OMNITRON-PTP-MIB Table View

This table supports the port PTP configurations. Rows in this table are
automatically created, one for each port in the module. For GM4 only.

ostPtpPortCfgEntry row .1.3.6.1.4.1.7342.14.2.1

This is a PTP port configuration table entry.

Indexes

ostPtpPortCfgIndex

Column	Syntax	OID
ostPtpPortCfgIndex An index that is used to identify a specific PTP port user.	OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999	.1.3.6.1.4.1.7342.14.2.1.1
ostPtpPortCfgMode The PTP port mode. notConfigured(1) Port does not participate in PTP sourcePort(2) Source port of PTP PDUs egressPort(3) Egress port for PTP PDUs Ports defind as either…	Enumerationr/w Enumerated Values: 1 notConfigured 2 sourcePort 3 egressPort	.1.3.6.1.4.1.7342.14.2.1.2

This table supports the instance PTP configurations for the XM5.
          
Each row in this table indicates a different PTP instance. Each row is
created manually via the SNMP manager.

ostPtpInstanceCfgEntry row .1.3.6.1.4.1.7342.14.3.1

This is a PTP instance configuration table entry.

Indexes

ostPtpInstanceCfgIndex

Column	Syntax	OID
ostPtpInstanceCfgIndex An index that is used to identify a specific PTP instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.14.3.1.1
ostPtpInstanceCfgRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.14.3.1.2
ostPtpInstanceCfgEnable This object specifies whether the PTP instance is enabled. The value 'true' indicates that the instance is enabled. The value 'false' indicates that the instance is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.14.3.1.3
ostPtpInstanceCfgEvc This object defines which EVC that the PTP PDUs are transported on. Only valid EVC names can be written to this object.	OMNITRON-TC-MIBOstEvcNameStringOrNoner/w Type Constraints: range: 0..45	.1.3.6.1.4.1.7342.14.3.1.4
ostPtpInstanceCfgPortNumber The list of ports that are associated with the PTP instance. At least one port must be selected. Management Ports are not included.	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.14.3.1.5
ostPtpInstanceCfgTransport This object selects the specific type of PTP transport protocol for the specific PTP instance. l2Ethernet(1) Transport is Layer 2 only ipMulticast(2) Transport is Layer 3 with IP multicast address ipUnic…	Enumerationr/w Enumerated Values: 1 l2Ethernet 2 ipMulticast 3 ipUnicast	.1.3.6.1.4.1.7342.14.3.1.6
ostPtpInstanceCfgClockMode This object selects the PTP clock mode for the specific PTP instance. transparent(1) PTP transparent clock mode master(2) PTP master clock slave(3) PTP slave clock boundary(4) PTP bo…	Enumerationr/w Enumerated Values: 1 transparent 2 master 3 slave 4 boundary	.1.3.6.1.4.1.7342.14.3.1.7
ostPtpInstanceCfgClockType This object selects the PTP clock type for the specific PTP instance. typ1Step(1) One step clock type typ2Step(2) Two step clock type	Enumerationr/w Enumerated Values: 1 typ1Step 2 typ2Step	.1.3.6.1.4.1.7342.14.3.1.8
ostPtpInstanceCfgServerIp1 The clock source Server IP 1 address for the specific PTP instance. This object only needs to be defined for IP based transport instances.	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.14.3.1.9
ostPtpInstanceCfgServerIp2 The clock source Server IP 2 address for the specific PTP instance. This object only needs to be defined for IP based transport instances.	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.14.3.1.10
ostPtpInstanceCfgSourceIp The PTP source IP address for the specific PTP instance. This object only needs to be defined for IP based transport instances.	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.14.3.1.11
ostPtpInstanceCfgDomain The PTP clock domain for the specific PTP instance.	Unsigned32r/w Constraints: range: 0-128	.1.3.6.1.4.1.7342.14.3.1.12
ostPtpInstanceCfgPriority The PTP clock domain priority 1 for the specific PTP instance.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7342.14.3.1.13
ostPtpInstanceCfgCtagVid The C-TAG VID associated with this EVC on this interface. For a NNI port it indicates the PTP frame is double tagged, with the inner tag the value of the object. For a UNI port is indicates a different C-TAG VID from th…	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.14.3.1.14
ostPtpInstanceCfgOffset This object specifies the clock offset to the automatically calculated offset for this specific PTP instance. The clock offset is in nanoseconds and ranges from 0 to +32768. Negative values are not valid.	nanosecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.14.3.1.15
ostPtpInstanceCfgStatus This object indicates the status of the PTP instance.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.7342.14.3.1.16
ostPtpInstanceCfgTxSourcePort This object indicates the PTP transmission source port when operating as a master or boundary clock instance. A value of '0' indicates there is no specific PTP transmission port or the transmission port i…	OMNITRON-TC-MIBOstPortNumberr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.7342.14.3.1.17
ostPtpInstanceCfgPriority2 This object indicates the PTP clock domain priority 2 for the specific PTP instance.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7342.14.3.1.18
ostPtpInstanceCfgSubnetMask This object indicates the PTP IPv4 subnet mask for the specific PTP instance.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.14.3.1.19
ostPtpInstanceCfgAnnounceRate This object specifies the PTP announce rate, where rate is equal to one message every 2^[AnnounceRate] seconds. The default value is 1 message per 2^1 seconds or 1 message/2 seconds	Integer32r/w Constraints: range: -3-4	.1.3.6.1.4.1.7342.14.3.1.20
ostPtpInstanceCfgAnnounceTimeout This object specifies the PTP announce timeout, where the timeout is equal to 2^[AnnounceTimeout] seconds. The default value is a timout after per 2^3 secs, or 1 timeout/8 seconds	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.7342.14.3.1.21
ostPtpInstanceCfgSyncRate This object specifies the PTP sync message announce rate, where rate is equal to one message every 2^[SyncRate] seconds. The default value is 1 message per 2^0 secs, or 1 messasge/second	Integer32r/w Constraints: range: -7-4	.1.3.6.1.4.1.7342.14.3.1.22
ostPtpInstanceCfgDelayRequestRate This object specifies the PTP delay request message rate, where rate is equal to one message every 2^[DelayRequestRate] seconds. The default value is 1 message per 2^0 secs, or 1 message/second	Integer32r/w Constraints: range: -7-4	.1.3.6.1.4.1.7342.14.3.1.23

This table supports the PTP port instance status for the XM5.
          
Each row in this table is created autmotically when an instance is
created and ports are assigned to the instance. Rows in this table
are automatically deleted if the associated PTP instance is deleted.

ostPtpPortInstanceStatusEntry row .1.3.6.1.4.1.7342.14.4.1

This is a PTP port instance status table entry.

Indexes

ostPtpInstanceCfgIndex ostPtpPortInstanceStatusIndex

Column	Syntax	OID
ostPtpPortInstanceStatusIndex An index that is used to identify a specific PTP port number in an instance.	OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999	.1.3.6.1.4.1.7342.14.4.1.1
ostPtpPortInstanceStatusValue This object indicates the status of a port for the PTP instance.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.7342.14.4.1.2

This table supports the Clock I/O instance configurations for the XM5.
          
Each row in this table indicates a different Clock I/O instance. Each
row is created automatically by the SNMP Agent.

ostClockIoInstanceCfgEntry row .1.3.6.1.4.1.7342.14.5.1

This is a Clock I/O instance configuration table entry.

Indexes

ostClockIoInstanceCfgIndex

Column	Syntax	OID
ostClockIoInstanceCfgIndex An index that is used to identify a specific Clock I/O instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.14.5.1.1
ostClockIoInstanceCfgEnable This object specifies whether the Clock I/O instance is enabled. The value 'true' indicates that the instance is enabled. The value 'false' indicates that the instance is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.14.5.1.2
ostClockIoInstanceCfgDirection This object selects the Clock I/O instance direction type. notAvailable(0) Direction is not supported input(1) Clock is an input output(2) Clock is an ouput	Enumerationr/w Enumerated Values: 0 notAvailable 1 input 2 output	.1.3.6.1.4.1.7342.14.5.1.3
ostClockIoInstanceCfgRate This object selects the Clock I/O instance rate. notAvailable(0) Rate selection is not supported rate1pps(1) Clock rate is 1 pulse per second (PPS) rate10mhz(2) Clock rate is 10 MHz	Enumerationr/w Enumerated Values: 0 notAvailable 1 rate1pps 2 rate10mhz	.1.3.6.1.4.1.7342.14.5.1.4
ostClockIoInstanceCfgTerm This object selects the Clock I/O instance rate. notAvailable(0) Rate selection is not supported on(1) I/O is terminated off(2) I/O is terminated	Enumerationr/w Enumerated Values: 0 notAvailable 1 on 2 off	.1.3.6.1.4.1.7342.14.5.1.5
ostClockIoInstanceStatus This object indicates the Clock I/O instance status notAvailable(0) Clock I/O status is not available output(1) Clock I/O set to output input(2) Clock I/O set to input, i…	Enumeration Enumerated Values: 0 notAvailable 1 output 2 input 3 inputValid 4 inputAcquiring 5 inputLocked 6 inputLockedHoldover 7 inputHoldover 8 inputFreerun 9 inputNotLocked	.1.3.6.1.4.1.7342.14.5.1.6