NSCRTV-EPON-UNI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
58

uniAttributeTable

table
.1.3.6.1.4.1.17409.2.3.5.1 · 1 row entry · 8 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniAttributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniAttributeTable' 
A list of uniAttributeTable entries.
uniAttributeEntry row .1.3.6.1.4.1.17409.2.3.5.1.1
The uniAttributeEntry Information
Indexes
Column Syntax OID
uniAttributeDeviceIndex
Device Index

For OLT, set to corresponding ONU ID
For ONU, set to 0
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.5.1.1.1
uniAttributeCardIndex
Card Index
The value of this cardIndex depends on onuType.
fixed(1) - set to 0, to indicate slot num is meaningless.
chassisBased(2) - MUST NOT be zero
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.5.1.1.2
uniAttributePortIndex
Port Index
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.5.1.1.3
uniAdminStatus
Admin Status
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.5.1.1.4
uniOperationStatus
Operation Status
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.5.1.1.5
uniAutoNegotiationEnable
Whether or not to enable auto negotiation on the uni port
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.1.1.6
uniAutoNegotiationLocalTechAbility
This indicates the technology ability of the local device
NSCRTV-EPONEOC-EPON-MIBAutoNegotiationTechAbility
Type Values:
1tenBaseTFullDuplex
2tenBaseTHalfDuplex
3hundredBaseTFullDuplex
4hundredBaseTHalfDuplex
5thousandBaseTFullDuplex
6thousandBaseTHalfDuplex
7thousandBaseXFullDuplex
8thousandBaseXHalfDuplex
9fdxPause
10fdxApause
11fdxSpause
12fdxBpause
Description:
Technology ability of auto negotiation. Refer to
clause 30.6.1.1.5 of IEEE 802.3 2005 edition
 .1.3.6.1.4.1.17409.2.3.5.1.1.7
uniAutoNegotiationRestart
Restart the autonegotiation
Enumerationr/w
Enumerated Values:
1restart
 .1.3.6.1.4.1.17409.2.3.5.1.1.9

uniMacAddressTable

table
.1.3.6.1.4.1.17409.2.3.5.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniMacAddressTable' 
A list of MacAddress entries.
uniMacAddressEntry row .1.3.6.1.4.1.17409.2.3.5.2.2.1
The Mac Address Information
Indexes
Column Syntax OID
uniMacAddrIndex
Mac Address Index
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.17409.2.3.5.2.2.1.1
uniMacAddrVlanIdIndex
Mac Address Vlan Id Index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.2.2.1.2
uniMacAddrType
Mac Address Type
Enumerationr/w
Enumerated Values:
1static
2dynamic
3other
 .1.3.6.1.4.1.17409.2.3.5.2.2.1.3
uniMacAddrPortId
Mac Address Port Id
The first octet is slot ID, the second octet is port ID.
If the device is fixed (not modulized), set slot ID to 0.
Note that, slot here shall follow the last byte definition of
EponCardIndex to indi…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.17409.2.3.5.2.2.1.4
uniMacAddrRowStatus
delete,create. Update is not supported
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.5.2.2.1.5

uniTrunkGroupConfigTable

table
.1.3.6.1.4.1.17409.2.3.5.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniTrunkGroupConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniTrunkGroupConfigTable' 
A list of uniTrunkGroupConfigTable entries.
uniTrunkGroupConfigEntry row .1.3.6.1.4.1.17409.2.3.5.3.1.1
The uniTrunk Group Config Entry Information
Indexes
Column Syntax OID
uniTrunkGroupConfigIndex
Trunk Group Config Index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.3.1.1.1
uniTrunkGroupConfigName
Trunk Group Config Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.5.3.1.1.2
uniTrunkGroupConfigMember
Trunk Group Config Member.
It is presented by member port list. Each member port is identified
by 2-byte format, One for slot ID, the last for port ID. The actual
length of this string depends of the number…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.5.3.1.1.3
uniTrunkGroupConfigPolicy
Trunk Group Config Policy
Enumerationr/w
Enumerated Values:
1srcMac
2destMac
3srcMacNDestMac
4srcIp
5destIp
6srcIpNDestIp
 .1.3.6.1.4.1.17409.2.3.5.3.1.1.4
uniTrunkGroupConfigRowstatus
Trunk Group Config Rowstatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.5.3.1.1.5

uniTrunkGroupTable

table
.1.3.6.1.4.1.17409.2.3.5.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniTrunkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniTrunkGroupTable' 
a list of uniTrunkGroupConfigTable entries.
uniTrunkGroupEntry row .1.3.6.1.4.1.17409.2.3.5.3.2.1
Trunk Group Entry
Indexes
Column Syntax OID
uniTrunkGroupIndex
Trunk Group Index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.3.2.1.1
uniTrunkGroupOperationStatus
Trunk Group Operation Status
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.5.3.2.1.2
uniTrunkGroupActualSpeed
Trunk Group Actual Speed.
The speed is the aggregated rates of all operational UP member
ports of the trunk.
For example, 4 member ports of the trunk, two are UP, each is 1000M
then the SUN is 20…
MbpsInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.3.2.1.3
uniTrunkGroupAdminStatus
Trunk Group AdminStatus
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.17409.2.3.5.3.2.1.4

uniPortRateLimitTable

table
.1.3.6.1.4.1.17409.2.3.5.4 · 1 row entry · 10 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniPortRateLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniPortRateLimitTable' 
A list of PortRateLimit entries.
uniPortRateLimitEntry row .1.3.6.1.4.1.17409.2.3.5.4.1
The Port Rate Limit Information
Indexes
Column Syntax OID
uniPortRateLimitDeviceIndex
device Index

For OLT, set to corresponding ONU ID
For ONU, set to 0
NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Description:
Epon olt/onu?豸?????š?
ONU ID????ɣ?4?ֽڣ?????--?ͣ?
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit
Note:
----
1. OLT device must not be 0.
2. Card here shall confirm the …
 .1.3.6.1.4.1.17409.2.3.5.4.1.1
uniPortRateLimitCardIndex
card Index
The value of this cardIndex depends on onuType.
fixed(1) - set to 0, to indicate slot num is meaningless.
chassisBased(2) - MUST NOT be zero
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.5.4.1.2
uniPortRateLimitPortIndex
port Index
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.5.4.1.3
uniPortInCIR
Committed Information Rate(CIR) in kbps.
kbpsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.4.1.4
uniPortInCBS
Committed Burst Rate(CBS) in kbyte.
KbytesInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.4.1.5
uniPortInEBS
ebs in kbytes.
KbytesInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.4.1.6
uniPortOutCIR
Committed Information Rate(CIR) in kbps.
KbpsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.4.1.7
uniPortOutPIR
PIR in kbps.
KbpsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.4.1.8
uniPortInRateLimitEnable
Whether or not to enable or disable ingress rate limit for the UNI.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.4.1.9
uniPortOutRateLimitEnable
Whether or not to enable or disable egress rate limit for the UNI.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.4.1.10

uniMirrorTable

table
.1.3.6.1.4.1.17409.2.3.5.5 · 1 row entry · 6 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniMirrorTable' 
a list of uniMirrorTable entries.
uniMirrorEntry row .1.3.6.1.4.1.17409.2.3.5.5.1
The Mirror Information.
Indexes
Column Syntax OID
uniMirrorGroupIndex
Mirror Group Index
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.5.1.1
uniMirrorGroupName
Mirror Group Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.17409.2.3.5.5.1.2
uniMirrorGroupDstPortList
Mirror Group Dst Port List.
It is presented by port list. Each port is identified by
2-byte format, One for slot ID, the last for port ID. The
actual length of this string depends of the number of
ports …
OctetStringr/w .1.3.6.1.4.1.17409.2.3.5.5.1.3
uniMirrorGroupSrcInPortList
Mirror Group Src In Port List.
It is presented by port list. Each port is identified by
2-byte format, One for slot ID, the last for port ID. The
actual length of this string depends of the number of
por…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.5.5.1.4
uniMirrorGroupSrcOutPortList
Mirror Group Src Out Port List.
It is presented by port list. Each port is identified by
2-byte format, One for slot ID, the last for port ID. The
actual length of this string depends of the number of
po…
OctetStringr/w .1.3.6.1.4.1.17409.2.3.5.5.1.5
uniMirrorGroupRowstatus
Mirror Group Rowstatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17409.2.3.5.5.1.6

uniBroadcastStormSuppressionTable

table
.1.3.6.1.4.1.17409.2.3.5.6 · 1 row entry · 11 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniBroadcastStormSuppressionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniBroadcastStormSuppressionTable' 
A list of BroadcastStormSuppression entries.
uniBroadcastStormSuppressionEntry row .1.3.6.1.4.1.17409.2.3.5.6.1
The Broadcast Storm Suppression Information
Indexes
Column Syntax OID
uniBroadcastStormSuppressionCardIndex
card Index

The value of this cardIndex depends on onuType.
fixed(1) - set to 0, to indicate slot num is meaningless.
chassisBased(2) - MUST NOT be zero
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.5.6.1.1
uniBroadcastStormSuppressionPortIndex
port Index
NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.5.6.1.2
uniUnicastStormEnable
Cast Storm Enable
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.6.1.3
uniUnicastStormInPacketRate
Cast Storm In Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.4
uniUnicastStormOutPacketRate
Cast Storm Out Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.5
uniMulticastStormEnable
true(1) false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.6.1.6
uniMulticastStormInPacketRate
Multicast Storm In Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.7
uniMulticastStormOutPacketRate
Multicast Storm Out Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.8
uniBroadcastStormEnable
true(1) false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.6.1.9
uniBroadcastStormInPacketRate
Broadcast Storm In Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.10
uniBroadcastStormOutPacketRate
Broadcast Storm Out Packet Rate
ppsInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.6.1.11

uniExtAttributeTable

table
.1.3.6.1.4.1.17409.2.3.5.7 · 1 row entry · 9 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk uniExtAttributeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-UNI-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-UNI-MIB::uniExtAttributeTable' 
The extended attribute list for each UNI.
uniExtAttributeEntry row .1.3.6.1.4.1.17409.2.3.5.7.1
Indexes
Column Syntax OID
uniExtAttributeCardIndex
Card index
The value of this cardIndex depends on onuType.
fixed(1) - set to 0, to indicate slot num is meaningless.
chassisBased(2) - MUST NOT be zero
NSCRTV-EPONEOC-EPON-MIBEponCardIndex
Description:
?忨??????
For easy presenting the chassis view by NMS, bCardIndex shall be formatted
in a following manner:
Four bytes of INTEGER, from the most significant byte to the least signific…
 .1.3.6.1.4.1.17409.2.3.5.7.1.1
uniExtAttributePortIndex
 NSCRTV-EPONEOC-EPON-MIBEponPortIndex
Type Constraints:
range: 0..255
Description:
Epon?˿???????
The device port number shall start from 1. Nunber 0 had specific meaning, stands
for portIndex is meaningless, for the situation defined.
 .1.3.6.1.4.1.17409.2.3.5.7.1.2
uniPerfStats15minuteEnable
true(1) false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.7.1.3
uniPerfStats24hourEnable
true(1) false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.7.1.4
uniLastChangeTime
Last Change Time
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17409.2.3.5.7.1.5
uniIsolationEnable
true(1) false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.17409.2.3.5.7.1.6
uniMacAddrLearnMaxNum
Mac Address Learn Max Num
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.17409.2.3.5.7.1.7
uniAutoNegotiationAdvertisedTechAbility
Refer to clause 30.6.1.1.6 of IEEE 802.3 2005 edition
NSCRTV-EPONEOC-EPON-MIBAutoNegotiationTechAbilityr/w
Type Values:
1tenBaseTFullDuplex
2tenBaseTHalfDuplex
3hundredBaseTFullDuplex
4hundredBaseTHalfDuplex
5thousandBaseTFullDuplex
6thousandBaseTHalfDuplex
7thousandBaseXFullDuplex
8thousandBaseXHalfDuplex
9fdxPause
10fdxApause
11fdxSpause
12fdxBpause
Description:
Technology ability of auto negotiation. Refer to
clause 30.6.1.1.5 of IEEE 802.3 2005 edition
 .1.3.6.1.4.1.17409.2.3.5.7.1.8
uniMacAddrClearByPort
Clear MAC address by UNI port.
clearDynamic(1) - Clear all dynamic MAC address learned on the UNI port
Enumerationr/w
Enumerated Values:
1clearDynamic
 .1.3.6.1.4.1.17409.2.3.5.7.1.9