NTWS-AP-TC

        Textual Conventions used by Nortel Networks wireless switches.
        
AP = Access Point;
AC = Access Controller (wireless switch),
     the device that runs a SNMP Agent using these TCs.
        
Copyright 2009 Nortel Networks.
All rights reserved.
This Nortel Networks SNMP Management Information Base Specification
(Specification) embodies Nortel Networks' confidential and
proprietary intellectual property.
        
This Specification is supplied 'AS IS' and Nortel Networks
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification.
    
Source file
NTWS-AP-TC
Last revised
Identity
ntwsApTc
Base OID
1.3.6.1.4.1.45.6.1.4.3
Imported Objects
NTWS-ROOT-MIB ntwsMibs
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the nortel MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'NTWS-AP-TC' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'NTWS-AP-TC::ntwsApTc'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NTWS-AP-TC' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NTWS-AP-TC::ntwsApTc'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (1)
.1.3.6.1.4.1.45.6.1.4.3
Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. NTWS-ROOT-MIBnortel
  3. SNMPv2-TCrfc
  4. NTWS-AP-TCnortelselected
Type Definitions (33)
Enumeration
ap(1)
dap(2)
wired(3)
Enumeration
directAttach(1)
networkAttach(2)
Enumeration
high(1)
low(2)
sticky(3)
Enumeration
secure(1)
insecure(2)
auto(3)
Enumeration
secureHandshakeFailure(2)
fingerprintRequired(3)
fingerprintMismatch(4)
portLinkUp(11)
portLinkDown(12)
normalTransition(91)
failUnknown(99)
OctetString range: 0range: 16
Enumeration
auto(1)
static(2)
off(3)
Unsigned32 range: 0..9999
Unsigned32 range: 0..1000
Enumeration
auto(1)
high(2)
Unsigned32 range: 1..4294967295
Unsigned32 range: 0..4294967295
OctetString range: 0..32
Enumeration
fullService(1)
noService(2)
degradedService(3)
Enumeration
cleared(1)
init(2)
bootStarted(3)
imageDownloaded(4)
connectFailed(5)
configuring(6)
configured(7)
Enumeration
clear(1)
timeout(2)
reset(3)
bootSuccess(4)
startConfiguring(5)
connectFail(6)
Enumeration
oper(1)
nonOper(2)
Enumeration
util-index(1)
rexmit-pkt-offset(2)
noise-offset(3)
noise(4)
utilization(5)
phy-error-offset(6)
crc-errors-offset(7)
radar-detected(8)
Unsigned32 range: 1..1024
Enumeration
other(1)
clear(2)
wep(3)
wep40(4)
wep104(5)
tkip(6)
aesCcmp(7)
Unsigned32
Enumeration
indoors(1)
outdoors(2)
Enumeration
channelWidth20MHz(1)
channelWidth40MHz(2)
Enumeration
configInit(1)
configFail(2)
configOk(3)
Enumeration
enabled(1)
disabled(2)
Enumeration
mimoOther(1)
mimo1x1(2)
mimo2x3(3)
mimo3x3(4)
Enumeration
enabled(1)
disabled(2)
sentry(3)
Enumeration
radio-1(1)
radio-2(2)
not-applicable(3)
Enumeration
dup-pkts-threshold-exceed(1)
retransmit-threshold-exceed(2)
clients-optimal-performance-reached(3)
def-power-threshold-exceed(4)
Unsigned32 range: 0range: 10..540
Enumeration
rateUnknown(1)
rate1(2)
rate2(3)
rate5-5(4)
rate6(5)
rate9(6)
rate11(7)
rate12(8)
rate18(9)
rate24(10)
rate36(11)
rate48(12)
rate54(13)
rateMCS0(20)
rateMCS1(21)
rateMCS2(22)
rateMCS3(23)
rateMCS4(24)
rateMCS5(25)
rateMCS6(26)
rateMCS7(27)
rateMCS8(28)
rateMCS9(29)
rateMCS10(30)
rateMCS11(31)
rateMCS12(32)
rateMCS13(33)
rateMCS14(34)
rateMCS15(35)
Enumeration
typeUnknown(1)
typeA(2)
typeB(3)
typeG(4)
typeNA(5)
typeNG(6)
Integer32 range: -100..0