OPTIX-CFMOAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
80

optixCfmoamMdTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamMdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamMdTable' 
This table describes the basic MD configuration information of the Layer 2 802.1ag protocol.
optixCfmoamMdEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.1.1
This entry describes the basic MD configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamMdId
This object indicates the MD index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967040.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.1.1.1
optixCfmoamMdName
This object indicates the MD name of the 802.1ag protocol.
OctetStringr/w
Constraints:
range: 0-22
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.1.1.2
optixCfmoamMdLevel
This object indicates the MD level of the 802.1ag protocol. Value range: 0 to 7. A larger value indicates a higher level.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.1.1.3
optixCfmoamRowStatus
This object indicates the row status of the 802.1ag protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.1.1.255

optixCfmoamMaTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.2 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamMaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamMaTable' 
This table describes the basic MA configuration information of the Layer 2 802.1ag protocol.
optixCfmoamMaEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1
This entry describes the basic MA configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamMaId
This object indicates the MA index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967040.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.1
optixCfmoamMaName
This object indicates the MA name of the 802.1ag protocol.
OctetStringr/w
Constraints:
range: 0-22
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.2
optixCfmoamMaServeId
This object indicates the service index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967294.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.3
optixCfmoamMaCcperiod
This object indicates the CC period of the 802.1ag protocol. 1: 3.33 ms, 2: 10 ms, 3: 100 ms, 4: 1s (default), 5: 10s, 6: 1 minute, 7: 10 minutes
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.4
optixCfmoamMaRmepList
This object indicates the MEP list of the 802.1ag protocol.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.5
optixCfmoamMaStandard
This object indicates the standand of the 802.1ag protocol. 1: 802.1ag, 2: Y.1731
Enumerationr/w
Enumerated Values:
1snmp8021Ag
2snmpY1731
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.6
optixCfmoamMaIDFormat
This object indicates the ID format of the 802.1ag protocol. 32: icc
Enumerationr/w
Enumerated Values:
32icc
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.7
optixCfmoamMaIDVlaue
This object indicates the ID vlaue of the 802.1ag protocol. The maximum value is 45 bytes.
OctetStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.8
optixCfmoamMaRowStatus
This object indicates the MA row status of the 802.1ag protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.2.1.255

optixCfmoamMepTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.3 · 1 row entry · 19 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamMepTable' 
This table describes the basic MEP configuration information of the Layer 2 802.1ag protocol.
optixCfmoamMepEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1
This entry describes the basic MEP configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamMepId
This object indicates the MEP ID of the 802.1ag protocol. Value range: 1 to 8191.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.1
optixCfmoamMepDirect
This object indicates the MEP direction of the 802.1ag protocol. 1: ingress, 2: egress
Enumerationr/w
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.2
optixCfmoamMepLogicPortType
This object indicates the logical port type of the 802.1ag protocol. 1: V-UNI, 2: V-NNI
Enumerationr/w
Enumerated Values:
1vuni
2vnni
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.3
optixCfmoamMepLogicPortid
This object indicates the logical port number of the 802.1ag protocol. If the logical port type is V-NNI, the bearer type must be PHY port or QinQ link.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.4
optixCfmoamMepVlan
This object indicates the VLAN of the 802.1ag protocol. Value range: 1 to 4094. If services are carried by ports, this parameter must be set to 0xffff.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.5
optixCfmoamMepCcStatus
This object indicates the CC status of the 802.1ag protocol. 1: enable, 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.6
optixCfmoamMepAisStatus
This object indicates the enable status of inserting ETH AIS for the 802.1ag protocol. 1: enable, 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.7
optixCfmoamMepClientLevel
This object indicates the MD level of the AIS insertion object for the 802.1ag protocol. Value range: 0 to 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.8
optixCfmoamMepAisPrd
This object indicates the retransmission period of the ETH AIS packets forthe802.1ag protocol.1:second,2:minute
Enumerationr/w
Enumerated Values:
1second
2minute
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.9
optixCfmoamMepLmRmepId
Eline matching remote maintenance point. Value range: 1 to 8191.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.10
optixCfmoamMepLmRule
Eline LM matching rule
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.11
optixCfmoamMepServeId
This object indicates the service index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967294.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.12
optixCfmoamMepEthbnStatus
This parameter indicates whether IEEE 802.1ag-compliant MEP bandwidth notification is enabled. Its value is disable (0, default) or enable(1).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.13
optixCfmoamMepEthbnLevel
This parameter indicates the MD level of an IEEE 802.1ag-compliant bandwidth notification object. Its value range is 0-7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.14
optixCfmoamMepPeriodType
This parameter indicates the period type for IEEE 802.1ag-compliant MEP bandwidth notification. Its value is period(1) or nonperiod(2).
Enumerationr/w
Enumerated Values:
1period
2nonperiod
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.15
optixCfmoamMepPeriod
This parameter indicates the period for IEEE 802.1ag-compliant MEP bandwidth notification. Its value is 1s (default value), 10s, or 60s.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.16
optixCfmoamMepHoldTime
This parameter indicates the IEEE 802.1ag-compliant MEP bandwidth hold time. Its value range is 0-10s. Its default value is 0s.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.17
optixCfmoamMepPaketLen
This parameter indicates the IEEE 802.1ag-compliant MEP bandwidth notification packet length. Its value range is 64-9600. Its default value is 64.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.18
optixCfmoamMepRowStatus
This object indicates the MEP row status of the 802.1ag protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.3.1.255

optixCfmoamMipTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamMipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamMipTable' 
This table describes the basic MIP configuration information of the Layer 2 802.1ag protocol.
optixCfmoamMipEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1
This entry describes the basic MIP configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamMipId
This object indicates the MIP ID of the 802.1ag protocol. Value range: 1 to 8191.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1.1
optixCfmoamMipBoardId
This object indicates the slot ID of the 802.1ag protocol.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1.2
optixCfmoamMipSubboardId
This object indicates the subboard ID of the 802.1ag protocol.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1.3
optixCfmoamMipPortId
This object indicates the port numberof the 802.1ag protocol.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1.4
optixCfmoamMipRowStatus
This object indicates the MIP row status of the 802.1ag protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.4.1.255

optixCfmoamTestIDTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.5 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamTestIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamTestIDTable' 
This table describes the basic TESTID configuration information of the Layer 2 Y.1731 protocol.
optixCfmoamTestIDEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1
This entry describes the basic TESTID configuration information of the Layer 2 Y.1731 protocol.
Indexes
Column Syntax OID
optixCfmoamTestId
This object indicates the TEST index of the Y.1731 protocol.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.1
optixCfmoamTestIDRmepId
This object indicates the remote MEP ID of the Y.1731 protocol. Value range: 1 to 8191.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.2
optixCfmoamTestIDInPri
This object indicates the ingress direction pri of the Y.1731 protocol. Value range: 0 to 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.3
optixCfmoamTestIDOutPri
This object indicates the engress direction pri of the Y.1731 protocol. Value range: 0 to 7.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.4
optixCfmoamTestIDForwardMACLrn
This object indicates the ForwardMAC learn of the Y.1731 protocol. 1: enable, 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.5
optixCfmoamTestIDCfgForwardMAC
This object indicates the User configure ForwardMAC of the Y.1731 protocol.
OctetStringr/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.6
optixCfmoamTestIDBackwardMACLrn
This object indicates the BackwardMAC learn of the Y.1731 protocol. 1: enable, 0: disable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.7
optixCfmoamTestIDCfgBackwardMAC
This object indicates the User configure BackwardMAC of the Y.1731 protocol.
OctetStringr/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.8
optixCfmoamTestIDForwardMAC
This object indicates the ForwardMAC of the Y.1731 protocol(if learn mode,it's learned ForwardMAC,else it's User configure ForwardMAC).
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.9
optixCfmoamTestIDBackwardMAC
This object indicates the BackwardMAC of the Y.1731 protocol(if learn mode,it's learned BackwardMAC,else it's User configure BackwardMAC).
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.10
optixCfmoamTestIDMode
This object indicates the work mode of the Y.1731 protocol. 255: invalid, 0: active, 1: passive
Enumerationr/w
Enumerated Values:
0active
1passive
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.11
optixCfmoamTestIDRowStatus
This object indicates the row status of the Y.1731 protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.5.1.255

optixCfmoamRmepTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamRmepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamRmepTable' 
This table describes the basic RMEP configuration information of the Layer 2 802.1ag protocol.
optixCfmoamRmepEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.6.1
This entry describes the basic RMEP configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamRmepNum
This object indicates the RMEP number of the 802.1ag protocol. Value range: 0 to 2048.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.6.1.1
optixCfmoamRmepList
This object indicates the RMEP list of the 802.1ag protocol. Value range: 1 to 8191. Use &amp;amp; to connect multiple values. For example, 1&amp;amp;2&amp;amp;3
OctetStringr/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.6.1.2
optixCfmoamRmepRowStatus
This object indicates the RMEP row status of the 802.1ag protocol.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.6.1.255

optixCfmoamLbTestTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamLbTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamLbTestTable' 
This table describes Start LB test of the Layer 2 802.1ag protocol.
optixCfmoamLbTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1
This entry describes Start LB test of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamLbTestDmepType
Query invalid,Dest mark type of Start LB test. 1: MEP ID, 2: MAC
Enumerationr/w
Enumerated Values:
1mepid
2mac
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.1
optixCfmoamLbTestMAC
Query invalid,MEPID or MAC of Start LB test
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.2
optixCfmoamLbTestPackNum
Query invalid,packet number of Start LB test ,bound(1~65535),default:3
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.3
optixCfmoamLbTestLength
Query invalid,packet length of Start LB test ,bound(64~0xffff),default:64
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.4
optixCfmoamLbTestPriority
Query invalid,packet priority of Start LB test ,bound(0~7),default:7
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.5
optixCfmoamLbTestStop
Query invalid,be uset to stop LB test
Enumerationr/w
Enumerated Values:
0stop
255invalid
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.7.1.6

optixCfmoamLtTestTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.8 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamLtTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamLtTestTable' 
This table describes Start LT test of the Layer 2 802.1ag protocol.
optixCfmoamLtTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1
This entry describes Start LT test of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamLtTestDestMpType
Dest mark type of Start LT test. 1: MEP ID, 2: MAC
Enumeration
Enumerated Values:
1mepid
2mac
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.1
optixCfmoamLtTestMAC
MEPID or MAC of Start LT test. The sink MEP ID ranges from 1 to 8191. The MAC address of the sink MEP must not be a multicast MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.2
optixCfmoamLtTestLSRIP
device IP address of LT test
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.3
optixCfmoamLtTestMEPMAC
mep mac address of LT test
OctetString .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.4
optixCfmoamLtTestBoardID
boardid of LT test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.5
optixCfmoamLtTestSubBoardID
subboardid of LT test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.6
optixCfmoamLtTestPortID
portid of LT test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.7
optixCfmoamLtTestHop
the top of source mep to dest mep of LT test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.8
optixCfmoamLtTestResult
result of LT test(0:success 1:failure).
Enumeration
Enumerated Values:
0success
1fail
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.8.1.9

optixCfmoamGetMepOnPortTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamGetMepOnPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamGetMepOnPortTable' 
This table describes the basic MEP configuration information of the Layer 2 802.1ag protocol.
optixCfmoamGetMepOnPortEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1
This entry describes the basic MEP configuration information of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamOnPortMdId
This object indicates the MD index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967040.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.1
optixCfmoamOnPortMdName
This object indicates the MD name of the 802.1ag protocol.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.2
optixCfmoamOnPortMaId
This object indicates the MA index of the 802.1ag protocol. The index is numbered globally on an NE. Value range: 1 to 4294967040.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.3
optixCfmoamOnPortMaName
This object indicates the MA name of the 802.1ag protocol.
OctetString .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.4
optixCfmoamOnPortMepId
This object indicates the MEP ID of the 802.1ag protocol. Value range: 1 to 8191.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.5
optixCfmoamOnPortMepDirect
This object indicates the MEP direction of the 802.1ag protocol. 1: ingress, 2: egress
Enumeration
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.11.1.6

optixCfmoamExtLbTestTable

table
.1.3.6.1.4.1.2011.2.25.4.50.15.1.12 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk optixCfmoamExtLbTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPTIX-CFMOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPTIX-CFMOAM-MIB::optixCfmoamExtLbTestTable' 
This table describes Start LB test of the Layer 2 802.1ag protocol.
optixCfmoamExtLbTestEntry row .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1
This entry describes Start LB test of the Layer 2 802.1ag protocol.
Indexes
Column Syntax OID
optixCfmoamExtLbTestDmepType
Invalid query. Identifier type of the sink-end MEP that initiates the MEP LB test. 1: MEP ID; 2: MAC address
Enumerationr/w
Enumerated Values:
1mepid
2mac
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.1
optixCfmoamExtLbTestMAC
Invalid query. ID or MAC address of the MEP that initiates the MEP LB test.
OctetStringr/w .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.2
optixCfmoamExtLbTestPackNum
Invalid query. Number of transmitted packets for initiating the MEP LB test. (Value range: 1-65535; Default value: 3)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.3
optixCfmoamExtLbTestLength
Invalid query. Number of transmitted packets for initiating the MEP LB test. (Value range: 1-65535; Default value: 3)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.4
optixCfmoamExtLbTestPriority
Invalid query. Length of transmitted packets for initiating the MEP LB test. (Value range: 64-0xffff; Default value: 64)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.5
optixCfmoamExtLbTestVlan
Invalid query. VLAN ID of transmitted packets for initiating the MEP LB test. (Value range: 0-0xffe; Default value: 0)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.6
optixCfmoamExtLbTestMode
Invalid query. Packet payload mode for initiating the MEP LB test. (Value range: 0-2; Default value: 0)
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.2.25.4.50.15.1.12.1.7