ONEACCESS-NAT-MIB

        Contact updated
    
Source file
ONEACCESS-NAT-MIB
Last revised
Identity
oacNatMIBModule
Base OID
1.3.6.1.4.1.13191.1.100.668
Imported Objects
IF-MIB ifIndex
ONEACCESS-GLOBAL-REG oacExpIMIpNatNotifications oacExpIMIpNatStatistics oacMIBModules
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TimeInterval
Net-SNMP examples using the oneaccess MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ONEACCESS-NAT-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ONEACCESS-NAT-MIB::oacNatMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ONEACCESS-NAT-MIB' -M '/opt/observium/mibs/oneaccess:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ONEACCESS-NAT-MIB::oacNatMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
.1.3.6.1.4.1.13191.1.100.668
.1.3.6.1.4.1.13191.10.3.1.1.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.3
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.4
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.5
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.6
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.7
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.8
.1.3.6.1.4.1.13191.10.3.1.1.1.1.1.9
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.10
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.11
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.12
Integer32
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.3
Integer32
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.4
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.5
Integer32
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.6
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.7
Integer32
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.8
.1.3.6.1.4.1.13191.10.3.1.1.1.1.2.1.9
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3.1.3
.1.3.6.1.4.1.13191.10.3.1.1.1.1.3.1.4
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4.1.1
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4.1.3
.1.3.6.1.4.1.13191.10.3.1.1.1.1.4.1.4
.1.3.6.1.4.1.13191.10.3.1.1.1.2
.1.3.6.1.4.1.13191.10.3.1.1.1.3
.1.3.6.1.4.1.13191.10.3.1.1.1.3.1
.1.3.6.1.4.1.13191.10.3.1.1.1.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. ONEACCESS-GLOBAL-REGoneaccess
  8. ONEACCESS-NAT-MIBoneaccessselected
Compliance Statements (1)

OID .1.3.6.1.4.1.13191.10.3.1.1.1.3.2.1
The compliance statement for agents that support the
ONEACCESS-NAT-MIB.
Required groups
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.13191.10.3.1.1.2.1
An NAT Notification maximum session reached signifies that
the number of ACL sessions has reached its configured limit
.1.3.6.1.4.1.13191.10.3.1.1.2.2
An NAT Notification warning session reaching limit signifies that
the number of ACL sessions is near from its maximum configured
limit