OPTIX-MPLSTP-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
171

optixTunnelTpOamMepTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.8 · 1 row entry · 37 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelTpOamMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixTunnelTpOamMepTable' 
This table is used to configure and manage the tunnel TP OAM Meps based on Y.1731. These configurations include the OAM standard, OAM ID, enable status, MEG information, MEP ID, MEP ID, CC/LCK/AIS packet period, packet priority, and SD/SF thresholds.
optixTunnelTpOamMepEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1
This entry indicates the parameter table for the tunnel TP OAM MEPs based on Y.1731.
Indexes
Column Syntax OID
optixTunnelTpOamMepIndex
This object indicates the tunnel OAM MEP index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.1
optixTunnelTpOamMepEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.2
optixTunnelTpOamMepLevel
This object indicates the MEG level. Default: 7. Valid values range from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.3
optixTunnelTpOamMepMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.4
optixTunnelTpOamMepId
This object indicates the MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.5
optixTunnelTpOamMepPeerId
This object indicates the remote MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.6
optixTunnelTpOamMepCheckWay
This object indicates the OAM detection mode. 1: auto 2: manual 255: invalid detection mode This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The queried value is invalid.
Enumerationr/w
Enumerated Values:
1auto
2manual
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.7
optixTunnelTpOamMepCcTime
This object indicates the CC packet period. 1: 3.33ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes 255: invalid
Unsigned32r/w
Constraints:
range: 1-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.8
optixTunnelTpOamMepCcPri
This object indicates the CC priority. Valid values range from 0 to 7. 0xff: invalid
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.9
optixTunnelTpOamMepCcSend
This object indicates the CC start/stop status. 0: disable1: enable 255: invalid This parameter is unconfigurable when the tunnel is a unidirectional ingress node. The queried value is invalid.
Enumerationr/w
Enumerated Values:
0disable
1enable
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.10
optixTunnelTpOamMepSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.11
optixTunnelTpOamMepSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.12
optixTunnelTpOamMepMegInfo
This object indicates the MEG ID, which is a character string.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.13
optixTunnelTpOamMepLckEnable
This object indicates the locking status. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.14
optixTunnelTpOamMepLckTime
This object indicates theLCK packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6:60000 ms (1 minute) 7: 600000 ms(10min)
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.15
optixTunnelTpOamMepLckPri
This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates thatthe priority is synchronized with the CC packet priority.
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.16
optixTunnelTpOamMepAisEnable
This object indicates whether the AIS is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.17
optixTunnelTpOamMepAisTime
This object indicates the AIS packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes)
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.18
optixTunnelTpOamMepAisPri
This object indicates the AIS packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority.
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.19
optixTunnelTpOamMepLmMode
This object indicates the LM packet mode. 0: standard 1: Huawei
Enumerationr/w
Enumerated Values:
0standard
1huawei
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.20
optixTunnelTpOamMepRevTnliIndex
This object indicates the reverse tunnel index. This parameter is applicable only when the tunnel serves as an egress node. When the value is 0xffffffff, the reverse tunnel index is not comnfigured.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.21
optixTunnelTpOamMepStandard
This object indicates the OAM protocol standard. 1: 1711,2: 1731
Enumerationr/w
Enumerated Values:
1y1711
2y1731
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.22
optixTunnelTpOamMepGalMode
This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label)
Enumerationr/w
Enumerated Values:
0rFC5586
1y1711
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.23
optixTunnelTpOamMepTSTState
This parameter indicates the sending status of TST packets. 0:stop 1:testing.
Enumerationr/w
Enumerated Values:
0stop
1testing
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.24
optixTunnelTpOamMepRCVPKTNum
This parameter indicates the total number of received TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.25
optixTunnelTpOamMepSendPKTNum
This parameter indicates the total number of sent TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.26
optixTunnelTpOamMepMISCRCNum
This parameter indicates the number of received CRC error TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.27
optixTunnelTpOamMepMISCodeNum
This parameter indicates the number of received TST packets with error codes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.28
optixTunnelTpOamMepMISOrderNum
This parameter indicates the number of received TST packets with error orders.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.29
optixTunnelTpOamMepClrTSTDir
This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&amp;amp;receive 1: receive 2: send
Enumerationr/w
Enumerated Values:
0bi
1recv
2send
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.30
optixTunnelTpOamMepPKTLength
This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates that setting the length is invalid.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.31
optixTunnelTpOamMepTimeSpace
This parameter indicates the TST testing interval.
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.32
optixTunnelTpOamMepPrio
This parameter indicates the priority of TST testing.
Unsigned32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.33
optixTunnelTpOamMepTranskind
This parameter indicates the type of the transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32.
Enumerationr/w
Enumerated Values:
0null
1nullCrc32
2prbs
3prbsCrc32
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.34
optixTunnelTpOamMepIsOffOper
This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt
Enumerationr/w
Enumerated Values:
0undisrupt
1disrupt
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.35
optixTunnelTpOamMepTSTRecvEn
This parameter indicates the receive enable status of TST packets.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.36
optixTunnelTpOamMepprotocolformat
This object indicates the format of the protocol,1:standard,2:huawei
Enumerationr/w
Enumerated Values:
1standard
2huawei
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.8.1.37

optixPWTpOamMepTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.9 · 1 row entry · 36 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWTpOamMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWTpOamMepTable' 
Thistable indicates the configuration and management of thePW TP OAM MEPs based on Y.1731. These configurations include the OAM standard, OAM ID, enable status, MEG information, MEP ID, CC/LCK/AIS packet period and priority, SD/SF thresholds.
optixPWTpOamMepEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1
Thisentry indicatesthe parameter table for thePW TP OAM MEPs based on Y.1731.
Indexes
Column Syntax OID
optixPWTpOamMepIndex
This object indicates thePW OAM MEP index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.1
optixPWTpOamMepEnable
This object indicates whether the OAM is enabled. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.2
optixPWTpOamMepLevel
This object indicates the MEG level. Default: 7. Valid values range from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.3
optixPWTpOamMepMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.4
optixPWTpOamMepId
This object indicates the MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.5
optixPWTpOamMepPeerId
This object indicates the remote MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.6
optixPWTpOamMepCheckWay
This object indicates the OAM detection mode. 1: auto 2: manual
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.7
optixPWTpOamMepCcTime
This object indicates the CC packet period. 1: 3.33 ms 2: 10 ms 3: 100 ms 4: 1s (default) 5: 10s 6: 1 minute 7: 10 minutes
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.8
optixPWTpOamMepCcPri
This object indicates the CC priority. Valid values rang from 0 to 7. 0xff: invalid
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.9
optixPWTpOamMepCcSend
This object indicates the CC start/stop status. 0: stop 1: start
Enumerationr/w
Enumerated Values:
0stop
1start
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.10
optixPWTpOamMepSf
This object indicates the SF threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.11
optixPWTpOamMepSd
This object indicates the SD threshold (packet loss rate). Valid values range from 0 to 100.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.12
optixPWTpOamMepMegInfo
This object indicates the MEG ID, which is a character string.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.13
optixPWTpOamMepLckEnable
This object indicates the locking status. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.14
optixPWTpOamMepLckTime
This object indicates the LCK packet period. 1: 3.3 ms 2: 10 ms 3: 100 ms 4: 1000 ms (1s) 5: 10000 ms (10s) 6: 60000 ms (1 minute) 7: 600000 ms (10 minutes)
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.15
optixPWTpOamMepLckPri
This object indicates the LCK packet priority. Valid values range from 0 to 7. 0xff indicates that the priority is synchronized with the CC packet priority.
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.16
optixPWTpOamMepLmMode
This object indicates the LM packet mode. 0: standard 1: huawei
Enumerationr/w
Enumerated Values:
0standard
1huawei
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.17
optixPWTpOamMepPeerLsrId
This object indicates the LSR IDto receive, which is the LSR ID of the valid MPLS device. 0.0.0.0: indicates that the peer IP address ofthe local PW is automatically obtained.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.18
optixPWTpOamMepPeerPwId
This object indicates the remote PW ID, which is a valid MPLS PW ID. 0: indicates that the ID of the local PW is automatically obtained.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.19
optixPWTpOamMepGalEnable
This object indicates the enable status of the GAL label. 1: enable 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.20
optixPWTpOamMepStandard
This object indicates the OAM protocol standard&amp;nbsp; 1: 1711 2: 1731
Enumerationr/w
Enumerated Values:
1y1711
2y1731
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.21
optixPWTpOamMepGalMode
This parameter indicates the GAL label mode. 0: RFC5586 (13 label) 1: Y.1711 (14 label)
Enumerationr/w
Enumerated Values:
0rFC5586
1y1711
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.22
optixPWTpOamMepTSTState
This parameter indicates the sending status of TST packets.
Enumerationr/w
Enumerated Values:
0stop
1testing
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.23
optixPWTpOamMepRCVPKTNum
This parameter indicates the total number of received TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.24
optixPWTpOamMepSendPKTNum
This parameter indicates the total number of sent TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.25
optixPWTpOamMepMISCRCNum
This parameter indicates the number of received CRC error TST packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.26
optixPWTpOamMepMISCodeNum
This parameter indicates the number of received TST packets with error codes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.27
optixPWTpOamMepMISOrderNum
This parameter indicates the number of received TST packets with error orders.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.28
optixPWTpOamMepClrTSTDir
This parameter indicates the direction in which the TST packet statistical results are deleted. 0: send&amp;amp;receive 1: receive 2: send
Enumerationr/w
Enumerated Values:
0bi
1recv
2send
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.29
optixPWTpOamMepPKTLength
This parameter indicates the length of a TST testing packet. The unit is byte. The value 0xffff indicates the setting the length is invalid.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.30
optixPWTpOamMepTimeSpace
This parameter indicates the TST testing interval.
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.31
optixPWTpOamMepPrio
This parameter indicates the priority of the TST testing.
Unsigned32r/w
Constraints:
range: 0-7
range: 255-255
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.32
optixPWTpOamMepTranskind
This parameter indicates the kind of transfer code. 0:null 1:nullCrc32 2:prbs 3:prbsCrc32
Enumerationr/w
Enumerated Values:
0null
1nullCrc32
2prbs
3prbsCrc32
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.33
optixPWTpOamMepIsOffOper
This parameter indicates whether TST interrupts services. 0:undisrupt 1:disrupt.
Enumerationr/w
Enumerated Values:
0undisrupt
1disrupt
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.34
optixPWTpOamMepTSTRecvEn
This parameter indicates the receive enable status of TST packets.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.35
optixPWTpOamMepprotocolformat
This object indicates the format of the potocol.1:standard,2:huawei
Enumerationr/w
Enumerated Values:
1standard
2huawei
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.9.1.36

optixTunnelTpOamMipTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelTpOamMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixTunnelTpOamMipTable' 
Thistable indicates the configuration and management of the tunnel TP OAM MIPs based on Y.1731. These configurations include theidentifier type, MEG information, and MIP ID.
optixTunnelTpOamMipEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1
Thisentry indicates theparameter table for the tunnel TP OAM MIPs based on Y.1731.
Indexes
Column Syntax OID
optixTunnelTpOamMipIndex
This object indicates the tunnel OAM MIP index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1.1
optixTunnelTpOamMipMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1.2
optixTunnelTpOamMipMegInfo
This object indicates the MEG ID, which is a character string.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1.3
optixTunnelTpOamMipId
This object indicates the MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1.4
optixTunnelTpOamMipRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.10.1.255

optixPWTpOamMipTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWTpOamMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWTpOamMipTable' 
Thistable indicates the configuration and management of thePW TP OAM MIPs based on Y.1731. These configurations include the identifier type, MEG information, and MIP ID.
optixPWTpOamMipEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1
Thisentry indicates the parameter table for the PW TP OAM MIPs based on Y.1731.
Indexes
Column Syntax OID
optixPWTpOamMipIndex
This object indicates the PW OAM MIP index, ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1.1
optixPWTpOamMipMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1.2
optixPWTpOamMipMegInfo
This object indicates the MEG ID, which is a character string.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1.3
optixPWTpOamMipId
This object indicates the MIP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1.4
optixPWTpOamMipRowStatus
This object indicates the row status. 1: active 4: createAndGo 6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.11.1.255

optixTunnelTpOamMepStateTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelTpOamMepStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixTunnelTpOamMepStateTable' 
This object indicates the status query of the tunnel TP OAM MEPs based on Y.1731.
optixTunnelTpOamMepStateEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1
This object indicates the status management of the tunnel TP OAM MEPs based on Y.1731.
Indexes
Column Syntax OID
optixTunnelTpOamMepDirection
For bidirectional tunnels, the status query is performaned in two directions, local and remote end. The query for the tunnel OAM is performed only in one direction, local or remote end. For the unidirectional ingress tu…
Enumeration
Enumerated Values:
0farend
1nearend
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1.1
optixTunnelTpOamMepState
This object indicates the tunnel OAM status. 0: Thetunnel OAMis in initializing state. 1: The tunnel OAM is available at the local end. 2: The tunnel OAM is available but defectiveat the local end. 3: The tunnel OAM is …
Enumeration
Enumerated Values:
0initialstate
1nearendavailable
2nearenddefectavailable
3nearenddefectunavailable
4nearendunavailable
5farendavailable
6farenddefectavailable
7farenddefectunavailable
8farendunavailable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1.2
optixTunnelTpOamMepDefectType
This object indicates the defect type of the tunnel OAM. 1: dServer 2: dPeerME 3: dLOCV 4: dTTSI_Mismatch 5: dTTSI_Mismerge 6: dExcess 7: dUnknown 8: dUnExpMeg 9: dUnExpPer 10: dunExpMep 255: invalid
Enumeration
Enumerated Values:
1dserver
2dpeerme
3dlocv
4dttsimismatch
5dttsimismerge
6dexcess
7dunknown
8dunexpmeg
9dunexpper
10dunexpmep
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1.3
optixTnlTpOamMepUnavailableTime
This object indicates the unavailable time of the tunnel OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1.4
optixTnlTpOamMepDefectPosition
This object indicates the position of the tunnel defect: node identified by IP addresses.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.12.1.5

optixPWTpOamMepStateTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.13 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWTpOamMepStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWTpOamMepStateTable' 
Thistable is used toquery thestatus of thePW TP OAM MEPs based on Y.1731.
optixPWTpOamMepStateEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1
Thisentry indicates the status management of thePW TP OAM MEPs based on Y.1731.
Indexes
Column Syntax OID
optixPWTpOamMepDirection
For bidirectional MPLS PWs, the status query is performaned in two directions, local and remote ends. ForPW OAM, the status query is performend in single direction: localor remote end.
Enumeration
Enumerated Values:
0farend
1nearend
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1.1
optixPWTpOamMepState
This object indicates the PW OAM status. 0: ThePW OAM is in initializing state. 1: ThePW OAM is available at the local end. 2: ThePW OAM is available at the local end. 3: The PWOAM is defective and unavailable at the lo…
Enumeration
Enumerated Values:
0initialstate
1nearendavailable
2nearenddefectavailable
3nearenddefectunavailable
4nearendunavailable
5farendavailable
6farenddefectavailable
7farenddefectunavailable
8farendunavailable
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1.2
optixPWTpOamMepDefectType
This object indicates the defect type of the PW OAM. 1: dServer 2: dPeerME 3: dLOCV 4: dTTSI_Mismatch 5: dTTSI_Mismerge 6: dExcess 7: dUnknown 8: dUnExpMeg 9: dUnExpPer 10: dunExpMep 255: invalid
Enumeration
Enumerated Values:
1dserver
2dpeerme
3dlocv
4dttsimismatch
5dttsimismerge
6dexcess
7dunknown
8dunexpmeg
9dunexpper
10dunexpmep
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1.3
optixPWTpOamMepUnavailableTime
This object indicates the unavailable time of thePW OAM. The time ranges from 0 to 300,000 ms. 4294967295: invalid
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1.4
optixPWTpOamMepDefectPosition
This object indicates the position of the PW OAM defect: a node identified by IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.13.1.5

optixTunnelTpOamSwitchTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.14 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixTunnelTpOamSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixTunnelTpOamSwitchTable' 
This?table is used to Switch the identifier type of tunnel TP OAM based on Y.1731.
optixTunnelTpOamSwitchEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.14.1
This&nbsp;entry is used to Switch the identifier type of tunnel TP OAM based on Y.1731.
Indexes
Column Syntax OID
optixTunnelTpOamSwitchMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based Only icc-based and customer-based modes can be configured,ip-based mode Can be inquired merely
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.14.1.1
optixTunnelTpOamSwitchMepId
This object indicates the MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.14.1.2
optixTunnelTpOamSwitchMepPeerId
This object indicates the remote MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.14.1.3
optixTunnelTpOamSwitchMegInfo
This object indicates the MEG ID, which is a character string. In icc-based mode, the MEG ID information is does not surpass 13 Characters.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.14.1.4

optixPWTpOamSwitchTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.15 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWTpOamSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWTpOamSwitchTable' 
This?table is used to Switch the identifier type of PW TP OAM based on Y.1731.
optixPWTpOamSwitchEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.15.1
This?entry is used to Switch the identifier type of PW TP OAM based on Y.1731.
Indexes
Column Syntax OID
optixPWTpOamSwitchMegType
This object indicates the identifier type. 1: ip-based 2: icc-based 3: customer-based Only icc-based and customer-based modes can be configured,ip-based mode Can be inquired merely
Enumerationr/w
Enumerated Values:
1ipbased
2iccbased
3customerbased
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.15.1.1
optixPWTpOamSwitchMepId
This object indicates the MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.15.1.2
optixPWTpOamSwitchMepPeerId
This object indicates the remote MEP ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.15.1.3
optixPWTpOamSwitchMegInfo
This object indicates the MEG ID, which is a character string. In icc-based mode, the MEG ID information is does not surpass 13 Characters.
OctetStringr/w
Constraints:
range: 0-96
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.15.1.4

optixPWPingTrcRtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.18 · 1 row entry · 16 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWPingTrcRtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWPingTrcRtTable' 
This table manages the PW PING and PW TRACEOUTE configurations including the PW PING start/stop and PW TRACEOUTE start/stop.
optixPWPingTrcRtEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1
This entry indicates the parameter table for the PW PING and PW TRACEROUTE.
Indexes
Column Syntax OID
optixPWPingTrcRtIndex
This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.1
optixPWPingPeerIP
This object indicates the IP address of the peer end that initiates PW PING.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.2
optixPWPingPeerPwID
This object indicates the PW ID of the peer end that initiates PW PING.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.3
optixPWPingReqNum
This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.4
optixPWPingExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.5
optixPWPingTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.6
optixPWPingSendint
This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.7
optixPWPingReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.8
optixPWPingPktlen
This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.9
optixPWPingTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.10
optixPWTrcRtExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.11
optixPWTrcRtTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.12
optixPWTrcRtReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.13
optixPWTrcRtPktlen
This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.14
optixPWTrcRtTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.15
optixPWPingTrcRtStop
This object indicates to stop PW PING and PW TRACEROUTE.
Enumerationr/w
Enumerated Values:
0stop
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.18.1.16

optixMplsTpOamLbTestTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.19 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixMplsTpOamLbTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixMplsTpOamLbTestTable' 
This table describes LB test configurations.
optixMplsTpOamLbTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1
This entry describes LB test configurations.
Indexes
Column Syntax OID
optixMplsTpOamLbTestMegType
This object describes the type of the maintenance entity group.
Enumeration
Enumerated Values:
1lsp
2pw
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.1
optixMplsTpOamLbTestIndex
This object describes the index of the tunnel OAM MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.2
optixMplsTpOamLbTestTargetType
This object indicates the target node type.
Enumerationr/w
Enumerated Values:
1mep
2mip
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.3
optixMplsTpOamLbTestTargetID
This object indicates the target node ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.4
optixMplsTpOamLbTestTTL
This object indicates the time to live of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.5
optixMplsTpOamLbTestPktNum
This object indicates the number of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.6
optixMplsTpOamLbTestPktLen
This object indicates the length of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.7
optixMplsTpOamLbTestSendInt
This object indicates the interval at which LB test packets are transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.8
optixMplsTpOamLbTestPri
This object indicates the priority of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.9
optixMplsTpOamLbTestStop
This object indicates to stop the LB test.
Enumerationr/w
Enumerated Values:
0stop
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.19.1.10

optixLSPPingTrcRtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.20 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixLSPPingTrcRtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixLSPPingTrcRtTable' 
This table indicates LSP PING and LSP TRACEROUTE configurations including the LSP PING start/stop and LSP TRACEOUT start/stop.
optixLSPPingTrcRtEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1
This entry indicates the parameter table for the LSP PING and LSP TRACETOURE.
Indexes
Column Syntax OID
optixLSPPingTrcRtIndex
This object indicates the LSP index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.1
optixLSPPingReqNum
This object indicates the number of Echo Request packets for initiating LSP PING. Valid values range from 0 to 0xffffffff. The default value is 3.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.2
optixLSPPingExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.3
optixLSPPingTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.4
optixLSPPingSendint
This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.5
optixLSPPingReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.6
optixLSPPingPktlen
This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.7
optixLSPingTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.8
optixLSPTrcRtExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.9
optixLSPTrcRtTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.10
optixLSPTrcRtReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.11
optixLSPTrcRtPktlen
This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.12
optixLSTrcRtTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.13
optixLSPPingTrcRtStop
This object indicates to stop PW PING and PW TRACEROUTE.
Enumerationr/w
Enumerated Values:
0stop
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.20.1.14

optixLSPPingExtTrcRtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.22 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixLSPPingExtTrcRtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixLSPPingExtTrcRtTable' 
This table indicates LSP PING and LSP TRACEROUTE configurations including the LSP PING start/stop and LSP TRACEOUT start/stop.
optixLSPPingExtTrcRtEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1
This entry indicates the parameter table for the LSP PING and LSP TRACETOURE.
Indexes
Column Syntax OID
optixLSPPingExtTrcRtIndex
This object indicates the LSP index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.1
optixLSPPingExtReqNum
This object indicates the number of Echo Request packets for initiating LSP PING. Valid values range from 0 to 0xffffffff. The default value is 3.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.2
optixLSPPingExtExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.3
optixLSPPingExtTTL
This object indicates the TTL value of transmitted packets, which also indicates the number of retry hops. Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.4
optixLSPPingExtSendint
This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.5
optixLSPPingExtReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.6
optixLSPPingExtPktlen
This object indicates the length of a transmitted packet. The default value is 64. Valid values range from 64 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.7
optixLSPPingExtTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.8
optixLSPPingExtBitMode
This object indicates the check mode. 0:not check bit mode,1:all 0 mode,2:all f mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.22.1.9

optixPWPingExtTrcRtTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.23 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPWPingExtTrcRtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixPWPingExtTrcRtTable' 
This table manages the PW PING and PW TRACEOUTE configurations including the PW PING start/stop and PW TRACEOUTE start/stop.
optixPWPingExtTrcRtEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1
This entry indicates the parameter table for the PW PING and PW TRACEROUTE.
Indexes
Column Syntax OID
optixPWPingExtTrcRtIndex
This object indicates the PW PING or PW TRACEOUTE index ranging from 1 to 0x00ffffff.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.1
optixPWPingExtPeerIP
This object indicates the PW ID of the peer end that initiates PW PING.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.2
optixPWPingExtPeerPwID
This object indicates the PW ID of the peer end that initiates PW PING.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.3
optixPWPingExtReqNum
This object indicates the number of Echo Request packets initiating PW PING. Valid values range from 0 to 0xffffffff. The default value is 3.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.4
optixPWPingExtExp
This object indicates the EXP value for the transmitted packets. Valid values range from 0 to 7. The default value is 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.5
optixPWPingExtTTL
This object indicates the TTL value for the transmitted packets (the value indicates the number of attempt hops). Valid values range from 1 to 255. The default value is 255.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.6
optixPWPingExtSendint
This object indicates the interval at which packets are transmitted. Valid values range from 10 to 1000 with the unit of 10 ms. The default value is 100 (that is 1s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.7
optixPWPingExtReplymode
This object indicates the Reply mode. The default value is 2. Valid values are as follows: 1:no response 2: IPv4 UDP response 4: application control channel.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.8
optixPWPingExtPktlen
This object indicates the length of a transmitted packet. The default value is 84. Valid values range from 84 to 1400.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.9
optixPWPingExtTimeOut
This object indicates the timeout period. Valid values range from 50 to 6000 with the unit of 10 ms. The default value is 300 (that is 3s).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.10
optixPWPingExtBitMode
This object indicates the check mode, 0:not check bit mode,1:all 0 mode,2:all f mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.23.1.11

optixMplsTpOamExtLbTestTable

table
.1.3.6.1.4.1.2011.2.25.4.50.4.1.24 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixMplsTpOamExtLbTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MPLSTP-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MPLSTP-OAM-MIB::optixMplsTpOamExtLbTestTable' 
This table describes LB test configurations.
optixMplsTpOamExtLbTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1
This entry describes LB test configurations.
Indexes
Column Syntax OID
optixMplsTpOamExtLbTestMegType
This object describes the type of the maintenance entity group.
Enumeration
Enumerated Values:
1lsp
2pw
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.1
optixMplsTpOamExtLbTestIndex
This object describes the index of the tunnel OAM MEP.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.2
optixMplsTpOamExtLbTestTargetType
This object indicates the target node type.
Enumerationr/w
Enumerated Values:
1mep
2mip
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.3
optixMplsTpOamExtLbTestTargetID
This object indicates the target node ID.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.4
optixMplsTpOamExtLbTestTTL
This object indicates the time to live of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.5
optixMplsTpOamExtLbTestPktNum
This object indicates the number of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.6
optixMplsTpOamExtLbTestPktLen
This object indicates the length of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.7
optixMplsTpOamExtLbTestSendInt
This object indicates the interval at which LB test packets are transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.8
optixMplsTpOamExtLbTestPri
This object indicates the priority of LB test packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.9
optixMplsTpOamExtLbTestBitMode
This object indicates the check mode,0:not check bit mode,1:all 0 mode,2:all f mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.4.1.24.1.10