OMNITRON-G8031-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
70

ostElpsInstanceCfgTable

table
.1.3.6.1.4.1.7342.10.1.3.2 · 1 row entry · 27 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostElpsInstanceCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-G8031-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-G8031-MIB::ostElpsInstanceCfgTable' 
This table supports ELPS instance configurations.
ostElpsInstanceCfgEntry row .1.3.6.1.4.1.7342.10.1.3.2.1
This is a ELPS instance configuration table entry.
Indexes
Column Syntax OID
ostElpsInstanceCfgIndex
An index to the ELPS Instance Configuration table which indicates
the specific ELPS instance for the module.

ostElpsGlobalCfgNextIndex needs to be inspected to find an
available index for row-creation.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.7342.10.1.3.2.1.1
ostElpsInstanceCfgRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7342.10.1.3.2.1.2
ostElpsInstanceCfgProfileEnable
This object specifies whether the ELPS profile is enabled for
the ELPS instance.

The value 'true' indicates the ELPS profile instance is enabled.

The value 'false' indicates the ELPS profil…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.2.1.3
ostElpsInstanceCfgHoldOffEnable
This object specifies whether the ELPS holdoff function is
enabled for the ELPS instance.

The value 'true' indicates the ELPS holdoff instance function is
enabled.

The value 'false' indicat…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.2.1.4
ostElpsInstanceCfgWaitToRestoreEnable
This object specifies whether the ELPS wait to restore function is
enabled for the ELPS instance.

The value 'true' indicates the ELPS wait to restore instance function
is enabled.

The value…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.2.1.5
ostElpsInstanceCfgProtectionName
ELPS instance profile name.

This object may not be modified after creation.
OMNITRON-TC-MIBOstProfileNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.3.2.1.6
ostElpsInstanceCfgProtectionPortNumber
This object selects the protection port number for the specific ELPS
instance that is configured.

This object can only be written at row creation time and cannot be
modified once it has been created.
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.3.2.1.7
ostElpsInstanceCfgWorkingPortNumber
This object selects the working port number for the specific ELPS
instance that is configured.

This object can only be written at row creation time and cannot be
modified once it has been created.
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.3.2.1.8
ostElpsInstanceCfgHoldOffTime
This object specifies the hold-off time in 0.1 seconds.

A value of 0 indicates there is no hold-off time.

This object can be written/modified after row creation time.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7342.10.1.3.2.1.9
ostElpsInstanceCfgWaitToRestoreTime
This object specifies the wait to restore time in minutes.

This object can be written/modified after row creation time.
Unsigned32r/w
Constraints:
range: 1-12
 .1.3.6.1.4.1.7342.10.1.3.2.1.10
ostElpsInstanceCfgApsRate
This object specifies the time between APS frames in seconds.

This object is only used when the APS frame transmission is enabled.

This object can be written/modified after row creation tim…
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7342.10.1.3.2.1.11
ostElpsInstanceCfgApsToSend
This object specifies the number of APS frames to send that are
separated by a minimum delay when a protection switch occurs.

This object is only used when the APS frame transmission is enabled.
…
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7342.10.1.3.2.1.12
ostElpsInstanceCfgScopeType
This object selects the specific scope type of the ELPS instance.

port(1) ELPS instance is port based
evc(2) ELPS instance is EVC based
mep(3) ELPS instance is MEP based
…
Enumerationr/w
Enumerated Values:
1port
2evc
3mep
 .1.3.6.1.4.1.7342.10.1.3.2.1.13
ostElpsInstanceCfgEvc
This object defines which EVC the ELPS instance is associated with.
It must be configured if ostElpsInstanceCfgScopeType is 'evc', 'mep'.
It is ignored for other instance types.

This object can only be wr…
OMNITRON-TC-MIBOstEvcNameStringOrNoner/w
Type Constraints:
range: 0..45
 .1.3.6.1.4.1.7342.10.1.3.2.1.14
ostElpsInstanceCfgVid
This object defines which specific VID the ELPS instance is associated
with. It is deprecated and should not be used.

This object can only be written at row creation time and cannot be
modified once it ha…
OMNITRON-TC-MIBOstVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.10.1.3.2.1.15
ostElpsInstanceCfgPriority
This object specifies the ELPS instance PCP value (tag priority) on
the generated APS PDU.

This object can only be written at row creation time and cannot be
modified once it has been created.
IEEE8021-TC-MIBIEEE8021PriorityValuer/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7342.10.1.3.2.1.16
ostElpsInstanceCfgWorkingMdIndex
This object specifies the Working MEP ELPS instance maintenance
domain index.

The value is ignored for ostElpsInstanceCfgScopeType 'port' or 'evc'.

It is mandatory to be configured with a v…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.2.1.17
ostElpsInstanceCfgWorkingMaIndex
This object specifies the Working MEP ELPS instance maintenance
association index.

It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeType is 'mep'.

The value is …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.2.1.18
ostElpsInstanceCfgWorkingMepId
This object specifies the Working MEP ELPS instance Maintenance End
Point Identifier.

It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeType is 'mep'.

The value …
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.7342.10.1.3.2.1.19
ostElpsInstanceCfgProtectionMdIndex
This object specifies the Protection MEP ELPS instance maintenance
domain index.

The value is ignored for ostElpsInstanceCfgScopeType 'port' or 'evc'.

It is mandatory to be configured with …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.2.1.20
ostElpsInstanceCfgProtectionMaIndex
This object specifies the Protection MEP ELPS instance maintenance
association index.

It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeType is 'mep'.

The value …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.2.1.21
ostElpsInstanceCfgProtectionMepId
This object specifies the Protection MEP ELPS instance Maintenance End
Point Identifier.

It is mandatory to be configured with a valid value if
ostElpsInstanceCfgScopeType is 'mep'.

The val…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.7342.10.1.3.2.1.22
ostElpsInstanceCfgProtectionType
This object selects the protection type of the ELPS instance.

This object can only be written at row creation time and cannot be
modified once it has been created.
OMNITRON-TC-MIBOstElpsProtectTyper/w
Type Values:
1e1plus1UniNoAps
2e1plus1UniAps
3e1plus1BiAps
4e1to1
5notAvailable
 .1.3.6.1.4.1.7342.10.1.3.2.1.23
ostElpsInstanceCfgRevertive
This object specifies whether the ELPS instance is revertive or
non-revertive. Revertive indicates whether the working link becomes
active after it is restored.

The value 'true' indicates the ELPS instanc…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.2.1.24
ostElpsInstanceCfgManualMode
This object selects the protection instance manual mode. When written the
indicated manual mode is selected.

nocommand(0) no command is indicated, read-only value only, write of
this valu…
Enumerationr/w
Enumerated Values:
0nocommand
1lockout
2freeze
3clearfreeze
4force
5protect
6working
7exercise
8clear
 .1.3.6.1.4.1.7342.10.1.3.2.1.25
ostElpsInstanceCfgClearStatistics
This object when written clears the statistic counters associated with
a specific protection instance. When read the value always returns
'false'.

Writing this value does not change any items in the confi…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.2.1.26
ostElpsInstanceCfgEvcProtected
This object defines which EVC the protected ELPS port is
associated with. If uninitialized (null length string) or is the same
value as ostElpsInstanceCfgEvc then this object indicates that the
protected EVC and the wor…
OMNITRON-TC-MIBOstEvcNameStringOrNoner/w
Type Constraints:
range: 0..45
 .1.3.6.1.4.1.7342.10.1.3.2.1.27

ostElpsInstanceStatusTable

table
.1.3.6.1.4.1.7342.10.1.3.3 · 1 row entry · 16 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostElpsInstanceStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-G8031-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-G8031-MIB::ostElpsInstanceStatusTable' 
This table supports ELPS instance status.
ostElpsInstanceStatusEntry row .1.3.6.1.4.1.7342.10.1.3.3.1
This is a ELPS instance status table entry.
Indexes
Column Syntax OID
ostElpsInstanceStatusIndex
An index to the ELPS Instance status table which indicates
the specific ELPS instance for the module.

Rows are automatically created when a row in the
ostElpsInstanceCfgTable is created.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.7342.10.1.3.3.1.1
ostElpsInstanceStatusWorkingPort
This object indicates whether the current instance working port is
operational.

The value 'true' indicates the current instance working port's status
is operational.

The value 'false' indic…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.3.1.2
ostElpsInstanceStatusProtectionPort
This object indicates whether the current instance protection port is
operational.

The value 'true' indicates the current instance protection port is
operational.

The value 'false' indicate…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.3.1.3
ostElpsInstanceStatusLocalType
This object indicates the status of the local protection type. It is
generally the same as the configured value, but may change based upon
configuration/status changes.
OMNITRON-TC-MIBOstElpsProtectType
Type Values:
1e1plus1UniNoAps
2e1plus1UniAps
3e1plus1BiAps
4e1to1
5notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.4
ostElpsInstanceStatusLocalRevert
This object indicates whether the local protection is set to revert.

The value 'true' indicates the local protection mode is revert.

The value 'false' indicates the local protection mode is…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.3.1.5
ostElpsInstanceStatusRemoteType
This object indicates the status of the remote protection type. It is
generally the same as the configured value, but may change based upon
configuration/status changes.

This object is undefined if the AP…
OMNITRON-TC-MIBOstElpsProtectType
Type Values:
1e1plus1UniNoAps
2e1plus1UniAps
3e1plus1BiAps
4e1to1
5notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.6
ostElpsInstanceStatusRemoteRevert
This object indicates whether the remote protection is set to revert.

The value 'true' indicates the remote protection mode is revert.

The value 'false' indicates the remote protection mode…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.3.3.1.7
ostElpsInstanceStatusLocalLink
This object indicates the status of the local requested signal.
OMNITRON-TC-MIBOstElpsSignalStates
Type Values:
0nullSignal
1normalSignal
2notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.8
ostElpsInstanceStatusLocalBridge
This object indicates the status of the local bridged signal.
OMNITRON-TC-MIBOstElpsSignalStates
Type Values:
0nullSignal
1normalSignal
2notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.9
ostElpsInstanceStatusRemoteLink
This object indicates the status of the remote requested signal.

This object is undefined if the APS frame exchange is not enabled.
OMNITRON-TC-MIBOstElpsSignalStates
Type Values:
0nullSignal
1normalSignal
2notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.10
ostElpsInstanceStatusRemoteBridge
This object indicates the status of the remote bridged signal.

This object is undefined if the APS frame exchange is not enabled.
OMNITRON-TC-MIBOstElpsSignalStates
Type Values:
0nullSignal
1normalSignal
2notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.11
ostElpsInstanceStatusCurrentRqState
This object indicates the current request/state.
OMNITRON-TC-MIBOstElpsRequestStates
Type Values:
0noRequest
1doNotRevert
2revertRequest
4exercise
5waitToRestore
6manualSwitchWorking
7manualSwitch
9signalDegrade
11signalFailWorking
13forcedSwitch
14signalFailProtection
15lockoutProtection
16notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.12
ostElpsInstanceStatusRemoteRqState
This object indicates the remote request/state.

This object is undefined if the APS frame exchange is not enabled.
OMNITRON-TC-MIBOstElpsRequestStates
Type Values:
0noRequest
1doNotRevert
2revertRequest
4exercise
5waitToRestore
6manualSwitchWorking
7manualSwitch
9signalDegrade
11signalFailWorking
13forcedSwitch
14signalFailProtection
15lockoutProtection
16notAvailable
 .1.3.6.1.4.1.7342.10.1.3.3.1.13
ostElpsInstanceStatusLastSwitchTime
The time of the last protection switch for the instance.

The value is initialized to zero and is updated when a protection
switch occurs.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.7342.10.1.3.3.1.14
ostElpsInstanceStatusLastSwitchSysTime
The system uptime of the last protection switch for the instance.

The value is initialized to zero and is updated when a protection
switch occurs.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7342.10.1.3.3.1.15
ostElpsInstanceStatusNumberSwitches
The number of protection switches.

The value is initialized at zero and increments for each protection
switch.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.3.1.16

ostElpsInstanceStatsTable

table
.1.3.6.1.4.1.7342.10.1.3.4 · 1 row entry · 27 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostElpsInstanceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-G8031-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-G8031-MIB::ostElpsInstanceStatsTable' 
This table supports ELPS instance statistic counters.
ostElpsInstanceStatsEntry row .1.3.6.1.4.1.7342.10.1.3.4.1
This is a ELPS instance statistics table entry.
Indexes
Column Syntax OID
ostElpsInstanceStatsIndex
An index to the ELPS Instance statisticss table which indicates
the specific ELPS instance for the module.

Rows are automatically created when a row in the
ostElpsInstanceCfgTable is created.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.7342.10.1.3.4.1.1
ostElpsInstanceStatsTxNoRequest
This attribute contains the number of APS frames transmitted that
contain the APS no request (NR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.2
ostElpsInstanceStatsTxDoNotRevert
This attribute contains the number of APS frames transmitted that
contain the APS do not revert (DNR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.3
ostElpsInstanceStatsTxRevertRequest
This attribute contains the number of APS frames transmitted that
contain the APS revert request (RR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.4
ostElpsInstanceStatsTxExercise
This attribute contains the number of APS frames transmitted that
contain the APS exercise (EXER) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.5
ostElpsInstanceStatsTxWaitToRestore
This attribute contains the number of APS frames transmitted that
contain the APS wait to restore (WTR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.6
ostElpsInstanceStatsTxSwitchWorking
This attribute contains the number of APS frames transmitted that
contain the APS manual switch to working (MS-W) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.7
ostElpsInstanceStatsTxManualSwitch
This attribute contains the number of APS frames transmitted that
contain the APS manual switch (MS) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.8
ostElpsInstanceStatsTxSignalDegrade
This attribute contains the number of APS frames transmitted that
contain the APS signal degrade (SD) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.9
ostElpsInstanceStatsTxSignalFailWorking
This attribute contains the number of APS frames transmitted that
contain the APS signal fail for working (SF) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.10
ostElpsInstanceStatsTxForcedSwitch
This attribute contains the number of APS frames transmitted that
contain the APS forced switch (FS) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.11
ostElpsInstanceStatsTxSignalFailProtection
This attribute contains the number of APS frames transmitted that
contain the APS signal fail for protection (SF-P) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.12
ostElpsInstanceStatsTxLockoutProtection
This attribute contains the number of APS frames transmitted that
contain the APS lockout of protection (LO) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.13
ostElpsInstanceStatsTxOther
This attribute contains the number of APS frames transmitted that
contain the APS reserved for future standardization request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.14
ostElpsInstanceStatsRxNoRequest
This attribute contains the number of APS frames received that
contain the APS no request (NR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.15
ostElpsInstanceStatsRxDoNotRevert
This attribute contains the number of APS frames received that
contain the APS do not revert (DNR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.16
ostElpsInstanceStatsRxRevertRequest
This attribute contains the number of APS frames received that
contain the APS revert request (RR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.17
ostElpsInstanceStatsRxExercise
This attribute contains the number of APS frames received that
contain the APS exercise (EXER) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.18
ostElpsInstanceStatsRxWaitToRestore
This attribute contains the number of APS frames received that
contain the APS wait to restore (WTR) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.19
ostElpsInstanceStatsRxSwitchWorking
This attribute contains the number of APS frames received that
contain the APS manual switch to working (MS-W) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.20
ostElpsInstanceStatsRxManualSwitch
This attribute contains the number of APS frames received that
contain the APS manual switch (MS) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.21
ostElpsInstanceStatsRxSignalDegrade
This attribute contains the number of APS frames received that
contain the APS signal degrade (SD) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.22
ostElpsInstanceStatsRxSignalFailWorking
This attribute contains the number of APS frames received that
contain the APS signal fail for working (SF) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.23
ostElpsInstanceStatsRxForcedSwitch
This attribute contains the number of APS frames received that
contain the APS forced switch (FS) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.24
ostElpsInstanceStatsRxSignalFailProtection
This attribute contains the number of APS frames received that
contain the APS signal fail for protection (SF-P) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.25
ostElpsInstanceStatsRxLockoutProtection
This attribute contains the number of APS frames received that
contain the APS lockout of protection (LO) request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.26
ostElpsInstanceStatsRxOther
This attribute contains the number of APS frames received that
contain the APS reserved for future standardization request/state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.3.4.1.27