OMNITRON-EXT-MIB Table View

This table supports Interface configuration.

ostInterfaceEntry row .1.3.6.1.4.1.7342.7.1.1.1.1

This is an Interface table entry.

Indexes

ostInterfaceIndex

Column	Syntax	OID
ostInterfaceIndex Chassis, module and port indices to which this interface belongs.	OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999	.1.3.6.1.4.1.7342.7.1.1.1.1.1
ostInterfacePortName The identifier associated with this interface.	OctetStringr/w Constraints: range: 0-45	.1.3.6.1.4.1.7342.7.1.1.1.1.2
ostInterfaceType The interface type, UNI or NNI, associated with this interface.	Enumerationr/w Enumerated Values: 0 undefined 1 nni 2 uni	.1.3.6.1.4.1.7342.7.1.1.1.1.3
ostInterfaceComponentID Component ID to which the port is assigned.	Unsigned32 Constraints: range: 1-8	.1.3.6.1.4.1.7342.7.1.1.1.1.4
ostInterfaceSfpMode Set the SFP mode. undefined = no SFP (read only) auto = examines diagnostic SFP ROM for speed & mode force100 = forces 100 Mbps SERDES mode force1000 = forces 1000 Mbps SERDES mode sgmii = forces sfp to SGMII …	Enumerationr/w Enumerated Values: 0 undefined 1 auto 2 force100 3 force1000 4 sgmii	.1.3.6.1.4.1.7342.7.1.1.1.1.5
ostInterfaceCfmEnable Enable CFM on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.6
ostInterfaceCommittedEgressInformationRate Committed Egress Information Rate in kb/sec. The maximum value and default for 10G ports is 10000000. The maximum value and default for 1G ports is 1000000.	Unsigned32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.7342.7.1.1.1.1.7
ostInterfaceQueueType Egress queue type. This object is deprecated.	Enumerationr/w Enumerated Values: 0 undefined 1 fairweight 2 starving	.1.3.6.1.4.1.7342.7.1.1.1.1.8
ostInterfaceLpbkEnable Enable loopback on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.9
ostInterfaceRstpMacLearning RSTP MAC learning setting. Default setting is on.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.7342.7.1.1.1.1.10
ostInterfacePauseEnable Enable Pause on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.11
ostInterfacePort The port associated with this interface.	OctetString Constraints: range: 0-14	.1.3.6.1.4.1.7342.7.1.1.1.1.12
ostInterfaceRJ45Mode The RJ45 mode for the port in a bit encoded value. bit0 : 0 = Auto Negotiation, 1 = Manual bit1 : 0 = 1000, 1 = 10/100 bit2 : 0 = 100, 1 = 10 bit3 : 0 = Full Duplex, 1 = Half Duplex This object is valid for RJ45 ports o…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.7342.7.1.1.1.1.13
ostInterfaceUnkEnable *** This object is deprecated *** Writing this object will have no effect. Enable Unknown CFM PDU tunneling on this port. True = enable False = disable	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.14
ostInterfaceMTU The ports ingress frame size. For the GM3, GM4, and GM4-PoE the maximum frame size is 10240 bytes. For the XM5 the maximum frame size is 10056 bytes. The ports mgt1 and mgt2 are fixed to a frame size of 2…	Integer32r/w Constraints: range: 64-10240	.1.3.6.1.4.1.7342.7.1.1.1.1.15
ostInterfaceTransmitDisable Enable/Disable the port transmission. True = transmission is disabled False = transmission is enabled For a laser light is enabled/disabled. For a copper port electrical transmission is enabled/disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.16
ostInterfaceAlsEnable Enable/Disable the auto link shutdown for the selected port. True = Auto link shutdown is enabled False = Auto link shutdown is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.1.1.17
ostInterfaceEgressSchedulingProfileId The index of the Scheduling profile associated for the selected port.	OMNITRON-TC-MIBOstEgressSchedulingProfileIndexTyper/w Type Constraints: range: 1..8	.1.3.6.1.4.1.7342.7.1.1.1.1.18
ostInterfaceLoopTimeout The ports loopback timeout in seconds. 0 disables the timeout. The default value is 30 seconds	Integer32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.7342.7.1.1.1.1.19
ostInterfaceLldpSelection This object indicates the LLDP port selection type. undefined(0) Port LLDP type is undefined or unknown standard(1) Port is a standard LLDP port type dpoe(2) Port is an enhan…	Enumerationr/w Enumerated Values: 0 undefined 1 standard 2 dpoe 3 dpoeAuto	.1.3.6.1.4.1.7342.7.1.1.1.1.20
ostInterfaceMirrorPortNumber This object indicates that the selected port, portnum, is acting as a mirror port for the portMirrorPortNumber. A value of '0' indicates normal port operation (no mirroring) for portnum. A non-zero value …	OMNITRON-TC-MIBOstPortNumberr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.7342.7.1.1.1.1.21
ostInterfaceMirrorRatio This object sets the ratio of frames from the mirror port to the listening port. For instance a value of '100' would send 1 out of 100 Ethernet frames to the mirror listening port. A value of '1' sends all the frames to…	Integer32r/w Constraints: range: 1-1000	.1.3.6.1.4.1.7342.7.1.1.1.1.22
ostInterfaceThresholdViolation This object sets the interface utilization threshold value expressed in milli-percent, where 1 indicates 0.001 percent. A threshold violation is declared when the utilization is greater than the utilization threshold v…	Unsigned32r/w Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.1.1.1.23
ostInterfaceColor This objects sets the interface to color aware or color unaware (color blind) mode. unaware(1) Port is configured in color unaware mode. Traffic that ingresses a port is cl…	Enumerationr/w Enumerated Values: 1 unaware 2 aware	.1.3.6.1.4.1.7342.7.1.1.1.1.24
ostInterfaceManagement This objects set the port to be a standard port or a dedicated management port. standard(1) Port is configured as a standard port that follows the EVC configuration …	Enumerationr/w Enumerated Values: 1 standard 2 dedicated	.1.3.6.1.4.1.7342.7.1.1.1.1.25

This table contains EVC entries for corresponding Interface entries.
More than one EVC entry can be associated with each Interface entry.

ostIfEvcEntry row .1.3.6.1.4.1.7342.7.1.1.2.1

This is an Interface EVC table entry.

Indexes

ostInterfaceIndex ostIfEvcIndex

Column	Syntax	OID
ostIfEvcRowStatus Status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.1.2.1.1
ostIfEvcCeVlanIdList The list of CE-VLAN IDs associated with the EVC named by ostInterfaceEvcName on this interface. The CE-VLAN IDs values are in text form, separated by comma characters.	OMNITRON-TC-MIBOstVlanIdListr/w Type Constraints: range: 0..110	.1.3.6.1.4.1.7342.7.1.1.2.1.2
ostIfEvcPrimaryVid The primary VID associated with this EVC on this interface.	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.1.2.1.3
ostIfEvcName The name associated with this EVC. Must be at least 1 character and unique.	OMNITRON-TC-MIBOstEvcNameStringr/w Type Constraints: range: 1..45	.1.3.6.1.4.1.7342.7.1.1.2.1.4
ostIfEvcIndex The index associated with this interface EVC row.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.1.2.1.5
ostIfEvcExceptVid The vid is not included in the evc CE-VLAN map.	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.1.2.1.6
ostIfEvcExceptOn The All-But-One setting for this EVC. True = The All-But-One Vid (ostIfEvcExceptVid) is defined for this EVC. False = No All-But-One Vid defined.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.1.2.1.7
ostIfEvcExtendedOn A vector of bits that indicates what Interface Extended Filtering options are selected. A bit set to '1' selects the Extended Filtering option. A bit set to '0' denotes the the Extended Fil…	Bitsr/w Enumerated Values: 0 bMacda 1 bMacsa 2 bEtype 3 bVid 4 bIpsrc 5 bIpdst 6 bL4src 7 bL4dst 8 bPcp 9 bDscp	.1.3.6.1.4.1.7342.7.1.1.2.1.8
ostIfEvcExtendedMacda This object specifies the Destination MAC for the Interface Extended Filtering Option.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7342.7.1.1.2.1.9
ostIfEvcExtendedMacsa This object specifies the Source MAC for the Interface Extended Filtering Option.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7342.7.1.1.2.1.10
ostIfEvcExtendedEtype This object specifies the Ethertype for the Interface Extended Filtering Option.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.1.2.1.11
ostIfEvcExtendedVid *** This object is deprecated ***	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.1.2.1.12
ostIfEvcExtendedIpsrc This object specifies the Source IPv4 address for the Interface Extended Filtering Option. Setting this object also impacts the ostIfEvcExtendedIpsrcString returned value. If an IPv4 address is written to…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.7.1.1.2.1.13
ostIfEvcExtendedIpdst This object specifies the Destination IPv4 address for the Interface Extended Filtering Option. Setting this object also impacts the ostIfEvcExtendedIpdstString returned value. If an IPv4 address is writt…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.7.1.1.2.1.14
ostIfEvcExtendedL4src This object specifies the Layer 4 (TCP/UDP) Source port for the Interface Extended Filtering Option.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.1.2.1.15
ostIfEvcExtendedL4dst This object specifies the Layer 4 (TCP/UDP) Destination port for the Interface Extended Filtering Option.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.1.2.1.16
ostIfEvcExtendedPcp This object specifies the VLAN priorities for the Interface Extended Filtering Option.	OMNITRON-TC-MIBOstPcpPriorityListr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.7342.7.1.1.2.1.17
ostIfEvcExtendedDscp This object specifies the IP priority for the Interface Extended Filtering Option.	OMNITRON-TC-MIBOstIpPriorityListr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.7342.7.1.1.2.1.18
ostIfEvcProName The object defines the protected EVC associated on this interface. If the object is uninitializaed (null length string) or is the same value as ostIfEvcName then the object indicates that the protected EV…	OMNITRON-TC-MIBOstEvcNameStringOrNoner/w Type Constraints: range: 0..45	.1.3.6.1.4.1.7342.7.1.1.2.1.19
ostIfEvcProCeVlanIdList This object defines the CE-VLAN IDs associated with the protected EVC on this interface. If the object value is uninitializaed (null length string) or is the same value as ostIfEvcCeVlanIdList then the ob…	OMNITRON-TC-MIBOstVlanIdListr/w Type Constraints: range: 0..110	.1.3.6.1.4.1.7342.7.1.1.2.1.20
ostIfEvcExtendedIpsrcString This object specifies the Source IPv4 or IPv6 address for the Interface Extended Filtering Option. Setting this object also impacts the ostIfEvcExtendedIpsrc returned value. If an IPv4 address is written …	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.1.2.1.21
ostIfEvcExtendedIpdstString This object specifies the Destination IPv4 or IPv6 address for the Interface Extended Filtering Option. Setting this object also impacts the ostIfEvcExtendedIpdst returned value. If an IPv4 address is wri…	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.1.2.1.22

This is a table of cable test results.

ostCableTestEntry row .1.3.6.1.4.1.7342.7.1.1.3.1

Cable test table entry.

Indexes

ostCableTestIndex

Column	Syntax	OID
ostCableTestIndex Chassis, module and port indices to which this interface belongs.	OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999	.1.3.6.1.4.1.7342.7.1.1.3.1.1
ostCableTestInit Writing any value to this object causes the initiation of the port cable test. When read the value returned is always '0'	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.1.3.1.2
ostCableTestStatus This object indicates the status of the coper cable test inititated via the cableTestInit object. undefined(0) Results are undefined or function not supported completeNoBreak(1) Test c…	Enumeration Enumerated Values: 0 undefined 1 completeNoBreak 2 completeBreakDetected 3 testInProcess 4 portNotCopper	.1.3.6.1.4.1.7342.7.1.1.3.1.3
ostCableTestResult This object indicates the distance that the cable is broken from its source. A value of zero indicates that a test has not been run successfully or there is no cable break detected.	metersSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.1.3.1.4

This table supports current port statistics objects. The entries
in this table are updated every five seconds and provides a snapshot
of port utilization and throughput.

ostPortStatisticsCurrentEntry row .1.3.6.1.4.1.7342.7.1.1.5.1

Port current statistics table entry.

Indexes

ostInterfaceIndex

Column	Syntax	OID
ostPortStatisticsCurrentTxThroughput This object indicates the average transmission throughput for a port during the last 5 seconds in expressed in bits/second. It is calculated based upon: (Number of octets transmitted)*8/(…	bits-per-secondSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.1.5.1.1
ostPortStatisticsCurrentTxUtilization This object contains the average transmisson utilization for a port during the last 5 seconds expressed in milli-percent, where 1 indicates 0.001 percent. It is calculated based upon: (os…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.1.5.1.2
ostPortStatisticsCurrentRxThroughput This object indicates the average receive throughput for a port during the last 5 seconds in expressed in bits/second. It is calculated based upon: (Number of octets received)*8/(5 second…	bits-per-secondSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.1.5.1.3
ostPortStatisticsCurrentRxUtilization This object contains the average received utilization for a port during the last 5 seconds expressed in milli-percent, where 1 indicates 0.001 percent. It is calculated based upon: (ostP…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.1.5.1.4

This table supports EVC configuration.
          
Modification of an existing EVC is allowed by changing the object
values for an existing entry. Any of the parameters of the EVC,
including the EVC name can be changed during modification.

ostEvcEntry row .1.3.6.1.4.1.7342.7.1.2.1.1

EVC table entry.

Indexes

ostModuleIndex ostEvcIndex

Column	Syntax	OID
ostEvcIndex The index associated with this EVC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.2.1.1.1
ostEvcRowStatus Status of the row. Used for row creation and destruction.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.2.1.1.2
ostEvcName The name associated with this EVC. Must be at least 1 character and unique.	OMNITRON-TC-MIBOstEvcNameStringr/w Type Constraints: range: 1..45	.1.3.6.1.4.1.7342.7.1.2.1.1.3
ostEvcVid The provider tag associated with this EVC.	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.2.1.1.4
ostEvcPortList A string specifying the list of ports associated with this EVC.	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.2.1.1.5
ostEvcPreserveCeVid Preservation maintains service frame CE-VLAN IDs across this EVC.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.2.1.1.6
ostEvcPreserveCeCos Preservation maintains service frame CE-CoS across this EVC.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.2.1.1.7
ostEvcProviderTrafficClass Provider traffic class where 0=discard, 1=lowest, 4=highest GM4, 8=highest XM5, default=1	Unsigned32r/w Constraints: range: 0-8	.1.3.6.1.4.1.7342.7.1.2.1.1.8
ostEvcProviderPriority The provider VLAN priority bits for PDU if sent tagged for this EVC.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.7342.7.1.2.1.1.9
ostEvcCTagPriority The C-Tag VLAN priority bits for PDU if sent tagged for this EVC.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.7342.7.1.2.1.1.10
ostEvcEnable Enable or disable ostEvcName.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.2.1.1.11
ostEvcTrust The Trust setting for this EVC. True = Trust. Use the priority bits of the ingressing frame for this EVC. The ostEvcProviderPriority object for this EVC was not set. False = No Trust…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.2.1.1.12
ostEvcVidSTagTranslation The provider tag that is associated with the EVC on the port ostEvcPortListSTagTranslation.	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.2.1.1.13
ostEvcPortListSTagTranslation A string specifying the port associated with ostEvcVidSTagTranslation VID.	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.2.1.1.14
ostEvcMode This object defines the EVC mode. The value 'normal' indicates that the EVC is a normal EVC and the S-TAG is preserved across ENNI ports. The value 'stagTranslation' indicates that the EVC …	Enumerationr/w Enumerated Values: 1 normal 2 stagTranslation	.1.3.6.1.4.1.7342.7.1.2.1.1.15
ostEvcManagementPort1 This object defines whether the management port 1 associated with the EVC is active or inactive. inactive(1) Indicates that a management port is not present on the current EVC or that if the…	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.7342.7.1.2.1.1.16
ostEvcManagementPort2 This object defines whether the management port 2 associated with the EVC is active or inactive. inactive(1) Indicates that a management port is not present on the current EVC or that if the…	Enumerationr/w Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.7342.7.1.2.1.1.17
ostEvcProtect This object defines whether the specific EVC can be deleted. noProtect(1) This value indicates that the EVC can be deleted protect(2) This value indicates that the EVC cannot be delet…	Enumerationr/w Enumerated Values: 1 noProtect 2 protect	.1.3.6.1.4.1.7342.7.1.2.1.1.18
ostEvcEtreePortList A string specifying the ports associated with an E-Tree EVC that are defined as Root ports. Ports not listed are designated as Leaf ports. The value of this object is ignored if ostEvcType is 'standard'. …	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.2.1.1.19
ostEvcType This object defines type of EVC. standardEvc(1) The EVC type is a standard EVC, following normal forwarding rules for all the ports associated with the EVC (ostEvcPortList) …	Enumerationr/w Enumerated Values: 1 standardEvc 2 simpleETree 3 branchETree 4 trunkETree	.1.3.6.1.4.1.7342.7.1.2.1.1.20
ostEvcTrafficClassTrust The class trust setting for this EVC. True = Trust. Use the priority bits of the ingressing frame to map to the correct class (output queue). The ostEvcProviderTrafficClass object for this E…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.2.1.1.21

This table supports module global settings.

ostModuleSettingsEntry row .1.3.6.1.4.1.7342.7.1.3.1.1

Module Settings table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostModuleIndex The module chassis and slot numbers. Base 10 Format: CCSS where CC is the chassis index, 1 to 99 SS is the slot index, 1 to 99	OMNITRON-TC-MIBOstModuleSingleIndex Type Constraints: range: 101..9999	.1.3.6.1.4.1.7342.7.1.3.1.1.1
ostEnableEvcProcessing Enable or disable EVC processing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.1.1.2
ostCustomerEthertype Customer ethertype value.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.3.1.1.3
ostProviderEthertype Provider ethertype value.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.3.1.1.4
ostSaveSettings Writing any value to this object saves the current extension settings to flash. This is a write only object. This object is used in conjunction with ostSaveStatus.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.3.1.1.5
ostCfmTrapEnables This object is a bit string, where each bit controls whether a CFM trap is enabled or disabled. When a bit is set to 1, the associated trap is enabled. The trap controlled by each bit is defined as follow…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.1.1.6
ostSnmpTrapPortNum This object configures the SNMP trap target port. The default value is 162.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.7342.7.1.3.1.1.7
ostSntpEnable Enable or disable SNTP processing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.1.1.8
ostSntpServerIp1 SNTP server 1 IPv4 address. Setting this object also impacts the ostSntpServerIp1String returned value. If an IPv4 address is written to this object the two objects return the same value. If ostSntpServer…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.7.1.3.1.1.9
ostSntpServerIp2 SNTP server 2 IPv4 address. Setting this object also impacts the ostSntpServerIp2String returned value. If an IPv4 address is written to this object the two objects return the same value. If ostSntpServer…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.7.1.3.1.1.10
ostSntpTimeZone Set the time zone. 1 GMT Greenwich Mean Time UTC 2 UTC Coordinated Universal Time UTC 3 WET Western European Time UTC 4 Z Zulu Time Zone UTC 5 N …	Unsigned32r/w Constraints: range: 1-81	.1.3.6.1.4.1.7342.7.1.3.1.1.11
ostSntpServerInterval SNTP server request interval in minutes.	Unsigned32r/w Constraints: range: 1-60	.1.3.6.1.4.1.7342.7.1.3.1.1.12
ostDaytimeEnable Enable or disable Daytime protocol processing. Default setting is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.1.1.13
ostDaytimeServerIp Daytime server IPv4 address. Setting this object also impacts the ostDaytimeServerIpString returned value. If an IPv4 address is written to this object the two objects return the same value. If ostDaytime…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.7342.7.1.3.1.1.14
ostDaytimeServerType The Daytime server type, tcp or udp. Default setting is type udp.	Enumerationr/w Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.7342.7.1.3.1.1.15
ostDaytimeServerInterval Daytime server request interval in minutes. Default setting is 10 minutes.	Unsigned32r/w Constraints: range: 1-60	.1.3.6.1.4.1.7342.7.1.3.1.1.16
ostCfmXcAutoLearning Enables or disables automatic learning of cross connecting remote MEPs. Default setting is off.	Enumerationr/w Enumerated Values: 1 off 2 on	.1.3.6.1.4.1.7342.7.1.3.1.1.17
ostClearTrapLog Writing any value to this object causes the trap log to be cleared. This is a write only object.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.3.1.1.18
ostSntpIpSrc SNTP source IP address number, default is 1 (IP1)	Unsigned32r/w Constraints: range: 1-2	.1.3.6.1.4.1.7342.7.1.3.1.1.19
ostDaytimeIpSrc Daytime source IP address number, default is 1 (IP1)	Unsigned32r/w Constraints: range: 1-2	.1.3.6.1.4.1.7342.7.1.3.1.1.20
ostNumEgressSchedulingProfiles A integer value for the number of Egress Scheduling Profiles per module. Used with ostSchedulingProfile Table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.1.1.21
ostNumPortEgressQueues A integer value for the number of Port Egress Queues per module. Used with ostEgressQueue Table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.1.1.22
ostClearMacTable Writing any value to this object causes the learned MAC addresses to be cleared. This is a write only object.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.3.1.1.23
ostFixedCompId *** NOT SUPPORTED IN V5.3 *** This object fixes the IEEE Comp ID to be the same as the port number or dynamic based upon the port type selected (UNI or NNI). undefined (0) Configuration i…	Enumerationr/w Enumerated Values: 0 undefined 1 dynamic 2 fixed	.1.3.6.1.4.1.7342.7.1.3.1.1.24
ostSynceSource This object indicates the source of the port clocks for each of the PHYs. A value of 0 indicates that the source of the clock is from the on board oscillator. A value of 1..5 indicates that…	Unsigned32r/w Constraints: range: 0-5	.1.3.6.1.4.1.7342.7.1.3.1.1.25
ostEgressPolicingType Sets the specific module egress policing mode which is used to count bytes for egress bandwidth profile calculation purposes. Applicable for the XM5 only. policingL1(1) L1 includes all bytes in frame, in…	Enumerationr/w Enumerated Values: 1 policingL1 2 policingL2	.1.3.6.1.4.1.7342.7.1.3.1.1.26
ostFirmwareRestartType Sets whether the module is automatically restarted after the firmware is updated or must be manually restarted. auto(1) Module is automatically restarted after firmware is updated …	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.7342.7.1.3.1.1.27
ostFpgaRestartType Sets whether the module's FPGA is automatically restarted after the firmware is updated or must be manually restarted. auto(1) FPGA is automatically restarted after FPGA image is upd…	Enumerationr/w Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.7342.7.1.3.1.1.28
ostGlobalPauseEnable Enable Pause on this module. True indicates pause (flow control) is globally enabled. False indicates pause (flow control) is globally disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.1.1.29
ostZtpEnable THis object configures the module Zero Touch provisioning modes. noZtp(0) ZTP is disabled, standard startup operation stdZtp(1) Standard ZTP using DHCP and TFTP li…	Enumerationr/w Enumerated Values: 0 noZtp 1 stdZtp 2 listenZtp 3 activateZtp	.1.3.6.1.4.1.7342.7.1.3.1.1.30
ostSynceClockStatus This object indicates the status of the synchronous Ethernet (SyncE) clock status if synce has been enabled via the ostSynceSource object. Currently this object is applicable to the XM5 only. …	Enumeration Enumerated Values: 1 notApplicable 2 internal 3 linkUpAcquiring 4 linkUpLocked 5 linkUpLockedHoldover 6 linkDownHoldover 7 linkDownFreerun 8 linkUpNotLocked	.1.3.6.1.4.1.7342.7.1.3.1.1.31
ostSntpServerIp1String SNTP server 1 IPv4 or IPv6 address. Setting this object also impacts the ostSntpServerIp1 returned value. If an IPv4 address is written to this object the two objects return the same value. If this object…	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.3.1.1.32
ostSntpServerIp2String SNTP server 2 IPv4 or IPv6 address. Setting this object also impacts the ostSntpServerIp2 returned value. If an IPv4 address is written to this object the two objects return the same value. If this object…	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.3.1.1.33
ostDaytimeServerIpString Daytime server IPv4 or IPv6 address. Setting this object also impacts the ostDaytimeServerIp returned value. If an IPv4 address is written to this object the two objects return the same value. If this obj…	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.3.1.1.34
ostModulePrompt This object specifies the CLI prompt.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.7342.7.1.3.1.1.35
ostModuleSplashWarning This object specifies the splash screen warning message for the CLI. The message is displayed after the normal splash screen and before the CLI prompt.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.7342.7.1.3.1.1.36
ostConsoleEnable This object enables or disables the serial console port enabled(1) enable the serial console port, serial console port works in a normal way disable(2) disable the se…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.3.1.1.37

This table supports module global status.

ostModuleStatusEntry row .1.3.6.1.4.1.7342.7.1.3.2.1

Module Status table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostSaveStatus A value of 0 indicates all extension settings have been saved to flash. This object is used in conjunction with ostSaveSettings.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.3.2.1.1
ostModifyCount This counter is incremented each time a configuration setting is changed, such that the ostSaveStatus object would become non-zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.2.1.2
ostSnmpErrorCount This counter is incremented each time a SNMP error is detected. The ostSnmpErrorMessage object indicates a description of the error. The initial value for this object is 0 and indicates that no SNMP error…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.2.1.3
ostSnmpErrorMessage This object is a textual string that indicates the reason that the SNMP error was generated for the ostSnmpErrorCount value. The initial value for this object is null and indicates that no SNMP errors hav…	OMNITRON-TC-MIBOstErrorString Type Constraints: range: 0..255	.1.3.6.1.4.1.7342.7.1.3.2.1.4
ostSnmpCpuUtilization This object indicates the busyness or utilization of the CPU expressed in milli-percent, where 1 indicates 0.001 percent.	Unsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.3.2.1.5
ostSnmpRamUsed This object indicates the amount RAM in kbytes that is currently being used by the CPU, where 1 indicates 1000 bytes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.2.1.6
ostSnmpFlashUsed This object indicates the amount flash memory in kbytes that is currently used, where 1 indicates 1000 bytes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.3.2.1.7
ostSaveState The state of the save process indicating if a save is needed and if the save opeeration completed idle(0) Save is not in process, no save is needed New save will be accepted …	Enumeration Enumerated Values: 0 idle 1 changed 2 inProcess 3 saveDone	.1.3.6.1.4.1.7342.7.1.3.2.1.8

This table supports module location and positiong information.

ostModuleLocationEntry row .1.3.6.1.4.1.7342.7.1.3.3.1

Module location table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostModuleLocationAddress This object is used to indicate the street address of a module. The text in this object is arbitrary, but it should reflect normal usage for the street address for the specific location	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.7342.7.1.3.3.1.1
ostModuleLocationCity This object is used to indicate the city of a module. The text in this object is arbitrary, but it should reflect normal usage for the city name for the specific location.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.7342.7.1.3.3.1.2
ostModuleLocationState This object is used to indicate the state or province of a module. The text in this object is arbitrary, but it should reflect normal usage for the state or province for the specific location.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.7342.7.1.3.3.1.3
ostModuleLocationPostalCode This object is used to indicate the postal code or zip code of a module. The text in this object is arbitrary, but it should reflect local usage of the the postal or zip code.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7342.7.1.3.3.1.4
ostModuleLocationLatitude This object is used to indicate the latitude of a module in degress. The format of the latitude can be a value from '+90.000000' to '-90.000000' where a positive number is North and and a negative number …	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7342.7.1.3.3.1.5
ostModuleLocationLongitude This object is used to indicate the longitude of a module in degrees. The format of the longitude can be a value from '+180.000000' to '-180.000000', where a positive number is West and and a negative num…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7342.7.1.3.3.1.6
ostModuleLocationAltitude This object is used to indicate the altitude of a module in meters. The value can be above or below sea level. The format of the altitude can be a value from '100000000.000000' to '-1000000.000000', where…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.7342.7.1.3.3.1.7

This table supports module link redundancy configuration and status.

ostModuleLinkRedundancyEntry row .1.3.6.1.4.1.7342.7.1.3.4.1

Module Link Redundancy table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostModuleLinkRedundancyEnable This object specifies whether the Link Redundancy function is enabled. The value 'true' indicates that Link Redundancy is enabled. The value 'false' indicates that Link Redundancy is disabl…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.4.1.1
ostModuleLinkRedundancyReturnWorking This object specifies whether the Link Redundancy return to working port is enabled. The value 'true' indicates that Link Redundancy return to working port is enabled. The value 'false' ind…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.4.1.2
ostModuleLinkRedundancyWorkingPort This object specifies the Working Port number.	OMNITRON-TC-MIBOstPortNumberr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.7342.7.1.3.4.1.3
ostModuleLinkRedundancyProtectionPort This object specifies the Protection Port number.	OMNITRON-TC-MIBOstPortNumberr/w Type Constraints: range: 0..99	.1.3.6.1.4.1.7342.7.1.3.4.1.4
ostModuleLinkRedundancyWorkingPortStatus This object indicates the Working Port Status. na(0) Not Applicable, port state is unknown or not linked forward(1) Port is in the Active (forward…	OMNITRON-TC-MIBOstErpsPortState Type Values: 0 na 1 forward 2 blocked	.1.3.6.1.4.1.7342.7.1.3.4.1.5
ostModuleLinkRedundancyWorkingPortLink This object indicates the Working Port link state. na(0) Not Applicable, port link state is unknown up(1) Port is linked and capable of passing traffic down(2) …	OMNITRON-TC-MIBOstErpsLinkState Type Values: 0 na 1 up 2 down	.1.3.6.1.4.1.7342.7.1.3.4.1.6
ostModuleLinkRedundancyProtectionPortStatus This object indicates the Protection Port Status. na(0) Not Applicable, port state is unknown or not linked forward(1) Port is in the Active (forw…	OMNITRON-TC-MIBOstErpsPortState Type Values: 0 na 1 forward 2 blocked	.1.3.6.1.4.1.7342.7.1.3.4.1.7
ostModuleLinkRedundancyProtectionPortLink This object indicates the Protection Port link state. na(0) Not Applicable, port link state is unknown up(1) Port is linked and capable of passing traffic down(2) …	OMNITRON-TC-MIBOstErpsLinkState Type Values: 0 na 1 up 2 down	.1.3.6.1.4.1.7342.7.1.3.4.1.8

This table supports module DHCP relay configuration.

ostModuleDhcpRelayCfgEntry row .1.3.6.1.4.1.7342.7.1.3.5.1

Module DHCP relay Link Redundancy configuration table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostModuleDhcpRelayCfgRelayEnable This object specifies whether the DHCP relay function is enabled. The value 'true' indicates that DHCP relay function is enabled. The value 'false' indicates that DHCP relay function is dis…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.5.1.1
ostModuleDhcpRelayCfgCircuitIdEnable This object specifies whether the DHCP relay function Circuit ID is enabled. The value 'true' indicates that DHCP relay function Circuit ID is enabled. The value 'false' indicates that DHCP…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.5.1.2
ostModuleDhcpRelayCfgRemoteIdEnable This object specifies whether the DHCP relay function Remote ID is enabled. The value 'true' indicates that DHCP relay function Remote ID is enabled. The value 'false' indicates that DHCP r…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.3.5.1.3
ostModuleDhcpRelayCfgServerIpAddress This object specifies the DHCP Server used by the DHCP relay function.	OMNITRON-TC-MIBOstIpAddrr/w Type Constraints: range: 0..39	.1.3.6.1.4.1.7342.7.1.3.5.1.4
ostModuleDhcpRelayCfgRelayType This object specifies the DHCP Relay type. drop(1) Drops DHCP relay frames received on a client-side port keep(2) Keeps DHCP relay frames received on a client-side port and …	Enumerationr/w Enumerated Values: 1 drop 2 keep 3 replace	.1.3.6.1.4.1.7342.7.1.3.5.1.5

This table supports module Link Mode configuration.

ostModuleLinkModeCfgEntry row .1.3.6.1.4.1.7342.7.1.3.6.1

Module Link Mode configuration table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostModuleLinkModeCfgSelect This object specifies the Link Mode select type. This object is supported for the XM5 only. none(1) No link mode is specified. This is equivalent to Link Segment in other modules. …	Enumerationr/w Enumerated Values: 1 none 2 lpt	.1.3.6.1.4.1.7342.7.1.3.6.1.1
ostModuleLinkModeCfgStatus This object specifies the Link Mode status. This object is supported for the XM5 only. startup(1) Start up, not operating in a link propagate mode ok(2) Both ports are up and the mod…	Enumeration Enumerated Values: 1 startup 2 ok 3 p1Down 4 p2Down 5 wait	.1.3.6.1.4.1.7342.7.1.3.6.1.2

This table supports bandwidth profile settings.

ostBandwidthProfileEntry row .1.3.6.1.4.1.7342.7.1.4.1.1

Bandwidth profile settings table entry.

Indexes

ostBwpModuleIndex ostBwpIndex

Column	Syntax	OID
ostBwpModuleIndex Chassis and module indices to which this bandwidth profile belongs.	OMNITRON-TC-MIBOstModuleSingleIndex Type Constraints: range: 101..9999	.1.3.6.1.4.1.7342.7.1.4.1.1.1
ostBwpIndex The index associated with this bandwidth profile.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.4.1.1.2
ostBwpRowStatus Status of the row. Used for row creation and destruction.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.4.1.1.3
ostBwpName The identifier associated with this profile.	OctetStringr/w Constraints: range: 1-45	.1.3.6.1.4.1.7342.7.1.4.1.1.4
ostBwpEnable Enable or disable bandwidth profile. Default is enable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.4.1.1.5
ostBwpUniPort True when profile is associated with a UNI port. Default is false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.4.1.1.6
ostBwpEvcName The name of EVC associated with this BWP.	OMNITRON-TC-MIBOstEvcNameStringOrNoner/w Type Constraints: range: 0..45	.1.3.6.1.4.1.7342.7.1.4.1.1.7
ostBwpCommittedBurstSize Committed Burst Size in KBs. Default is 15.	Unsigned32r/w Constraints: range: 5-256000	.1.3.6.1.4.1.7342.7.1.4.1.1.8
ostBwpCommittedIngressInformationRate Committed Ingress Information Rate in kb/sec. The maximum value for 10G ports is 10000000. The maximum value for 1G ports is 1000000. Default is 0.	Unsigned32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.7342.7.1.4.1.1.9
ostBwpClassOfServiceName Class of service identifier name.	OMNITRON-TC-MIBOstCosNameStringOrNoner/w Type Constraints: range: 0..45	.1.3.6.1.4.1.7342.7.1.4.1.1.10
ostBwpExcessBurstSize Excess Burst Size in KBs. Default is 15.	Unsigned32r/w Constraints: range: 5-256000	.1.3.6.1.4.1.7342.7.1.4.1.1.11
ostBwpExcessInformationRate Excess Information Rate in kb/sec. The maximum value for 10G ports is 10000000. The maximum value for 1G ports is 1000000. Default is 0.	Unsigned32r/w Constraints: range: 0-10000000	.1.3.6.1.4.1.7342.7.1.4.1.1.12
ostBwpPortList A string specifying the list of ports associated with this Bandwidth Profile.	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.4.1.1.13
ostBwpCouplingFlag The Coupling Flag allows the choice between two modes of operation of the rate enforcement algorithm for the GM3/GM4/XM5. Default is false.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.4.1.1.14
ostBwpCouplingType The Coupling Type allows the selection on how CIR and EIR interact with each other for the GM3/GM4. It is an enhancment of the ostBwpCouplingFlag object. ostBwpCouplingFlag is ignored for cirEirCoupleColo…	Enumerationr/w Enumerated Values: 1 cirEirCoupleDependent 2 cirEirNotCoupled 3 cirEirCoupleColorUnaware 4 cirEirCoupleColorAware	.1.3.6.1.4.1.7342.7.1.4.1.1.15
ostBwpPolicingType This object allows that the bandwidth profile to be associated with hierarchical policers. policingTypeNormal(1) Normal policing type, no hierarchical policers, single level police…	Enumerationr/w Enumerated Values: 1 policingTypeNormal 2 policingTypeLevel1 3 policingTypeLevel2	.1.3.6.1.4.1.7342.7.1.4.1.1.16
ostBwpPolicingAssociationName The bandwidth profile next level identifier that is associated with this specific bandwidth profile. This object associates the current specific bandwdith profile output to a secondary policer indicated by this object's…	OctetStringr/w Constraints: range: 0-45	.1.3.6.1.4.1.7342.7.1.4.1.1.17
ostBwpColorMode The Color Mode flag. A value of True indicates the BWP is color aware. A value of False indicates the BWP is color blind (color blind) Default is false. For the GM3/GM4 writing a value to this object is i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.4.1.1.18
ostBwpPerformanceEnable This object indicates whether a performance data set is configured for a specific bandwidth profile. This allows for only specific bandwidth profiles to be monitored if there are limitations in the module being accessed…	Enumerationr/w Enumerated Values: 1 disablePerformanceDataSet 2 enablePerformanceDataSet	.1.3.6.1.4.1.7342.7.1.4.1.1.19
ostBwpPerformanceStatsClear Writing any value to this object clears the counter values of the associated row in the ostBandwidthProfilePerformanceTable. If no row exists for this BWP in the ostBandwidthProfilePerformanceTable no err…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.4.1.1.20
ostBwpPolicingMode Sets the specific bandwidth profile policing mode which is used to count bytes for bandwidth profile calculation purposes. Applicable for the XM5 only. policingL1(1) L1 includes all bytes in frame, inter…	Enumerationr/w Enumerated Values: 1 policingL1 2 policingL2 3 policingL3	.1.3.6.1.4.1.7342.7.1.4.1.1.21
ostBwpCtv Enable or disable CIR threshold violation notification. Default is disable, 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.4.1.1.22

This table supports bandwidth profile performance data. This table is
created when a bandwidth profile is added with the ostBwpPerformanceEnable
set to enabled.

ostBandwidthProfilePerformanceEntry row .1.3.6.1.4.1.7342.7.1.4.2.1

Bandwidth profile performance table entry.

Indexes

ostBwpModuleIndex ostBwpIndex

Column	Syntax	OID
ostBwpPerformanceGreenOctets This object indicates the number of valid green octets that were received on the module for the associated bandwidth profile. This object defaults to '0'.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.1
ostBwpPerformanceYellowOctets This object indicates the number of valid yellow octets that were received on the module for the associated bandwidth profile. This object defaults to '0'.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.2
ostBwpPerformanceRedOctets This object indicates the number of valid red octets that were received on the module for the associated bandwidth profile. This object defaults to '0'.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.3
ostBwpPerformanceGreenThroughput This object indicates the average receive throughput for a green BWP during the last 5 seconds is expressed in bits/second. It is calculated based upon: (Number of octets received)*8/(5 s…	bits-per-secondSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.4
ostBwpPerformanceGreenUtilization This object contains the average received utilization for a green BWP during the last 5 seconds expressed in milli-percent, where 1 indicates 0.001 percent. It is calculated based upon: …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.4.2.1.5
ostBwpPerformanceYellowThroughput This object indicates the average receive throughput for a yellow BWP during the last 5 seconds is expressed in bits/second. It is calculated based upon: (Number of octets received)*8/(5 …	bits-per-secondSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.6
ostBwpPerformanceYellowUtilization This object contains the average received utilization for a yellow BWP during the last 5 seconds expressed in milli-percent, where 1 indicates 0.001 percent. It is calculated based upon: …	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.4.2.1.7
ostBwpPerformanceRedThroughput This object indicates the average receive traffic that is classified as red for the BWP and typically indicates received traffic that exceeds the combined CIR and EIR during the last 5 seconds is expressed in bits/seco…	bits-per-secondSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7342.7.1.4.2.1.8
ostBwpPerformanceRedUtilization This object contains the average received utilization for traffic classfied as red for the BWP during the last 5 seconds expressed in milli-percent, where 1 indicates 0.001 percent. It is calculated base…	milli-percentUnsigned32 Constraints: range: 0-100000	.1.3.6.1.4.1.7342.7.1.4.2.1.9

This table supports L2CP settings.

ostL2cpEntry row .1.3.6.1.4.1.7342.7.1.5.1.1

L2CP settings table entry.
The ostInterfaceIndex port field supports values from 1 to 6.

Indexes

ostInterfaceIndex ostL2cpDstMacAddrIndex

Column	Syntax	OID
ostL2cpDstMacAddrIndex Sets L2CP destination address.	OMNITRON-TC-MIBOstCosL2cpDstAddr Type Constraints: range: 1..20	.1.3.6.1.4.1.7342.7.1.5.1.1.1
ostL2cpType Sets L2CP type setting.	Enumerationr/w Enumerated Values: 1 discard 2 tunnel 3 forward 4 peer	.1.3.6.1.4.1.7342.7.1.5.1.1.2

This supports L2PT global settings.

ostl2ptGlobalEntry row .1.3.6.1.4.1.7342.7.1.5.2.1

L2PT global settings table entry.

Indexes

ostModuleIndex

Column	Syntax	OID
ostl2ptGlobalInstanceNextIndex This object contains an unused value for next L2PT instance on a module that can be used to implement L2PT, or a zero to indicate that none exist. This value needs to be read in order to find an available…	OMNITRON-TC-MIBOstIndexIntegerNextFree Type Constraints: range: 0..16	.1.3.6.1.4.1.7342.7.1.5.2.1.1
ostl2ptGlobalCdpDropThreshold This object specifies the number of kbits per sec that are allowed for CDP. Frames above this rate are dropped and are not tunneled if tunneling is enabled.	Unsigned32r/w Constraints: range: 0-200	.1.3.6.1.4.1.7342.7.1.5.2.1.2
ostl2ptGlobalL2cpDropThreshold This object specifies the number of kbits per seconds that are allowed for L2CP addresses. Frames above this rate are dropped and are not tunneled if tunneling is enabled.	Unsigned32r/w Constraints: range: 0-200	.1.3.6.1.4.1.7342.7.1.5.2.1.3
ostl2ptGlobalVtpDropThreshold This object specifies the number of kbits per seconds that are allowed for VTP. Frames above this rate are dropped and are not tunneled if tunneling is enabled.	Unsigned32r/w Constraints: range: 0-200	.1.3.6.1.4.1.7342.7.1.5.2.1.4
ostl2ptGlobalPvstDropThreshold This object specifies the number of kbits per seconds that are allowed for PVST. Frames above this rate are dropped and are not tunneled if tunneling is enabled.	Unsigned32r/w Constraints: range: 0-200	.1.3.6.1.4.1.7342.7.1.5.2.1.5
ostl2ptGlobalEncapDropThreshold This object specifies the number of kbits per seconds that are allowed for frames that have been encapsulated. Frames above this rate are dropped and are not restored to their original protocol if tunneling is not enabl…	Unsigned32r/w Constraints: range: 0-200	.1.3.6.1.4.1.7342.7.1.5.2.1.6
ostl2ptGlobalTranslateNextIndex This object contains an unused value for next L2PT translate instance on a module that can be used to implement L2PT translation, or a zero to indicate that none exist. This value needs to be read in orde…	OMNITRON-TC-MIBOstIndexIntegerNextFree Type Constraints: range: 0..16	.1.3.6.1.4.1.7342.7.1.5.2.1.7

This is a table for L2PT (Layer 2 Protocol Tunneling)

ostl2ptEntry row .1.3.6.1.4.1.7342.7.1.5.3.1

L2PT entry.

Indexes

ostModuleIndex ostl2ptIndex

Column	Syntax	OID
ostl2ptIndex An index to the L2PT index table which indicates the specific L2PT instance for the module. Valid range is 1 to 5. ostl2ptGlobalInstanceNextIndex needs to be inspected to find an available index for row-c…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.5.3.1.1
ostl2ptRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.5.3.1.2
ostl2ptCdpEnable The CDP L2PT enable object. undefined(0) CDP enable is undefined or illegal enabled(1) CDP L2PT is enabled (tunneling) disabled(2) CDP L2PT is disabled (no tunneling) The default v…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.3
ostl2ptStpEnable The STP (Spanning Tree Protocol) L2PT enable object. undefined(0) STP enable is undefined or illegal enabled(1) STP L2PT is enabled (tunneling) disabled(2) STP L2PT is disabled (no tunneling) …	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.4
ostl2ptVtpEnable The VTP L2PT enable object. undefined(0) VTP enable is undefined or illegal enabled(1) VTP L2PT is enabled (tunneling) disabled(2) VTP L2PT is disabled (no tunneling) The default v…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.5
ostl2ptPvstEnable The VTP L2PT enable object. undefined(0) PVST enable is undefined or illegal enabled(1) PVST L2PT is enabled (tunneling) disabled(2) PVST L2PT is disabled (no tunneling) The defaul…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.6
ostl2ptEvcName The name associated with this EVC for L2PT instance. Must be at least 1 character and unique.	OMNITRON-TC-MIBOstEvcNameStringr/w Type Constraints: range: 1..45	.1.3.6.1.4.1.7342.7.1.5.3.1.7
ostl2ptEncapsulatedPorts The list of ports that are encapsulated for the L2PT instance. At least one port must be selected. Management Ports are not included.	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.5.3.1.8
ostl2ptSlowProtocolEnable The Slow Protocol address 01-80-c2-00-00-02 L2PT enable object. undefined(0) Slow Protocol L2PT enable is undefined or illegal enabled(1) Slow Protocol L2PT is enabled (tunneling) disabled(2) Slo…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.9
ostl2ptPortAuthEnable The Port Authentication address 01-80-c2-00-00-03 L2PT enable object. undefined(0) Port Authentication L2PT enable is undefined or illegal enabled(1) Port Authentication L2PT is enabled (tunneling) …	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.10
ostl2ptMac04Enable The L2CP MAC address 01-80-c2-00-00-04 L2PT enable object. undefined(0) MAC 01-80-c2-00-00-04 L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-04 L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.11
ostl2ptMac05Enable The L2CP MAC address 01-80-c2-00-00-05 L2PT enable object. undefined(0) MAC 01-80-c2-00-00-05 L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-05 L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.12
ostl2ptMac06Enable The L2CP MAC address 01-80-c2-00-00-06 L2PT enable object. undefined(0) MAC 01-80-c2-00-00-06 L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-06 L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.13
ostl2ptElmiEnable The E-LMI address 01-80-c2-00-00-07 L2PT enable object. undefined(0) E-LMI L2PT enable is undefined or illegal enabled(1) E-LMI L2PT is enabled (tunneling) disabled(2) E-LMI L2PT is disabled (no …	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.14
ostl2ptMac08Enable The L2CP MAC address 01-80-c2-00-00-08 L2PT enable object. undefined(0) MAC 01-80-c2-00-00-08 L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-08 L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.15
ostl2ptMac09Enable The L2CP MAC address 01-80-c2-00-00-09 L2PT enable object. undefined(0) MAC 01-80-c2-00-00-09 L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-09 L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.16
ostl2ptMac0aEnable The L2CP MAC address 01-80-c2-00-00-0a L2PT enable object. undefined(0) MAC 01-80-c2-00-00-0a L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-0a L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.17
ostl2ptMac0bEnable The L2CP MAC address 01-80-c2-00-00-0b L2PT enable object. undefined(0) MAC 01-80-c2-00-00-0b L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-0b L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.18
ostl2ptMac0cEnable The L2CP MAC address 01-80-c2-00-00-0c L2PT enable object. undefined(0) MAC 01-80-c2-00-00-0c L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-0c L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.19
ostl2ptMac0dEnable The L2CP MAC address 01-80-c2-00-00-0d L2PT enable object. undefined(0) MAC 01-80-c2-00-00-0d L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-0d L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.20
ostl2ptlldpEnable The LLDP MAC address 01-80-c2-00-00-02 L2PT enable object. undefined(0) LLDP L2PT enable is undefined or illegal enabled(1) LLDP L2PT is enabled (tunneling) disabled(2) LLDP L2PT is disabled (no …	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.21
ostl2ptMac0fEnable The L2CP MAC address 01-80-c2-00-00-0f L2PT enable object. undefined(0) MAC 01-80-c2-00-00-0f L2PT enable is undefined or illegal enabled(1) MAC 01-80-c2-00-00-0f L2PT is enabled (tunneling) disable…	Enumerationr/w Enumerated Values: 0 undefined 1 enabled 2 disabled	.1.3.6.1.4.1.7342.7.1.5.3.1.22

This is a table for LLDP DPoE Extensions

ostLldpEntry row .1.3.6.1.4.1.7342.7.1.5.4.1

LLDP extension local entry.

Indexes

ostLldpIndex

Column	Syntax	OID
ostLldpIndex An index to the LLDP extension table which indicates the specific LLDP port for the module.	OMNITRON-TC-MIBOstPortSingleIndex Type Constraints: range: 10101..999999	.1.3.6.1.4.1.7342.7.1.5.4.1.1
ostLldpReceiveStatus This object indicates the LLDP receive status. undefined(0) Port received status is indeterminate notReceiving(1) Port is not receiving LLDP PDUs receiving(2) Port is receiving LLDP P…	Enumeration Enumerated Values: 0 undefined 1 notReceiving 2 receiving	.1.3.6.1.4.1.7342.7.1.5.4.1.2
ostLldpDpoeStage This object indicates the current DPoE stage. A value of 0 indicates that DPoE is not enabled. Stage 1 = INIT state Stage 2 = PRE-DAC state Stage 3 = DAC-PATH state Stage 4 = DHCP state Sta…	Unsigned32 Constraints: range: 0-6	.1.3.6.1.4.1.7342.7.1.5.4.1.3
ostLldpDpoeStageStatus This object indicates the type of DPoE stage status. undefined(0) The status is indeterminate (info) inprocess(1) The status is running (info) dacTlvInfoChange(2) …	Enumeration Enumerated Values: 0 undefined 1 inprocess 2 dacTlvInfoChange 3 tftpProtocolError 4 tftpRetriesInProcess 5 tftpRetriesExhausted 6 configFileValidationFailure 7 dhcpRenewFailed 8 dhcpMessageTimeout 9 dhcpProcessTimeout 10 dhcpCriticalInfoMissing 11 dhcpNonCriticalInfoMissing 12 networkDiscoveryFailure 13 stageCompleted	.1.3.6.1.4.1.7342.7.1.5.4.1.4

This is a table for Remote LLDP DPoE Extensions. There is one
row in the table for each DPoE responder per port, based upon the
responder's MAC address

ostLldpRemoteEntry row .1.3.6.1.4.1.7342.7.1.5.5.1

LLDP extension remote entry.

Indexes

ostLldpIndex ostLldpRemoteMac

Column	Syntax	OID
ostLldpRemoteMac The remote LLDP responder's MAC address for a specific port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7342.7.1.5.5.1.1
ostLldpRemoteDpoeVersion This object indicates the remote DPoE version. A value of 0 indicates that DPoE is not enabled or the remote's DPoE version is indeterminate. The version is composed of a major version (0..15) and a minor…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.5.5.1.2
ostLldpRemoteDpoeConfig This object indicates the LLDP remote bridge sub-type. undefined (0) Bridge type is indeterminate or unknown ieee8021ad(1) Bridge type is 802.1ad ieee8021ahItag(2) Bridge type is I-…	Enumeration Enumerated Values: 0 undefined 1 ieee8021ad 2 ieee8021ahItag 3 ieee8021ahItagBtag	.1.3.6.1.4.1.7342.7.1.5.5.1.3
ostLldpRemoteDpoeStag This object indicates the remote DPoE S-Tag value for management traffic. A value of 0 indicates that DPoE is not enabled or the remote's DPoE S-Tag is indeterminate or is zero. The upper 1…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.5.5.1.4
ostLldpRemoteDpoeCtag This object indicates the remote DPoE C-Tag value for management traffic. A value of 0 indicates that DPoE is not enabled or the remote's DPoE C-Tag is indeterminate or is zero. The upper 1…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.5.5.1.5

This is a table for L2PT (Layer 2 Protocol Tunneling) translation.
          
The ostl2ptTranslateTable defaults to five rows:
          
Row #    ostl2PtTranslateL2cpAddress   ostl2PtTranslateL2ptAddress
1        01-80-c2-80-00-00-00          01-00-0c-cd-cd-d0
2        01-80-c2-80-00-00-02          01-00-0c-cd-cd-d4
3        01-80-c2-80-00-00-03          01-00-0c-cd-cd-d3
4        01-80-c2-80-00-00-07          01-00-0c-cd-cd-d7
5        01-80-c2-80-00-00-0e          01-00-0c-cd-cd-de

ostl2ptTranslateEntry row .1.3.6.1.4.1.7342.7.1.5.6.1

L2PT translate table entry.

Indexes

ostModuleIndex ostl2ptTranslateIndex

Column	Syntax	OID
ostl2ptTranslateIndex An index to the L2PT Translate table which indicates the specific L2PT translation instance for the module. Up to 15 L2CP MAC addresses can entered into this table. ostl2ptGlobalTranslateNextIndex needs t…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.5.6.1.1
ostl2ptTranslateRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.5.6.1.2
ostl2PtTranslateL2cpAddress This object specifies the original L2CP MAC address that is to be translated to the value of the ostl2PtTranslateL2ptAddress object. This object MUST be a value in the L2CP address space: 01-80-c2-00-00…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7342.7.1.5.6.1.3
ostl2PtTranslateL2ptAddress This object specifies the translated L2PT MAC address that is to be translated from the value of the ostl2PtTranslateL2cpAddress object. This object is preferred to be a value in the multicast address spa…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7342.7.1.5.6.1.4

This table supports OST CFM MA settings.

ostCfmMaEntry row .1.3.6.1.4.1.7342.7.1.6.1.1

OST CFM MA settings table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex

Column	Syntax	OID
ostCfmMaCcmTimeout The CCM timeout setting in milliseconds. Default setting is 3.5x CCM interval. Minimum setting is CCM interval, except for the GM4 which allows a setting of 10 ms. The GM3 only supports a minimum value of 100 ms.	Unsigned32r/w Constraints: range: 10-2100000	.1.3.6.1.4.1.7342.7.1.6.1.1.1
ostCfmMaCcmSequence This object selects whether CCM sequence numbers incremented. noSequence(1) CCM sequence numbers are not incremented sequence(2) CCM sequence numbers are incremented The rows in this tabl…	Enumerationr/w Enumerated Values: 1 noSequence 2 includeSequence	.1.3.6.1.4.1.7342.7.1.6.1.1.2

This table supports OST CFM MEP settings.

ostCfmMepEntry row .1.3.6.1.4.1.7342.7.1.6.2.1

OST CFM MEP settings table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier

Column	Syntax	OID
ostCfmMepLtmTimeout The CFM LTM timeout setting in seconds. Default setting is 5 seconds.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.7342.7.1.6.2.1.1
ostCfmMepLoopbackStatsClear Writing any value to this object clears the contents of the ostCfmLoopbackStatistics object.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.2.1.2
ostCfmMepLbmFreqSelect The frequency in milliseconds at which CFM LBMs are transmitted. Default setting is 1000.	Unsigned32r/w Constraints: range: 0-60000	.1.3.6.1.4.1.7342.7.1.6.2.1.3
ostCfmMepLbmTimeout The CFM LBM timeout setting in seconds. Default setting is 5 seconds.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.7342.7.1.6.2.1.4
ostCfmMepLoopbackStatistics CFM Loopback statistics.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.7342.7.1.6.2.1.5
ostCfmMepScomp Writing any value to this object places the mep on a UNI port to be a part of the S-component.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.2.1.6
ostCfmMepRdiTx true(1) indicates a RDI Tx.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7342.7.1.6.2.1.7
ostCfmMepProbeResponderType This object is used to determine the probe responder type. cpo(1) = disables responder cpe(2) = enables probe info on a per EVC basis (default value) cpp(3) = enables probe info on a fixed priority basis cph(4) = enable…	Enumerationr/w Enumerated Values: 1 cpo 2 cpe 3 cpp 4 cph	.1.3.6.1.4.1.7342.7.1.6.2.1.8
ostCfmMepCtagVid This object adds a C-Tag when the OAM PDU is initiated on an NNI port. Normally an OAM frame on a NNI port only has a S-TAG. The rows in this table are automatically created when a new row is added to the…	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.6.2.1.9
ostCfmMepProbeResponderVer This object is used to configure the probe responder version. v1 = Original 2006 version, CCM not counted at same MEG level v2 = Modified 2008 version, CCM counted at same MEG level	Enumerationr/w Enumerated Values: 1 v1 2 v2	.1.3.6.1.4.1.7342.7.1.6.2.1.10

This table supports MIP configuration and status display.

ostCfmMipEntry row .1.3.6.1.4.1.7342.7.1.6.3.1

This table supports the configuration of Explicit MIP table entry by setting the
RowStatus to an entry of this table indexed by the Module index (ostModuleIndex),
the index (ostMdIndex) to the Management Domain (MD) tab…

Indexes

ostModuleIndex ostMdIndex ostMaIndex ostCfmMipIndex

Column	Syntax	OID
ostMdIndex This is the index into the MD table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.3.1.1
ostMaIndex This is the index into the MA table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.3.1.2
ostCfmMipIndex This is the index into the Mip table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.3.1.3
ostCfmMipRowStatus Status of the row. Used for row creation and destruction.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.6.3.1.4
ostCfmMipVid This is the vid associated with the MIP. This variable along with ostCfmMipIfIndex variable can only be set when the ostCfmMipTable is created.	OMNITRON-TC-MIBOstVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.7342.7.1.6.3.1.5
ostCfmMipIfIndex This is the interface on which the MIP was created. This variable along with ostCfmMipVid can only be set when the ostCfmMipTable is created.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7342.7.1.6.3.1.6
ostCfmMipMdLevel This is the MD level on which the MIP was created, It is a read-only variable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.3.1.7
ostCfmMipCreatedMethod This shows the method through which the MIP was created. It can be ostExplicit(1), ostImplicitMa(2), ostImplicitMde(3), ostExplicitImplicitMa(4) and is a read-only variable.	OMNITRON-TC-MIBOstMipdMethodOfCreation Type Values: 1 ostExplicit 2 ostImplicitMa 3 ostImplicitMde 4 ostExplicitImplicitMa	.1.3.6.1.4.1.7342.7.1.6.3.1.8
ostCfmMipMhfCreation A value indicating the how the MHFs (MIP Half Function) was created for this VID at this MD Level. It is a read-only variable.	OMNITRON-TC-MIBOstMhfCreation Type Values: 1 ostMHFdefault 2 ostMHFexplicit	.1.3.6.1.4.1.7342.7.1.6.3.1.9
ostCfmMipScomp Writing any value to this object places the mip on a UNI port to be a part of the S-component.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7342.7.1.6.3.1.10

This table supports OST CFM RMEP settings and is used to explicitly
select an association of a local MEP with a RMEP. It only needs to be
configured if this there is an ambiguity of the association of a local
MEP and a remote MEP

ostCfmRmepEntry row .1.3.6.1.4.1.7342.7.1.6.4.1

OST CFM RMEP settings table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier IEEE8021-CFM-MIBdot1agCfmMepDbRMepIdentifier

Column	Syntax	OID
ostCfmRmepRowStatus Status of the row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7342.7.1.6.4.1.1
ostCfmRmepLocalMep This object is the local MEP associated with the explicit RMEP	IEEE8021-CFM-MIBDot1agCfmMepIdr/w Type Constraints: range: 1..8191	.1.3.6.1.4.1.7342.7.1.6.4.1.2
ostCfmRmepPortNumber The port number of the local MEP associated with the explicit RMEP	OMNITRON-TC-MIBOstPortListr/w	.1.3.6.1.4.1.7342.7.1.6.4.1.3