OMNITRON-EST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
168

ostEnetStInitCfgTable

table
.1.3.6.1.4.1.7342.10.1.1.2 · 1 row entry · 58 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostEnetStInitCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-EST-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-EST-MIB::ostEnetStInitCfgTable' 
This table supports the global EnetST initiator configurations.
ostEnetStInitCfgEntry row .1.3.6.1.4.1.7342.10.1.1.2.1
This is a EnetST Initiator configuration table entry.
Indexes
Column Syntax OID
ostEnetStInitCfgIndex
An index to the EnetST Initiator Configuration table which indicates
the specific test session for the module.

ostEnetStGlobalCfgInitSessionNextIndex needs to be inspected to find an
available index for r…
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.7342.10.1.1.2.1.1
ostEnetStInitCfgRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7342.10.1.1.2.1.2
ostEnetStInitCfgProfileName
Test Initiator profile name.

This object may not be modified after creation.
OMNITRON-TC-MIBOstProfileNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.2.1.3
ostEnetStInitCfgTestGenerator
This object specifies whether the Test Initiator function is
enabled for the test instance.

The value 'true' indicates the Test Initiator function is enabled
for the test instance.

The valu…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.2.1.4
ostEnetStInitCfgTestMonitor
This object specifies whether the Test Monitor function is
enabled for the test instance.

The value 'true' indicates the Test Monitor function is enabled
for the test instance.

The value 'f…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.2.1.5
ostEnetStInitCfgInService
This object specifies whether the Test In-Service function is
enabled for the test instance.

The value 'true' indicates the Test In-Service function is enabled
for the test instance. Normal customer traff…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.2.1.6
ostEnetStInitCfgPortNum
This object selects the initiating port number for the specific test
instance that is configured. The egress port the specific test
instance is configured via the ostEnetStInitCfgEgressPortNum object.

Thi…
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.1.2.1.7
ostEnetStInitCfgType
This object selects the specific type of Test Initiator instance.

port(1) Test instance is port based
evc(2) Test instance is EVC based
evccos(3) Test instance is EVC+CoS based
lbm(4) …
Enumerationr/w
Enumerated Values:
1port
2evc
3evccos
4lbm
5tst
 .1.3.6.1.4.1.7342.10.1.1.2.1.8
ostEnetStInitCfgEvc
This object defines which EVC the test instance is associated with.
It must be configured if ostEnetStInitCfgType is 'evc' or 'evccos'. It
is ignored for other test instance types.

This object can only be…
OMNITRON-TC-MIBOstEvcNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.2.1.9
ostEnetStInitCfgCosBwp
This object defines which Class of Service (CoS) or Bandwidth Profile
the test instance is associated with. It must be configured if
ostEnetStInitCfgType is 'evccos'. It is ignored for other test
instance types.
…
OMNITRON-TC-MIBOstCosNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.2.1.10
ostEnetStInitCfgVid
The test VID associated with this EVC on this interface. It must be
a member of the EVC selected by ostEnetStInitCfgEvc.

If defined, it is the value of VLAN ID that is used to generate the test
PDUs.
…
OMNITRON-TC-MIBOstVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.10.1.1.2.1.11
ostEnetStInitCfgPriority
This object specifies the test instance PCP value (tag priority) on
the generated test PDU.

It must be configured if ostEnetStInitCfgType 'evc' or 'evccos'
and if the EVC is a tagged type of data.
…
IEEE8021-TC-MIBIEEE8021PriorityValuer/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7342.10.1.1.2.1.12
ostEnetStInitCfgMdIndex
This object specifies the test instance maintenance domain index for
the generated test PDU.

The value is ignored for ostEnetStInitCfgType 'port', 'evc', or 'evccos'.

Is is mandatory to be …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.13
ostEnetStInitCfgMaIndex
This object specifies the test instance maintenance association index
for the generated test PDU.

The value is ignored for ostEnetStInitCfgType 'port', 'evc', or 'evccos'.

Is is mandatory t…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.14
ostEnetStInitCfgDestMacAddress
This object specifies the Destination MAC Address Field for
test instance PDUs.

If ostEnetStInitCfgType is 'port', 'evc', or 'evccos' the value
of the object is used as the Destination Address of the test…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7342.10.1.1.2.1.15
ostEnetStInitCfgDestIsMepId
This object indicates whether the destination MEP is identified via
its MEP ID or its MAC address.

If ostEnetStInitCfgType is 'port', 'evc', or 'evccos' the
value of this object is ignored.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.2.1.16
ostEnetStInitCfgDestMepId
The Maintenance End Point Identifier of another MEP in the same
Maintenance Association to which the test instance PDU is to be sent.

This MEP ID will be used if the value of the column
ostEnetStInitCfgDe…
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.7342.10.1.1.2.1.17
ostEnetStInitCfgFrameSize
This object defines which values of frame sizes to use during
a test instance.

This object can only be written at row creation time and cannot be
modified once it has been created.
OMNITRON-TC-MIBOstFrameSizeListr/w
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.7342.10.1.1.2.1.18
ostEnetStInitCfgFrameType
Deprecated. The value of this object is ignored
Enumerationr/w
Enumerated Values:
1l2
2cfm
 .1.3.6.1.4.1.7342.10.1.1.2.1.19
ostEnetStInitCfgFramePayload
This object selects the specific type of test instance frame
type.

zeros(1) Test instance frame payload is all zeros
ones(2) Test instance frame payload is all ones
prbs(3) Test instance …
Enumerationr/w
Enumerated Values:
1zeros
2ones
3prbs
4zerosCrc
5onesCrc
6prbsCrc
 .1.3.6.1.4.1.7342.10.1.1.2.1.20
ostEnetStInitCfgFrameTimeDurationType
This object selects the specific time duration that is indicated
by ostEnetStInitCfgFrameDuration for the test instance.
type.

framecount(1) Test instance duration type specified by number of
…
Enumerationr/w
Enumerated Values:
1framecount
2timecount
 .1.3.6.1.4.1.7342.10.1.1.2.1.21
ostEnetStInitCfgFrameDuration
This object specifies the duration of a test instance trial.

If ostEnetStInitCfgFrameTimeDurationType is 'framecount' the value of the
object indicates the number of frames to transmit for a trial.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.22
ostEnetStInitCfgFrameRateType
This object selects the specific frame rate that is indicated
by ostEnetStInitCfgFrameRate for the test instance.

bits(1) Test instance frame rate specified by bits per second
frames(2) …
Enumerationr/w
Enumerated Values:
1bits
2frames
3gap
4interface
5serviceRate
 .1.3.6.1.4.1.7342.10.1.1.2.1.23
ostEnetStInitCfgFrameRate
This object specifies the specific frame rate of a test instance.
This object is valid for the GMx family of products. It is undefined
for the XMx family of products.

If ostEnetStInitCfgFrameRateType is '…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.24
ostEnetStInitCfgTestType
This object selects the specific type of test instance.

loss(1) Test instance is RFC2544 Loss test
latency(2) Test instance is RFC2544 Latency test
throughput(3) Test instance is R…
Enumerationr/w
Enumerated Values:
1loss
2latency
3throughput
4backToBack
5y1564Service
 .1.3.6.1.4.1.7342.10.1.1.2.1.25
ostEnetStInitCfgAcceptableFrameLossType
This object selects the specific type of acceptable frame loss
before a trial failure is declared as indicated by
ostEnetStInitCfgAcceptableFrameLoss for the test instance.

framecount(1) Acceptable l…
Enumerationr/w
Enumerated Values:
1framecount
2frameratio
 .1.3.6.1.4.1.7342.10.1.1.2.1.26
ostEnetStInitCfgAcceptableFrameLoss
This object specifies the acceptable frame loss in a trial before
a trial failure is declared in a test instance.

If ostEnetStInitCfgAcceptableFrameLossType is 'framecount' the value of
the object indicat…
Unsigned32r/w
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.27
ostEnetStInitCfgTrialCount
This object specifies the number of trials to run for a specific
test instance for a specific iteration. An iteration is one test run
that runs for a specific time duration.

This object can only be writte…
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.7342.10.1.1.2.1.28
ostEnetStInitCfgStatClear
This object when written clears the statistic counters associated with
a specific test instance. When read the value always returns 'false'.

Writing this value does not change any items in the configurati…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.2.1.29
ostEnetStInitCfgEgressPortNum
This object selects the egress port number for the specific test
instance that is configured. The initiating port for the specific test
instance is configured via the ostEnetStInitCfgPortNum object. A value
of '0' for t…
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.1.2.1.30
ostEnetStInitCfgTestStatus
This object indicates the status of the currently indicated Test
Instance.

If a value of testInitializing(5) is written to the object the
test will be restarted, whether is has completed, is in process,
o…
OMNITRON-TC-MIBOstTestStatusTyper/w
Type Values:
1testNotStarted
2testInProcess
3testStopped
4testCompleted
5testInitializing
 .1.3.6.1.4.1.7342.10.1.1.2.1.31
ostEnetStInitCfgPacketSizeType
This object selects the type of packet to be used for calculating the
time between frame starts.

l1(1) Uses the frame size + preamble/start (8 bytes) + inter-packet
gap (12 bytes) to calcu…
Enumerationr/w
Enumerated Values:
1l1
2l2
3l3
 .1.3.6.1.4.1.7342.10.1.1.2.1.32
ostEnetStInitCfgFailureDecrementSize
This object contains the maximum resolution for ascertaining a passing
rate for a test.

If 'ostEnetStInitCfgSearchType' is 'fixed' and a test fails, the test
rate is decremented by the value of this objec…
percentUnsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.7342.10.1.1.2.1.33
ostEnetStInitCfgSearchType
This object selects the specific type of Test Initiator instance.

fixed(1) Test instance decrements based upon the value of
ostEnetStInitCfgFailureDecrementSize. When a test
…
Enumerationr/w
Enumerated Values:
1fixed
2binary
 .1.3.6.1.4.1.7342.10.1.1.2.1.34
ostEnetStInitCfgAcceptableFrameDelay
This object specifies the acceptable frame delay in a trial before
a trial failure is declared in a test instance.

This object is used for Y.1564 testing only.

If the max frame delay in a t…
microsecondsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.7342.10.1.1.2.1.35
ostEnetStInitCfgAcceptableIfdv
This object specifies the acceptable inter-frame delay in a trial before
a trial failure is declared in a test instance.

This object is used for Y.1564 testing only.

If the max inter-frame …
microsecondsUnsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.7342.10.1.1.2.1.36
ostEnetStInitCfgNameType
This object selects the packet name type for the associated Test
Instance, either CoS or BWP profile name.

cos(1) The ostEnetStInitCfgCosBwp object indicates the value
references a CoS name…
Enumerationr/w
Enumerated Values:
1cos
2bwp
 .1.3.6.1.4.1.7342.10.1.1.2.1.37
ostEnetStInitCfgVidTx
The VID associated with the Test PDUs for the Test Instance.

If the primary VID was selected it indicates the Primary VID used. If
the primary VID was not selected it indicates the VID used for Test
PDUs.…
OMNITRON-TC-MIBOstVlanId
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.10.1.1.2.1.38
ostEnetStInitCfgRemote
This object selects the specific type of remote protocol for the specific
Test Initiator instance.

none(1) Test instance is independent of loop up/down protocols
jdsu(2) Test instance is propr…
Enumerationr/w
Enumerated Values:
1none
2jdsu
5veex
6twamp
7twamplight
8iploop
 .1.3.6.1.4.1.7342.10.1.1.2.1.39
ostEnetStInitCfgDestIpAddress
This object indicates the destination IPv4 address of the specific
test instance for an L3 type of test.

A non-zero value for this object indicates that the Ethernet frame will
be a layer 3 (IP type) of f…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.10.1.1.2.1.40
ostEnetStInitCfgSrcIpAddress
This object indicates the source IPv4 address of the specific test
instance for an L3 type of test

A non-zero value for this object or ostEnetStInitCfgSrcIpAddressString
indicates that the Ethernet frame …
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.10.1.1.2.1.41
ostEnetStInitCfgDisableTimeStamp
This object selects whether the timestamp is added to the Data or Test
TLV.

noTimeStamp(1) Test frames do not include originating timestamp
addTimeStamp(2) Test frames do include originating timestamp
…
Enumerationr/w
Enumerated Values:
1noTimeStamp
2addTimeStamp
 .1.3.6.1.4.1.7342.10.1.1.2.1.42
ostEnetStInitCfgIngressPolicers
This object selects whether the ingress policers are used for generation
of test traffic.

noIngressPolicers(1) No ingress policers are used for traffic generation
useIngressPolicers(2) Ingress policers a…
Enumerationr/w
Enumerated Values:
1noIngressPolicers
2useIngressPolicers
 .1.3.6.1.4.1.7342.10.1.1.2.1.43
ostEnetStInitCfgY1564FullCir
This object selects whether the A.1 (full CIR) or A.2 (step CIR) test
is run. This is applicable to Y.1564 test only and is ignored for other
test types


fullCir(1) Selects Y.1564 A.1 t…
Enumerationr/w
Enumerated Values:
1fullCir
2stepCir
 .1.3.6.1.4.1.7342.10.1.1.2.1.44
ostEnetStInitCfgY1564Performance
This object selects whether the configuration tests A, B, and C are
run or whether the performance test A is run. This is applicable to
Y.1564 test only and is ignored for other test types.

y1564ConfigTes…
Enumerationr/w
Enumerated Values:
1y1564ConfigTest
2y1564PerformanceTest
 .1.3.6.1.4.1.7342.10.1.1.2.1.45
ostEnetStInitCfgY1564UseEir
This object selects whether the CIR test (Test A) uses CIR or EIR
when running the test. This allows the test to run and stay in
sync with other tests running of the bandwidth profile is EIR
only. If the bandwidth profi…
Enumerationr/w
Enumerated Values:
1y1564UseCir
2y1564UseEir
 .1.3.6.1.4.1.7342.10.1.1.2.1.46
ostEnetStInitCfgFrameRate64
This object specifies the specific frame rate of a test instance.

This object is used only for the XM5. It is undefined for the GMx
family of products.

If ostEnetStInitCfgFrameRateType is '…
OMNITRON-TC-MIBOstUnsigned64r/w .1.3.6.1.4.1.7342.10.1.1.2.1.47
ostEnetStInitCfgAvail
This object specifies the acceptable AVAIL (availability) in a trial
before a trial failure is declared in a test instance. If availablilty
drops below the configured value a trial failure will occur.

The…
milli-percentUnsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.10.1.1.2.1.48
ostEnetStInitCfgEthertype
This object specifies the test instance Ethertype that is used at the
start of the data portion of the frame at the VID TAG.

The value is ignored for ostEnetStInitCfgType 'mep', 'lbm', 'tst'.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.2.1.49
ostEnetStInitCfgDestIpAddressString
This object indicates the destination IPv4 or IPv6 address of the
specific test instance for an L3 type of test.

A non-zero value for this object indicates that the Ethernet frame will
be a layer 3 (IP ty…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.2.1.50
ostEnetStInitCfgSrcIpAddressString
This object indicates the source IPv4 or IPv6 address of the
specific test instance for an L3 type of test

A non-zero value for this object indicates that the Ethernet frame will
be a layer 3 (IP type) of…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.2.1.51
ostEnetStInitCfgUpPort
This object allows an egress port to be dynamically determined by
sending traffic out all the ports in an EVC instead of a specific
egress port (ostEnetStInitCfgEgressPortNum).

none(1) Egress port i…
Enumerationr/w
Enumerated Values:
1none
2evc
 .1.3.6.1.4.1.7342.10.1.1.2.1.52
ostEnetStInitCfgCtlIpAddressString
This object indicates the control IPv4 or IPv6 address of the
specific test instance for remote protocol type of test.

It is illegal to set this when the ostEnetStInitCfgType object is set
to 'mep', 'lbm'…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.2.1.53
ostEnetStInitCfgTwampServerPort
TWAMP server TCP port
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.10.1.1.2.1.54
ostEnetStInitCfgTwampUdpSrcPort
TWAMP or SFP-NID L3 PDU data or SFP-NID IP Loopback remote protocol
UDP source port. When used in a standard L3 loopback the transmitted
frame is a UDP L4 frame.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.10.1.1.2.1.55
ostEnetStInitCfgTwampUdpDstPort
TWAMP or SFP-NID L3 PDU data or SFP-NID IP Loopback remote protocol
UDP destination port. When used in a standard L3 loopback the
transmitted frame is a UDP L4 frame.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.10.1.1.2.1.56
ostEnetStInitCfgGatewayIpAddressString
This object indicates the gateway IPv4 or IPv6 address of the
specific test instance for remote protocol IP Loopback type of test
for the SFP-NID.

It is illegal to set this when the ostEnetStInitCfgType o…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.2.1.57
ostEnetStInitCfgNetworkAddressLength
This object configures the IPv4 subnet mask bit length (maximum size
of 28) or the IPv6 prefix bit length (maximum size of 128) for the
SFP-NID.

This object can only be written at row creation time and ca…
Unsigned32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.7342.10.1.1.2.1.58

ostEnetStCurrentStatsTable

table
.1.3.6.1.4.1.7342.10.1.1.3 · 1 row entry · 33 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostEnetStCurrentStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-EST-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-EST-MIB::ostEnetStCurrentStatsTable' 
This table supports the current statistics for EnetST initiators.
ostEnetStCurrentStatsEntry row .1.3.6.1.4.1.7342.10.1.1.3.1
This is a EnetST Initiator current statistics table entry.
Indexes
Column Syntax OID
ostEnetStCurrentStatsIndex
The index for the current test instance trial/iteration. This
value will become the value for ostEnetStHistoryStatsIndex
once the current trial/iteration is completed.

A specific test instance is composed…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.1
ostEnetStCurrentStatsStartTime
The time that the current test instance phase started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.7342.10.1.1.3.1.2
ostEnetStCurrentStatsElapsedTime
The time that the current test instance phase has been running, in 0.01
seconds.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.7342.10.1.1.3.1.3
ostEnetStCurrentStatsTrial
The value of the current test instance phase trial.

A test instance phase trial value starts at 1 and increments as each
subsequent trial is started.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.4
ostEnetStCurrentStatsIteration
The value of the current test instance phase iteration.

A test instance phase iteration value starts at 1 and increments as each
subsequent iteration is started. When ostEnetStCurrentStatsTrial
increments…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.5
ostEnetStCurrentStatsFrameSize
This object defines the value of the frame size for the current
test instance phase.

For the GM3, GM4, and GM4-PoE the maximum frame size is 10240 bytes.
For the XM5 the maximum frame size is 10056 bytes.
Unsigned32
Constraints:
range: 64-10240
 .1.3.6.1.4.1.7342.10.1.1.3.1.6
ostEnetStCurrentStatsTransmitRate
This object indicates the specific frame rate for the current
test instance phase.

This object is used only for the GMx family of products. It is
undefined for the XM5.

If ostEnetStInitCfgF…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.7
ostEnetStCurrentStatsFramesTransmitted
This object contains the number of test frames transmitted during
the specific test instance phase.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.3.1.8
ostEnetStCurrentStatsFramesReceived
This object contains the number of test frames received during
the specific test instance phase.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.3.1.9
ostEnetStCurrentStatsFrameDelayTwoWayMin
This object contains the minimum two-way frame delay
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.10
ostEnetStCurrentStatsFrameDelayTwoWayMax
This object contains the maximum two-way frame delay
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.11
ostEnetStCurrentStatsFrameDelayTwoWayAvg
This object contains the average two-way frame delay
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.12
ostEnetStCurrentStatsIfdvTwoWayMin
This object contains the minimum two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.13
ostEnetStCurrentStatsIfdvTwoWayMax
This object contains the maximum two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.14
ostEnetStCurrentStatsIfdvTwoWayAvg
This object contains the average two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.15
ostEnetStCurrentStatsReceiveErrors
This object specifies the number of test frames received during
the specific test instance phase that were determined to be in
error.

An error is counted if the frames are misordered, a frame is dropped,
…
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.3.1.16
ostEnetStCurrentStatsTestStatus
This object indicates whether the current test instance phase meets
the pass/fail criteria defined during the test instance configuration.

The value 'pass' indicates the current test instance phase status…
OMNITRON-TC-MIBOstTestResultType
Type Values:
1pass
2fail
3oversubscribe
 .1.3.6.1.4.1.7342.10.1.1.3.1.17
ostEnetStCurrentStatsInterfaceRate
This object specifies the specific bit rate of the physical interface for
the test instance. For instance a 100M physical port would have a value of
100,000,000.

This object is used only for the GMx famil…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.18
ostEnetStCurrentStatsLineRate
This object specifies the line rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size+20)*8. It is the bit
rate per frame size plus the preamble/start bits (8 octets)
and th…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.19
ostEnetStCurrentStatsDataRate
This object specifies the date rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size)*8.

This object is used only for the GMx family of products. It is
undef…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.20
ostEnetStCurrentStatsFrameRate
This object indicates the number of frames per second for the
specific test instance phase.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.21
ostEnetStCurrentStatsTransmitRate64
This object indicates the specific frame rate for the current
test instance phase.

This object is used only for the GMx family of products. It is
undefined for the XM5.

If ostEnetStInitCfgF…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.3.1.22
ostEnetStCurrentStatsInterfaceRate64
This object specifies the specific bit rate of the physical interface for
the test instance. For instance a 100M physical port would have a value of
100,000,000.

This object is used only for the XM5. It i…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.3.1.23
ostEnetStCurrentStatsLineRate64
This object specifies the line rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size+20)*8. It is the bit
rate per frame size plus the preamble/start bits (8 octets)
and th…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.3.1.24
ostEnetStCurrentStatsDataRate64
This object specifies the date rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size)*8.

This object is used only for the XM5. It is undefined for the GMx
fa…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.3.1.25
ostEnetStCurrentStatsAvail
This object specifies the availabilty of the specific test instance in
milli-percent, where 1 indicates 0.001 percent.

The percent value is expressed as a percent with a value of 0 (ratio
0.000%) through …
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.10.1.1.3.1.26
ostEnetStCurrentStatsUnavailCount
This object specifies the count of the number of unavailable seconds
for the specific test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.27
ostEnetStCurrentStatsDroppedCount
This object specifies the count of the number of dropped packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.28
ostEnetStCurrentStatsDuplicateCount
This object specifies the count of the number of duplicate packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.29
ostEnetStCurrentStatsOutOfOrderCount
This object specifies the count of the number of out-of-order packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.30
ostEnetStCurrentStatsMinTTL
This object specifies the minimum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.31
ostEnetStCurrentStatsMaxTTL
This object specifies the maximum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.32
ostEnetStCurrentStatsAvgTTL
This object specifies the average Time-To-Live (TTL) value
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.3.1.33

ostEnetStHistoryStatsTable

table
.1.3.6.1.4.1.7342.10.1.1.4 · 1 row entry · 33 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostEnetStHistoryStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-EST-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-EST-MIB::ostEnetStHistoryStatsTable' 
This table supports the history statistics for EnetST initiators.
ostEnetStHistoryStatsEntry row .1.3.6.1.4.1.7342.10.1.1.4.1
This is a EnetST Initiator history statistics table entry.
Indexes
Column Syntax OID
ostEnetStHistoryStatsIndex
The index for the history test instance trial/iteration for a completed
test instance phase.

A specific test instance is composed of a number of Test Instance
Phases, which corresponds to one row in this …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.1
ostEnetStHistoryStatsEndTime
The time that the test instance phase completed.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.7342.10.1.1.4.1.2
ostEnetStHistoryStatsElapsedTime
The time that the test instance phase ran for, in 0.01
seconds.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.7342.10.1.1.4.1.3
ostEnetStHistoryStatsTrial
The value of the test instance phase trial.

A test instance phase trial value starts at 1 and increments as each
subsequent trial is started.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.4
ostEnetStHistoryStatsIteration
The value of the test instance phase iteration.

A test instance phase iteration value starts at 1 and increments as each
subsequent iteration is started. When ostEnetStHistoryStatsTrial
increments to a ne…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.5
ostEnetStHistoryStatsFrameSize
This object defines the value of the frame size for the
test instance phase.

For the GM3, GM4, and GM4-PoE the maximum frame size is 10240 bytes.
For the XM5 the maximum frame size is 10056 bytes.
Unsigned32
Constraints:
range: 64-10240
 .1.3.6.1.4.1.7342.10.1.1.4.1.6
ostEnetStHistoryStatsTransmitRate
This object indicates the specific frame rate for the
test instance phase.

This object is used only for the GMx family of products. It is
undefined for the XM5.

If ostEnetStInitCfgFrameRate…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.7
ostEnetStHistoryStatsFramesTransmitted
This object contains the number of test frames transmitted during
the specific test instance phase.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.4.1.8
ostEnetStHistoryStatsFramesReceived
This object contains the number of test frames received during
the specific test instance phase.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.4.1.9
ostEnetStHistoryStatsFrameDelayTwoWayMin
This object contains the minimum two-way frame delay
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.10
ostEnetStHistoryStatsFrameDelayTwoWayMax
This object contains the maximum two-way frame delay
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.11
ostEnetStHistoryStatsFrameDelayTwoWayAvg
This object contains the average two-way frame delay
calculated during the specific test instance phase.

This object value is ignored if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.12
ostEnetStHistoryStatsIfdvTwoWayMin
This object contains the minimum two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.13
ostEnetStHistoryStatsIfdvTwoWayMax
This object contains the maximum two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.14
ostEnetStHistoryStatsIfdvTwoWayAvg
This object contains the average two-way IFDV
calculated during the specific test instance phase.

This object value is undefined if ostEnetStInitCfgTestType is 'loss'.
nanosecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.15
ostEnetStHistoryStatsReceiveErrors
This object specifies the number of test frames received during
the specific test instance phase that were determined to be in
error.

An error is counted if the frames are misordered, a frame is dropped,
…
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.4.1.16
ostEnetStHistoryStatsTestStatus
This object indicates whether the test instance phase meets
the pass/fail criteria defined during the test instance configuration.

The value 'pass' indicates the test instance phase status
is 'passed'.
…
OMNITRON-TC-MIBOstTestResultType
Type Values:
1pass
2fail
3oversubscribe
 .1.3.6.1.4.1.7342.10.1.1.4.1.17
ostEnetStHistoryStatsInterfaceRate
This object specifies the specific bit rate of the physical interface for
the test instance. For instance a 100M physical port would have a value of
100,000,000.

This object is used only for the GMx famil…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.18
ostEnetStHistoryStatsLineRate
This object specifies the line rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size+20)*8. It is the bit
rate per frame size plus the preamble/start bits (8 octets)
and th…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.19
ostEnetStHistoryStatsDataRate
This object specifies the date rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size)*8.

This object is used only for the GMx family of products. It is
undef…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.20
ostEnetStHistoryStatsFrameRate
This object indicates the number of frames per second for the
specific test instance phase.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.21
ostEnetStHistoryStatsTransmitRate64
This object indicates the specific frame rate for the
test instance phase.

This object is used only for the XM5. It is undefined for the GMx
family of products.

If ostEnetStInitCfgFrameRate…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.4.1.22
ostEnetStHistoryStatsInterfaceRate64
This object specifies the specific bit rate of the physical interface for
the test instance. For instance a 100M physical port would have a value of
100,000,000.

This object is used only for the XM5. It i…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.4.1.23
ostEnetStHistoryStatsLineRate64
This object specifies the line rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size+20)*8. It is the bit
rate per frame size plus the preamble/start bits (8 octets)
and th…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.4.1.24
ostEnetStHistoryStatsDataRate64
This object specifies the date rate of the specific test instance in bits
per second. It is calculated by: (Frame Rate)*(Frame Size)*8.

This object is used only for the XM5. It is undefined for the GMx
fa…
OMNITRON-TC-MIBOstUnsigned64 .1.3.6.1.4.1.7342.10.1.1.4.1.25
ostEnetStHistoryStatsAvail
This object specifies the availabilty of the specific test instance in
milli-percent, where 1 indicates 0.001 percent.

The percent value is expressed as a percent with a value of 0 (ratio
0.000%) through …
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.10.1.1.4.1.26
ostEnetStHistoryStatsUnavailCount
This object specifies the count of the number of unavailable seconds
for the specific test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.27
ostEnetStHistoryStatsDroppedCount
This object specifies the count of the number of dropped packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.28
ostEnetStHistoryStatsDuplicateCount
This object specifies the count of the number of duplicate packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.29
ostEnetStHistoryStatsOutOfOrderCount
This object specifies the count of the number of out-of-order packets
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.30
ostEnetStHistoryStatsMinTTL
This object specifies the minimum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.31
ostEnetStHistoryStatsMaxTTL
This object specifies the maximum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.32
ostEnetStHistoryStatsAvgTTL
This object specifies the average Time-To-Live (TTL) value
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.4.1.33

ostEnetStRespCfgTable

table
.1.3.6.1.4.1.7342.10.1.1.5 · 1 row entry · 37 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostEnetStRespCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-EST-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-EST-MIB::ostEnetStRespCfgTable' 
This table supports the global EnetST responder configurations.
ostEnetStRespCfgEntry row .1.3.6.1.4.1.7342.10.1.1.5.1
This is a EnetST Responder configuration table entry.
Indexes
Column Syntax OID
ostEnetStRespCfgIndex
An index to the EnetST Responder Configuration table which indicates
the specific test session for the module.

ostEnetStGlobalCfgRespSessionNextIndex needs to be inspected to find an
available index for r…
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.7342.10.1.1.5.1.1
ostEnetStRespCfgRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7342.10.1.1.5.1.2
ostEnetStRespCfgProfileName
Test Responder profile name.

This object may not be modified after creation.
OMNITRON-TC-MIBOstProfileNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.5.1.3
ostEnetStRespCfgReflector
This object specifies whether the Test Reflector function is
enabled for the test response.

The value 'true' indicates the Test Reflector function is enabled
for the test responder.

The val…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.4
ostEnetStRespCfgTestMonitor
This object specifies whether the Test Monitor function is
enabled for the test instance.

The value 'true' indicates the Test Monitor function is enabled
for the test instance.

The value 'f…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.5
ostEnetStRespCfgInService
This object specifies whether the Test In-Service function is
enabled for the test instance.

The value 'true' indicates the Test In-Service function is enabled
for the test instance. Normal customer traff…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.6
ostEnetStRespCfgPortNum
This object selects the port number for the specific test
responder that is configured.

This object can only be written at row creation time and cannot be
modified once it has been created.
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.1.5.1.7
ostEnetStRespCfgType
This object selects the specific type of Test Responder instance.

port(1) Test responder is port based
evc(2) Test instance is EVC based
evccos(3) Test instance is EVC+CoS based
lbm(4) …
Enumerationr/w
Enumerated Values:
1port
2evc
3evccos
4lbm
5tst
 .1.3.6.1.4.1.7342.10.1.1.5.1.8
ostEnetStRespCfgEvc
This object defines which EVC the test responder is associated with.
It must be configured if ostEnetStRespCfgType is 'evc' or 'evccos'. It
is ignored for other test responder types.

This object can only …
OMNITRON-TC-MIBOstEvcNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.5.1.9
ostEnetStRespCfgCos
This object defines which Class of Service (CoS) the test responder
is associated with. It must be configured if ostEnetStRespCfgType is
'evccos'. It is ignored for other test instance types.

This object …
OMNITRON-TC-MIBOstCosNameStringr/w
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.10.1.1.5.1.10
ostEnetStRespCfgMdIndex
This object specifies the test responder maintenance domain index for
the generated test PDU.

The value is ignored for ostEnetStRespCfgType 'port', 'evc', or 'evccos'.

Is is mandatory to be…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.11
ostEnetStRespCfgMaIndex
This object specifies the test responder maintenance association index
for the generated test PDU.

The value is ignored for ostEnetStRespCfgType 'port', 'evc', or 'evccos'.

Is is mandatory …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.12
ostEnetStRespCfgSourceMacAddress
This object specifies a valid Source MAC Address Field of the received
test PDUs if the value is non-zero.

If ostEnetStRespCfgType is 'port', 'evc', or 'evccos' the value
of the object is used as a valid …
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7342.10.1.1.5.1.13
ostEnetStRespCfgSourceIsMepId
This object indicates whether the source MEP of the received test PDU
is identified via its MEP ID or its MAC address.

If ostEnetStRespCfgType is 'port', 'evc', or 'evccos' the
value of this object is ign…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.14
ostEnetStRespCfgSourceMepId
The Maintenance End Point Identifier of another MEP in the same
Maintenance Association to which the test instance PDU is from.

This MEP ID will be used to validate the source MEP ID of the test
instance …
IEEE8021-CFM-MIBDot1agCfmMepIdOrZeror/w
Type Constraints:
range: 0..8191
 .1.3.6.1.4.1.7342.10.1.1.5.1.15
ostEnetStRespCfgFrameType
Deprecated. The value of this object is ignored
Enumerationr/w
Enumerated Values:
1l2
2cfm
 .1.3.6.1.4.1.7342.10.1.1.5.1.16
ostEnetStRespCfgReplyType
This object selects the specific type of test response.

loop(1) Test responder MAC DA/SA is unchanged (no swap), L1
macswap(2) Test responder MAC DA/SA is swapped, L2
l3(3) …
Enumerationr/w
Enumerated Values:
1loop
2macswap
3l3
 .1.3.6.1.4.1.7342.10.1.1.5.1.17
ostEnetStRespCfgStatClear
This object when written clears the statistic counters associated with
a specific test responder. When read the value always returns 'false'.

Writing this value does not change any items in the configurat…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.18
ostEnetStRespCfgEgressPortNum
This object selects the egress port number for the specific test
instance that is configured. The responding port for the specific test
instance is configured via the ostEnetStRespCfgPortNum object. A value
of '0' for t…
OMNITRON-TC-MIBOstPortNumberr/w
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.10.1.1.5.1.19
ostEnetStRespCfgTestStatus
This object indicates the status of the currently indicated Test
Instance.
OMNITRON-TC-MIBOstTestStatusType
Type Values:
1testNotStarted
2testInProcess
3testStopped
4testCompleted
5testInitializing
 .1.3.6.1.4.1.7342.10.1.1.5.1.20
ostEnetStRespCfgVid
The test VID associated with this EVC on this interface. It must be
a member of the EVC selected by ostEnetStRespCfgEvc.

If defined, it is the value of VLAN ID that is used to generate the
response test P…
OMNITRON-TC-MIBOstVlanIdr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.10.1.1.5.1.21
ostEnetStRespCfgLocalMac
This object indicates whether the received test instance PDU must match
the local port's MAC address.

The value 'true' indicates the test PDU must match the test instance's
local port MAC address if ostEn…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.22
ostEnetStRespCfgMulticast
This object indicates that a received test PDU with a destination
address that is multicast or broadcast will be responded to and
replaced with the local test instance's MAC address if a MAC swap
test instance operation…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.23
ostEnetStRespCfgVidRx
The VLAN ID associated with the Test PDUs for the Test Instance.

A value of '0' indicates that Test PDUs are untagged or the instance
is port based.
OMNITRON-TC-MIBOstVlanId
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.10.1.1.5.1.24
ostEnetStRespCfgRemote
This object selects the specific type of remote protocol for the specific
Test Responder instance.

none(1) Test response is independent of loop up/down protocols
jdsu(2) Test response is propr…
Enumerationr/w
Enumerated Values:
1none
2jdsu
5veex
6twamp
7twamplight
8iploop
 .1.3.6.1.4.1.7342.10.1.1.5.1.25
ostEnetStRespCfgDestIpAddress
This object indicates the destination IPv4 address of the specific test
instance.

A non-zero value for this object or ostEnetStRespCfgDestIpAddressString
indicates that the matching Ethernet frame will be…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.10.1.1.5.1.26
ostEnetStRespCfgSrcIpAddress
This object indicates the source IPv4 address of the specific test
instance for an L3 type of test

A non-zero value for this object or ostEnetStRespCfgSrcIpAddressString
indicates that the matching Ethern…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.10.1.1.5.1.27
ostEnetStRespCfgEthertype
This object specifies the test instance Ethertype that is used at the
start of the data portion of the frame at the VID TAG.

The value is ignored for ostEnetStRespCfgType 'mep', 'lbm', 'tst'.
…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.28
ostEnetStRespCfgDestIpAddressString
This object indicates the destination IPv4 or IPv6 address of the
specific test instance.

A non-zero value for this object indicates that the matching Ethernet
frame will be a layer 3 (IP type) of frame. …
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.5.1.29
ostEnetStRespCfgSrcIpAddressString
This object indicates the source IPv4 or IPv6 address of the
specific test instance for an L3 type of test

A non-zero value for this object indicates that the matching Ethernet
frame will be a layer 3 (IP…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.5.1.30
ostEnetStRespCfgUpPort
This object allows an egress port to be dynamically determined by
sending traffic out all the ports in an EVC instead of a specific
egress port (ostEnetStRespCfgEgressPortNum).

none(1) Egress port i…
Enumerationr/w
Enumerated Values:
1none
2evc
 .1.3.6.1.4.1.7342.10.1.1.5.1.31
ostEnetStRespCfgPersist
This object specifies whether the Test Responder instance is enabled
to be saved (persistent) when a save command occurs.

The value 'true' indicates the Test Responder instance is enabled
to be saved.
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7342.10.1.1.5.1.32
ostEnetStRespCfgTwampServerPort
TWAMP server TCP port
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.33
ostEnetStRespCfgTwampUdpSrcPort
TWAMP UDP source port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.34
ostEnetStRespCfgTwampUdpDstPort
TWAMP UDP destination port.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.5.1.35
ostEnetStRespCfgGatewayIpAddressString
This object indicates the gateway IPv4 or IPv6 address of the
specific test instance for remote protocol IP Loopback type of test
for the SFP-NID.

It is illegal to set this when the ostEnetStInitCfgType o…
OMNITRON-TC-MIBOstIpAddrr/w
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.10.1.1.5.1.36
ostEnetStRespCfgNetworkAddressLength
This object configures the IPv4 subnet mask bit length (maximum size
of 28) or the IPv6 prefix bit length (maximum size of 128) for the
SFP-NID.

This object can only be written at row creation time and ca…
Unsigned32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.7342.10.1.1.5.1.37

ostEnetStRespStatsTable

table
.1.3.6.1.4.1.7342.10.1.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the omnitron variant from /opt/observium/mibs/omnitron.
Command help
Walk ostEnetStRespStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'OMNITRON-EST-MIB' -M '/opt/observium/mibs/omnitron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OMNITRON-EST-MIB::ostEnetStRespStatsTable' 
This table supports the statistics for EnetST responder.
ostEnetStRespStatsEntry row .1.3.6.1.4.1.7342.10.1.1.6.1
This is a EnetST Responder statistics table entry.
Indexes
Column Syntax OID
ostEnetStRespStatsStartTime
The time that the test responder instance started.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.7342.10.1.1.6.1.1
ostEnetStRespStatsElapsedTime
The time that the test responder instance has been running, in 0.01
seconds.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.7342.10.1.1.6.1.2
ostEnetStRespStatsFramesTransmitted
This object contains the number of test frames transmitted during
the specific test response instance.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.6.1.3
ostEnetStRespStatsFramesReceived
This object contains the number of test frames received during
the specific test response instance.
OMNITRON-TC-MIBOstFrameCount64 .1.3.6.1.4.1.7342.10.1.1.6.1.4
ostEnetStRespStatsMinTTL
This object specifies the minimum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.6.1.5
ostEnetStRespStatsMaxTTL
This object specifies the maximum Time-To-Live (TTL) value received
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.6.1.6
ostEnetStRespStatsAvgTTL
This object specifies the average Time-To-Live (TTL) value
for the specific TWAMP test instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.10.1.1.6.1.7