OPTIX-PKT-MIRROR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
15

optixPktMirrorTable

table
.1.3.6.1.4.1.2011.2.25.4.50.22.1.1 · 1 row entry · 15 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPktMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-PKT-MIRROR-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-PKT-MIRROR-MIB::optixPktMirrorTable' 
This table describes the basic configuration informationin of the port mirror.
optixPktMirrorEntry row .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1
This entry describes the basic configuration information of the port mirror.
Indexes
Column Syntax OID
optixPktMirrorID
Port mirroring ID. Value range: 1 to 4294967295. 0 means auto.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.1
optixPktMirrorType
Type of port mirror. 0: local, 1: remote, 2: observe, 3:localClassifier
Enumerationr/w
Enumerated Values:
0local
1remote
2observe
3localClassifier
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.2
optixPktMirrorName
name of port mirror
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.3
optixPktMirrorSrcType
Type of source point of port mirror. 0: phyport, 1: V-UNI, 2: V-NNI, 3: flow
Enumerationr/w
Enumerated Values:
0phyport
1vuni
2vnni
3flow
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.4
optixPktMirrorSrcDir
Direction of source point of port mirror. 1: ingress, 2: egress
Enumerationr/w
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.5
optixPktMirrorSrcPoint1
Source point1 of port mirror. Value range: 1 to 65535 (based on the number of boards supported by the NE).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.6
optixPktMirrorSrcPoint2
Source point2 of port mirror. Value range: 1 to 255. If the NE does not support subboards, the value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.7
optixPktMirrorSrcPoint3
Source point3 of port mirror. Value range: 1 to 65535 (based on the number of ports supported by the board).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.8
optixPktMirrorDestPoint1
Dest point1 of port mirror. Value range: 1 to 65535 (based on the number of boards supported by the NE).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.9
optixPktMirrorDestPoint2
Dest point2 of port mirror. Value range: 1 to 255. If the NE does not support subboards, the value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.10
optixPktMirrorDestPoint3
Dest point3 of port mirror. Value range: 1 to 65535 (based on the number of ports supported by the board).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.11
optixPktMirrorCarrierType
Carrier type of port mirror. 0: PW, 1: QinQ
Enumeration
Enumerated Values:
0pw
1qinq
255snmp255
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.12
optixPktMirrorCarrierIndex
carrier index of port mirror
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.13
optixPktMirrorRules
This parameter indicates the matching rules for port traffic mirroring.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.14
optixPktMirrorRowStatus
the row status of port mirror
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.22.1.1.1.255