OMNITRON-LAG-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
ostLinkAggrPortCfgTable
table
.1.3.6.1.4.1.7342.18.2
·
1 row entry
·
10 columns
Uses the omnitron variant from
Command help
/opt/observium/mibs/omnitron.
Walk ostLinkAggrPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-LAG-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-LAG-MIB::ostLinkAggrPortCfgTable'
This table supports the Link Aggregation port configuration table.
This is a Link Aggregation port configuration table entry. Each row
in the table indicates a specific configuration for a port in
relationship to the Link Aggregation function. These are
extensions to the standard IEEE …
in the table indicates a specific configuration for a port in
relationship to the Link Aggregation function. These are
extensions to the standard IEEE …
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Chassis, module and port indices to which this interface belongs.
|
OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999 |
.1.3.6.1.4.1.7342.18.2.1.1 |
||||
|
This object selects whether the specific port participates in link
aggregation. A value of true indicates the port can be aggregated and particpate in the link aggregation algorithm A value… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.7342.18.2.1.2 |
||||
|
This object selects whether the specific port participates in link
aggregation control protocol (LACP). A value of true indicates the port can peer via LACP. A value of false indicates the … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.7342.18.2.1.3 |
||||
|
This object selects whether the specific port's key value can be
automatically changed based the dynamic allocation of operational keys found in IEEE 802.1AX section 5.6.2. A value of true indicates the p… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.7342.18.2.1.4 |
||||
|
This object selects number of active ports in a link aggregation
group as indicated by the associated port number. If the number of active ports in a link aggregation group is equal or greater than the nu… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.18.2.1.5 |
||||
|
Writing any value to this object clears the counter values of the
associated port in the standard LAG MIB dot3adAggPortStatsTable. |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.18.2.1.6 |
||||
|
This object selects the logical group for a port number when a LAG
is assigned to a logical group instead of a physical port. This is used for a MEP assigned to a logical port instead of a physical port. … |
Unsigned32r/w Constraints: range: 0-0range: 81-88 |
.1.3.6.1.4.1.7342.18.2.1.7 |
||||
|
This object specifies the Maintenance Domain index for the MEP
that is configured on a port. If not configured (index value=0) fail over is by link or protocol failure only. This object can only be writte… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.18.2.1.8 |
||||
|
This object specifies the Maintenance Association index for the MEP
that is configured on a port. If not configured (index value=0) fail over is by link or protocol failure only. This object can only be … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7342.18.2.1.9 |
||||
|
This object specifies the Maintenance End Point Identifier (MEP).
If not configured (index value=0) fail over is by link failure only. Normally LAG failover is based upon link or protocol failure. If a M… |
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.7342.18.2.1.10 |
