NSCRTV-OSW Table View

Simulation parameters attribute table.

analogPropertyEntry row .1.3.6.1.4.1.17409.1.1.1.1

Attribute Table simulation parameters head.OID purpose as a table index, the coding method is 'length + OID.' OID before two members of the '130' is based on '1' and '3' respectively coding, and not ordinary OID encodin…

Indexes

analogParameterOID

Column	Syntax	OID
analogParameterOIDmandatory index	ObjectIdentifier	.1.3.6.1.4.1.17409.1.1.1.1.1
alarmEnablemandatory Alarm enable control byte, the corresponding position for the'1 'that allow alarm,'0' a ban warning Bit 0: Alarm enable low Bit 1: Alarm enable low Bit 2: Alarm enable high Bit 3: Alarm enable high Bit 4 ~ 7 reservation…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.17409.1.1.1.1.2
analogAlarmStatemandatory The parameters of the current state of alarm.	Enumeration Enumerated Values: 1 aasNominal 2 aasHIHI 3 aasHI 4 aasLO 5 aasLOLO	.1.3.6.1.4.1.17409.1.1.1.1.3
analogAlarmHIHImandatory The parameters of the current state of alarm.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.1.1.4
analogAlarmHImandatory HI high alarm threshold value. This object should be stored in non-volatile memory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.1.1.5
analogAlarmLOmandatory LO low alarm threshold value. This object should be stored in nonvolatile memory	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.1.1.6
analogAlarmLOLOmandatory Alarm LOLO very low threshold value. This object should be stored in nonvolatile memory.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.1.1.7
analogAlarmDeadbandmandatory Dead-alarm threshold value. After the warning, parameter values should be restored to the alarm threshold and alarm threshold and the difference between the absolute value greater than the value of dead zone, the alarm …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.1.1.8

Discrete Attribute Table

discretePropertyEntry row .1.3.6.1.4.1.17409.1.1.2.1

Attribute Table discrete head. OID coding methods with simulation attribute table.

Indexes

discreteParameterOID discreteAlarmValue

Column	Syntax	OID
discreteParameterOIDmandatory Attribute Table discrete index 1: Parameters OID	ObjectIdentifier	.1.3.6.1.4.1.17409.1.1.2.1.1
discreteAlarmValuemandatory Attribute Table discrete index 2: parameter values.When the equipment value of this parameter values, and so will be dealt with a warning	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.2.1.2
discreteAlarmEnablemandatory When the alarm so that it can open the (2 or 3), this parameter allows for alarm processin If the alarm so that it can shut down (1), alarm processing will be carried out. This object default values for the disable (1).…	Enumerationr/w Enumerated Values: 1 disable 2 enableMajor 3 enableMinor	.1.3.6.1.4.1.17409.1.1.2.1.3
discreteAlarmStatemandatory The parameters of the current state of alarm	Enumeration Enumerated Values: 1 dasNominal 6 dasDiscreteMajor 7 dasDiscreteMinor	.1.3.6.1.4.1.17409.1.1.2.1.4

The current alarm table.

currentAlarmEntry row .1.3.6.1.4.1.17409.1.1.3.1

The current warning Table Head. OID coding methods with simulation attribute table

Indexes

currentAlarmOID

Column	Syntax	OID
currentAlarmOIDmandatory NE, currently in a state of alarm parameters OID Index, and the alarm in the table attribute parameters OID counterparts.	ObjectIdentifier	.1.3.6.1.4.1.17409.1.1.3.1.1
currentAlarmStatemandatory Warning parameters of the current state of alarm	Enumeration Enumerated Values: 2 caasHIHI 3 caasHI 4 caasLO 5 caasLOLO 6 caasDiscreteMajor 7 caasDiscreteMinor	.1.3.6.1.4.1.17409.1.1.3.1.2
currentAlarmValuemandatory Alarm parameter values.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.1.3.1.3

Alarm record form, at least support 16 record. Each table in the registration of a new record, the management agent (transponder) managers should send traps news

alarmLogEntry row .1.3.6.1.4.1.17409.1.2.3.1

Alarm Sheet Head

Indexes

alarmLogIndex

Column	Syntax	OID
alarmLogIndexmandatory The only logo Alarm Index recorded a record in the table, the index value increased from 1 start of each new record, plus 1 until 32767, under a record index of the re-starts at 1. Acting under the management of storage…	Integer32 Constraints: range: 1-32767	.1.3.6.1.4.1.17409.1.2.3.1.1
alarmLogInformationmandatory Alarm record information, multi-byte strings, defined as follows: Byte 1 ~ 4: Alarm in time (POSIX format, the previous maximum byte) Byte 5: Alarm types (enumeration, definitions????) Byte 6: Alarm value after commonNe…	OctetString Constraints: range: 17-255	.1.3.6.1.4.1.17409.1.2.3.1.2

Multicast addresses Table, the value of this object should be stored in nonvolatile memory.

commonMulticastAddressEntry row .1.3.6.1.4.1.17409.1.3.2.1.1.3.1

Multicast addresses head table.

Indexes

commonMulticastAddressIndex

Column	Syntax	OID
commonMulticastAddressIndexmandatory Multicast addresses head table.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.17409.1.3.2.1.1.3.1.1
commonMulticastAddressNumbermandatory Multicast address, I / G-1 effective.	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.17409.1.3.2.1.1.3.1.2

Acting Information Table TRAP

commonAgentTrapEntry row .1.3.6.1.4.1.17409.1.3.3.1.7.1

Acting Head TRAP Information Table

Indexes

commonAgentTrapIndex

Column	Syntax	OID
commonAgentTrapIndexmandatory TRAP Table Index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.3.3.1.7.1.1
commonAgentTrapIPmandatory When the purpose of the TRAP host's IP address	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.17409.1.3.3.1.7.1.2
commonAgentTrapCommunitymandatory Send the Community string TRAP	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.1.7.1.3
commonAgentTrapStatusmandatory It said that the opening of TRAP	Enumerationr/w Enumerated Values: 1 commonAgentTrapEnable 2 commonAgentTrapDisable	.1.3.6.1.4.1.17409.1.3.3.1.7.1.4

Acting is currently public information management equipment list.

commonDeviceInfoEntry row .1.3.6.1.4.1.17409.1.3.3.2.2.1

Acting is currently public information management equipment list Table Head.

Indexes

commonDeviceSlot

Column	Syntax	OID
commonDeviceSlotmandatory Acting is currently under the management of the equipment list of public information table index.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.3.3.2.2.1.1
commonDevicesIDmandatory Designated equipment manufacturers logo	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.17409.1.3.3.2.2.1.2
commonDeviceVendormandatory Equipment manufacturers	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.3
commonDeviceModelNumbermandatory Equipment models.	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.4
commonDeviceSerialNumbermandatory The string of equipment.	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.5
commonDeviceVendorInfooptional Equipment suppliers of other special designated information	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.6
commonDeviceStatusmandatory Bit 0: RSVD0 Bit 1: RSVD1 Bit 2: RSVD2 Bit 3: MAJOR ALARMS Bit 4: MINOR ALARMS Bit 5: RSVD5 Bit 6: RSVD6 Bit 7: RSVD7	OctetString Constraints: range: 1-1	.1.3.6.1.4.1.17409.1.3.3.2.2.1.7
commonDeviceResetmandatory Write'1 'will be reset equipment, other values will be written into the non-functional. Reading this object return value'1 ', the equipment had no effect.	Enumerationr/w Enumerated Values: 1 reset	.1.3.6.1.4.1.17409.1.3.3.2.2.1.8
commonDeviceAlarmDetectionControlmandatory This object used to control equipment alarm detection.	Enumerationr/w Enumerated Values: 1 detectionDisabled 2 detectionEnabled 3 detectionEnabledAndRegenerate	.1.3.6.1.4.1.17409.1.3.3.2.2.1.9
commonDeviceMACAddressmandatory Equipment MAC address		.1.3.6.1.4.1.17409.1.3.3.2.2.1.10
commonDeviceTamperStatusoptional Report of the safety switch equipment (such as whether to open up the lid) state that this object is called discrete attributes of a corresponding entry in the table. Intact that normal, compromised expressed alarm.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.3.3.2.2.1.11
commonDeviceInternalTemperatureoptional Equipment Room (machine) temperature, units degrees Celsius. This request object attribute in a corresponding entry in the table	Integer32 Constraints: range: -128-127	.1.3.6.1.4.1.17409.1.3.3.2.2.1.12
commonDeviceResetCausemandatory Equipment that the reasons for the recent reduction	Enumeration Enumerated Values: 1 other 2 powerup 3 command 4 watchdog 5 craft	.1.3.6.1.4.1.17409.1.3.3.2.2.1.13
commonDeviceCraftStatusmandatory This object interface that local equipment (such as RS232 or RS485 interface) state.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.3.3.2.2.1.14
commonDevicesOIDmandatory Goals identifier string, point to a concrete realization of the equipment	ObjectIdentifier	.1.3.6.1.4.1.17409.1.3.3.2.2.1.15
commonDeviceAcctoptional Equipment that the accumulated work time, units of s		.1.3.6.1.4.1.17409.1.3.3.2.2.1.16
commonDeviceNamemandatory Equipment name	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.17
commonDeviceMFDmandatory Equipment manufacturing date.	SNMPv2-TCDisplayString Constraints: range: 10-10 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.18
commonDeviceFWmandatory Equipment firmware information	SNMPv2-TCDisplayString Constraints: range: 0-255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.3.3.2.2.1.19

Optical Switch Information Table

oswChannelEntry row .1.3.6.1.4.1.17409.1.15.4.1

Optical Switch Information Table Head

Indexes

oswIndex

Column	Syntax	OID
oswIndexmandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.15.4.1.1
oswInputAmandatory The input optical power of route A, unit in 0.1 dBm, this object require entry register in the attribute MIB.	Integer32 Constraints: range: -128-127	.1.3.6.1.4.1.17409.1.15.4.1.2
oswInputBmandatory The input optical power of route B, unit in 0.1 dBm, this object require entry register in the attribute MIB.	Integer32 Constraints: range: -128-127	.1.3.6.1.4.1.17409.1.15.4.1.3
oswOutput1mandatory The input optical power of route 1, unit in 0.1 dBm, this object require entry register in the attribute MIB.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.17409.1.15.4.1.4
oswOutput2mandatory The input optical power of route 2, unit in 0.1 dBm, this object require entry register in the attribute MIB.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.17409.1.15.4.1.5

DC Power Information Table

oswDCPowerEntry row .1.3.6.1.4.1.17409.1.15.7.1

DC Power Information Table Head

Indexes

oswDCPowerIndex

Column	Syntax	OID
oswDCPowerIndexmandatory DC Power Index, table oswDCPowerTable index	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17409.1.15.7.1.1
oswDCPowerVoltagemandatory Power supply voltage, unit in 0.1 V, this object require entry register in the attribute MIB.	Integer32 Constraints: range: -32768-32767	.1.3.6.1.4.1.17409.1.15.7.1.2
oswDCPowerCurrentmandatory Power supply current, unit in 0.1 A, this object require entry register in the attribute MIB.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.17409.1.15.7.1.3
oswDCPowerNamemandatory Mark Power supply name, for example: +5 V DC power supply. This field value regulated by the user, it should be marked with the number of the power supply voltage and distinguish the multi-power supplies at least. When …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.17409.1.15.7.1.4