic configuration information of an ETH port.
optixEthPortExtEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1
This entry contains basic configuration information of an ETH port.
Indexes
Column Syntax OID
optixEthPortholdupstate
This parameter specifies the forcible-up state of an ETH port. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.1
optixEthPortRemarkstate
This parameter specifies the demapping enable status of an ETH port.0:disable,1:enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.2
optixEthPortAutoBroadBaTh
This parameter indicates the threshold (%) for automatic broadcast packet suppression of PWs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.3
optixEthPortAutoBroadBaRealTh
This parameter indicates the actual threshold (%) for automatic broadcast packet suppression of PWs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.4
optixEthPortAutoBroadBaRealEn
This parameter indicates whether automatic broadcast packet suppression is enabled for PWs.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.5
optixEthPortUniDirMode
This parameter indicates whether unidirectional operation is enabled for 10G port.0:disable,1:enable.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.6
optixEthPortDefForwardType
This parameter indicates the default forwarding queue priority of ETH ports. Its value is an integer: cs7 (1), cs6 (2), ef (3), af4 (4), af3 (5), af2 (6), af1 (7), or be (8).
Enumerationr/w
Enumerated Values:
1cs7
2cs6
3ef
4af4
5af3
6af2
7af1
8be
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.7
optixEthPortPacketColor
This parameter indicates the default packet color of an ETH-port forwarding queue: red(1), yellow (2), or green (3).
Enumerationr/w
Enumerated Values:
1red
2yellow
3green
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.8
optixEthPortLagLinkAggrePortPri
This object indicates the priority of the L2 LAG slave port. Value range: 0 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.9
optixEthPortBwwatchEnable
This object indicates the enable status of monitoring port physical bandwidth usage.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.10
optixEthPortDelayWatchEn
This object indicates the enable status of accurate expansion. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.11
optixEthPortWaveWorkBand
This parameter is used to query the working band wavelength of a laser.
Enumeration
Enumerated Values:
0clband
1cband
2lband
3cband320G
4cbandraman
5lbandraman
6cwdmband
7smcband
8cband96a
9cbandplus
10cband192
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.12
optixEthPortGetWaveNum
This parameter is used to query the number of operating wavelengths of a laser.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.25.1.13

optixAtomGpsPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.26 · 1 row entry · 16 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixAtomGpsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixAtomGpsPortTable' 
This table contains basic configuration information of the GPS port.
optixAtomGpsPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1
This entry contains basic configuration information of the GPS port.
Indexes
Column Syntax OID
optixAtomGpsPortPtpDomainId
This parameter specifies the domain ID of an IEEE 1588 packet sent over the GPS port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.1
optixAtomGpsPortPtpPri1
This parameter specifies priority 1 of an IEEE 1588 packet sent over the GPS port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.2
optixAtomGpsPortPtpPri2
This parameter specifies priority 2 of an IEEE 1588 packet sent over the GPS port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.3
optixAtomGpsPortTimeYear
This parameter specifies the year of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.4
optixAtomGpsPortTimeMonth
This parameter specifies the month of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.5
optixAtomGpsPortTimeDay
This parameter specifies the day of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.6
optixAtomGpsPortTimeHour
This parameter specifies the hour of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.7
optixAtomGpsPortTimeMinute
This parameter specifies the minute of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.8
optixAtomGpsPortTimeSecond
This parameter specifies the second of the GPS port time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.9
optixAtomGpsPortTimeLockState
This parameter specifies the time locking status of the GPS port.
Enumeration
Enumerated Values:
0unlock
1lock
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.10
optixAtomGpsPortLliteNum
This parameter specifies the number of satellites available for the GPS port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.11
optixAtomGpsPortLliteId
This parameter specifies the satellite ID of the GPS port.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.12
optixAtomGpsPortLliteRatio
This parameter specifies the satellite SNR of the GPS port.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.13
optixAtomGpsPortSelfHealEn
This parameter specifies whether the self-healing of the GPS port is enabled.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.14
optixAtomGpsPortFreqLockState
This parameter specifies the frequency locking status of the GPS port.
Enumeration
Enumerated Values:
0unlock
1lock
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.15
optixAtomGpsPortReStart
This parameter specifies the row status of the GPS port.
Enumerationr/w
Enumerated Values:
0restart
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.26.1.16

optixVlanIfMemberTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.27 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixVlanIfMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixVlanIfMemberTable' 
This table contains basic configuration information about VLAN-IF member ports.
optixVlanIfMemberEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.27.1
The entry contains basic configuration information about VLAN-IF member ports.
Indexes
Column Syntax OID
optixVlanIfMemberBid
This parameter specifies the slot ID of the board providing VLAN-IF member ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.27.1.1
optixVlanIfMemberSubId
This parameter specifies the subboard ID of the board providing VLAN-IF member ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.27.1.2
optixVlanIfMemberPid
This parameter specifies the ID of VLAN-IF member ports.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.27.1.3
optixVlanIfMemberRowStatus
This parameter specifies row status of VLAN-IF member ports.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.27.1.255

optixEthPortCaptureHeaderTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.28 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEthPortCaptureHeaderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixEthPortCaptureHeaderTable' 
This table describes basic information about captured packet headers.
optixEthPortCaptureHeaderEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1
This entry contains basic configuration information about captured packet headers.
Indexes
Column Syntax OID
optixEthPortCaptureHeaderBId
This parameter specifies the board ID of an Ethernet port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.1
optixEthPortCaptureHeaderSubId
This parameter specifies the subboard ID of an Ethernet port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.2
optixEthPortCaptureHeaderPortId
This parameter specifies the ID of an Ethernet port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.3
optixEthPortCaptureHeaderDigType
This parameter indicates the type of captured packets.{service(0),protocol(1),all(255)}
Enumeration
Enumerated Values:
0service
1protocol
255all
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.4
optixEthPortCaptureHeaderHeadDir
This parameter specifies the direction in which packet headers are captured.{ingress(0),egress(1),all(255)}
Enumeration
Enumerated Values:
0ingress
1egress
255all
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.5
optixEthPortCaptureHeaderType
This parameter specifies the packet type of captured packets.{l2captureheader(0),l3captureheader(1),l2procaptureheader(2),l2l3captureheader(3)
Enumeration
Enumerated Values:
0l2captureheader
1l3captureheader
2l2procaptureheader
3l2l3captureheader
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.6
optixEthPortCaptureHeaderMode
This parameter indicates the mode of captured packets.{once(0),continuance(1)}
Enumeration
Enumerated Values:
0once
1continuance
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.7
optixEthPortCaptureHeaderHeadNum
This parameter indicates the number of captured packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.8
optixEthPortCaptureHeaderHeadLen
This parameter indicates the length of the packet header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.9
optixEthPortCaptureHeaderAgeTime
This parameter specifies the aging time of capturing packet headers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.10
optixEthPortCaptureHeaderMask
This parameter specifies a mask code of capturing packet headers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.11
optixEthPortCaptureHeaderRule
This parameter indicates the rule of capturing packet headers.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.12
optixEthPortCaphdrOffset
This parameter indicates the offset index of capturing packet headers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.13
optixEthPortCaphdrMatchLen
This parameter specifies the match length of capturing packet headers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.14
optixEthPortCaphdrMatchRule
This parameter specifies the match rule of capturing packet headers.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.52.1.28.1.15

optixDelayWatchTable

table
.1.3.6.1.4.1.2011.2.25.4.50.52.1.29 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixDelayWatchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-PORT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-PORT-MIB::optixDelayWatchTable' 
This table describes the information about accurate expansion.
optixDelayWatchEntry row .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1
This entry contains the information about accurate expansion.
Indexes
Column Syntax OID
optixDelayWatchStartTime
This parameter is used to query the start time of accurate expansion delay information.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.1
optixDelayWatchEndTime
This parameter is used to query the end time of accurate expansion delay information.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.2
optixDelayWatchTimelist
This parameter is used to query the number of accurate expansion delay information.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.3
optixDelayWatchrealStartTime
This parameter is used to query the actual start time of the accurate expansion delay information.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.4
optixDelayWatchDataFlag
This parameter is used to check for delay data in accurate expansion. 0-no delay data, 1-delay data
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.5
optixDelayWatchDelayMax
This parameter is used to query the maximum delay of accurate expansion.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.6
optixDelayWatchDelayAvg
This parameter is used to query the average delay of accurate expansion.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.7
optixDelayWatchDelayInfo1
This parameter is used to query the percentage of &lt; 1 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.8
optixDelayWatchDelayInfo2
This parameter is used to query the percentage of 1-2 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.9
optixDelayWatchDelayInfo3
This parameter is used to query the percentage of 2-4 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.10
optixDelayWatchDelayInfo4
This parameter is used to query the percentage of 4-6 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.11
optixDelayWatchDelayInfo5
This parameter is used to query the percentage of 6-10 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.12
optixDelayWatchDelayInfo6
This parameter is used to query the percentage of 10-15 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.13
optixDelayWatchDelayInfo7
This parameter is used to query the percentage of 15-20 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.14
optixDelayWatchDelayInfo8
This parameter is used to query the percentage of &gt; 20 ms delay distributions.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.52.1.29.1.15