OPTIX-MISC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
30

optixEnvironmentTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixEnvironmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixEnvironmentTable' 
This table describes the device environmentconfigurations.
optixEnvironmentEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1
Thisentry describes the device environment configurations.
Indexes
Column Syntax OID
optixEnvironmentBdId
This object indicates theslot IDof the board that supports environment configurations.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.1
optixRelayControlMode
This object indicates the relay control mode. 0: pmuauto, 1: pmumanual
Enumerationr/w
Enumerated Values:
0pmuauto
1pmumanual
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.2
optixRelayNormalAlmState
This object indicates the general relay alarm status. 0: close, 1: open
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.3
optixRelaySeriousAlmState
This object indicates theserious relay alarm status. 0: close, 1: open
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.3.1.4

optixRelayTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixRelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixRelayTable' 
This table indicates the relay configuration information.
optixRelayEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1
Thisentry indicates the relay configuration information.
Indexes
Column Syntax OID
optixRelayId
This object indicates the ID of the relay connected to each board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.1
optixRelayUseState
This object indicates the relayusage status. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.2
optixRelayAlmSwitchState
This object indicates the switch status of relay alarms. 0: close, 1: open
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.3
optixRelayAlmLevel
This object indicates the alarm level. 0: critical, 1: major, 2: minor, 3: ignore
Enumerationr/w
Enumerated Values:
0critical
1major
2minor
3ignore
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.4
optixRelayOutState
This object indicates the out state. 0: close, 1: open
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.4.1.5

optixAlmOutputTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixAlmOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixAlmOutputTable' 
This table describes the alarm output information.
optixAlmOutputEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1
Thisentry describes the alarm output information.
Indexes
Column Syntax OID
optixAlmOutputLevel
This object indicates the alarm output level. 1: critical, 2: major, 3: minor, 4: ignore
Enumeration
Enumerated Values:
1critical
2major
3minor
4ignore
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1.1
optixAlmOutputNum
This object indicates the alarm output channel ID. 1: the first output channel, 2: the second output channel, 3: the third output channel, 4: the forth output channel
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.5.1.2

optixRelayNameTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixRelayNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixRelayNameTable' 
This table describes the relay name.
optixRelayNameEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1
Thisentry describes the relay name.
Indexes
Column Syntax OID
optixRelayType
This object indicates the relay type. 0: all, 1: input, 2: ext
Enumeration
Enumerated Values:
0all
1input
2ext
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1.1
optixRelayName
This object indicates the relay name.
OctetStringr/w
Constraints:
range: 0-21
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.6.1.2

optixOamPortMngTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.7 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixOamPortMngTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixOamPortMngTable' 
This table describes the OAM port configurations on devices.
optixOamPortMngEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1
This entry describes the OAM port configurations on devices.
Indexes
Column Syntax OID
optixOamBdId
This object indicates the slot ID of the communication board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.1
optixOamSubBdId
This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.2
optixOamPortId
This object indicates the port number of the communication board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.3
optixOamPortType
This object indicates the OAM port type. 0: all, 1: com, 2: eth, 3: oam, 4: fF, 5: ext, 6: usb
Enumeration
Enumerated Values:
0all
1com
2eth
3oam
4fF
5ext
6usb
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.4
optixOamPortState
This object indicates the OAM port status. 0: close, 1: open
Enumerationr/w
Enumerated Values:
0close
1open
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.7.1.5

optixCommuMngTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.8 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCommuMngTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixCommuMngTable' 
This table describes the configurations of communication boards on devices.
optixCommuMngEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1
Thisentry describes the configurations of communication boards on devices.
Indexes
Column Syntax OID
optixCommuBdId
This object indicates the slot ID of the communication board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.1
optixCommuSubBdId
This object indicates the subboard ID of the communication board. This parameter takes a fixed value of 255.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.2
optixCommuPortId
This object indicates the port number of the communication board.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.3
optixEthPortAdaptMode
This object indicates the adaptation mode of the ETH port. 0: fixed, 1: adapt
Enumerationr/w
Enumerated Values:
0fixed
1adapt
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.4
optixEthPortAdaptSpeed
This object indicates the speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego
Enumerationr/w
Enumerated Values:
0snmp10m
1snmp100m
254commufail
255inautonego
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.5
optixEthPortAdaptDuplex
This object indicates the transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego
Enumerationr/w
Enumerated Values:
0half
1full
254commufail
255inautonego
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.6
optixCommuRealMode
This object indicates the real working mode of the ETH port. 0: fixed, 1: adapt
Enumeration
Enumerated Values:
0fixed
1adapt
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.7
optixCommuRealSpeed
This object indicates the real speed mode of the ETH port. 1: snmp100m, 0: snmp10m, 254: commufail, 255: inautonego
Enumeration
Enumerated Values:
0snmp10m
1snmp100m
254commufail
255inautonego
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.8
optixCommuRealDuplex
This object indicates the real transmission modeof the ETH port. 1: full, 0: half, 254: commufail, 255: inautonego
Enumeration
Enumerated Values:
0half
1full
254commufail
255inautonego
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.8.1.9

optixPowerMonstateTable

table
.1.3.6.1.4.1.2011.2.25.4.30.39.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixPowerMonstateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-MISC-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-MISC-MIB::optixPowerMonstateTable' 
This table describes the power input monitoring enable status of the power board.
optixPowerMonstateEntry row .1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1
This entry describes the power input monitoring enable status of the power board.
Indexes
Column Syntax OID
optixPowerMonstateSlotId
This parameter indicates the slot ID of the power board.
Unsigned32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.1
optixPowerMonstatePort
This parameter indicates the power interface. Value range:
1: First power input
2: Second power input
Unsigned32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.2
optixPowerMonstateState
This parameter indicates the enable status of power input monitoring.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.30.39.1.9.1.3