NTN-QOS-POLICY-EVOL-PIB Table View

Interface type definitions. This class describes the types
of interfaces that exist on the device. An interface type
is denoted by its designated role identifier.

ntnQosInterfaceTypeEntry row .1.3.6.1.4.1.45.4.7.1.1.1

An instance of this class describes the characteristics
of a type of an interface. Interface type characteristics
include a role combination identifier, an interface class
designation and a filter capabilities attribute…

Indexes

ntnQosInterfaceTypeId

Column	Syntax	OID
ntnQosInterfaceTypeId An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceType class. Class instances may not be contiguous.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.1.1.1
ntnQosInterfaceTypeRoles The role combination that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifiers are used within a number of classes to logical…	POLICY-FRAMEWORK-PIBRoleCombinationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.4.7.1.1.1.2
ntnQosInterfaceTypeIfClass A value describing the overall classification of traffic received on interfaces with the given role combination. Traffic received on trusted interfaces may be processed differently and be subject to different restricti…	Enumerationr/w Enumerated Values: 1 absoluteValue 2 deltaValue 3 rateOfIncreaseExponentXIfSpeed	.1.3.6.1.4.1.45.4.7.1.1.1.3
ntnQosInterfaceTypeCapabilities An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP.	Bitsr/w Enumerated Values: 1 rising 2 falling	.1.3.6.1.4.1.45.4.7.1.1.1.4
ntnQosInterfaceTypeStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Constraints: range: -2147483648-2147483647 Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.1.1.5
ntnQosInterfaceTypeStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Constraints: range: -2147483648-2147483647 Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.1.1.6

Supports the assignment of 802.1p user priority 
values to a queue for each interface with a specific 
queue set. There will be 8 instances of this class 
for each supported queue set.

ntnQosQsetPriAssignmentEntry row .1.3.6.1.4.1.45.4.7.1.2.1

An instance of the ntnQosQsetPriAssignment class.

Indexes

ntnQosQsetPriAssignmentId

Column	Syntax	OID
ntnQosQsetPriAssignmentId An index that is used to uniquely identify the instance of the ntnQosQsetPriAssignment class.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.2.1.1
ntnQosQsetPriAssignmentQset The queue set with which an interface must be configured to support the Pri-to-queue assignment described by this instance. The specified queue set must be defined in the ntnQosIfQueueTable prior to being referenced b…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.2.1.2
ntnQosQsetPriAssignmentPri The 802.1p user priority to which this class instance applies.	QosIeee802Cosr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.45.4.7.1.2.1.3
ntnQosQsetPriAssignmentQueue The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetPriAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetPriAs…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.45.4.7.1.2.1.4
ntnQosQsetPriAssignmentStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Enumerated Values: 1 up 2 down Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.2.1.5
ntnQosQsetPriAssignmentStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.2.1.6

Supports the assignment of DSCP values to 
a queue for each interface with a specific 
queue set. There will be 64 instances of this 
class for each supported queue set.

ntnQosQsetDscpAssignmentEntry row .1.3.6.1.4.1.45.4.7.1.3.1

An instance of the ntnQosQsetDscpAssignment class.

Indexes

IF-MIBifIndex ntnQosQsetDscpAssignmentId QTECH-NMS-IF-THRESHOLD-MIBnmsifthIfThresholdFiredTemplate

Column	Syntax	OID
ntnQosQsetDscpAssignmentId An index that is used to uniquely identify the instance of the ntnQosQsetDscpAssignment class.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.3.1.1
ntnQosQsetDscpAssignmentQset The queue set with which an interface must be configured to support the Dscp-to-queue assignment described by this instance. The specified queue set must be defined in the ntnQosIfQueueTable prior to being referenced …	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.3.1.2
ntnQosQsetDscpAssignmentDscp The DSCP value to which this class instance applies.	DIFFSERV-DSCP-TCDscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.45.4.7.1.3.1.3
ntnQosQsetDscpAssignmentQueue The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetDscpAssignmentRoles tag, on which traffic with the specified user priority, dictated by the ntnQosQsetDscp…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.45.4.7.1.3.1.4
ntnQosQsetDscpAssignmentStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.3.1.5
ntnQosQsetDscpAssignmentStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.3.1.6

Supports the definition of shaping parameters
that can be applied to individual flows. Shaping
criteria is associated with a flow using the
qosTargetShaper attribute of the qosTarget class.

ntnQosShapingParamsEntry row .1.3.6.1.4.1.45.4.7.1.4.1

An instance of the ntnQosShapingParams class.

Indexes

ntnQosShapingParamsId

Column	Syntax	OID
ntnQosShapingParamsId An index that is used to uniquely identify the instance of the ntnQosShapingParams class.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.4.1.1
ntnQosShapingParamsRate The maximum rate, in kilobits per second, at which traffic shaped using this rate criteria will be transmitted over a given period of time. Transmitted traffic may exceed this rate for short periods in accordance with …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.45.4.7.1.4.1.2
ntnQosShapingParamsBurstSize The maximum traffic burst size, in bytes, that can be transmitted without experiencing a shaping delay. Typically, this value represents the maximum number of tokens in a token bucket. Note that the value…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.4.1.3
ntnQosShapingParamsQueueSize The amount of traffic, in packets, that may exceed the maximum burst size and still be queued for transmission. This value specifies the size of a shaping queue that holds a flow's traffic that is being delayed for sha…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.4.1.4
ntnQosShapingParamsStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.4.1.5
ntnQosShapingParamsStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.4.1.6
ntnQosShapingParamsLabel A label used to reference the entry in a textual manner.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.4.1.7

A table of IP Multi-Field Classifier filter 
entries that a system may use to identify IP 
traffic.

ntnDsMultiFieldClfrEntry row .1.3.6.1.4.1.45.4.7.1.5.2.1

An IP Multi-Field Classifier entry describes
a single filter.

Indexes

ntnDsMultiFieldClfrId

Column	Syntax	OID
ntnDsMultiFieldClfrId An index that enumerates the Multi-Field Classifier filter entries. Managers obtain new values for row creation in this table by reading ntnDsMultiFieldClfrNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.5.2.1.1
ntnDsMultiFieldClfrAddrType The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefor…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.45.4.7.1.5.2.1.2
ntnDsMultiFieldClfrDstAddr The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant.…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.4.7.1.5.2.1.3
ntnDsMultiFieldClfrDstPrefixLength The length of the CIDR Prefix carried in ntnDsMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between…	bitsINET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.45.4.7.1.5.2.1.4
ntnDsMultiFieldClfrSrcAddr The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant. …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.4.7.1.5.2.1.5
ntnDsMultiFieldClfrSrcPrefixLength The length of the CIDR Prefix carried in ntnDsMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between …	bitsINET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.45.4.7.1.5.2.1.6
ntnDsMultiFieldClfrDscp The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match. Version 1/…	DIFFSERV-DSCP-TCDscpOrAnyr/w Type Constraints: range: -1..63	.1.3.6.1.4.1.45.4.7.1.5.2.1.7
ntnDsMultiFieldClfrFlowId The flow identifier in an IPv6 header. Version 1/2 attribute.	FlowIdOrAnyr/w Type Constraints: range: -1..1048575	.1.3.6.1.4.1.45.4.7.1.5.2.1.8
ntnDsMultiFieldClfrProtocol The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.45.4.7.1.5.2.1.9
ntnDsMultiFieldClfrDstL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.45.4.7.1.5.2.1.10
ntnDsMultiFieldClfrDstL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnDsMult…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.45.4.7.1.5.2.1.11
ntnDsMultiFieldClfrSrcL4PortMin The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2 attribute.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.45.4.7.1.5.2.1.12
ntnDsMultiFieldClfrSrcL4PortMax The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in ntnDsMultiFie…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.45.4.7.1.5.2.1.13
ntnDsMultiFieldClfrStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.5.2.1.14
ntnDsMultiFieldClfrStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.5.2.1.15
ntnDsMultiFieldClfrLabel A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.5.2.1.16
ntnDsMultiFieldClfrSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.2.1.17
ntnDsMultiFieldClfrVersion Version indicator for ntnDsMultiFieldClfrTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.5.2.1.18
ntnDsMultiFieldClfrIpFlags Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv4 packets with the specified flag set in the header will match this classifier. …	Bitsr/w	.1.3.6.1.4.1.45.4.7.1.5.2.1.19
ntnDsMultiFieldClfrTcpCtrlFlags Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag is set in this attribute, TCP packets with the specified flag set in the header will ma…	Bitsr/w	.1.3.6.1.4.1.45.4.7.1.5.2.1.20
ntnDsMultiFieldClfrIpv4Options This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when looking for a match for this classifier entry. A value of 'ipv4OptionsPresen…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.2.1.21

IEEE 802-based classifier definitions. A 
class that contains attributes of IEEE 802 
(e.g., 802.3) traffic that form an association 
that is used to perform traffic classification.

ntnL2MultiFieldClfrEntry row .1.3.6.1.4.1.45.4.7.1.5.4.1

IEEE 802-based classifier definitions. An entry
specifies (potentially) several distinct matching
components. Each component is tested against the
data in a frame individually. An overall match
occurs when all of th…

Indexes

ntnL2MultiFieldClfrId

Column	Syntax	OID
ntnL2MultiFieldClfrId An arbitrary integer index that uniquely identifies this 802 classifier among all of the 802 classifiers. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.5.4.1.1
ntnL2MultiFieldClfrDstAddr The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into account address wildcarding as specified …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.4.7.1.5.4.1.2
ntnL2MultiFieldClfrDstAddrMask This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the ntnL2MultiFieldClfrDstAddr object. The va…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.4.7.1.5.4.1.3
ntnL2MultiFieldClfrSrcAddr The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, taking into account address wildcarding a…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.4.7.1.5.4.1.4
ntnL2MultiFieldClfrSrcAddrMask This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnL2MultiFieldClfrSrcAddr object. The…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.45.4.7.1.5.4.1.5
ntnL2MultiFieldClfrVlanIdMin The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMin value must be less than or equal to the ntnL2MultiFieldC…	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.45.4.7.1.5.4.1.6
ntnL2MultiFieldClfrVlanIdMax The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMax value must be greater than or equal to the ntnL2MultiFie…	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.45.4.7.1.5.4.1.7
ntnL2MultiFieldClfrVlanTag This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only frames received untagged will match this c…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.8
ntnL2MultiFieldClfrEtherType This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.45.4.7.1.5.4.1.9
ntnL2MultiFieldClfrUserPriority The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data …	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.10
ntnL2MultiFieldClfrStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.5.4.1.11
ntnL2MultiFieldClfrStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.5.4.1.12
ntnL2MultiFieldClfrLabel A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.5.4.1.13
ntnL2MultiFieldClfrSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.4.1.14
ntnL2MultiFieldClfrVersion Version indicator for ntnL2MultiFieldClfrTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.5.4.1.15
ntnL2MultiFieldClfrPktType This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethernetII(1)' indicates that only Ethernet II format frames will match this …	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.16
ntnL2MultiFieldClfrIvidMin The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMin value must be less than or equal to the ntnL…	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.45.4.7.1.5.4.1.17
ntnL2MultiFieldClfrIvidMax The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMax value must be greater than or equal to the n…	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.45.4.7.1.5.4.1.18
ntnL2MultiFieldClfrTPID This object specifies the value that will be compared against the value contained in the Ethertype field of the outer tag of a single or a double tagged (802.1ad QinQ) packet. Setting the ntnL2MultiFie…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.45.4.7.1.5.4.1.19
ntnL2MultiFieldClfrCFI This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only tagged frames with the CFI bit set to zero w…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.20
ntnL2MultiFieldClfrITPID This object specifies the value that will be compared against the value contained in the Ethertype field of the inner tag of a double tagged (802.1ad QinQ) packet. Setting the ntnL2MultiFieldClfrITPID …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.45.4.7.1.5.4.1.21
ntnL2MultiFieldClfrICFI This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only double tagged frames with the CFI bit set to…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.22
ntnL2MultiFieldClfrIUserPriority The 802.1p user priority value against which the value contained in the user priority field of the inner tag of a double tagged 802.1 frame is compared. A test for equality is performed when determining if a match e…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.4.1.23

The System Classifier Table defines 
classification data that is platform or 
hardware specific.

ntnSystemClfrEntry row .1.3.6.1.4.1.45.4.7.1.5.6.1

An entry in the System Classifier Table
describes classification data that is
specifically related to system or hardware
capabilities. As such, support for this
table or for individual attributes
contained in the t…

Indexes

ntnSystemClfrId

Column	Syntax	OID
ntnSystemClfrId An index that enumerates the system classifier entries. Managers can obtain new index values for row creation in this table by reading ntnSystemClfrNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.5.6.1.1
ntnSystemClfrUnknownUcastFrames If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.2
ntnSystemClfrUnknownMcastFrames If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.3
ntnSystemClfrKnownUcastFrames If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.4
ntnSystemClfrKnownMcastFrames If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.5
ntnSystemClfrBcastFrames If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. Ve…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.6
ntnSystemClfrPatternPosition Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes. This object and the ntnSystemClfrPatternData object sp…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.45.4.7.1.5.6.1.7
ntnSystemClfrPatternData Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes. This object and the ntnSystemClfrPatternPosition objec…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.45.4.7.1.5.6.1.8
ntnSystemClfrStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.5.6.1.9
ntnSystemClfrStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.5.6.1.10
ntnSystemClfrPatternFormat This object indicates the data link layer packet format that is used when specifying pattern match data. A value of 'untagged(1)' indicates that the specified pattern match data does not include an 802.…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.6.1.11
ntnSystemClfrLabel A label used to reference the classifier entry in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.5.6.1.12
ntnSystemClfrSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.6.1.13
ntnSystemClfrVersion Version indicator for ntnSystemClfrTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.5.6.1.14
ntnSystemClfrUnknownIpMcast If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.15
ntnSystemClfrKnownIpMcast If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.16
ntnSystemClfrNonIpPkt If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this packet type. Version 2 attribute.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.17
ntnSystemClfrPatternIpVersion This object indicates the IP packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data can be specified without indicating the targ…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.6.1.18
ntnSystemClfrUnknownNonIpMcast If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.19
ntnSystemClfrKnownNonIpMcast If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this address type. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.5.6.1.20
ntnSystemClfrPatternL2Format This object indicates the L2 packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data can be specified without indicating the target…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.5.6.1.21

The Classifier Component Table identifies 
classification data from protocol, media and 
hardware specific tables and links the data 
to form a single classifier.

ntnClfrComponentEntry row .1.3.6.1.4.1.45.4.7.1.5.8.1

An entry in the Classifier Component Table
describes a collection of classification data
from a single protocol, media or hardware
specific classifier table. Entries within
this table are linked through a common set…

Indexes

ntnClfrComponentId

Column	Syntax	OID
ntnClfrComponentId An index that enumerates the classifier component entries. Managers can obtain new index values for row creation in this table by reading ntnClfrComponentNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.5.8.1.1
ntnClfrComponentSpecific Identifies an entry containing classification data in a protocol, media or hardware specific classifier table. Entries are referenced using a RowPointer value specifying the RowStatus attribute of the entry being i…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.5.8.1.2
ntnClfrComponentSetId Identifies a set of classifier data. Entries in this table with the same value for this attribute are considered components of the same classifier. This set identifier is used to reference this classification data f…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.5.8.1.3
ntnClfrComponentLabel A label used to reference the classifier component set in a textual manner. All members of the same component set, as determined by the value of the ntnClfrComponentSetId attribute, must have the same label. …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.5.8.1.4
ntnClfrComponentStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.5.8.1.5
ntnClfrComponentStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.5.8.1.6
ntnClfrComponentSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.8.1.7
ntnClfrComponentVersion Version indicator for ntnClfrComponentTable. Members of the same classifier component set must all have the same version information.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.5.8.1.8

The Classifier Block Table supports the 
ability to group individual classifiers 
into an unordered list, or block, of 
classifiers.

ntnClfrBlockEntry row .1.3.6.1.4.1.45.4.7.1.5.10.1

An entry in the Classifier Block Table
describes a single member of a group of
the classifiers. Each entry identifies
classification data, defined through the
Classifier Component Table (ntnClfrComponentTable).
Blo…

Indexes

ntnClfrBlockId

Column	Syntax	OID
ntnClfrBlockId An index that enumerates the classifier block entries. Managers can obtain new index values for row creation in this table by reading ntnClfrBlockNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.5.10.1.1
ntnClfrBlockNumber Identifies a group of classification entries. Entries in this table with the same value for this attribute are considered members of the same group (i.e., classifier block). This block identifier is used to referen…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.5.10.1.2
ntnClfrBlockClfrCompSetId Identifies a classifier component set in the Classifier Component Table (ntnClfrComponentTable) containing classification data. Component entries must exist prior to being referenced. It may be permissible to creat…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.5.10.1.3
ntnClfrBlockMeter This attribute identifies the meter that is associated with this classifier block. Meters are specified in the ntnQosMeterTable and associated tables. The corresponding instance in the ntnQosMeter class (i.e., the c…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.10.1.4
ntnClfrBlockAction This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified through this classifier block. The value of this attribute will not…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.10.1.5
ntnClfrBlockLabel A label used to reference the classifier group in a textual manner. All members of the same group, as determined by the value of the ntnClfrBlockNumber attribute, must have the same label. Version 1/2…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.5.10.1.6
ntnClfrBlockStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.5.10.1.7
ntnClfrBlockStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.5.10.1.8
ntnClfrBlockSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.5.10.1.9
ntnClfrBlockVersion Version indicator for ntnClfrBlockTable. Members of the same classifier block must all have the same version information.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.5.10.1.10
ntnClfrBlockPrecedence The relative order in which the classifier sets associated with this block are applied, with regard to other classifiers sets within the block. Higher numbers represent block members with higher precedence. Block memb…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.45.4.7.1.5.10.1.11

This table enumerates specific meters that 
a system may use to police a stream of traffic.
          
Specific meter details are to be found in 
table entry referenced by ntnQosMeterSpecific.

ntnQosMeterEntry row .1.3.6.1.4.1.45.4.7.1.6.2.1

An entry in the meter table describes a
single conformance level of a meter.

Indexes

ntnQosMeterId

Column	Syntax	OID
ntnQosMeterId An index that enumerates the Meter entries. Managers can obtain new index values for row creation in this table by reading ntnQosMeterNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.6.2.1.1
ntnQosMeterSucceedNext If the traffic being processed does conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for this data path. This RowPointer should point to an instance o…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.6.2.1.2
ntnQosMeterFailNext If the traffic being processed does not conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for this data path. This RowPointer should point to an insta…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.6.2.1.3
ntnQosMeterSpecific This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, ntnQosMeterSpecific ma…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.6.2.1.4
ntnQosMeterOutOfProfileStats Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this meter data that was deemed to be non-conformant (i.e., out-of-profile)…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.6.2.1.5
ntnQosMeterLabel A label used to reference the meter data in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.6.2.1.6
ntnQosMeterStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.6.2.1.7
ntnQosMeterStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.6.2.1.8
ntnQosMeterSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.6.2.1.9
ntnQosMeterVersion Version indicator for ntnQosMeterTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.6.2.1.10

Entries in this table enumerate a set of 
token bucket meter parameters that a system 
may use to police a stream of traffic. Such 
meters are modeled here as having a single 
rate and a single burst size. Multiple 
entries are used when multiple rates/burst 
sizes are needed.

ntnQosTBParamEntry row .1.3.6.1.4.1.45.4.7.1.6.4.1

An entry that describes a single set of
token bucket parameters.

Indexes

ntnQosTBParamId

Column	Syntax	OID
ntnQosTBParamId An index that enumerates the Token Bucket Parameter entries. Managers can obtain new index values for row creation in this table by reading ntnQosTBParamNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.6.4.1.1
ntnQosTBParamType The Metering algorithm associated with the Token Bucket parameters. The number and type of algorithms supported is implementation dependent. Potential algorithms include: ntnQosTBParamSimpleTokenBucke…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.45.4.7.1.6.4.1.2
ntnQosTBParamRate The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR and PIR in RFC 2698 for trTCM CTR and PTR in RFC 2859 for TSWTC…	kilobits per secondUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.45.4.7.1.6.4.1.3
ntnQosTBParamBurstSize The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS and EBS in RFC 2697 for srTCM CBS and PBS in RFC 2698 for trTCM Burs…	BytesINTEGRATED-SERVICES-MIBBurstSizer/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.45.4.7.1.6.4.1.4
ntnQosTBParamInterval The time interval used with the token bucket. This attribute is used for: Average Rate Meter (Informal DS Model section 5.2.1) - Delta Simple Token Bucket Meter (Informal DS Model 5.1) - time interval t…	microsecondsUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.45.4.7.1.6.4.1.5
ntnQosTBParamLabel A label used to reference the token bucket data in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.6.4.1.6
ntnQosTBParamStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.6.4.1.7
ntnQosTBParamStatus The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.6.4.1.8
ntnQosTBParamSessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.6.4.1.9
ntnQosTBParamVersion Version indicator for ntnQosTBParamTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.6.4.1.10
ntnQosTBParamMinRate The minimum token-bucket rate, in kilobits per second (kbps). Version 2 attribute.	kilobits per secondUnsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.45.4.7.1.6.4.1.11

Contains the current set of configured 
base actions. The actions are associated 
with classifiers, meters and interfaces 
through policies during operation.

ntnQosBaseActionEntry row .1.3.6.1.4.1.45.4.7.1.7.2.1

General action definitions. Each entry
specifies an instance of the ntnQosBaseAction
class which describes (potentially) several
distinct action attributes. Each action is
taken individually regarding the data in
q…

Indexes

ntnQosBaseActionId

Column	Syntax	OID
ntnQosBaseActionId An index that enumerates the QoS Base Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosBaseActionNextFree. Actions are associated with instances in other classes …	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.7.2.1.1
ntnQosBaseActionDrop This action attribute is used to specify whether a packet should dropped, switched (i.e., not dropped) or whether the decision to drop the packet should be deferred. The value 'drop(1)', when specified, …	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.7.2.1.2
ntnQosBaseActionUpdateDscp This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with the value of this object.	DscpUpdater/w Type Constraints: range: -1..64	.1.3.6.1.4.1.45.4.7.1.7.2.1.3
ntnQosBaseActionUpdateUserPriority This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this object. Specifying a value equal to 'deriv…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.7.2.1.4
ntnQosBaseActionSetDropPrecedence This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop precedence may be used to determine traffic precedence re…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.7.2.1.5
ntnQosBaseActionCopyToCpu This action attribute, when specified, has the ability to cause the packet being evaluated to be sent to the CPU for further processing. Extreme care should be taken when setting this object to 'true(1)' since this…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.7.2.1.6
ntnQosBaseActionMirrorFrame This action attribute, when specified, will cause the packet being evaluated to be sent to a predefined egress port for transmission in addition to the normal processing associated with the packet. Sp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.45.4.7.1.7.2.1.7
ntnQosBaseActionExtension Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a RowPointer value specifying the RowStatus attribute of…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.7.2.1.8
ntnQosBaseActionLabel A label used to reference the action entry in a textual manner.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.7.2.1.9
ntnQosBaseActionStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.7.2.1.10
ntnQosBaseActionStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.7.2.1.11
ntnQosBaseActionSessionId A session identifier used to reference transitory (volatile) data.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.7.2.1.12

Contains the current set of configured 
interface actions. The actions are associated 
with classifiers, meters and interfaces 
through policies during operation indirectly 
through extensions of other action entries.

ntnQosIfcActionEntry row .1.3.6.1.4.1.45.4.7.1.7.4.1

Interface action definitions. Each entry
specifies an instance of the ntnQosIfcAction
class which describes (potentially) several
distinct action attributes. Each action is
taken individually regarding the data in
…

Indexes

ntnQosIfcActionId

Column	Syntax	OID
ntnQosIfcActionId An index that enumerates the QoS Interface Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosIfcActionNextFree. Actions are associated with instances in other class…	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.7.4.1.1
ntnQosIfcActionUpdateVlanId This action attribute, when specified, will cause the Vlan Id in the frame being processed to be updated using the specified value. The Vlan Id value will not be updated based on QoS classification if the value of t…	Integer32r/w Constraints: range: -1--1 range: 1-4094	.1.3.6.1.4.1.45.4.7.1.7.4.1.2
ntnQosIfcActionSetEgressMask This action component, when specified, will cause the potential list of egress interfaces for a given packet to be limited to those interfaces that are included in the egress interface mask specified by this attribu…	OctetStringr/w Constraints: range: 0-0 range: 64-64	.1.3.6.1.4.1.45.4.7.1.7.4.1.3
ntnQosIfcActionSetEgressUcastIfc This action attribute supports redirection of normally-switched, known unicast packets to a specific interface. An egress interface is identified for redirection by setting this attribute to the logical ifIndex value…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.45.4.7.1.7.4.1.4
ntnQosIfcActionSetEgressNUcastIfc This action attribute supports redirection of normally-switched non-unicast (includes broadcast, multicast and flooded/unknown unicast) packets to a specific interface. An egress interface is identified for redirectio…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.45.4.7.1.7.4.1.5
ntnQosIfcActionExtension Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a RowPointer value specifying the RowStatus attribute of…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.45.4.7.1.7.4.1.6
ntnQosIfcActionLabel A label used to reference the action entry in a textual manner.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.7.4.1.7
ntnQosIfcActionStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.7.4.1.8
ntnQosIfcActionStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.7.4.1.9
ntnQosIfcActionSessionId A session identifier used to reference transitory (volatile) data.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.7.4.1.10

A policy class that applies a set of 
classifiers to interfaces specifying, for 
each association, the precedence order of 
the classifier with respect to other 
classifiers applied to the same interface 
and, for each policy, the action to take 
for a packet that matches the classifiers 
referenced by the policy. Interfaces are 
specified abstractly in terms of interface 
groups or roles.
          
This class may reference individual classifiers 
or blocks of classifiers. Classification data 
is identified by its type (i.e., single 
classifier or group of classifiers) and an 
identifier based on the type. A policy is 
formed by associating the classification data 
with an interface group, actions to be carried 
out based on classification and metering 
criteria, if applicable.

ntnQosPolicyEntry row .1.3.6.1.4.1.45.4.7.1.8.2.1

An instance of the ntnQosPolicy class. Instance
creation may be prohibited based on the status
of certain class attributes which must exist
prior to class instantiation.

Indexes

ntnQosPolicyId

Column	Syntax	OID
ntnQosPolicyId An index that enumerates the QoS Policy entries. Managers can obtain new index values for row creation in this table by reading ntnQosPolicyNextFree. Version 1/2 attribute.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.1
ntnQosPolicyClassifierType The type of classification resources that are being referenced by this QoS policy. This classifier type indication, together with the corresponding ntnQosPolicyClassifierId attribute, uniquely identifies the classif…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.8.2.1.2
ntnQosPolicyClassifierId This attribute identifies the classification data that is associated with this policy. It identifies either an individual classifier or a block of classifiers, based on the value of the ntnQosPolicyClassifierType at…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.8.2.1.3
ntnQosPolicyInterfaceRoles The interfaces to which this policy applies, specified in terms of a set of roles. The role combination specified by this attribute must exist in the ntnQosInterfaceTypeTable or the individual roles must exist in the…	POLICY-FRAMEWORK-PIBRoleCombinationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.4.7.1.8.2.1.4
ntnQosPolicyPrecedence The relative order in which the classifier elements associated with this policy are applied, with regard to other classifiers applied to the same group of interfaces in other policies. Higher numbers represent polic…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.8.2.1.5
ntnQosPolicyMeter This attribute identifies the meter that is associated with this QoS Policy instance. Meters are specified in the ntnQosMeterTable and associated tables. The corresponding instance in the ntnQosMeter class (i.e., th…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.6
ntnQosPolicyAction This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified via the classifier attributes. The value of this attribute will not…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.7
ntnQosPolicyNonMatchAction This attribute identifies the action that is to be initiated for flows that do not match the classification criteria being applied to the flow. Actions must be defined in the ntnQosBaseActionTable pr…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.8
ntnQosPolicyLabel A label used to reference the QoS policy entry in a textual manner. Version 1/2 attribute.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.8.2.1.9
ntnQosPolicyStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.8.2.1.10
ntnQosPolicyStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.8.2.1.11
ntnQosPolicyStats Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this policy data. If metering is specified, the statistics entry identif…	IndexIntegerOrZeror/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.12
ntnQosPolicyStatsType The type of statistics tracking used by this QoS policy. The value of this attribute dictates the amount of statistics tracking resources (i.e., counters) consumed by this policy. A value of 'individualClfr(1)' means…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.8.2.1.13
ntnQosPolicyInterfaceIndex An ifIndex value that is used to identify an interface to which the policy is to be applied. A policy is associated with an interface explicitly using this attribute or implicitly using a role combination through the nt…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.45.4.7.1.8.2.1.14
ntnQosPolicySessionId A session identifier used to reference transitory (volatile) data. Version 1/2 attribute.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.2.1.15
ntnQosPolicyVersion Version indicator for ntnQosPolicyTable.	VersionIndicatorr/w Type Values: 1 version1 2 version2	.1.3.6.1.4.1.45.4.7.1.8.2.1.16
ntnQosPolicyMeteringMode Identifies the metering mode associated with the policy. A value of 'noMetering(1)' indicates that metering is not associated with this policy. A 'policyBasedMetering(2)' value indicates th…	Enumeration	.1.3.6.1.4.1.45.4.7.1.8.2.1.17

This table contains counters for all the 
traffic passing through a processing element.

ntnQosCountActEntry row .1.3.6.1.4.1.45.4.7.1.8.4.1

An entry in the count action table describes
a single set of traffic counters.

Indexes

ntnQosCountActId

Column	Syntax	OID
ntnQosCountActId An index that enumerates the Count Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosCountActNextFree.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.8.4.1.1
ntnQosCountActOctets The number of octets processed by the associated data path element (e.g., policy, meter).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.4.1.2
ntnQosCountActPkts The number of packets processed by the associated data path element (e.g., policy, meter).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.4.1.3
ntnQosCountActStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.8.4.1.4
ntnQosCountActStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.8.4.1.5
ntnQosCountActSessionId A session identifier used to reference transitory (volatile) data.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.4.1.6

This table contains counters for all the 
traffic passing through a processing element 
at the policy/filter level.

ntnQosFilterStatsEntry row .1.3.6.1.4.1.45.4.7.1.8.5.1

An entry in the filter statistics table
describes a single set of traffic counters
for a specific policy/filter/interface
combination.

Indexes

ntnQosFilterStatsPolicyId ntnQosFilterStatsFilterId ntnQosFilterStatsInterfaceId

Column	Syntax	OID
ntnQosFilterStatsPolicyId An index component that identifies the policy associated with this Filter Statistics entry. This attribute has the same value as the ntnQosPolicyId attribute with which it is associated.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.8.5.1.1
ntnQosFilterStatsFilterId An index component that identifies the filter instance within a specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is associated with this Filter Statistics entry. If the…	IndexIntegerOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.5.1.2
ntnQosFilterStatsInterfaceId An index component that identifies the interface index referenced by the specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is associated with this Filter Statistics entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.4.7.1.8.5.1.3
ntnQosFilterStatsInProfileOctets The number of octets considered to be in-profile that have been processed by the associated data path classifier.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.5.1.4
ntnQosFilterStatsInProfilePkts The number of packets considered to be in-profile that have been processed by the associated data path classifier.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.5.1.5
ntnQosFilterStatsOutOfProfileOctets The number of octets considered to be out-of-profile that have been processed by the associated data path classifier.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.5.1.6
ntnQosFilterStatsOutOfProfilePkts The number of packets considered to be out-of-profile that have been processed by the associated data path classifier.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.45.4.7.1.8.5.1.7
ntnQosFilterStatsStorage The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object may not be modified if t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.8.5.1.8
ntnQosFilterStatsStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.8.5.1.9

This table contains attributes used to track 
the current level of hardware resource consumption 
related to installed policy data on an interface.

ntnQosPolicyDiagsEntry row .1.3.6.1.4.1.45.4.7.1.8.6.1

An entry in the QoS policy diagnostics table
describes a single set of resource utilization
data, related to installed policy data and
non-policy data that still consumes policy
resources, for a given interface.

Indexes

No indexes recorded

Column	Syntax	OID
ntnQosPolicyDiagsMasksConsumed Tracks the current number of classification masks in-use, due to installed policy and filter data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.1
ntnQosPolicyDiagsFiltersConsumed Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.2
ntnQosPolicyDiagsMetersConsumed Tracks the current number of meters in-use, due to installed policy data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.3
ntnQosPolicyDiagsNonQosMasksConsumed Tracks the current number of classification masks in-use, not due to installed policy and filter data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.4
ntnQosPolicyDiagsNonQosFiltersConsumed Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.5
ntnQosPolicyDiagsNonQosMetersConsumed Tracks the current number of meters in-use, not due to installed policy data, for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.6
ntnQosPolicyDiagsCountersConsumed Tracks the current number of counters in-use for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.7
ntnQosPolicyDiagsTotalMasksAvail Tracks the total number of classification masks available for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.8
ntnQosPolicyDiagsTotalFiltersAvail Tracks the total number of filters (i.e., rules) available for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.9
ntnQosPolicyDiagsTotalMetersAvail Tracks the total number of meters available for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.10
ntnQosPolicyDiagsTotalCountersAvail Tracks the total number of counters available for a given interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.6.1.11

This table contains attributes used to track 
the current level of hardware resource consumption 
related to installed policy data for a given
precedence level and interface when resources
are centrally allocated.

ntnQosPolicyPrecResDiagsEntry row .1.3.6.1.4.1.45.4.7.1.8.7.1

An entry in the QoS policy precedence resource
diagnostics table describes a single set of resource
utilization data, related to installed policy data
and non-policy data that still consumes policy
resources, for a g…

Indexes

ntnQosPolicyPrecResDiagsPrec ntnQosPolicyPrecResDiagsInterface

Column	Syntax	OID
ntnQosPolicyPrecResDiagsPrec The precedence value for which resource data is being returned. In a centralized architecture, a specific precedence value is typically associated with a bank or slice of filter (rule), meter and counter resources.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.8.7.1.1
ntnQosPolicyPrecResDiagsInterface The ifIndex value that is associated with this instance of the ntnQosPolicyPrecResDiagsEntry. The ifIndex value of this attribute corresponds to the ifTable entry with the same ifIndex value. When resou…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.4.7.1.8.7.1.2
ntnQosPolicyPrecResDiagsKeysConsumed Tracks the current number of classification keys in-use, due to installed policy and filter data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.3
ntnQosPolicyPrecResDiagsFiltersConsumed Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.4
ntnQosPolicyPrecResDiagsMetersConsumed Tracks the current number of meters in-use, due to installed policy data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.5
ntnQosPolicyPrecResDiagsNonQosKeysConsumed Tracks the current number of classification keys in-use, not due to installed policy and filter data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.6
ntnQosPolicyPrecResDiagsNonQosFiltersConsumed Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.7
ntnQosPolicyPrecResDiagsNonQosMetersConsumed Tracks the current number of meters in-use, not due to installed policy data, for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.8
ntnQosPolicyPrecResDiagsCountersConsumed Tracks the current number of counters in-use for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.9
ntnQosPolicyPrecResDiagsTotalKeysAvail Tracks the total number of classification keys available for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.10
ntnQosPolicyPrecResDiagsTotalFiltersAvail Tracks the total number of filters (i.e., rules) available for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.11
ntnQosPolicyPrecResDiagsTotalMetersAvail Tracks the total number of meters available for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.12
ntnQosPolicyPrecResDiagsTotalCountersAvail Tracks the total number of counters available for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.13
ntnQosPolicyPrecResDiagsRangeChkElemsConsumed Tracks the number of range check elements currently consumed for a given precedence level and interface. Note that range check resources may be centrally allocated (not interface-based) meaning that the resource usage d…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.14
ntnQosPolicyPrecResDiagsApplicationIdUsed Tracks the Id of application in-use for a given precedence level and interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.15
ntnQosPolicyPrecResDiagsApplicationNameUsed The name of application in-use for a given precedence level and interface.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.45.4.7.1.8.7.1.16
ntnQosPolicyPrecResDiagsRangeChkElemsAvail Tracks the total number of range check elements available for a given port cluster.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.8.7.1.17

Contains interface index to interface role
combination associations.

ntnQosIfAssignmentEntry row .1.3.6.1.4.1.45.4.7.1.9.1.1

A conceptual row in the ntnQosIfAssignmentTable.

Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II)
and a role combination with which the interface
is associated.

Indexes

ntnQosIfAssignmentIfIndex

Column	Syntax	OID
ntnQosIfAssignmentIfIndex The ifIndex value that is associated with this instance of the ntnQosIfAssignmentEntry. The ifIndex value of this attribute must correspond to the ifTable entry with the same ifIndex value.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.45.4.7.1.9.1.1.1
ntnQosIfAssignmentRoleCombination The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosIfAssignmentIfIndex.	POLICY-FRAMEWORK-PIBRoleCombinationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.45.4.7.1.9.1.1.2
ntnQosIfAssignmentQueueSet The queue set associated with this interface. A queue set must be defined in the ntnQosIfQueueTable prior to being referenced by this attribute.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.45.4.7.1.9.1.1.3
ntnQosIfAssignmentStorage The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.9.1.1.4
ntnQosIfAssignmentStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.9.1.1.5
ntnQosIfAssignmentCapabilities An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP. Also used to derive the capabilities that are common across several in…	Bits	.1.3.6.1.4.1.45.4.7.1.9.1.1.6

Contains information about the individual queues that
comprise a queue set implemented on the device.

ntnQosIfQueueEntry row .1.3.6.1.4.1.45.4.7.1.9.2.1

A conceptual row in the ntnQosIfQueueTable.

Each row identifies a specific queue within a given
queue set and contains detailed information about the
queue. Queues are associated with a given set through …

Indexes

ntnQosIfQueueId

Column	Syntax	OID
ntnQosIfQueueId An index that uniquely identifies an entry in the ntnQosIfQueueTable.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.9.2.1.1
ntnQosIfQueueSetId An index that uniquely identifies a specific queue set. The queue set that is identified with this value is associated with an interface through the ntnQosIfAssignmentQueueSet object in the ntnQosIfAssignmentTable. T…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.45.4.7.1.9.2.1.2
ntnQosIfQueueIndex An arbitrary index that uniquely identifies a specific queue within a set of queues that is identified by the ntnQosIfQueueSetId value.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.45.4.7.1.9.2.1.3
ntnQosIfQueueDiscipline This object identifies the queuing discipline that is associated with the specified queue. A value of fifo(1) indicates that the queue is serviced on a first-in-first-out (FIFO) basis. This discipline is…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.9.2.1.4
ntnQosIfQueueDrainSize The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the interface bandwidth allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.9.2.1.5
ntnQosIfQueueAbsBandwidth The maximum interface bandwidth that is available for consumption when servicing this queue. This bandwidth is specified in terms of kilobits per second. This attribute represents the absolute bandwidth t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.9.2.1.6
ntnQosIfQueueBandwidthAllocation This attribute specifies whether to configure the queue for an absolute bandwidth limit or one that is relative to other queues of the interface. i.e., whether to configure the queue using ntnQosIfQueueAbsBandwidth or n…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.9.2.1.7
ntnQosIfQueueServiceOrder This object is used to provide an additional level of priority that is required for certain queuing disciplines and when the different queues that comprise a queue set are serviced using a mix of queuing disciplines. Th…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.45.4.7.1.9.2.1.8
ntnQosIfQueueSize The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.45.4.7.1.9.2.1.9
ntnQosIfQueueStorage The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.9.2.1.10
ntnQosIfQueueStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.9.2.1.11

Interface role definitions. This class describes the
interface roles that exist on the device. An interface
role is denoted by its designated role identifier.

ntnQosInterfaceRoleEntry row .1.3.6.1.4.1.45.4.7.1.9.4.1

An instance of this class describes the characteristics
of an interface role. Interface role characteristics
include a role identifier, an interface class designation
and a filter capabilities attribute.

Indexes

ntnQosInterfaceRoleId

Column	Syntax	OID
ntnQosInterfaceRoleId An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceRole class. Class instances may not be contiguous.	DIFFSERV-MIBIndexInteger Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.45.4.7.1.9.4.1.1
ntnQosInterfaceRoleRole The role that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifiers are used within a number of classes to logically identify …	POLICY-FRAMEWORK-PIBRoler/w Type Constraints: range: 1..32	.1.3.6.1.4.1.45.4.7.1.9.4.1.2
ntnQosInterfaceRoleIfClass A value describing the overall classification of traffic received on interfaces with the given role. Traffic received on trusted interfaces may be processed differently and be subject to different restrictions that tr…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.9.4.1.3
ntnQosInterfaceRoleCapabilities An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP.	Bitsr/w	.1.3.6.1.4.1.45.4.7.1.9.4.1.4
ntnQosInterfaceRoleStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if th…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.45.4.7.1.9.4.1.5
ntnQosInterfaceRoleStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.45.4.7.1.9.4.1.6
ntnQosInterfaceRoleStatsTrackingType The value of this attribute determines if statistics tracking is enabled for system-level policies associated with the designated role. The ntnQosConfigTrackStatistics attribute value at the time the role is created pro…	Enumerationr/w	.1.3.6.1.4.1.45.4.7.1.9.4.1.7