OPTIX-L2-LPT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
97

optixL2LptTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.2 · 1 row entry · 35 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptTable' 
This table describes the configurations of the L2 LPT in the point-to-multipoint mode.
optixL2LptEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1
This entry describes the configurations of the L2 LPT in the point-to-multipoint mode.
Indexes
Column Syntax OID
optixL2LptRootType
This object indicates the root parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumeration
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.1
optixL2LptRootPara1
This object indicates the root parameter1 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is pw, qinq or l2net, it takes an inval…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.2
optixL2LptRootPara2
This object indicates the root parameter 2 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type is pw, qinq or l2net, it takes an …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.3
optixL2LptRootPara3
This object indicates the root parameter 3 of the L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is pw or qinq, it indicates the PW or …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.4
optixL2LptPmpLeafType
This object indicates the leaf parameter type of the L2 LPT in the point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumeration
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.5
ooptixL2LptPmpLeafNum
This object indicates the number of L2 LPT leavesin the point-to-multipointmode. Value range: 0 to 16.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.6
optixL2LptPmpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-multipoint mode. Value range: 1 to 600 (unit: s). The default value is 1.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.7
optixL2LptPmpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-multipointmode. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.8
optixL2LptPmpOamType
This object indicates the OAM typeof the L2 LPT in the point-to-multipointmode. 0: IptOam, 1: pwOam
Enumeration
Enumerated Values:
0lptOam
1pwOam
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.9
optixL2LptPmpOamPeriod
This object indicates the OAM period of the L2 LPT in the point-to-multipoint mode. Value range: 10 to 100 (unit: ms). The default value is 10.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.10
optixL2LptPmpSwitchMode
This object indicates the switching mode of the L2 LPT in the point-to-multipoint mode. 0: strict, 1: nostrict
Enumeration
Enumerated Values:
0strict
1noStrict
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.11
optixL2LptPmpEnable
This object indicates the enable status of the L2 LPT in the point-to-multipoint mode. 0: disable, 1: enable
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.12
optixL2LptAcDefect
This object indicates the local user-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.13
optixL2LptNetDefect
This object indicates the local network-side fault. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.14
optixL2LptRemoteDefect
This object indicates the remote LPT instance fault. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.15
optixL2LptState
This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init
Enumeration
Enumerated Values:
0normal
1useFault
2networkFault
3faultRecoverWait
4faultRecover
5init
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.16
optixL2LptPeerNetType
This object indicates the protocol type of the remote L2 LPT. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumeration
Enumerated Values:
0all
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.17
optixL2LptPeerNetPara1
This object indicates the root parameter1 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is pw, qinq or l2net, it takes a…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.18
optixL2LptPeerNetPara2
This object indicates the root parameter 2 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type is pw, qinq or l2net, it ta…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.19
optixL2LptPeerNetPara3
This object indicates the root parameter 3 of the remote L2 LPT in the point-to-multipoint mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is pw or qinq, it indicates the…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.20
optixL2LptPeerVlanID
This object indicates the Pass Vlan id of the L2 LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN ID of the LPT service packets is the PV…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.21
optixL2LptPeerBid
This object indicates the Board ID of the L2 LPT.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.22
optixL2LptPeerSubid
This object indicates the Sub Board ID of the L2 LPT.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.23
optixL2LptPeerPortid
This object indicates the Port ID of the L2 LPT.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.24
optixL2LptPtpCarryType
This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumeration
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.25
optixL2LptPtpCarryIndex1
This object indicates the index 1 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is pw, qinq or l2net, it takes an invalid va…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.26
optixL2LptPtpCarryIndex2
This object indicates the index 2 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type is pw, qinq or l2net, it takes an invali…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.27
optixL2LptPtpCarryIndex3
This object indicates the index 3 to the L2 LPT carrier in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is pw or qinq, it indicates the PW or QinQ i…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.28
optixL2LptPtpEnable
This object indicates the enable status of the L2 LPT in the point-to-point mode.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.29
optixL2LptPtpWtrTime
This object indicates the WTR time of the L2 LPT in the point-to-point mode.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.30
optixL2LptPtpDelayTime
This object indicates the delay time of the L2 LPT in the point-to-point mode.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.31
optixL2LptPtpOamType
This object indicates the network fault detection mode of the L2 LPT.
Enumeration
Enumerated Values:
0lptOam
1pwOam
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.32
optixL2LptPtpOamPeriod
This object indicates the network fault detection period of the L2 LPT.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.33
optixL2LptPtpSwitchMode
This object indicates the switching mode of the L2 LPT.
Enumeration
Enumerated Values:
0strict
1nostrict
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.34
optixL2LptPtpRowStatus
This object indicates the row status of the L2 LPT.
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.2.1.255

optixL2SimpleLptSingleTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2SimpleLptSingleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2SimpleLptSingleTable' 
This table describes the mapping configurations of the L2 LPT in the point-to-multipoint mode.
optixL2SimpleLptSingleEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1
This entry describes the mapping configurations of the L2 LPT in the point-to-multipoint mode.
Indexes
Column Syntax OID
optixL2SimpleLptMainPid
This object indicates the master port of the L2 LPT mapping in the point-to-multipoint mode.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.1
optixL2SimpleLptSlvBid
This object indicates the slot ID of the slave portof the L2 LPT mapping in the point-to-multipoint mode.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.2
optixL2SimpleLptSlvSubid
This object indicates the subboard ID of the slave port of the L2 LPT mapping in the point-to-multipoint mode.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.3
optixL2SimpleLptSlvPid
This object indicates the port number of the slave port of the L2 LPT mapping in the point-to-multipoint mode. Value range: 1 to 512.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.4
optixL2SimpleLptSlvNum
This object indicates the number of slave ports of the L2 LPT mapping in the point-to-multipoint mode. Value range: 1 to 512.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.5
optixL2SimpleLptSingleRowStatus
This Row Status describes the mapping configurations of the L2 LPT in the point-to-multipoint mode.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.3.1.255

optixL2LptPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptPortTable' 
This table describes the L2 LPT port configurations.
optixL2LptPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.4.1
This entry describes the L2 LPT port configurations.
Indexes
Column Syntax OID
optixL2LptPortPid
This object indicates the L2LPT port number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.4.1.1
optixL2LptPortState
This object indicates the disable status of the L2 LPT. 0: IptClose, 1: IptOpen
Enumeration
Enumerated Values:
0lptClose
1lptOpen
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.4.1.2

optixL2LptPropertyTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.7 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptPropertyTable' 
This table describes the configurations of the L2 LPT.
optixL2LptPropertyEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1
This entry describes the configurations of the L2 LPT.
Indexes
Column Syntax OID
optixL2LptPropertyEnable
This object indicates the enable status of the L2 LPT. 0: disable, 1: enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.1
optixL2LptPropertyWtrTime
This object indicates the WTR time of the L2 LPT. Value range: 1 to 600 (unit: s). The default value is 1.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.2
optixL2LptPropertyDelayTime
This object indicates the delay time of the L2 LPT. Value range: 0 to 10000 (unit: ms). The default value is 1000 and the step length is 100.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.3
optixL2LptPropertySwitchMode
This object indicates the switching modeof the L2 LPT. 0: strict, 1: nostrict
Enumerationr/w
Enumerated Values:
0strict
1nostrict
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.4
optixL2LptPropertyOamType
This object indicates the OAM type of the L2 LPT. 0: IptOam, 1: pwOam
Enumerationr/w
Enumerated Values:
0lptOam
1pwOam
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.5
optixL2LptPropertyLptOamPeriod
This object indicates the OAM period of the L2 LPT. Value range: 10 to 100 (unit: ms). The default value is 10.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.6
optixL2LptPropertyState
This object indicates the protocol status of the L2 LPT. 0: normal, 1: useFault, 2: networkFault, 3: faultRecoverWait, 4: faultRecover, 5: init
Enumeration
Enumerated Values:
0normal
1useFault
2networkFault
3faultRecoverWait
4faultRecover
5init
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.7
optixL2LptPropertyAcDefect
This object indicates the local user-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.8
optixL2LptPropertyNetDefect
This object indicates the local network-side fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.9
optixL2LptPropertyRemoteDefect
This object indicates the remote LPT instance fault of the L2 LPT. 0: indicates that there is no fault. 1: indicates that there are faults.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.7.1.10

optixL2LptPtpTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.8 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptPtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptPtpTable' 
This table describes the configurations of the L2 LPT  in the point-to-point mode.
optixL2LptPtpEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1
This entry describes the configurations of the L2 LPT in the point-to-point mode.
Indexes
Column Syntax OID
optixL2LptPtpLeafType
This object indicates the carrier type of the L2 LPT in the point-to-point mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumerationr/w
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.1
optixL2LptPtpLeafPara1
This object indicates the parameter 1 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a slot ID. If the parameter type is pw, qinq or l2net, it takes an invalid value …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.2
optixL2LptPtpLeafPara2
This object indicates the parameter 2 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a sub-slot ID. If the parameter type is pw, qinq or l2net, it takes an invalid va…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.3
optixL2LptPtpLeafPara3
This object indicates the parameter 3 to the L2 LPT in the point-to-point mode. If the parameter type is uniport or nniport, it indicates a port ID. If the parameter type is pw or qinq, it indicates the PW or QinQ index…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.4
optixL2LptPtpL2netMyPara3
This object indicates the local parameter 3 of the L2net in the point-to-point mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.5
optixL2LptPtpL2netPeerPara3
This object indicates the peer parameter 3 of the remote L2net in the point-to-point mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.6
optixL2LptPtpL2netVlanID
This object indicates the Pass Vlan id of the remote L2net in the point-to-point mode. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN ID of …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.7
optixL2LptPtpL2netBid
This object indicates the Board ID of the remote L2net in the point-to-point mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.8
optixL2LptPtpL2netSubid
This object indicates the Sub Board ID of the remote L2net in the point-to-point mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.9
optixL2LptPtpL2netPortid
This object indicates the Port ID of the remote L2net in the point-to-point mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.10
optixL2LptPtpRowStatusExt
This object indicates the row status of the L2 LPT in the point-to-point mode.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.8.1.11

optixL2LptPmpTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.9 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptPmpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptPmpTable' 
This table describes the configurations of the L2 LPT in the point-to-multipoint mode.
optixL2LptPmpEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1
This entry describes the configurations of the L2 LPT in the point-to-multipoint mode.
Indexes
Column Syntax OID
optixL2LptPmpLeafTypeExt
This object indicates the leaf parameter type of the L2 LPT in the point-to-multipoint mode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumerationr/w
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.1
optixL2LptPmpLeafNumExt
This object indicates the number of L2 LPT in the point-to-multipointmode. Value range: 0 to 16.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.2
optixL2LptPmpLeafParaList
This object indicates the leaf parameter of the L2 LPT in the point-to-multipoint mode.
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.3
optixL2LptPmpL2netMyPara3
This object indicates the local parameter 3 of the L2net in the point-to-multipoint mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.4
optixL2LptPmpL2netPeerPara3
This object indicates the peer parameter 3 of the remote L2net in the point-to-multipoint mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.5
optixL2LptPmpL2netVlanID
This object indicates the Pass Vlan id of the remote L2net in the point-to-multipoint mode. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN I…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.6
optixL2LptPmpL2netBid
This object indicates the Board ID of the remote L2net in the point-to-multipointmode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.7
optixL2LptPmpL2netSubid
This object indicates the Sub Board ID of the remote L2net in the point-to-multipoint mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.8
optixL2LptPmpL2netPortid
This object indicates the Port ID of the remote L2net in the point-to-multipointmode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.9
optixL2LptPmpRowStatus
This object indicates the row status of the L2 LPT in the point-to-multipointmode.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.9.1.255

optixL2SimpleLptTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2SimpleLptTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2SimpleLptTable' 
This table describes the mapping configurations of the Simple Lpt.
optixL2SimpleLptEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.10.1
This entry describes the mapping configurations of the Simple Lpt.
Indexes
Column Syntax OID
optixL2SimpleLptSlaveNum
This object indicates the number of slave ports of the Simple LPT. Value range: 1 to 512.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.10.1.1
optixL2SimpleLptSlaveList
This object indicates the slave port list of the Simple Lpt. &amp;amp; is used to separate multiple lists. For example, 3 &amp;amp; 25 &amp;amp; 1 &amp;amp; 3 &amp;amp; 255 &amp;amp; 2.
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.10.1.2
optixL2SimpleLptAction
This object indicates the action of the Simple LPT.
Enumerationr/w
Enumerated Values:
1add
2delete
255noaction
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.10.1.3
optixL2SimpleLptRowStatus
This object indicates the row status of the Simple LPT.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.10.1.255

optixL2LptL2netTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.11 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptL2netTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptL2netTable' 
This table describes the configurations of the L2Net LPT .
optixL2LptL2netEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1
This entry describes the configurations of the L2Net LPT .
Indexes
Column Syntax OID
optixL2LptL2netMyType
This object indicates the My type of the L2Net LPT. 5: l2net
Enumeration
Enumerated Values:
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.1
optixL2LptL2netPeerType
This object indicates the peer type of theL2Net LPT. 5: l2net
Enumerationr/w
Enumerated Values:
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.2
optixL2LptL2netPeerPara1
This object indicates the peer parameter1 of the L2Net LPT. If the parameter type is l2net, it takes an invalid value (4294967295).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.3
optixL2LptL2netPeerPara2
This object indicates the peer parameter 2 of the L2Net LPT. If the parameter type is l2net, it takes an invalid value (4294967295).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.4
optixL2LptL2netPeerPara3
This object indicates the peer parameter 3 of the L2Net LPT. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.5
optixL2LptL2netVlanID
This object indicates the Vlan id of the L2Net LPT. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that the VLAN ID of the LPT service packets is the PV I…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.6
optixL2LptL2netBid
This object indicates the Board ID of the L2Net LPT.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.7
optixL2LptL2netSubid
This object indicates the Sub Board ID of the L2Net LPT.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.8
optixL2LptL2netPortid
This object indicates the Port ID of the L2Net LPT.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.11.1.9

optixL2LptLeafTable

table
.1.3.6.1.4.1.2011.2.25.4.50.20.1.12 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixL2LptLeafTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-L2-LPT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-L2-LPT-MIB::optixL2LptLeafTable' 
This table describes the configurations of the L2 LPT in the  leaf of point-to-multipoint mode.
optixL2LptLeafEntry row .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1
This entry describes the configurations of the L2 LPT in the leaf of point-to-multipoint mode.
Indexes
Column Syntax OID
optixL2LptLeafType
This object indicates the leaf parameter type of the L2 LPT in the leaf of point-to-multipointmode. 1: uniport, 2: pw, 3: qinq, 4: nniport, 5: l2net
Enumerationr/w
Enumerated Values:
1uniport
2pw
3qinq
4nniport
5l2net
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.1
optixL2LptLeafNum
This object indicates the number of L2 LPT in the leaf of point-to-multipoint mode. Value range: 0 to 16.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.2
optixL2LptLeafParaList
This object indicates the leaf parameter of the L2 LPT in the leaf of point-to-multipoint mode.
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.3
optixL2LptLeafL2netMyPara3
This object indicates the local parameter 3 of the L2net in the leaf of point-to-multipoint mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.4
optixL2LptLeafL2netPeerPara3
This object indicates the peer parameter 3 of the remote L2net in the leaf of point-to-multipoint mode. Value range: 1 to 0xffffffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.5
optixL2LptLeafL2netVlanID
This object indicates the Pass Vlan id of the remote L2net in the leaf of point-to-multipoint mode. Value range: 1 to 4094 (valid values). This parameter can also be set to 0xFFFF (the default value), indicating that th…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.6
optixL2LptLeafL2netBid
This object indicates the Board ID of the remote L2net in the leaf of point-to-multipoint mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.7
optixL2LptLeafL2netSubid
This object indicates the Sub Board ID of the remote L2net in the leaf of point-to-multipoint mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.8
optixL2LptLeafL2netPortid
This object indicates the Port ID of the remote L2net in the leaf of point-to-multipoint mode.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.9
optixL2LptLeafRowStatus
This object indicates the row status of the L2 LPT in the leaf of point-to-multipoint mode.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.20.1.12.1.255