OPT-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
47
Rows
47
Columns
322
.1.3.6.1.2.1.10.133.1.1.1 · 1 row entry · 6 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTMnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTMnTable'
A table of OTMn structure information.
optIfOTMnEntry row .1.3.6.1.2.1.10.133.1.1.1.1
A conceptual row that contains the OTMn structure
information of an optical interface.
Indexes
Column Syntax OID
optIfOTMnOrderThis object indicates the order of the OTM, which
represents the maximum number of wavelengths that can be
supported at the bit rate(s) supported on the interface.
Unsigned32
Constraints:
range: 1-900
.1.3.6.1.2.1.10.133.1.1.1.1.1
optIfOTMnReducedThis object indicates whether a reduced or full
functionality is supported at the interface. A value of
true means reduced. A value of false means full.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.1.1.1.2
optIfOTMnBitRatesThis attribute is a bit map representing the bit
rate or set of bit rates supported on the interface.
The meaning of each bit position is as follows:
bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
bitRateK2…
Bits
Enumerated Values:
0bitRateK1
1bitRateK2
2bitRateK3
.1.3.6.1.2.1.10.133.1.1.1.1.3
optIfOTMnInterfaceTypeThis object identifies the type of interface. The value of
this attribute will affect the behavior of the OTM with
respect to presence/absence of OTM Overhead Signal (OOS)
processing and TCM activation. For an IrDI in…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.133.1.1.1.1.4
optIfOTMnTcmMaxThis object identifies the maximum number of TCM
levels allowed for any Optical Channel contained
in this OTM. A new TCM activation will be rejected
if the requested level is greater than the threshold.
If InterfaceTyp…
Unsigned32r/w
Constraints:
range: 0-6
.1.3.6.1.2.1.10.133.1.1.1.1.5
optIfOTMnOpticalReachThis object indicates the length the optical signal
may travel before requiring termination or regeneration.
The meaning of the enumeration are:
intraOffice(1) - intra-office (as defined in ITU-T G.957)
shortHaul(2…
Enumeration
Enumerated Values:
1intraOffice
2shortHaul
3longHaul
4veryLongHaul
5ultraLongHaul
.1.3.6.1.2.1.10.133.1.1.1.1.6
.1.3.6.1.2.1.10.133.1.2.1 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfPerfMonIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfPerfMonIntervalTable'
A table of 15-minute performance monitoring interval
information.
optIfPerfMonIntervalEntry row .1.3.6.1.2.1.10.133.1.2.1.1
A conceptual row that contains 15-minute performance
monitoring interval information of an interface.
Indexes
Column Syntax OID
optIfPerfMonCurrentTimeElapsedNumber of seconds elapsed in the current 15-minute
performance monitoring interval.
If, for some reason, such as an adjustment in the NE's
time-of-day clock, the number of seconds elapsed exceeds
the maximum value, then…
secondsUnsigned32
Constraints:
range: 0-900
.1.3.6.1.2.1.10.133.1.2.1.1.1
optIfPerfMonCurDayTimeElapsedNumber of seconds elapsed in the current 24-hour interval
performance monitoring period.
If, for some reason, such as an adjustment in the NE's
time-of-day clock, the number of seconds elapsed exceeds
the maximum value,…
secondsUnsigned32
Constraints:
range: 0-86400
.1.3.6.1.2.1.10.133.1.2.1.1.2
optIfPerfMonIntervalNumIntervalsThe number of 15-minute intervals for which performance
monitoring data is available. The number is the same for all
the associated sub layers of the interface.

An optical interface must be capable of su…
Unsigned32
Constraints:
range: 0-96
.1.3.6.1.2.1.10.133.1.2.1.1.3
optIfPerfMonIntervalNumInvalidIntervalsThe number of intervals in the range from 0 to
optIfPerfMonIntervalNumIntervals for which no performance
monitoring data is available and/or the data is invalid.
Unsigned32
Constraints:
range: 0-96
.1.3.6.1.2.1.10.133.1.2.1.1.4
.1.3.6.1.2.1.10.133.1.3.1 · 1 row entry · 10 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnConfigTable'
A table of OTSn configuration information.
optIfOTSnConfigEntry row .1.3.6.1.2.1.10.133.1.3.1.1
A conceptual row that contains OTSn configuration
information of an interface.
Indexes
Column Syntax OID
optIfOTSnDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.3.1.1.1
optIfOTSnAprStatusThis attribute indicates the status of the Automatic
Power Reduction (APR) function of the entity. Valid
values are 'on' and 'off'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.133.1.3.1.1.2
optIfOTSnAprControlThis object is a UTF-8 encoded string that specifies Automatic
Power Reduction (APR) control actions requested of this entity
(when written) and that returns the current APR control state
of this entity (when read). Th…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.133.1.3.1.1.3
optIfOTSnTraceIdentifierTransmittedThe trace identifier transmitted.
This object is applicable when optIfOTSnDirectionality has the
value source(2) or bidirectional(3).
This object does not apply to reduced-capability systems (i.e.,
those for which optIf…
OptIfTxTIr/w
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.3.1.1.4
optIfOTSnDAPIExpectedThe DAPI expected by the receiver.
This object is applicable when optIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect if
optIfOTSnTIMDetMode has the value off(1) or sapi(3).
This object …
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.3.1.1.5
optIfOTSnSAPIExpectedThe SAPI expected by the receiver.
This object is applicable when optIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect if
optIfOTSnTIMDetMode has the value off(1) or dapi(2).
This object …
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.3.1.1.6
optIfOTSnTraceIdentifierAcceptedThe actual trace identifier received.
This object is applicable when optIfOTSnDirectionality has the
value sink(1) or bidirectional(3). Its value is unspecified
if optIfOTSnCurrentStatus has either or both of the
losO(…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.3.1.1.7
optIfOTSnTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. This object is applicable
when optIfOTSnDirectionality has the value sink(1)
or bidirectional(3). The default value is off(1).
This object …
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.3.1.1.8
optIfOTSnTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. This object
is applicable when optIfOTSnDirectionality has the
value sink(1) or bidirectional(3). It has no effect
when the …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.1.1.9
optIfOTSnCurrentStatusIndicates the defect condition of the entity, if any.
This object is applicable when optIfOTSnDirectionality
has the value sink(1) or bidirectional(3). In
reduced-capability systems or at IrDI interfaces
the only bit p…
Bits
Enumerated Values:
0bdiP
1bdiO
2bdi
3tim
4losP
5losO
6los
.1.3.6.1.2.1.10.133.1.3.1.1.10
.1.3.6.1.2.1.10.133.1.3.2 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSinkCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSinkCurrentTable'
A table of OTSn sink performance monitoring information for
the current 15-minute interval.
optIfOTSnSinkCurrentEntry row .1.3.6.1.2.1.10.133.1.3.2.1
A conceptual row that contains OTSn sink performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOTSnSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.2.1.1
optIfOTSnSinkCurrentInputPowerThe optical power monitored at the input.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.2
optIfOTSnSinkCurrentLowInputPowerThe lowest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.3
optIfOTSnSinkCurrentHighInputPowerThe highest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.4
optIfOTSnSinkCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If
optIfOTSnSinkCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.5
optIfOTSnSinkCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If
optIfOTSnSinkCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.6
optIfOTSnSinkCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.7
optIfOTSnSinkCurrentLowOutputPowerThe lowest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.8
optIfOTSnSinkCurrentHighOutputPowerThe highest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.9
optIfOTSnSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOTSnSinkCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.10
optIfOTSnSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.2.1.11
.1.3.6.1.2.1.10.133.1.3.3 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSinkIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSinkIntervalTable'
A table of historical OTSn sink performance monitoring
information.
optIfOTSnSinkIntervalEntry row .1.3.6.1.2.1.10.133.1.3.3.1
A conceptual row that contains OTSn sink performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOTSnSinkIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.3.3.1.1
optIfOTSnSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.3.1.2
optIfOTSnSinkIntervalLastInputPowerThe last optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.3
optIfOTSnSinkIntervalLowInputPowerThe lowest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.4
optIfOTSnSinkIntervalHighInputPowerThe highest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.5
optIfOTSnSinkIntervalLastOutputPowerThe last optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.6
optIfOTSnSinkIntervalLowOutputPowerThe lowest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.7
optIfOTSnSinkIntervalHighOutputPowerThe highest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.3.1.8
.1.3.6.1.2.1.10.133.1.3.4 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSinkCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSinkCurDayTable'
A table of OTSn sink performance monitoring information for
the current 24-hour interval.
optIfOTSnSinkCurDayEntry row .1.3.6.1.2.1.10.133.1.3.4.1
A conceptual row that contains OTSn sink performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOTSnSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.4.1.1
optIfOTSnSinkCurDayLowInputPowerThe lowest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.4.1.2
optIfOTSnSinkCurDayHighInputPowerThe highest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.4.1.3
optIfOTSnSinkCurDayLowOutputPowerThe lowest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.4.1.4
optIfOTSnSinkCurDayHighOutputPowerThe highest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.4.1.5
.1.3.6.1.2.1.10.133.1.3.5 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSinkPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSinkPrevDayTable'
A table of OTSn sink performance monitoring information for
the previous 24-hour interval.
optIfOTSnSinkPrevDayEntry row .1.3.6.1.2.1.10.133.1.3.5.1
A conceptual row that contains OTSn sink performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOTSnSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.5.1.1
optIfOTSnSinkPrevDayLastInputPowerThe last optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.2
optIfOTSnSinkPrevDayLowInputPowerThe lowest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.3
optIfOTSnSinkPrevDayHighInputPowerThe highest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.4
optIfOTSnSinkPrevDayLastOutputPowerThe last optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.5
optIfOTSnSinkPrevDayLowOutputPowerThe lowest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.6
optIfOTSnSinkPrevDayHighOutputPowerThe highest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.5.1.7
.1.3.6.1.2.1.10.133.1.3.6 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSrcCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSrcCurrentTable'
A table of OTSn source performance monitoring information for
the current 15-minute interval.
optIfOTSnSrcCurrentEntry row .1.3.6.1.2.1.10.133.1.3.6.1
A conceptual row that contains OTSn source performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOTSnSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.6.1.1
optIfOTSnSrcCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.2
optIfOTSnSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.3
optIfOTSnSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.4
optIfOTSnSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOTSnSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.5
optIfOTSnSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.6
optIfOTSnSrcCurrentInputPowerThe optical power monitored at the input.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.7
optIfOTSnSrcCurrentLowInputPowerThe lowest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.8
optIfOTSnSrcCurrentHighInputPowerThe highest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.9
optIfOTSnSrcCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If
optIfOTSnSrcCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.10
optIfOTSnSrcCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If
optIfOTSnSrcCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.6.1.11
.1.3.6.1.2.1.10.133.1.3.7 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSrcIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSrcIntervalTable'
A table of historical OTSn source performance monitoring
information.
optIfOTSnSrcIntervalEntry row .1.3.6.1.2.1.10.133.1.3.7.1
A conceptual row that contains OTSn source performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOTSnSrcIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.3.7.1.1
optIfOTSnSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.7.1.2
optIfOTSnSrcIntervalLastOutputPowerThe last optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.3
optIfOTSnSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.4
optIfOTSnSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.5
optIfOTSnSrcIntervalLastInputPowerThe last optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.6
optIfOTSnSrcIntervalLowInputPowerThe lowest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.7
optIfOTSnSrcIntervalHighInputPowerThe highest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.7.1.8
.1.3.6.1.2.1.10.133.1.3.8 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSrcCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSrcCurDayTable'
A table of OTSn source performance monitoring information for
the current 24-hour interval.
optIfOTSnSrcCurDayEntry row .1.3.6.1.2.1.10.133.1.3.8.1
A conceptual row that contains OTSn source performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOTSnSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.8.1.1
optIfOTSnSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.8.1.2
optIfOTSnSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.8.1.3
optIfOTSnSrcCurDayLowInputPowerThe lowest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.8.1.4
optIfOTSnSrcCurDayHighInputPowerThe highest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.8.1.5
.1.3.6.1.2.1.10.133.1.3.9 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTSnSrcPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTSnSrcPrevDayTable'
A table of OTSn source performance monitoring information for
the previous 24-hour interval.
optIfOTSnSrcPrevDayEntry row .1.3.6.1.2.1.10.133.1.3.9.1
A conceptual row that contains OTSn source performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOTSnSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.3.9.1.1
optIfOTSnSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.2
optIfOTSnSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.3
optIfOTSnSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.4
optIfOTSnSrcPrevDayLastInputPowerThe last optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.5
optIfOTSnSrcPrevDayLowInputPowerThe lowest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.6
optIfOTSnSrcPrevDayHighInputPowerThe highest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.3.9.1.7
.1.3.6.1.2.1.10.133.1.4.1 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnConfigTable'
A table of OMSn configuration information.
optIfOMSnConfigEntry row .1.3.6.1.2.1.10.133.1.4.1.1
A conceptual row that contains OMSn configuration
information of an interface.
Indexes
Column Syntax OID
optIfOMSnDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.4.1.1.1
optIfOMSnCurrentStatusIndicates the defect condition of the entity, if any.
This object is applicable only to full capability
systems whose interface type is IaDI and for which

optIfOMSnDirectionality has the value sink(1) or
…
Bits
Enumerated Values:
0ssfP
1ssfO
2ssf
3bdiP
4bdiO
5bdi
6losP
.1.3.6.1.2.1.10.133.1.4.1.1.2
.1.3.6.1.2.1.10.133.1.4.2 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSinkCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSinkCurrentTable'
A table of OMSn sink performance monitoring information for
the current 15-minute interval.
optIfOMSnSinkCurrentEntry row .1.3.6.1.2.1.10.133.1.4.2.1
A conceptual row that contains OMSn sink performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOMSnSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.2.1.1
optIfOMSnSinkCurrentAggregatedInputPowerThe aggregated optical power of all the DWDM input
channels.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.2
optIfOMSnSinkCurrentLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.3
optIfOMSnSinkCurrentHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.4
optIfOMSnSinkCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If
optIfOMSnSinkCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.5
optIfOMSnSinkCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If
optIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.6
optIfOMSnSinkCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.7
optIfOMSnSinkCurrentLowOutputPowerThe lowest optical power monitored at the output
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.8
optIfOMSnSinkCurrentHighOutputPowerThe highest optical power monitored at the output
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.9
optIfOMSnSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOMSnSinkCurrentOutputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.10
optIfOMSnSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOMSnSinkCurrentOutputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.2.1.11
.1.3.6.1.2.1.10.133.1.4.3 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSinkIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSinkIntervalTable'
A table of historical OMSn sink performance monitoring
information.
optIfOMSnSinkIntervalEntry row .1.3.6.1.2.1.10.133.1.4.3.1
A conceptual row that contains OMSn sink performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOMSnSinkIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.4.3.1.1
optIfOMSnSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.3.1.2
optIfOMSnSinkIntervalLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input
channels during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.3
optIfOMSnSinkIntervalLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.4
optIfOMSnSinkIntervalHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.5
optIfOMSnSinkIntervalLastOutputPowerThe last optical power at the output
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.6
optIfOMSnSinkIntervalLowOutputPowerThe lowest optical power at the output
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.7
optIfOMSnSinkIntervalHighOutputPowerThe highest optical power at the output
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.3.1.8
.1.3.6.1.2.1.10.133.1.4.4 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSinkCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSinkCurDayTable'
A table of OMSn sink performance monitoring information for
the current 24-hour interval.
optIfOMSnSinkCurDayEntry row .1.3.6.1.2.1.10.133.1.4.4.1
A conceptual row that contains OMSn sink performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOMSnSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.4.1.1
optIfOMSnSinkCurDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.4.1.2
optIfOMSnSinkCurDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.4.1.3
optIfOMSnSinkCurDayLowOutputPowerThe lowest optical power at the output
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.4.1.4
optIfOMSnSinkCurDayHighOutputPowerThe highest optical power at the output
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.4.1.5
.1.3.6.1.2.1.10.133.1.4.5 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSinkPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSinkPrevDayTable'
A table of OMSn sink performance monitoring information for
the previous 24-hour interval.
optIfOMSnSinkPrevDayEntry row .1.3.6.1.2.1.10.133.1.4.5.1
A conceptual row that contains OMSn sink performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOMSnSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.5.1.1
optIfOMSnSinkPrevDayLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.2
optIfOMSnSinkPrevDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.3
optIfOMSnSinkPrevDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.4
optIfOMSnSinkPrevDayLastOutputPowerThe last optical power at the output
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.5
optIfOMSnSinkPrevDayLowOutputPowerThe lowest optical power at the output
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.6
optIfOMSnSinkPrevDayHighOutputPowerThe highest optical power at the output
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.5.1.7
.1.3.6.1.2.1.10.133.1.4.6 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSrcCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSrcCurrentTable'
A table of OMSn source performance monitoring information for
the current 15-minute interval.
optIfOMSnSrcCurrentEntry row .1.3.6.1.2.1.10.133.1.4.6.1
A conceptual row that contains OMSn source performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOMSnSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.6.1.1
optIfOMSnSrcCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.2
optIfOMSnSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.3
optIfOMSnSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.4
optIfOMSnSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOMSnSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.5
optIfOMSnSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.6
optIfOMSnSrcCurrentAggregatedInputPowerThe aggregated optical power at the input.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.7
optIfOMSnSrcCurrentLowAggregatedInputPowerThe lowest aggregated optical power at the input
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.8
optIfOMSnSrcCurrentHighAggregatedInputPowerThe highest aggregated optical power at the input
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.9
optIfOMSnSrcCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If
optIfOMSnSrcCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.10
optIfOMSnSrcCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If
optIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.6.1.11
.1.3.6.1.2.1.10.133.1.4.7 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSrcIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSrcIntervalTable'
A table of historical OMSn source performance monitoring
information.
optIfOMSnSrcIntervalEntry row .1.3.6.1.2.1.10.133.1.4.7.1
A conceptual row that contains OMSn source performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOMSnSrcIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.4.7.1.1
optIfOMSnSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.7.1.2
optIfOMSnSrcIntervalLastOutputPowerThe last optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.3
optIfOMSnSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.4
optIfOMSnSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.5
optIfOMSnSrcIntervalLastAggregatedInputPowerThe last aggregated optical power at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.6
optIfOMSnSrcIntervalLowAggregatedInputPowerThe lowest aggregated optical power at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.7
optIfOMSnSrcIntervalHighAggregatedInputPowerThe highest aggregated optical power at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.7.1.8
.1.3.6.1.2.1.10.133.1.4.8 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSrcCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSrcCurDayTable'
A table of OMSn source performance monitoring information for
the current 24-hour interval.
optIfOMSnSrcCurDayEntry row .1.3.6.1.2.1.10.133.1.4.8.1
A conceptual row that contains OMSn source performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOMSnSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.8.1.1
optIfOMSnSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.8.1.2
optIfOMSnSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.8.1.3
optIfOMSnSrcCurDayLowAggregatedInputPowerThe lowest aggregated optical power at the input
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.8.1.4
optIfOMSnSrcCurDayHighAggregatedInputPowerThe highest aggregated optical power at the input
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.8.1.5
.1.3.6.1.2.1.10.133.1.4.9 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOMSnSrcPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOMSnSrcPrevDayTable'
A table of OMSn source performance monitoring information for
the previous 24-hour interval.
optIfOMSnSrcPrevDayEntry row .1.3.6.1.2.1.10.133.1.4.9.1
A conceptual row that contains OMSn source performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOMSnSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.4.9.1.1
optIfOMSnSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.2
optIfOMSnSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.3
optIfOMSnSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.4
optIfOMSnSrcPrevDayLastAggregatedInputPowerThe last aggregated optical power at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.5
optIfOMSnSrcPrevDayLowAggregatedInputPowerThe lowest aggregated optical power at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.6
optIfOMSnSrcPrevDayHighAggregatedInputPowerThe highest aggregated optical power at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.4.9.1.7
.1.3.6.1.2.1.10.133.1.5.1 · 1 row entry · 1 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupConfigTable'
A table of OChGroup configuration information.
optIfOChGroupConfigEntry row .1.3.6.1.2.1.10.133.1.5.1.1
A conceptual row that contains OChGroup configuration
information of an interface.
Indexes
Column Syntax OID
optIfOChGroupDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.5.1.1.1
.1.3.6.1.2.1.10.133.1.5.2 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSinkCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSinkCurrentTable'
A table of OChGroup sink performance monitoring information for
the current 15-minute interval.
optIfOChGroupSinkCurrentEntry row .1.3.6.1.2.1.10.133.1.5.2.1
A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOChGroupSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.2.1.1
optIfOChGroupSinkCurrentAggregatedInputPowerThe aggregated optical power of all the DWDM input
channels in the OChGroup.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.2
optIfOChGroupSinkCurrentLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.3
optIfOChGroupSinkCurrentHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.4
optIfOChGroupSinkCurrentLowerInputPowerThresholdThe lower limit threshold on aggregated input power. If
optIfOChGroupSinkCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.5
optIfOChGroupSinkCurrentUpperInputPowerThresholdThe upper limit threshold on aggregated input power. If
optIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.6
optIfOChGroupSinkCurrentOutputPowerThe optical power monitored at the output
in the OChGroup.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.7
optIfOChGroupSinkCurrentLowOutputPowerThe lowest optical power monitored at the output
in the OChGroup during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.8
optIfOChGroupSinkCurrentHighOutputPowerThe highest optical power monitored at the output
in the OChGroup during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.9
optIfOChGroupSinkCurrentLowerOutputPowerThresholdThe lower limit threshold on the output power. If
optIfOChGroupSinkCurrentOutputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.10
optIfOChGroupSinkCurrentUpperOutputPowerThresholdThe upper limit threshold on the output power. If
optIfOChGroupSinkCurrentOutputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.2.1.11
.1.3.6.1.2.1.10.133.1.5.3 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSinkIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSinkIntervalTable'
A table of historical OChGroup sink performance monitoring
information.
optIfOChGroupSinkIntervalEntry row .1.3.6.1.2.1.10.133.1.5.3.1
A conceptual row that contains OChGroup sink performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOChGroupSinkIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.5.3.1.1
optIfOChGroupSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.3.1.2
optIfOChGroupSinkIntervalLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.3
optIfOChGroupSinkIntervalLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.4
optIfOChGroupSinkIntervalHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.5
optIfOChGroupSinkIntervalLastOutputPowerThe last optical power monitored at the output
in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.6
optIfOChGroupSinkIntervalLowOutputPowerThe lowest optical power monitored at the output
in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.7
optIfOChGroupSinkIntervalHighOutputPowerThe highest optical power monitored at the output
in the OChGroup during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.3.1.8
.1.3.6.1.2.1.10.133.1.5.4 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSinkCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSinkCurDayTable'
A table of OChGroup sink performance monitoring information for
the current 24-hour interval.
optIfOChGroupSinkCurDayEntry row .1.3.6.1.2.1.10.133.1.5.4.1
A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOChGroupSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.4.1.1
optIfOChGroupSinkCurDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.4.1.2
optIfOChGroupSinkCurDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels in the OChGroup during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.4.1.3
optIfOChGroupSinkCurDayLowOutputPowerThe lowest optical power monitored at the output
in the OChGroup during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.4.1.4
optIfOChGroupSinkCurDayHighOutputPowerThe highest optical power monitored at the output
in the OChGroup during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.4.1.5
.1.3.6.1.2.1.10.133.1.5.5 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSinkPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSinkPrevDayTable'
A table of OChGroup sink performance monitoring information for
the previous 24-hour interval.
optIfOChGroupSinkPrevDayEntry row .1.3.6.1.2.1.10.133.1.5.5.1
A conceptual row that contains OChGroup sink performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOChGroupSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.5.1.1
optIfOChGroupSinkPrevDayLastAggregatedInputPowerThe last aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.2
optIfOChGroupSinkPrevDayLowAggregatedInputPowerThe lowest aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.3
optIfOChGroupSinkPrevDayHighAggregatedInputPowerThe highest aggregated optical power of all the DWDM input
channels in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.4
optIfOChGroupSinkPrevDayLastOutputPowerThe last optical power monitored at the output
in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.5
optIfOChGroupSinkPrevDayLowOutputPowerThe lowest optical power monitored at the output
in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.6
optIfOChGroupSinkPrevDayHighOutputPowerThe highest optical power monitored at the output
in the OChGroup during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.5.1.7
.1.3.6.1.2.1.10.133.1.5.6 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSrcCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSrcCurrentTable'
A table of OChGroup source performance monitoring information for
the current 15-minute interval.
optIfOChGroupSrcCurrentEntry row .1.3.6.1.2.1.10.133.1.5.6.1
A conceptual row that contains OChGroup source performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOChGroupSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.6.1.1
optIfOChGroupSrcCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.2
optIfOChGroupSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.3
optIfOChGroupSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.4
optIfOChGroupSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOChGroupSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.5
optIfOChGroupSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.6
optIfOChGroupSrcCurrentAggregatedInputPowerThe aggregated optical power monitored at the input.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.7
optIfOChGroupSrcCurrentLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.8
optIfOChGroupSrcCurrentHighAggregatedInputPowerThe highest aggregated optical power monitored at the input
during the current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.9
optIfOChGroupSrcCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If
optIfOChGroupSrcCurrentAggregatedInputPower drops to this value
or below, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.10
optIfOChGroupSrcCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If
optIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
this value, a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.6.1.11
.1.3.6.1.2.1.10.133.1.5.7 · 1 row entry · 8 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSrcIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSrcIntervalTable'
A table of historical OChGroup source performance monitoring
information.
optIfOChGroupSrcIntervalEntry row .1.3.6.1.2.1.10.133.1.5.7.1
A conceptual row that contains OChGroup source performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOChGroupSrcIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.5.7.1.1
optIfOChGroupSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.7.1.2
optIfOChGroupSrcIntervalLastOutputPowerThe last optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.3
optIfOChGroupSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.4
optIfOChGroupSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.5
optIfOChGroupSrcIntervalLastAggregatedInputPowerThe last aggregated optical power monitored at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.6
optIfOChGroupSrcIntervalLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.7
optIfOChGroupSrcIntervalHighAggregatedInputPowerThe highest aggregated optical power monitored at the input
during the interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.7.1.8
.1.3.6.1.2.1.10.133.1.5.8 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSrcCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSrcCurDayTable'
A table of OChGroup source performance monitoring information for
the current 24-hour interval.
optIfOChGroupSrcCurDayEntry row .1.3.6.1.2.1.10.133.1.5.8.1
A conceptual row that contains OChGroup source performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOChGroupSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.8.1.1
optIfOChGroupSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.8.1.2
optIfOChGroupSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.8.1.3
optIfOChGroupSrcCurDayLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.8.1.4
optIfOChGroupSrcCurDayHighAggregatedInputPowerThe highest aggregated optical power monitored at the input
during the current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.8.1.5
.1.3.6.1.2.1.10.133.1.5.9 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChGroupSrcPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChGroupSrcPrevDayTable'
A table of OChGroup source performance monitoring information for
the previous 24-hour interval.
optIfOChGroupSrcPrevDayEntry row .1.3.6.1.2.1.10.133.1.5.9.1
A conceptual row that contains OChGroup source performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOChGroupSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.5.9.1.1
optIfOChGroupSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.2
optIfOChGroupSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.3
optIfOChGroupSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.4
optIfOChGroupSrcPrevDayLastAggregatedInputPowerThe last aggregated optical power monitored at the input
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.5
optIfOChGroupSrcPrevDayLowAggregatedInputPowerThe lowest aggregated optical power monitored at the input
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.6
optIfOChGroupSrcPrevDayHighAggregatedInputPowerThe highest aggregated optical power monitored at the input
during the previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.5.9.1.7
.1.3.6.1.2.1.10.133.1.6.1 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChConfigTable'
A table of OCh configuration information.
optIfOChConfigEntry row .1.3.6.1.2.1.10.133.1.6.1.1
A conceptual row that contains OCh configuration
information of an interface.
Indexes
Column Syntax OID
optIfOChDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.6.1.1.1
optIfOChCurrentStatusIndicates the defect condition of the entity, if any.
This object is applicable when optIfOChDirectionality
has the value sink(1) or bidirectional(3).
In full-capability systems the bit position los(1) is not used.
In r…
Bits
Enumerated Values:
0losP
1los
2oci
3ssfP
4ssfO
5ssf
.1.3.6.1.2.1.10.133.1.6.1.1.2
.1.3.6.1.2.1.10.133.1.6.2 · 1 row entry · 6 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSinkCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSinkCurrentTable'
A table of OCh sink performance monitoring information for
the current 15-minute interval.
optIfOChSinkCurrentEntry row .1.3.6.1.2.1.10.133.1.6.2.1
A conceptual row that contains OCh sink performance
monitoring information for an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOChSinkCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.2.1.1
optIfOChSinkCurrentInputPowerThe optical power monitored at the input.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.2.1.2
optIfOChSinkCurrentLowInputPowerThe lowest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.2.1.3
optIfOChSinkCurrentHighInputPowerThe highest optical power monitored at the input during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.2.1.4
optIfOChSinkCurrentLowerInputPowerThresholdThe lower limit threshold on input power. If
optIfOChSinkCurrentInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.2.1.5
optIfOChSinkCurrentUpperInputPowerThresholdThe upper limit threshold on input power. If
optIfOChSinkCurrentInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.2.1.6
.1.3.6.1.2.1.10.133.1.6.3 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSinkIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSinkIntervalTable'
A table of historical OCh sink performance monitoring
information.
optIfOChSinkIntervalEntry row .1.3.6.1.2.1.10.133.1.6.3.1
A conceptual row that contains OCh sink performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOChSinkIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.6.3.1.1
optIfOChSinkIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.3.1.2
optIfOChSinkIntervalLastInputPowerThe last optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.3.1.3
optIfOChSinkIntervalLowInputPowerThe lowest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.3.1.4
optIfOChSinkIntervalHighInputPowerThe highest optical power monitored at the input during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.3.1.5
.1.3.6.1.2.1.10.133.1.6.4 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSinkCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSinkCurDayTable'
A table of OCh sink performance monitoring information for
the current 24-hour interval.
optIfOChSinkCurDayEntry row .1.3.6.1.2.1.10.133.1.6.4.1
A conceptual row that contains OCh sink performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOChSinkCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.4.1.1
optIfOChSinkCurDayLowInputPowerThe lowest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.4.1.2
optIfOChSinkCurDayHighInputPowerThe highest optical power monitored at the input during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.4.1.3
.1.3.6.1.2.1.10.133.1.6.5 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSinkPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSinkPrevDayTable'
A table of OCh sink performance monitoring information for
the previous 24-hour interval.
optIfOChSinkPrevDayEntry row .1.3.6.1.2.1.10.133.1.6.5.1
A conceptual row that contains OCh sink performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOChSinkPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.5.1.1
optIfOChSinkPrevDayLastInputPowerThe last optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.5.1.2
optIfOChSinkPrevDayLowInputPowerThe lowest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.5.1.3
optIfOChSinkPrevDayHighInputPowerThe highest optical power monitored at the input during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.5.1.4
.1.3.6.1.2.1.10.133.1.6.6 · 1 row entry · 6 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSrcCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSrcCurrentTable'
A table of OCh source performance monitoring information for
the current 15-minute interval.
optIfOChSrcCurrentEntry row .1.3.6.1.2.1.10.133.1.6.6.1
A conceptual row that contains OCh source performance
monitoring information of an interface for the current
15-minute interval.
Indexes
Column Syntax OID
optIfOChSrcCurrentSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.6.1.1
optIfOChSrcCurrentOutputPowerThe optical power monitored at the output.0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.6.1.2
optIfOChSrcCurrentLowOutputPowerThe lowest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.6.1.3
optIfOChSrcCurrentHighOutputPowerThe highest optical power monitored at the output during the
current 15-minute interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.6.1.4
optIfOChSrcCurrentLowerOutputPowerThresholdThe lower limit threshold on output power. If
optIfOChSrcCurrentOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.6.1.5
optIfOChSrcCurrentUpperOutputPowerThresholdThe upper limit threshold on output power. If
optIfOChSrcCurrentOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
0.1 dbmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.6.1.6
.1.3.6.1.2.1.10.133.1.6.7 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSrcIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSrcIntervalTable'
A table of historical OCh source performance monitoring
information.
optIfOChSrcIntervalEntry row .1.3.6.1.2.1.10.133.1.6.7.1
A conceptual row that contains OCh source performance
monitoring information of an interface during a particular
historical interval.
Column Syntax OID
optIfOChSrcIntervalNumberUniquely identifies the interval.OptIfIntervalNumber
Type Constraints:
range: 1..96
.1.3.6.1.2.1.10.133.1.6.7.1.1
optIfOChSrcIntervalSuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.7.1.2
optIfOChSrcIntervalLastOutputPowerThe last optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.7.1.3
optIfOChSrcIntervalLowOutputPowerThe lowest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.7.1.4
optIfOChSrcIntervalHighOutputPowerThe highest optical power monitored at the output during the
interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.7.1.5
.1.3.6.1.2.1.10.133.1.6.8 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSrcCurDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSrcCurDayTable'
A table of OCh source performance monitoring information for
the current 24-hour interval.
optIfOChSrcCurDayEntry row .1.3.6.1.2.1.10.133.1.6.8.1
A conceptual row that contains OCh source performance
monitoring information of an interface for the current
24-hour interval.
Indexes
Column Syntax OID
optIfOChSrcCurDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.8.1.1
optIfOChSrcCurDayLowOutputPowerThe lowest optical power monitored at the output during the

current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.8.1.2
optIfOChSrcCurDayHighOutputPowerThe highest optical power monitored at the output during the
current 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.8.1.3
.1.3.6.1.2.1.10.133.1.6.9 · 1 row entry · 4 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOChSrcPrevDayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOChSrcPrevDayTable'
A table of OCh source performance monitoring information for
the previous 24-hour interval.
optIfOChSrcPrevDayEntry row .1.3.6.1.2.1.10.133.1.6.9.1
A conceptual row that contains OCh source performance
monitoring information of an interface for the previous
24-hour interval.
Indexes
Column Syntax OID
optIfOChSrcPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.6.9.1.1
optIfOChSrcPrevDayLastOutputPowerThe last optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.9.1.2
optIfOChSrcPrevDayLowOutputPowerThe lowest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.9.1.3
optIfOChSrcPrevDayHighOutputPowerThe highest optical power monitored at the output during the
previous 24-hour interval.
0.1 dbmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.2.1.10.133.1.6.9.1.4
.1.3.6.1.2.1.10.133.1.7.1 · 1 row entry · 14 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfOTUkConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfOTUkConfigTable'
A table of OTUk configuration information.
optIfOTUkConfigEntry row .1.3.6.1.2.1.10.133.1.7.1.1
A conceptual row that contains OTUk configuration
information of an interface.
Indexes
Column Syntax OID
optIfOTUkDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.7.1.1.1
optIfOTUkBitRateKIndicates the bit rate of the entity.OptIfBitRateK.1.3.6.1.2.1.10.133.1.7.1.1.2
optIfOTUkTraceIdentifierTransmittedThe trace identifier transmitted.
This object is applicable when optIfOTUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows where optIfOTUkDirectionality
has the value sink…
OptIfTxTIr/w
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.7.1.1.3
optIfOTUkDAPIExpectedThe DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIf…
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.7.1.1.4
optIfOTUkSAPIExpectedThe SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIf…
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.7.1.1.5
optIfOTUkTraceIdentifierAcceptedThe actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where op…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.7.1.1.6
optIfOTUkTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It m…
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.7.1.1.7
optIfOTUkTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirect…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.7.1.1.8
optIfOTUkDEGThrIndicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is

greater than or equa…
percentageOptIfDEGThrr/w
Type Constraints:
range: 1..100
.1.3.6.1.2.1.10.133.1.7.1.1.9
optIfOTUkDEGMIndicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfOTUkDEGM
consecutive bad PM Seconds are detected.
This object is only applicable to the sink function, i.e.,…
OptIfDEGMr/w
Type Constraints:
range: 2..10
.1.3.6.1.2.1.10.133.1.7.1.1.10
optIfOTUkSinkAdaptActiveIndicates whether the sink adaptation function is activated or
not.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.7.1.1.11
optIfOTUkSourceAdaptActiveIndicates whether the source adaptation function is activated or
not.
This object is only applicable to the source function, i.e.,
only when optIfOTUkDirectionality has the value source(2)
or bidirectional(3). It must …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.7.1.1.12
optIfOTUkSinkFECEnabledIf Forward Error Correction (FEC) is supported, this object
indicates whether FEC at the OTUk sink adaptation function is
enabled or not.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDir…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.7.1.1.13
optIfOTUkCurrentStatusIndicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when optIfOTUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated …
Bits
Enumerated Values:
0tim
1deg
2bdi
3ssf
4lof
5ais
6lom
.1.3.6.1.2.1.10.133.1.7.1.1.14
.1.3.6.1.2.1.10.133.1.7.2 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfGCC0ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfGCC0ConfigTable'
A table of GCC0 configuration information.
optIfGCC0ConfigEntry row .1.3.6.1.2.1.10.133.1.7.2.1
A conceptual row that contains GCC0 configuration
information of an interface. Each instance must
correspond to an instance of optIfOTUkConfigEntry.
Separate source and/or sink instances may exist
for a given ifIndex v…
Column Syntax OID
optIfGCC0DirectionalityIndicates the directionality of the entity.
The values source(2) and bidirectional(3) are
not allowed if the corresponding instance of
optIfOTUkDirectionality has the value sink(1).
The values sink(1) and bidirectional(…
OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.7.2.1.1
optIfGCC0ApplicationIndicates the application transported by the GCC0 entity.
Example applications are ECC, User data channel.

The value of this object may not be changed when
optIfGCC0RowStatus has the value active(1).
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.133.1.7.2.1.2
optIfGCC0RowStatusThis columnar object is used for creating and deleting a
conceptual row of the optIfGCC0 config table.
It is used to model the addGCC0Access and removeGCC0Access
operations of an OTUk_TTP for GCC0 access control as defi…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.10.133.1.7.2.1.3
.1.3.6.1.2.1.10.133.1.8.1 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkConfigTable'
A table of ODUk configuration information.
optIfODUkConfigEntry row .1.3.6.1.2.1.10.133.1.8.1.1
A conceptual row that contains ODUk configuration
information of an interface.
Indexes
Column Syntax OID
optIfODUkDirectionalityIndicates the directionality of the entity.OptIfDirectionality
Type Values:
1sink
2source
3bidirectional
.1.3.6.1.2.1.10.133.1.8.1.1.1
optIfODUkBitRateKIndicates the bit rate of the entity.OptIfBitRateK.1.3.6.1.2.1.10.133.1.8.1.1.2
optIfODUkTcmFieldsInUseIndicates the TCM field(s) that are currently in use.
The positions of the bits correspond to the TCM fields.
A bit that is set to 1 means that the corresponding TCM
field is used. This object will be updated when rows…
Bits
Enumerated Values:
0tcmField1
1tcmField2
2tcmField3
3tcmField4
4tcmField5
5tcmField6
.1.3.6.1.2.1.10.133.1.8.1.1.3
optIfODUkPositionSeqCurrentSizeThis variable indicates the current size of the position
sequence (i.e., number of TCM function and/or GCC12
access that have been created in the ODUk interface).
When the value of this variable is greater than zero,
it…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.10.133.1.8.1.1.4
optIfODUkTtpPresentThis object has the value true(1) if the ifEntry under which
it is instantiated contains an ODUk Trail Termination Point,
i.e., is the endpoint of an ODUk path. In that case there
will be a corresponding row in the ODU…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.8.1.1.5
.1.3.6.1.2.1.10.133.1.8.2 · 1 row entry · 9 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkTtpConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkTtpConfigTable'
A table of ODUk TTP configuration information.
optIfODUkTtpConfigEntry row .1.3.6.1.2.1.10.133.1.8.2.1
A conceptual row that contains ODUk TTP configuration
information of an interface.
Indexes
Column Syntax OID
optIfODUkTtpTraceIdentifierTransmittedThe trace identifier transmitted.
This object is applicable when optIfODUkDirectionality
has the value source(2) or bidirectional(3). It must not
be instantiated in rows where optIfODUkDirectionality
has the value sink…
OptIfTxTIr/w
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.8.2.1.1
optIfODUkTtpDAPIExpectedThe DAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIf…
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.8.2.1.2
optIfODUkTtpSAPIExpectedThe SAPI expected by the receiver.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where optIf…
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.8.2.1.3
optIfODUkTtpTraceIdentifierAcceptedThe actual trace identifier accepted.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated in rows
where op…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.8.2.1.4
optIfODUkTtpTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It m…
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.8.2.1.5
optIfODUkTtpTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirect…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.8.2.1.6
optIfODUkTtpDEGThrIndicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is
greater than or equal to optIfODUkD…
percentageOptIfDEGThrr/w
Type Constraints:
range: 1..100
.1.3.6.1.2.1.10.133.1.8.2.1.7
optIfODUkTtpDEGMIndicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkDEGM
consecutive bad PM Seconds are detected.
This object is only applicable to the sink function, i.e.,…
OptIfDEGMr/w
Type Constraints:
range: 2..10
.1.3.6.1.2.1.10.133.1.8.2.1.8
optIfODUkTtpCurrentStatusIndicates the defect condition of the entity, if any.
This object is only applicable to the sink function, i.e.,
only when optIfODUkDirectionality has the value sink(1)
or bidirectional(3). It must not be instantiated …
Bits
Enumerated Values:
0oci
1lck
2tim
3deg
4bdi
5ssf
.1.3.6.1.2.1.10.133.1.8.2.1.9
.1.3.6.1.2.1.10.133.1.8.3 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkPositionSeqTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkPositionSeqTable'
A table of ODUk Position Sequence information.
optIfODUkPositionSeqEntry row .1.3.6.1.2.1.10.133.1.8.3.1
A conceptual row that contains ODUk position sequence
information of an ODUk interface. The ODUk interface
is identified by the ifIndex. Associated with each
ODUk interface there may be one of more conceptual
rows in …
Column Syntax OID
optIfODUkPositionSeqIndexThis variable identifies a row in the
optIfODUkPositionSeqTable Table.
Each row of the optIfODUkPositionSeqTable Table
represents a TCM or GCC12 access function within the
associated ODUk interface.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.2.1.10.133.1.8.3.1.1
optIfODUkPositionSeqPositionThis variable indicates the position of the TCM or
GCC12 access function within the sequence of TCMs &
GCC12 access functions of the associated ODUk
interface. The TCM or GCC12 presented by this row is
referenced by th…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.10.133.1.8.3.1.2
optIfODUkPositionSeqPointerThis variable identifies the TCM or GCC12 access function
by pointing to the corresponding optIfODUkT or optIfGCC12
entity.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.2.1.10.133.1.8.3.1.3
.1.3.6.1.2.1.10.133.1.8.4 · 1 row entry · 10 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkNimConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkNimConfigTable'
A table of ODUkNim configuration information.
optIfODUkNimConfigEntry row .1.3.6.1.2.1.10.133.1.8.4.1
A conceptual row that contains ODUkNim configuration
information of an interface. Each instance must
correspond to an instance of optIfODUkConfigEntry
for which optIfODUkTtpPresent has the value false(2).

…
Column Syntax OID
optIfODUkNimDirectionalitySpecifies the monitor point for the ODUk Path non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of optIfODUkDirectionality
has the value sink(1), and the value sink(1) …
OptIfSinkOrSource
Type Values:
1sink
2source
.1.3.6.1.2.1.10.133.1.8.4.1.1
optIfODUkNimDAPIExpectedThe DAPI expected by the receiver.
This object has no effect if optIfODUkNimTIMDetMode has
the value off(1) or sapi(3).
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.8.4.1.2
optIfODUkNimSAPIExpectedThe SAPI expected by the receiver.
This object has no effect if optIfODUkNimTIMDetMode has
the value off(1) or dapi(2).
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.8.4.1.3
optIfODUkNimTraceIdentifierAcceptedThe actual trace identifier accepted. The value of
this object is unspecified if optIfODUkNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if optIfODUkNimRowStatus has any value other
than…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.8.4.1.4
optIfODUkNimTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.8.4.1.5
optIfODUkNimTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.8.4.1.6
optIfODUkNimDEGThrIndicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad
if the percentage of detected errored blocks in that second is
greater than or equal to optIfODUkN…
percentageOptIfDEGThrr/w
Type Constraints:
range: 1..100
.1.3.6.1.2.1.10.133.1.8.4.1.7
optIfODUkNimDEGMIndicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkNimDEGM
consecutive bad PM Seconds are detected.
OptIfDEGMr/w
Type Constraints:
range: 2..10
.1.3.6.1.2.1.10.133.1.8.4.1.8
optIfODUkNimCurrentStatusIndicates the defect condition of the entity, if
any. The value of this object is unspecified if
optIfODUkNimRowStatus has any value other than

active(1).
Bits
Enumerated Values:
0oci
1lck
2tim
3deg
4bdi
5ssf
.1.3.6.1.2.1.10.133.1.8.4.1.9
optIfODUkNimRowStatusThis columnar object is used for creating and deleting
a conceptual row of the optIfODUkNim config table.
It is used to model the activateNim and deactivateNim
operations of an OTUk_CTP for non-intrusive monitoring
cont…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.10.133.1.8.4.1.10
.1.3.6.1.2.1.10.133.1.8.5 · 1 row entry · 5 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfGCC12ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfGCC12ConfigTable'
A table of GCC12 configuration information.
The GCC function processes the GCC overhead bytes passing
through them but leave the remainder of the ODUk overhead
and payload data alone.
optIfGCC12ConfigEntry row .1.3.6.1.2.1.10.133.1.8.5.1
A conceptual row that contains GCC12 configuration
information of an interface. Each instance must
correspond to an instance of optIfODUkConfigEntry.
Separate instances providing GCC1-only access and
GCC2-only access m…
Column Syntax OID
optIfGCC12CodirectionalIndicates the directionality of the GCC12 termination with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the GCC12 extracts COMMS data from the
signal at the input to the ODUk CTP si…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.8.5.1.1
optIfGCC12GCCAccessIndicates the GCC access represented by the entity.Enumeration
Enumerated Values:
1gcc1
2gcc2
3gcc1and2
.1.3.6.1.2.1.10.133.1.8.5.1.2
optIfGCC12GCCPassThroughControls whether the selected GCC overhead bytes are passed

through or modified. The value true(1) means that the selected
GCC overhead bytes are passed through unmodified from the ODUk
CTP input to the …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.8.5.1.3
optIfGCC12ApplicationIndicates the application transported by the GCC12 entity.
Example applications are ECC, User data channel.

The value of this object may not be changed when
optIfGCC12RowStatus has the value active(1).
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.2.1.10.133.1.8.5.1.4
optIfGCC12RowStatusThis columnar object is used for creating and deleting
a conceptual row of the optIfGCC12 config table. It is
used to model the addGCC12Access and removeGCC12Access
operations of an ODUk_CTP or ODUk_TTP for GCC12 acces…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.10.133.1.8.5.1.5
.1.3.6.1.2.1.10.133.1.9.1 · 1 row entry · 15 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkTConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkTConfigTable'
A table of ODUkT configuration information.
optIfODUkTConfigEntry row .1.3.6.1.2.1.10.133.1.9.1.1
A conceptual row that contains ODUkT configuration
information of an interface. Each instance must
correspond to an instance of optIfODUkConfigEntry.
Rows in this table are mutually exclusive with rows
in the ODUkT NIM…
Column Syntax OID
optIfODUkTTcmFieldIndicates the tandem connection monitoring
field of the ODUk OH. Valid values are
integers from 1 to 6.
Unsigned32
Constraints:
range: 1-6
.1.3.6.1.2.1.10.133.1.9.1.1.1
optIfODUkTCodirectionalIndicates the directionality of the ODUkT termination point with
respect to the associated ODUk CTP. The value true(1) means
that the sink part of the ODUkT TP extracts TCM data from the
signal at the input to the ODUk…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.9.1.1.2
optIfODUkTTraceIdentifierTransmittedThe trace identifier transmitted.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDirectionality has the value sink(1) and
…
OptIfTxTIr/w
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.9.1.1.3
optIfODUkTDAPIExpectedThe DAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDirectionality has the value sink(1) and
…
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.9.1.1.4
optIfODUkTSAPIExpectedThe SAPI expected by the receiver.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDirectionality has the value sink(1) and
…
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.9.1.1.5
optIfODUkTTraceIdentifierAcceptedThe actual trace identifier accepted.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkDirectionality has the value sink(1) an…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.9.1.1.6
optIfODUkTTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODU…
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.9.1.1.7
optIfODUkTTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
This object is applicable only to the following three cases.
(i) optIfODUkDirectionality has the value bidirectional(3), or
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.9.1.1.8
optIfODUkTDEGThrIndicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is

greater than or equa…
percentageOptIfDEGThrr/w
Type Constraints:
range: 1..100
.1.3.6.1.2.1.10.133.1.9.1.1.9
optIfODUkTDEGMIndicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkTDEGM
consecutive bad PM Seconds are detected.
This object is applicable only to the following three cas…
OptIfDEGMr/w
Type Constraints:
range: 2..10
.1.3.6.1.2.1.10.133.1.9.1.1.10
optIfODUkTSinkModeThis variable specifies the TCM mode at the entity.
The value operational(1) means that TCM Overhead (TCMOH)
processes (see ITU-T G.798) shall be
performed and consequent actions for AIS, Trail
Signal Fail (TSF), Trail …
Enumerationr/w
Enumerated Values:
1operational
2monitor
.1.3.6.1.2.1.10.133.1.9.1.1.11
optIfODUkTSinkLockSignalAdminStateProvides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the ODUKT sink. When
a Tandem Connection endpoint is set to admin state locked,
it inserts the ODUk-LCK signal in t…
Enumerationr/w
Enumerated Values:
1locked
2normal
.1.3.6.1.2.1.10.133.1.9.1.1.12
optIfODUkTSourceLockSignalAdminStateProvides the capability to provision the LOCK signal, which
is one of the ODUk maintenance signals, at the source.
When a Tandem Connection endpoint is set to admin state
locked, it inserts the ODUk-LCK signal in the so…
Enumerationr/w
Enumerated Values:
1locked
2normal
.1.3.6.1.2.1.10.133.1.9.1.1.13
optIfODUkTCurrentStatusIndicates the defect condition of the entity, if any.
This object is applicable only when either one of the
following three cases holds:
(i) optIfODUkDirectionality has the value bidirectional(3), or
(ii) optIfODUkD…
Bits
Enumerated Values:
0oci
1lck
2tim
3deg
4bdi
5ssf
.1.3.6.1.2.1.10.133.1.9.1.1.14
optIfODUkTRowStatusThis columnar object is used for creating and deleting a
conceptual row of the optIfODUkT config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP or ODUk_TTP for Tandem connection monitoring…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.10.133.1.9.1.1.15
.1.3.6.1.2.1.10.133.1.9.2 · 1 row entry · 11 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk optIfODUkTNimConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OPT-IF-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OPT-IF-MIB::optIfODUkTNimConfigTable'
A table of ODUkTNim configuration information.
optIfODUkTNimConfigEntry row .1.3.6.1.2.1.10.133.1.9.2.1
A conceptual row that contains ODUkTNim configuration
information of an interface. Each instance must
correspond to an instance of optIfODUkConfigEntry.
Rows in this table are mutually exclusive with rows
in the ODUkT …
Column Syntax OID
optIfODUkTNimTcmFieldIndicates the tandem connection monitoring
field of the ODUk OH on which non-intrusive monitoring
is performed. Valid values are
integers from 1 to 6.
Unsigned32
Constraints:
range: 1-6
.1.3.6.1.2.1.10.133.1.9.2.1.1
optIfODUkTNimDirectionalitySpecifies the monitor point for the ODUk TCM non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of optIfODUkDirectionality
has the value sink(1), and the value sink(1) i…
OptIfSinkOrSource
Type Values:
1sink
2source
.1.3.6.1.2.1.10.133.1.9.2.1.2
optIfODUkTNimDAPIExpectedThe DAPI expected by the receiver.
This object has no effect if optIfODUkTNimTIMDetMode has
the value off(1) or sapi(3).
OptIfExDAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.9.2.1.3
optIfODUkTNimSAPIExpectedThe SAPI expected by the receiver.
This object has no effect if optIfODUkTNimTIMDetMode has
the value off(1) or dapi(2).
OptIfExSAPIr/w
Type Constraints:
range: 16
.1.3.6.1.2.1.10.133.1.9.2.1.4
optIfODUkTNimTraceIdentifierAcceptedThe actual trace identifier accepted. The value of
this object is unspecified if optIfODUkTNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if optIfODUkTNimRowStatus has any value other
th…
OptIfAcTI
Type Constraints:
range: 64
.1.3.6.1.2.1.10.133.1.9.2.1.5
optIfODUkTNimTIMDetModeIndicates the mode of the Trace Identifier Mismatch (TIM)
Detection function.
OptIfTIMDetModer/w
Type Values:
1off
2dapi
3sapi
4both
.1.3.6.1.2.1.10.133.1.9.2.1.6
optIfODUkTNimTIMActEnabledIndicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.10.133.1.9.2.1.7
optIfODUkTNimDEGThrIndicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad if
the percentage of detected errored blocks in that second is
greater than or equal to optIfODUkT…
percentageOptIfDEGThrr/w
Type Constraints:
range: 1..100
.1.3.6.1.2.1.10.133.1.9.2.1.8
optIfODUkTNimDEGMIndicates the threshold level for declaring a Degraded Signal
defect (dDEG). A dDEG shall be declared if optIfODUkTNimDEGM
consecutive bad PM Seconds are detected.
OptIfDEGMr/w
Type Constraints:
range: 2..10
.1.3.6.1.2.1.10.133.1.9.2.1.9
optIfODUkTNimCurrentStatusIndicates the defect condition of the entity, if any.
The value of this object is unspecified if
optIfODUkTNimRowStatus has any value other than
active(1).
Bits
Enumerated Values:
0oci
1lck
2tim
3deg
4bdi
5ssf
.1.3.6.1.2.1.10.133.1.9.2.1.10
optIfODUkTNimRowStatusThis columnar object is used for creating and deleting a
conceptual row of the optIfODUkTNim config table.
It is used to model the addTCM and removeTCM operations of an
ODUk_CTP or ODUk_TTP for non-intrusive Tandem conn…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.2.1.10.133.1.9.2.1.11