OPTIX-L2VPN-MIB Table View

The ETH private line service is shown in the point-to-point mode in the topology. This table is used to transmit UNI-to-UNI ETH private line service in the point-to-point mode.

optixUnitoUniElineEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1

This entry indicates the UNI-to-UNI ETH private line service in the point-to-point mode.

Indexes

optixUnitoUniElineIndex optixUnitoUniElineFirstUniId optixUnitoUniElineSecondUniId

Column	Syntax	OID
optixUnitoUniElineIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.1
optixUnitoUniElineFirstUniId This object indicates the first V-UNI ID of the service. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.2
optixUnitoUniElineSecondUniId This object indicates the second V-UNI ID of the service. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.3
optixUnitoUniElineId This object indicates the service ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.4
optixUnitoUniElineName This object indicates the service name, which is a character string in 64 bytes.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.5
optixUnitoUniElinePrtlthrough This object indicates the flag of transparently transmitting Layer 2 protocol packets. 0: disable 1: bpdu (transparently transmitting BPDU protocol packets) 2: lacp (transparently transmitting LACP protocol packets)	Enumerationr/w Enumerated Values: 0 disable 1 bpdu 2 lacp	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.6
optixUnitoUniElineMtu This object indicates the packet length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.7
optixUnitoUniElineTagrole This object indicates the tag role attribute. 1: user 2: service	Enumerationr/w Enumerated Values: 1 user 2 service	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.8
optixUnitoUniElineFirstUniBid This object indicates the first V-UNI slot ID of the service. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.9
optixUnitoUniElineFirstUniSubBid This object indicates the first V-UNI subboard ID of the service. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.10
optixUnitoUniElineFirstUniPortId This object indicates the first V-UNI port number of the service. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.11
optixUnitoUniFirstUniVlanNum This object indicates the number of VLANs of the first V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.12
optixUnitoUniFirstUniVlanlist This object indicates the list of VLANs of the first V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1,indicating that the VLAN ID of the PW is …	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.13
optixUnitoUniElineSecondUniBid This object indicates the second V-UNI slot ID of the service. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.14
optixUnitoUniElineSecondUniSubBid This object indicates the second V-UNI subboard ID of the service. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.15
optixUnitoUniElineSecondUniPortId This object indicates the second V-UNI port number of the service. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.16
optixUnitoUniSecondUniVlanNum This object indicates the number of VLANs of thesecond V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.17
optixUnitoUniSecondUniVlanlist This object indicates the list of VLANs of thesecond V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.18
optixUnitoUniElineRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.1.1.255

The ETH private line service is shown in the point-to-point mode in the topology. This table is used to transmit UNI-to-NNI ETH private line service in the point-to-point mode.

optixUnitoNniElineEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1

This entry indicates the UNI-to-NNI ETH private line service in the point-to-point mode.

Indexes

optixUnitoNniElineIndex optixUnitoNniElineUniId optixUnitoNniElineNniId

Column	Syntax	OID
optixUnitoNniElineIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.1
optixUnitoNniElineUniId This object indicates the service V-UNI ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.2
optixUnitoNniElineNniId This object indicates the service V-NNI ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.3
optixUnitoNniElineId This object indicates the service ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.4
optixUnitoNniElineName This object indicates the service name, which is a character string in 64 bytes.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.5
optixUnitoNniElinePrtlthrough This object indicates the flag of transparently transmitting Layer 2 protocol packets. 0: disable 1: bpdu (transparently transmitting BPDU protocol packets) 2: lacp (transparently transmitting LACP protocol packets)	Enumerationr/w Enumerated Values: 0 disable 1 bpdu 2 lacp	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.6
optixUnitoNniElineMtu This object indicates the packet length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.7
optixUnitoNniElineTagrole This object indicates the tag role attribute. 1: user 2: service	Enumerationr/w Enumerated Values: 1 user 2 service	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.8
optixUnitoNniElineUniBid This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.9
optixUnitoNniElineUniSubBid This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.10
optixUnitoNniElineUniPortId This object indicates the port number of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.11
optixUnitoNniElineUniVlanNum This object indicates the number of VLANs of the V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.12
optixUnitoNniElineUniVlanlist This object indicates the list of VLANs of the V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is 3.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.13
optixUnitoNniElineNniType This object indicates the NNI carrier type. 1: pw 3: phyport 4: qinq	Enumerationr/w Enumerated Values: 1 pw 3 phyport 4 qinq	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.14
optixUnitoNniElineNniParaOne This object indicates the first parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the s…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.15
optixUnitoNniElineNniParaTwo This object indicates thesecond parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates thesu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.16
optixUnitoNniElineNniParaThree This object indicates the third parameter of the carrier ID. When the carrier type is PW, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. When the carr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.17
optixUnitoNniArpSendSwitchEnable This object indicates the state of the ARP both send switch.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.18
optixUnitoNniElineRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.2.1.255

The ETH private line service is shown in the point-to-point mode in the topology. This table is used to transmit NNI-to-NNI ETH private line service in the point-to-point mode.

optixNnitoNniElineEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1

This entry indicates the NNI-to-NNI ETH private line service in the point-to-point mode.

Indexes

optixNnitoNniElineIndex optixNnitoNniFirstNniId optixNnitoNniSecondNniId

Column	Syntax	OID
optixNnitoNniElineIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.1
optixNnitoNniFirstNniId This object indicates the first V-NNI ID of the service. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.2
optixNnitoNniSecondNniId This object indicates thesecond V-NNI ID of the service. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.3
optixNnitoNniElineId This object indicates the service ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.4
optixNnitoNniElineName This object indicates the service name, which is a character string in 64 bytes.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.5
optixNnitoNniElinePrtlthrough This object indicates the flag of transparently transmitting Layer 2 protocol packets. 0: disable 1: bpdu (transparently transmitting BPDU protocol packets) 2: lacp (transparently transmitting LACP protocol packets)	Enumerationr/w Enumerated Values: 0 disable 1 bpdu 2 lacp	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.6
optixNnitoNniElineMtu This object indicates the packet length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.7
optixNnitoNniElineTagrole This object indicates the tag role attribute. 1: user 2: service	Enumerationr/w Enumerated Values: 1 user	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.8
optixNnitoNniFirstNniType This object indicates the carrier type of the first NNI. 1: pw 3: phyport 4: qinq	Enumerationr/w Enumerated Values: 1 pw 3 phyport 4 qinq	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.9
optixNnitoNniFirstNniParaOne This object indicates the first parameter of the first NNI carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indic…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.10
optixNnitoNniFirstNniParaTwo This object indicates the second parameter of the first NNI carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indi…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.11
optixNnitoNniFirstNniParaThree This object indicates the third parameter of the first NNI carrier ID. When the carrier type is pw, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. Whe…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.12
optixNnitoNniSecondNniType This object indicates the carrier type of the second NNI. 1: pw, 3: phyport, 4: qinq	Enumerationr/w Enumerated Values: 1 pw 3 phyport 4 qinq	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.13
optixNnitoNniSecondNniParaOne This object indicates the first parameter of thesecond NNI carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indic…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.14
optixNnitoNniSecondNniParaTwo This object indicates the second parameter of the second NNI carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter ind…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.15
optixNnitoNniSecondNniParaThree This object indicates thethird parameter of the second NNI carrier ID. When the carrier type is pw, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. Whe…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.16
optixNnitoNniElineRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.3.1.255

This table implements the configurations of ETH private network services. The ETH private network service is shown in the muti-point to multi-point mode in the topology. Devices transmit ETH services in the multi-point to multi-point mode through the ETH private network.

optixElanEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1

This entry indicates the configuration table of the ETH private network service.

Indexes

optixElanIndex

Column	Syntax	OID
optixElanIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.1
optixElanId This object indicates the service ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.2
optixElanName This object indicates the service name, which is a character string in 64 bytes.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.3
optixElanPrtlthrough This object indicates the flag of transparently transmitting Layer 2 protocol packets. 0: disable 1: bpdu (transparently transmitting BPDU protocol packets) 2: lacp (transparently transmitting LACP protocol packets)	Enumerationr/w Enumerated Values: 0 disable 1 bpdu 2 lacp	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.4
optixElanMtu This object indicates the packet length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.5
optixElanTagrole This object indicates the tag role attribute. 1: user 2: service	Enumerationr/w Enumerated Values: 1 user	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.6
optixElanTagMode This object indicates the tag type of the private network service. 0: t-awared 1: c-awared 2: s-awared	Enumerationr/w Enumerated Values: 0 tawared 1 cawared 2 sawared	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.7
optixElanMacLearnEnable This object indicates the capability of self-learning MAC addresses. 0: disable 1: enable	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.8
optixElanMacLearnMode This object indicates the MAC address learning mode. 1: svl 2: ivl	Enumerationr/w Enumerated Values: 1 svl 2 ivl	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.9
optixElanMacAgingEnable This object indicates the capability of aging MAC addresses. 0: disable 1: enable	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.10
optixElanMacAgingTime This object indicates the MAC address aging time. Valid values: 1-640 minutes.	Unsigned32r/w Constraints: range: 1-640	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.11
optixElanMacSize This object indicates the size of the MAC address table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.12
optixElanMacAlmUpperLimit This object indicates the upper threshold of the MAC address detection. Valid values: 80-100.	Unsigned32r/w Constraints: range: 80-100	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.13
optixElanMacAlmLowerLimit This object indicates the lower threshold of the MAC address detection. Valid values: 60-100.	Unsigned32r/w Constraints: range: 60-100	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.14
optixElanUnicastDispose This object indicates the processing mode of unknown unicast frames. 1: discard 2: flood	Enumerationr/w Enumerated Values: 1 discard 2 flood	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.15
optixElanMulticastDispose This object indicates the processing mode of unknown multicast frames. 1: discard 2: flood	Enumerationr/w Enumerated Values: 1 discard 2 flood	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.16
optixElanSportRole This object indicates the role of port S in the E-LAN service.	Enumerationr/w Enumerated Values: 0 auto 1 pbnni 2 vuni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.17
optixElanRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.4.1.255

The UNI refers to the ETH port oriented to the user devices, which is used to carry UNI services. This table implements the configurations of the ETH UNI services. These configurations include the slot ID, subboard ID, port number, and VLAN list.

optixElanUniEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1

This entry indicates the configuration table of the logical UNIs for the ETH private network .

Indexes

optixElanIndex optixElanUniId

Column	Syntax	OID
optixElanUniId This object indicates the service V-UNI ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.1
optixElanUniBid This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.2
optixElanUniSubBid This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.3
optixElanUniPortId This object indicates the port number of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.4
optixElanUniVlanNum This object indicates the number of VLANs of the V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.5
optixElanUniVlanlist This object indicates the list of VLANs of the V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is 3.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.6
optixElanUniRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.5.1.255

The PB UNI is used to add an SVLAN label to the UNI service after the service is connected to the Provide Bridge network. This table implements the configurations of the logical UNIs of the Provide Bridge private network. These configurations include the slot ID, subboard ID, port number, VLAN list, and SVLAN ID added to the UNI service.

optixElanPbUniEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1

This entry indicates the configuration table of the logical UNIs for the Provide Bridge ETH private network.

Indexes

optixElanIndex optixElanPbUniId

Column	Syntax	OID
optixElanPbUniId This object indicates the service V-UNI ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.1
optixElanPbUniBid This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.2
optixElanPbUniSubBid This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.3
optixElanPbUniPortId This object indicates the port number of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.4
optixElanPbUniVlanNum This object indicates the number of VLANs of the V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.5
optixElanPbUniVlanlist This object indicates the list of VLANs of the V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is 3.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.6
optixElanPbUniSVlanId This object indicates the added SVLAN ID. Value range: 1 to 4094.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.7
optixElanPbUniRowStatus This object indicates the row status. 1: active4: createAndGo6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.6.1.255

This table implements the configurations of the logical ETH NNIs. The NNI refers to the ETH port oriented to the packet transport network, which is used to configure ETH NNI services. According to the service carrying mode, the NNIs can be classified to: carried by port,caried by PW,carried by QinQ link

optixElanNniEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1

This entry indicates the configuration table of the logical NNIs for the ETH private network .

Indexes

optixElanIndex optixElanNniId

Column	Syntax	OID
optixElanNniId This object indicates the service V-NNI ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.1
optixElanNniType This object indicates the NNI carrier type. 1: pw 3: phyport 4: qinq	Enumerationr/w Enumerated Values: 1 pw 3 phyport 4 qinq	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.2
optixElanNniParaOne This object indicates the first parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the s…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.3
optixElanNniParaTwo This object indicates the second parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.4
optixElanNniParaThree This object indicates the third parameter of the carrier ID. When the carrier type is pw, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. When the carr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.5
optixElanNniRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.7.1.255

This table implements the configurations of the spit horizon group for an ETH private network. Packets cannot be forwarded between ports in a split horizon group to prevent broadcast storm due to packet loopbacks.

optixElanSplithrigrpEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1

This entry indicates the configuration table of the ETH private network horizon split group.

Indexes

optixElanIndex optixElanSplithrigrpId

Column	Syntax	OID
optixElanSplithrigrpId This object indicates the horizon split group ID.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1.1
optixElanSplithrigrpPortNum This object indicates the number of logical interfaces.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1.2
optixElanSplithrigrpPortTypeList This object indicates the type list of logical interfaces. 1: vuni 2: vnni Each byte indicates the type of the interface.	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1.3
optixElanSplithrigrpPortIdList This object indicates thelist of logical interface IDs. Each two bytes indicates the port number.	OctetStringr/w Constraints: range: 0-2048	.1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1.4
optixElanSplithrigrpRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.8.1.255

This table implements the configurations of the MAC blacklist for an ETH private network to filter packets that are not allowed to forward MAC addresses.

optixElanMacBlackListEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.9.1

This entry indicates the configuration table of the black list of the ETH private network MAC addresses.

Indexes

optixElanIndex optixElanMacBlackListVlanId optixElanMacBlackListMacAddr

Column	Syntax	OID
optixElanMacBlackListVlanId This object indicates the VLAN ID. Valid values: 1-4094. 0xfffe: svl mode.	Unsigned32 Constraints: range: 65534-65534 range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.9.1.1
optixElanMacBlackListMacAddr This object indicates the MAC addresses in the black list.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.2.25.4.50.3.1.9.1.2
optixElanMacBlackListRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.9.1.255

This table implements the configurations of the static MAC forwarding table for an ETH private network. Static MAC addresses will not be aged.

optixElanStaticMacFdbEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1

This entry indicates the forwarding table of the ETH private network static MAC addresses.

Indexes

optixElanIndex optixElanStaticMacFdbVlanId optixElanStaticMacFdbMacAddr

Column	Syntax	OID
optixElanStaticMacFdbVlanId This object indicates the VLAN ID. Valid values: 1-4094. 0xfffe: svl mode.	Unsigned32 Constraints: range: 65534-65534 range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1.1
optixElanStaticMacFdbMacAddr This object indicates the MAC address, which is an unicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1.2
optixElanStaticMacFdbOutPortType This object indicates the type of the logical destination interface of the MAC address. 1: vuni 2: vnni	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1.3
optixElanStaticMacFdbOutPortId This object indicates the logical destination interface ID of the MAC address.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1.4
optixElanStaticMacFdbRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.10.1.255

This table implements the query of the actual static MAC forwarding table for an ETH private network.

optixElanMacQueryEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1

This entry is used to query the forwarding table of the private network static MAC addresses.

Indexes

optixElanIndex optixElanMacQueryVlanId optixElanMacQueryMacAddr

Column	Syntax	OID
optixElanMacQueryVlanId This object indicates the VLAN ID. Valid values: 1-4094. 0xfffe: svl mode.	Unsigned32 Constraints: range: 65534-65534 range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.1
optixElanMacQueryMacAddr This object indicates the MAC address, which is an unicast address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.2
optixElanMacQueryMacType This object indicates the MAC address type. 1: static 2: dynamic	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.3
optixElanMacQueryOutPortType This object indicates the destination interface type of the MAC address. 1: physical interfaces (including UNIs and NNIs in the phyport type) 2: PW 3: QinQ	Enumeration Enumerated Values: 1 phyport 2 pw 3 qinq 4 unkown	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.4
optixElanMacQueryPortParaOne This object indicates the first parameter of the destination interface ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter i…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.5
optixElanMacQueryPortParaTwo This object indicates the second parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.6
optixElanMacQueryPortParaThree This object indicates the third parameter of the carrier ID. When the carrier type is pw, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. When the carr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.11.1.7

This table implements the configurations of an E-AGGR service, which is shown in themulti-point to point mode in the topology. Devices aggregate services input from multiple UNIs to one UNI or NNI carried by ports or PWs, or aggregate services input from multiple NNIs carried by PWs or ports to one UNI.

optixEthAggregateEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1

This entry indicates the configuration table of the E-AGGR service.

Indexes

optixEthAggregateIndex

Column	Syntax	OID
optixEthAggregateIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.1
optixEthAggregateId This object indicates the service ID.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.2
optixEthAggregateName This object indicates the service name, which is a character string in 64 bytes.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.3
optixEthAggregateMtu This object indicates the packet length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.4
optixEthAggregateTagrole This object indicates the tag role attribute. 1: user 2: service	Enumerationr/w Enumerated Values: 0 user 1 service	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.5
optixEthAggregateRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.12.1.255

This table implements the configurations of the logical UNI for an E-AGGR service. The UNI refers to the ETH port oriented to the user devices tocarry UNI services. These configurations include the slot ID, subboard ID, port number, and VLAN list.

optixEthAggregateUniEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1

This entry indicates the configuration table of the logical UNIs of the E-AGGR service.

Indexes

optixEthAggregateIndex optixEthAggregateUniId

Column	Syntax	OID
optixEthAggregateUniId This object indicates the service V-UNI ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.1
optixEthAggregateUniRole This object indicates the role of the logical interface. 1: root 2: leaf	Enumerationr/w Enumerated Values: 1 root 2 leaf	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.2
optixEthAggregateUniBid This object indicates the slot ID of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.3
optixEthAggregateUniSubBid This object indicates the subboard ID of the service V-UNI. Value range: 1 to 255.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.4
optixEthAggregateUniPortId This object indicates the port number of the service V-UNI. Value range: 1 to 65535.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.5
optixEthAggregateUniVlanNum This object indicates the number of VLANs of the V-UNI (0: VLAN number of the port). Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.6
optixEthAggregateUniVlanlist This object indicates the list of VLANs of the V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is 3.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.7
optixEthAggregateUniRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.13.1.255

This table implements the configurations of the logical ETH NNIs for an E-AGGR service. The NNI refers to the ETH port oriented to the packet transport network, which is used to configure ETH NNI services. According to the service carrying mode, the NNIs can be classified to: carried by port,caried by PW,carried by QinQ link

optixEthAggregateNniEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1

This entry indicates the configuration table for the NNIs of the E-AGGR service.

Indexes

optixEthAggregateIndex optixEthAggregateNniId

Column	Syntax	OID
optixEthAggregateNniId This object indicates the service V-NNI ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.1
optixEthAggregateNniRole This object indicates the role of the logical interface. 1: root 2: leaf	Enumerationr/w Enumerated Values: 1 root 2 leaf	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.2
optixEthAggregateNniType This object indicates the NNI carrier type. 1: pw 3: phyport 4: qinq	Enumerationr/w Enumerated Values: 1 pw 3 phyport 4 qinq	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.3
optixEthAggregateNniParaOne This object indicates the first parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the s…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.4
optixEthAggregateNniParaTwo This object indicates the second parameter of the carrier ID. When the carrier type is pw, this paramter is invalid and the parameter value is 0xffffffff. When the carrier type is phy port, this parameter indicates the …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.5
optixEthAggregateNniParaThree This object indicates the third parameter of the carrier ID. When the carrier type is pw, this parameter indicates the PW index. When the carrier type is phy port, this parameter indicates the port number. When the carr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.6
optixEthAggregateNniRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.14.1.255

Thistable implements the VLAN interaction function for a private line or E-AGGR service and the exchange of VLAN labelsfrom both ends of the service.

optixEthSrvVlanFdbEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1

This entry is used to configure the VLAN interaction function for ETH private line and E-AGGR services.

Indexes

optixEthSrvIndex optixEthSrvVlanFdbId

Column	Syntax	OID
optixEthSrvIndex This object indicates the index to an ETH private line or AGGR service.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.1
optixEthSrvVlanFdbId This object indicates the VLAN forwarding table ID. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.2
optixEthSrvVlanFdbInPortId This object indicates the logical input interface ID of the VLANforwarding table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.3
optixEthSrvVlanFdbInPortType This object indicates the logical input interfacetype of the VLAN forwarding table. 1: vuni 2: vnni	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.4
optixEthSrvVlanFdbInVlanId This object indicates the input VLAN ID of the VLAN forwarding table. Value range: 1 to 4094.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.5
optixEthSrvVlanFdbOutPortId This object indicates the logical output interface ID of the VLAN forwarding table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.6
optixEthSrvVlanFdbOutPortType This object indicates the logical output interface type of the VLAN forwarding table. 1: vuni 2: vnni	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.7
optixEthSrvVlanFdbOutVlanId This object indicates the output VLAN ID of the VLAN forwarding table. Value range: 1 to 4094.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.8
optixEthSrvVlanFdbRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.15.1.255

This MIB implements the configurations of the UNI VLAN filtering table for an ETH private network service. This UNI receives VLANs according to the configurations of the filtering table.

optixElanVlanFilterEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.16.1

This entry indicates the configuration table of the VLAN filtering table for ETH private network UNIs.

Indexes

optixElanIndex optixElanVlanFilterUniId

Column	Syntax	OID
optixElanVlanFilterUniId This object indicates the V-UNI ID of theprivate network service. Value range: 1 to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.2.25.4.50.3.1.16.1.1
optixElanVlanFilterVlanNum This object indicates the VLAN number of the VLAN filtering table for the service V-UNI. Value range: 0 to 4094.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.2.25.4.50.3.1.16.1.2
optixElanVlanFilterVlanlist This object indicates the list of VLANs of the V-UNI. The number of each bit indicates whether the corresponding VLAN exists. For example, The number of the third bit is 1, indicating that the VLAN ID of the PW is 3.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.2.25.4.50.3.1.16.1.3
optixElanVlanFilterRowStatus This object indicates the row status. 1: active,4: createAndGo,6: destroy	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.16.1.255

This table implements the auto-test function.

optixEthAutoTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1

This entry implements the auto-test function.

Indexes

optixEthSrvIndex

Column	Syntax	OID
optixEthAutoTestvuni This object indicates the service V-UNI ID used in the auto-test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.1
optixEthAutoTestBID This entry implements the board ID used in the auto-test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.2
optixEthAutoTestSubBID This entry implements the subboard ID used in the auto-test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.3
optixEthAutoTestPID This entry implements the port ID used in the auto-test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.4
optixEthAutoTestState This object indicates the auto-test enable status.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.5
optixEthAutoTestPort This object indicates the port information used in the auto-test.	Enumerationr/w Enumerated Values: 0 source 1 dest	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.6
optixEthAutoTestName This object indicates the auto-test name.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.7
optixEthAutoTestAction This object indicates the start or end of the auto-test.	Enumerationr/w Enumerated Values: 0 stop 1 start	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.8
optixEthAutoTestLongtermFrameSize This object indicates the frame size used in the long-term auto-test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.9
optixEthAutoTestLongtermTrafficRadio This object indicates the throughput percentage used in the long-term auto-test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.10
optixEthAutoTestLongtermAction This object indicates the start or end of the long-term auto-test.	Enumerationr/w Enumerated Values: 0 stop 1 start	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.11
optixEthAutoTestFrameLen This object indicates the frame length used in the auto-test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.22.1.12

This table implements the auto-test report.

optixEthAutoTestReportEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1

This entry implements the auto-test report.

Indexes

optixEthSrvIndex optixEthAutoTestReportNo

Column	Syntax	OID
optixEthAutoTestReportNo This object indicates the sequence number of the auto test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.1
optixEthAutoTestReportResultType This object indicates the auto-test type.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.2
optixEthAutoTestReportProgress This object indicates the auto-test progress.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.3
optixEthAutoTestReportFrameSize This object indicates the frame size in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.4
optixEthAutoTestReportTraffic This object indicates the throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.5
optixEthAutoTestReportSendPkt This object indicates the number of sent packages in the auto-test result.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.6
optixEthAutoTestReportRecPkt This object indicates the number of received packages in the auto-test result.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.7
optixEthAutoTestReportLR80 This object indicates the packet loss rate in case of 80% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.8
optixEthAutoTestReportLR90 This object indicates the packet loss rate in case of 90% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.9
optixEthAutoTestReportLR100 This object indicates the packet loss rate in case of 100% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.10
optixEthAutoTestReportDelay80 This object indicates the delay in case of 80% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.11
optixEthAutoTestReportDelay90 This object indicates the delay in case of 90% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.12
optixEthAutoTestReportDelay100 This object indicates the delay in case of 100% throughput in the auto-test result.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.13
optixEthAutoTestReportBeginTime This object indicates the auto-test start time.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.14
optixEthAutoTestReportEndTime This object indicates the auto-test end time.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.23.1.15

This table implements the query of the current MAC address quantity.

optixSrvMacEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.24.1

This entry is used to query the MAC address quantity.

Indexes

optixSrvMacSrvIndex optixSrvMacBoardID optixSrvMacTypeFlag

Column	Syntax	OID
optixSrvMacSrvIndex This object indicates the service index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.24.1.1
optixSrvMacBoardID This object indicates the board ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.24.1.2
optixSrvMacTypeFlag This object indicates the MAC address type flag.	Enumeration Enumerated Values: 0 staticmac 1 dynamicmac 2 blackmac	.1.3.6.1.4.1.2011.2.25.4.50.3.1.24.1.3
optixSrvMacNum This object indicates the number of MAC addresses.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.24.1.4

This table describes the reflector-related configurations in the RFC2544 meter-free test.

optixSrvRefCaseEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1

This entry describes the reflector-related configurations in the RFC2544 meter-free test.

Indexes

optixSrvRefCaseID

Column	Syntax	OID
optixSrvRefCaseID This parameter indicates the reflector ID in the RFC2544 meter-free test. Value range: 1 to 0xffffffff	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.1
optixSrvRefCaseFlag This parameter indicates the scene flag of the reflector in the RFC2544 meter-free test. Values: L2(1) and L3(2)	Enumerationr/w Enumerated Values: 1 l2 2 l3	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.2
optixSrvRefCaseSrvIndex This parameter indicates the service index of the reflector in the RFC2544 meter-free test. Value range: 1 to 0xffffffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.3
optixSrvRefCaseVuniType This parameter indicates the logical subinterface type for the service of the reflector in the RFC2544 meter-free test. Values: vuni(1) and vnni(2)	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.4
optixSrvRefCaseVuniID This parameter indicates the logical subinterface ID for the service of the reflector in the RFC2544 meter-free test. Value range: 1 to 65535	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.5
optixSrvRefCaseFstVlan This parameter indicates the layer-1 VLAN of the reflector in the RFC2544 meter-free test. Values: 1 to 4094	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.6
optixSrvRefCaseSecVlan This parameter indicates the layer-2 VLAN of the reflector in the RFC2544 meter-free test. Values: 1 to 4094, 0xffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.7
optixSrvRefCaseDMac This parameter indicates the MAC address of the reflector in the RFC2544 meter-free test.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.8
optixSrvRefCaseTimeOut This parameter indicates the timeout interval of the reflector in the RFC2544 meter-free test. Values: 10 to 173400, 0; default value: 14400; unit: second	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.9
optixSrvRefCaseIP This parameter indicates the simulated IP address of the reflector in the RFC2544 meter-free test.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.10
optixSrvRefCaseSrcPort This parameter indicates the UDP source port of the reflector in the RFC2544 meter-free test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.11
optixSrvRefCaseDestPort This parameter indicates the UDP destination port of the reflector in the RFC2544 meter-free test.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.12
optixSrvRefCaseState This parameter indicates the reflector status in the RFC2544 meter-free test. Values: running(0), finished(1), and ipconflict(2)	Enumeration Enumerated Values: 0 running 1 finished 2 ipconflict	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.13
optixSrvRefCaseName This parameter indicates the reflector name in the RFC2544 meter-free test.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.14
optixSrvRefCaseRowStatus This parameter indicates the row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.25.1.255

This table describes the initiator-related configurations in the RFC2544 meter-free test.

optixSrvLauCaseEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1

This entry describes the initiator-related configurations in the RFC2544 meter-free test.

Indexes

optixSrvLauCaseID

Column	Syntax	OID
optixSrvLauCaseID This parameter indicates the initiator ID in the RFC2544 meter-free test. Value range: 1 to 0xffffffff	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.1
optixSrvLauCaseSrvIndex This parameter indicates the service index of the initiator in the RFC2544 meter-free test. Value range: 1 to 0xffffffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.2
optixSrvLauCaseVuniType This parameter indicates the logical subinterface type for the service of the initiator in the RFC2544 meter-free test. Values: vuni(1) and vnni(2)	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.3
optixSrvLauCaseVuniID This parameter indicates the logical subinterface ID for the service of the initiator in the RFC2544 meter-free test. Value range: 1 to 65535	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.4
optixSrvLauCaseFstVlan This parameter indicates the layer-1 VLAN of the initiator in the RFC2544 meter-free test. Values: 1 to 4094,0xffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.5
optixSrvLauCaseSecSVlan This parameter indicates the layer-2 VLAN of the initiator in the RFC2544 meter-free test. Values: 1 to 4094, 0xffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.6
optixSrvLauCaseDMac This parameter indicates the destination MAC address of the initiator in the RFC2544 meter-free test.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.7
optixSrvLauCaseType This parameter indicates the test type of the initiator in the RFC2544 meter-free test. Values: throughput(1), packetloss(2), and delay(3)	Enumerationr/w Enumerated Values: 1 delay 2 packetloss 3 throughput	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.8
optixSrvLauCaseLoss This parameter indicates the packet loss ratio of the throughput test for the initiator in the RFC2544 meter-free test. Value range: 0 to 100; default value: 0; unit: 1/10000	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.9
optixSrvLauCasePrecision This parameter indicates the throughput test precision for the initiator in the RFC2544 meter-free test. Value range: 1 to 10000; default value: 1000; unit: kbit/s	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.10
optixSrvLauCaseRateMax This parameter indicates the upper rate threshold of the throughput test for the initiator in the RFC2544 meter-free test. Value range: 1 to port bandwidth; unit: kbit/s (The upper threshold must be equal to or larger t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.11
optixSrvLauCaseRateMin This parameter indicates the lower rate threshold of the throughput test for the initiator in the RFC2544 meter-free test. Value range: 1 to port bandwidth; unit: kbit/s (The upper threshold must be equal to or larger t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.12
optixSrvLauCaseSendRate This parameter indicates the transmit rate of the initiator in the RFC2544 meter-free test. Value range: 1 to port bandwidth; unit: kbit/s	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.13
optixSrvLauCaseIntervarTime This parameter indicates the interval for the initiator in the RFC2544 meter-free test. Value range: 1 to 60; default value: 4; unit: second	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.14
optixSrvLauCaseFstVlanpri This parameter indicates the layer-1 VLAN priority of the initiator in the RFC2544 meter-free test. Value range: 0 to 7; default value: 0	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.15
optixSrvLauCaseSecVlanpri This parameter indicates the layer-2 VLAN priority of the initiator in the RFC2544 meter-free test. Value range: 0 to 7; default value: 0	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.16
optixSrvLauCaseTestTime This parameter indicates the test time for a single packet of the initiator in the RFC2544 meter-free test. Value range: 10 to 172800; default value: 60; unit: second	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.17
optixSrvLauCaseState This parameter indicates the initiator status in the RFC2544 meter-free test. Values: running(0) and finished(1)	Enumeration Enumerated Values: 0 running 1 finished	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.18
optixSrvLauCaseName This parameter indicates the initiator name in the RFC2544 meter-free test.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.19
optixSrvLauCaseNum This parameter indicates the number of packets sent from the initiator in the RFC2544 meter-free test. Value range: 1 to 7	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.20
optixSrvLauCasePkt This parameter indicates the length of packets sent from the initiator in the RFC2544 meter-free test. Value range: 64 to 65535	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.21
optixSrvLauCaseAction This parameter indicates whether to start or stop the RFC2544 meter-free test. Values: stop(0) and start(1)	Enumerationr/w Enumerated Values: 0 stop 1 start	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.22
optixSrvLauCaseDei This parameter indicates the DEI of the initiator in the RFC2544-based meter-free throughput test. Values: 0, 1	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.23
optixSrvLauCaseRowStatus This parameter indicates the row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.26.1.255

This table describes the query-related configurations in the RFC2544 meter-free test.

optixSrvCaseResultEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1

This entry describes the query-related configurations in the RFC2544 meter-free test.

Indexes

optixSrvLauCaseID optixSrvCaseSize

Column	Syntax	OID
optixSrvCaseSize This parameter indicates the packet length of the initiator in the RFC2544 meter-free test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.1
optixSrvCaseThroughput This parameter indicates the throughput of the RFC2544 meter-free throughput test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.2
optixSrvCasePrecision This parameter indicates the precision of the RFC2544 meter-free throughput test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.3
optixSrvCaseThrougLoss This parameter indicates the packet loss ratio in the RFC2544 meter-free throughput test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.4
optixSrvCaseThroughComletion This parameter indicates the end status of the RFC2544 meter-free throughput test.Values: noResult(0), success(1), failed(2), finished(3)	Enumeration Enumerated Values: 0 noResult 1 success 2 failed 3 finished	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.5
optixSrvCaseTxRate This parameter indicates the transmit rate in the RFC2544 meter-free packet loss test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.6
optixSrvCaseRxRate This parameter indicates the receive rate in the RFC2544 meter-free packet loss test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.7
optixSrvCaseTxCount This parameter indicates the number of transmitted packets in the RFC2544 meter-free packet loss test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.8
optixSrvCaseRxCount This parameter indicates the number of received packets in the RFC2544 meter-free packet loss test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.9
optixSrvCaseLoss This parameter indicates the packet loss ratio in the RFC2544 meter-free packet loss test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.10
optixSrvCaseLossComletion This parameter indicates the end status of the RFC2544 meter-free packet loss test.Values: noResult(0), success(1), failed(2), finished(3)	Enumeration Enumerated Values: 0 noResult 1 success 2 failed 3 finished	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.11
optixSrvCaseMinRtt This parameter indicates the minimum RTT in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.12
optixSrvCaseMaxRtt This parameter indicates the maximum RTT in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.13
optixSrvCaseAvgRtt This parameter indicates the average RTT in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.14
optixSrvCaseMinJitter This parameter indicates the minimum delay in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.15
optixSrvCaseMaxJitter This parameter indicates the maximum delay in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.16
optixSrvCaseAvgJitter This parameter indicates the average delay in the RFC2544 meter-free delay test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.17
optixSrvCaseDelayComletion This parameter indicates the end status of the RFC2544 meter-free delay test. Values: noResult(0), success(1), failed(2), finished(3)	Enumeration Enumerated Values: 0 noResult 1 success 2 failed 3 finished	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.18
optixSrvCaseThroughDetail This parameter indicates the end cause of the RFC2544-based meter-free throughput test. Values: success(0), lrTooLarge(1), hrTooSmall(2), timeout(3), pingFailed(4), testFailed(5), sendFailed(6)	Enumeration Enumerated Values: 0 success 1 lrTooLarge 2 hrTooSmall 3 timeout 4 pingFailed 5 testFailed 6 sendFailed	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.19
optixSrvCaseLossDetail This parameter indicates the end cause of the RFC2544-based meter-free packet loss test. Values: success(0), lrTooLarge(1), hrTooSmall(2), timeout(3), pingFailed(4), testFailed(5), sendFailed(6)	Enumeration Enumerated Values: 0 success 1 lrTooLarge 2 hrTooSmall 3 timeout 4 pingFailed 5 testFailed 6 sendFailed	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.20
optixSrvCaseDelayDetail This parameter indicates the end cause of the RFC2544-based meter-free delay test. Values: success(0), lrTooLarge(1), hrTooSmall(2), timeout(3), pingFailed(4), testFailed(5), sendFailed(6)	Enumeration Enumerated Values: 0 success 1 lrTooLarge 2 hrTooSmall 3 timeout 4 pingFailed 5 testFailed 6 sendFailed	.1.3.6.1.4.1.2011.2.25.4.50.3.1.27.1.21

This table describes the initiator-related configurations for creating the RFC2544-based meter-free test.

optixSrvCreateLauCaseEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1

This entry describes the initiator-related configurations for creating the RFC2544-based meter-free test.

Indexes

optixSrvLauCaseID

Column	Syntax	OID
optixSrvCreateLauCaseSrvIndex This parameter indicates the service index of the initiator for creating the RFC2544-based meter-free test. Value range: 1 to 0xffffffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.1
optixSrvCreateLauCaseVuniType This parameter indicates the service logical subinterface type of the initiator for creating the RFC2544-based meter-free test. Values: vuni(1), vnni(2), and snmp0xff(255)	Enumerationr/w Enumerated Values: 1 vuni 2 vnni 255 snmp0xff	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.2
optixSrvCreateLauCaseVuniID This parameter indicates the service logical subinterface ID of the initiator for creating the RFC2544-based meter-free test. Value range: 1 to 65535	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.3
optixSrCreatevLauCaseFstVlan This parameter indicates the layer-1 VLAN of the initiator for creating the RFC2544-based meter-free test. Values: 1 to 4094, 0xffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.4
optixSrvCreateLauCaseSecSVlan This parameter indicates the layer-2 VLAN of the initiator for creating the RFC2544-based meter-free test. Values: 1 to 4094, 0xffff	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.5
optixSrvCreateLauCaseDMac This parameter indicates the destination MAC address of the initiator for creating the RFC2544-based meter-free test.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.6
optixSrvCreateLauCaseName This parameter indicates the initiator name for creating the RFC2544-based meter-free test.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.7
optixSrvCreateLauCaseRowStatus This parameter indicates the row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.30.1.255

This table indicates the configuration information of the automatic ring breaking enable status.

optixEthAutoLDEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.31.1

This entry indicates the configuration information of the automatic ring breaking enable status.

Indexes

optixEthAutoLDType

Column	Syntax	OID
optixEthAutoLDType This parameter indicates the automatic ring breaking type.0:port,1:srv	Enumeration Enumerated Values: 0 port 1 srv	.1.3.6.1.4.1.2011.2.25.4.50.3.1.31.1.1
optixEthAutoLDstate This parameter indicates the automatic ring breaking enable status.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.2011.2.25.4.50.3.1.31.1.2

This table is used to create and delete packet coloring instances.

optixCrtDelPktDropEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1

This entry is used to create and delete packet coloring instances.

Indexes

optixCrtDelPktDropTestID

Column	Syntax	OID
optixCrtDelPktDropTestID This parameter indicates the packet coloring instance ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.1
optixCrtDelPktDropTestName This parameter indicates the packet coloring instance name.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.2
optixCrtDelPktDropTestRole This parameter indicates the packet coloring test role.	Enumerationr/w Enumerated Values: 0 up 1 mid 2 down	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.3
optixCrtDelPktDropTestAction This parameter indicates the packet coloring test action.	Enumerationr/w Enumerated Values: 0 cnt 1 colcnt 2 reccnt	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.4
optixCrtDelPktDropTestTime This parameter indicates the packet coloring time.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.5
optixCrtDelPktDropTestRowStatus This parameter indicates the row status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.2.25.4.50.3.1.32.1.255

This table describes configurations about packet coloring instances.

optixPktDropEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1

This entry describes configurations about packet coloring instances.

Indexes

optixPktDropTestID

Column	Syntax	OID
optixPktDropTestID This parameter indicates the packet coloring instance ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.1
optixPktDropTestName This parameter indicates the packet coloring instance name.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.2
optixPktDropTestRole This parameter indicates the packet coloring test role.	Enumerationr/w Enumerated Values: 0 up 1 mid 2 down	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.3
optixPktDropTestAction This parameter indicates the packet coloring test action.	Enumerationr/w Enumerated Values: 0 cnt 1 colCnt 2 recCnt	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.4
optixPktDropTestTime This parameter indicates the packet coloring time.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.5
optixPktDropTestOperate This parameter indicates whether to enable/disable packet coloring.	Enumerationr/w Enumerated Values: 0 start 1 stop	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.6
optixPktDropTestState This parameter indicates the packet coloring status.	Enumeration Enumerated Values: 0 inprogress 1 stop	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.7
optixPktDropTestPktNum This parameter indicates the number of colored packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.8
optixPktDropTestPktByte This parameter indicates the number of bytes of the colored packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.9
optixPktDropTestUnPktNum This parameter indicates the number of uncolored packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.10
optixPktDropTestUnPktByte This parameter indicates the number of bytes of the uncolored packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.2.25.4.50.3.1.33.1.11

This table describes configurations about packet coloring test points.

optixPktDropPointEntry row .1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1

This entry describes configurations about packet coloring test points.

Indexes

optixPktDropTestID

Column	Syntax	OID
optixPktDropTestPointType This parameter indicates the type of the packet coloring test point.	Enumerationr/w Enumerated Values: 0 vuni 1 qinq 2 tunnel 3 phyport 255 null	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.1
optixPktDropTestDir This parameter indicates the direction where packets are colored.	Enumerationr/w Enumerated Values: 0 tx 1 rx	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.2
optixPktDropTestSrvIndex This parameter indicates the service index for packer coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.3
optixPktDropTestIFType This parameter indicates the type of the logical subinterface for packet coloring.	Enumerationr/w Enumerated Values: 1 vuni 2 vnni	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.4
optixPktDropTestIFID This parameter indicates the ID of the logical subinterface for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.5
optixPktDropVlanNum This parameter indicates the number of VLANs for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.6
optixPktDropVlanList This parameter indicates the list of VLANs for packet coloring.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.7
optixPktDropCarrierPara1 This parameter indicates Parameter 1 about service bearing for packet coloring.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.8
optixPktDropCarrierPara2 This parameter indicates Parameter 2 about service bearing for packet coloring.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.9
optixPktDropCarrierPara3 This parameter indicates Parameter 3 about service bearing for packet coloring.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.10
optixPktDropTunnelDir This parameter indicates the direction of the tunnel test point for packet coloring.	Enumerationr/w Enumerated Values: 0 tx 1 rx	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.11
optixPktDropTunnelIndex This parameter indicates the tunnel index for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.12
optixPktDropBoardID This parameter indicates the slot ID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.13
optixPktDropSubID This parameter indicates the subboard ID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.14
optixPktDropPortID This parameter indicates the port ID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.15
optixPktDropPwLabel This parameter indicates the PW label of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.16
optixPktDropTagRole This parameter indicates the service tag role of the tunnel test point for packet coloring.	Enumerationr/w Enumerated Values: 0 user 1 service	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.17
optixPktDropPwEthType This parameter indicates the PW Ethernet type of the tunnel test point for packet coloring.	Enumerationr/w Enumerated Values: 0 ethRaw 1 ethTag	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.18
optixPktDropVlanTpID This parameter indicates the VLAN TPID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.19
optixPktDropPwCw This parameter indicates the PW control word of the tunnel test point for packet coloring.	Enumerationr/w Enumerated Values: 0 notuse 1 fstuse 2 mstuse	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.20
optixPktDropUniTag This parameter indicates the UNI encapsulation of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.21
optixPktDropUniTpID This parameter indicates the UNI TPID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.22
optixPktDropSrvType This parameter indicates the service type of the tunnel test point for packet coloring.	Enumerationr/w Enumerated Values: 0 eLine 1 eLan 2 eAggr	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.23
optixPktDropStagTpID This parameter indicates the Stag TPID of the tunnel test point for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.24
optixPktDropVlanPriNum This parameter indicates the number of VLAN prioritys for packet coloring.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.25
optixPktDropVlanPriList This parameter indicates the list of VLAN prioritys for packet coloring.	OctetStringr/w	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.26
optixPktDropTunnelID This parameter indicates the tunnel ID for packet coloring.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.2.25.4.50.3.1.34.1.27